Yüklüyor…
TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings
This collection features papers presented at the 146th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.
| Müşterek Yazar: | |
|---|---|
| Diğer Yazarlar: | |
| Materyal Türü: | e-Kitap |
| Dil: | İngilizce |
| Baskı/Yayın Bilgisi: |
Cham :
Springer International Publishing :
2017.
Imprint: Springer, |
| Edisyon: | 1st ed. 2017. |
| Seri Bilgileri: | The Minerals, Metals & Materials Series,
|
| Konular: | |
| Online Erişim: | Full-text access |
İçindekiler:
- Part 1: 2017 Symposium on Functional Nanomaterials: Emerging Nanomaterials and Nanotechnology
- High-performance Supercapacitors Based on Hierarchical VOx Microspheres Forming from Hyperbranched Nanoribbons
- Potential of Magnetotactic Bacteria for the Fabrication of Iron Nanoparticles
- Facile Green Synthesis and Characterization of Water-soluble Superparamagnetic Iron Oxide Nanoparticles-gold Porphyrin Conjugate for Improved Photodynamic Therapy
- Synthesis of AgNP's from Industrial Wastes
- Synthesis of Mn2O3 Nanopowders with Urea and Citric Acid by Solution Combustion Route
- Part 2: Additive Manufacturing of Metals: Establishing Location-Specific Processing-Microstructure-Property Relationships
- Evolution of Aluminum Alloys Structure at Production Phases of 3D Products by Methods of Additive Technologies
- Characterization of Multiperforated Plates Manufactured by SLM and EBM for Aeroengine Applications
- Direct Laser Metal Deposition of Eutectic Al-Si Alloy for Automotive Applications
- Additive Manufacturing to Produce Standard and Custom Alloy Titanium
- Aiming for Modeling-assisted Tailored Designs for Additive Manufacturing
- Part 3: Additive Manufacturing: Building the Pathway towards Process and Material Qualification
- The Use of Laser Ultrasound to Detect Defects in Laser Melted Parts
- SLM Process Variables and Part Geometry Optimization Based on Numerical Prediction of Process Induced Distortions
- Optimizing, Fabricating and Characterizing Additively Manufactured Process Tubing
- Scaling Relationships for Direct Ink Writing with Acoustic Focusing
- The Influence of Gas Cooling in Context of Wire Arc Additive Manufacturing: A Novel Strategy of Affecting Grain Structure and Size
- Microstructure and Mechanical Properties of Laser Deposited Ni/WC Metal Matrix Composite Coatings
- Composite Powder Consolidation Using Selective Laser Melting: Input Energy/Porosity Morphology/Balling Effect Relation
- Part 4: Advanced Characterization Techniques for Quantifying and Modeling Deformation Mechanisms
- Strain Localization Structures in Textured Magnesium AZ31 under Reversed Loading via Multi-scale Digital Image Correlation
- Deformation and Strengthening Mechanisms in AISI 321 Austenitic Stainless Steel under both Dynamic and Quasi-static Loading Conditions
- Analysis of Dislocation Structures in Ferritic and Dual Phase Steels Regarding Continuous and Discontinuous Loading Paths
- Microstructural Characterization of Inconel 600 Tubes after Tensile Tests at Various Temperatures and Strain Rates
- Part 5: Advanced High-Strength Steels
- Influences of Thermomechanical Treatments on the Microstructure Evolution and Mechanical Properties of Nano-precipitates Strengthened Steels
- Effects of Solid Solution Treatment on the Microstructure and Mechanical Properties in the Ultra-high Strength Steel Strengthened by Nanoscale Particles
- Effects of Microstructure on the Strain Rate Sensitivity of Advanced Steels
- Part 6: Advanced Materials in Dental and Orthopedic Applications
- Characterization of Chitin Synthesized from Snail Shell
- Titanium-magnesium Composite for Dental Implants (BIACOM)
- Part 7: Alloys and Compounds for Thermoelectric and Solar Cell Applications V
- Thermoelectric Behaviour of Polyvinyl Acetate /CNT Composites
- Part 8: Applications of Solidification Fundamentals
- Microstructure Characteristics of A356 Nanocomposites Manufactured Via Ultrasonic Cavitation Processing under Controlled Solidification Conditions
- Part 9: Biological Materials Science
- Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants
- Osteoporosis and fatigue fracture prevention by analysis of bone microdamage
- Bone Remodeling under Tooth Loading
- Investigating Biochemical Constituents of Cymbopogon citratus Leaf: Prospects on Total Corrosion of Concrete Steel-rebar in Acidic-Sulphate Medium
- Two-step sintering effects on the microstructure and mechanical properties of forsterite scaffolds
- Part 10: Bulk Metallic Glasses XIV
- Material Behavior in Micro Milling of Zirconium based Bulk Metallic Glass
- Part 11: Computational Thermodynamics and Kinetics
- Comparison of the Phase-field Models to Predict the Recrystallization Kinetics
- Surface Reaction and Transport in Oxides Formed on FeCrAl Alloys in High Temperature Nitridation Environments
- Atomic Scale Modeling of Fe-Al-Mn-C Alloy using Pair Models and Monte-Carlo Calculations
- Control Technique Study of Non-metallic Inclusions in Low Carbon Steel by Rare Earth Final Deoxidization
- Effect of Cooling Rate on Phase Transformation and Microstructure Evolution in a Large Size Forged Ingot of Medium Carbon Low Alloy Steel
- Formation and Control of CaS Inclusion in Gear Steel 20MnCr5
- Investigations on the Mechanical Deformation of Amorphous Alloy Nanowires Using Phase-field Modeling and Thermodynamics Avalanche Models
- Thermodynamic Modeling of Al-Fe-Cr Ternary System
- Part 12: Defects and Properties of Cast Metals
- AModeling and Experimental Investigation on the Formation of Acicular Silicon and Sludge in High Pressure Die Casting of a Modified A383 Alloy
- Hot-tearing of Multicomponent Al-Cu Alloys Based on Casting Load Measurements in a Constrained Permanent Mold
- Effect of Molybdenum Content, Pouring Temperature and Cooling Rate on the Casting Defects of High Chromium White Cast Iron
- Effect of Various Aluminum Content on the Formation of Inclusion
- Effect of Segregated Alloying Elements on the High Strength Steel Properties: Application to the Large Size Ingot Casting Simulation
- Thermal-Mechanical Model of Depression Formation in Steel Continuous Casting
- Study for the Initiation Locations of Longitudinal Surface Cracks on Beam Blank in the Mold of Continuous Casting
- The Influence of SEN and Upper Nozzle Design on the Flow Character for the Slab Quality
- Effect of the Addition of Ce and Si on the Hot Cracking Behavior of SiMn Alloy during the Solidification Process
- Modeling and Predication of Shrinkage Porosity Formation in Steel Ingot
- Numerical Analysis of Coupled Turbulent Flow and Macroscopic Solidification in a Billet Continuous Casting Mold with Electromagnetic Stirring
- Part 13: Environmentally Assisted Cracking: Theory and Practice
- Hydrogen embrittlement and hydrogen-enhanced strain-induced vacancies in a-iron
- Factors causing hydrogen embrittlement of cold-drawn pearlitic steel fractured under elastic/plastic region
- Corrosion of Nickel-Titanium, C110, and Al6061 in Gallium-based Liquid Metal Alloys
- Part 14: General Poster Session
- Synthesis and characterization of Al-B4C powders by mechanical alloying
- Direct Conversion of Celestite to SrCO3 by Wet Milling
- Part 15: High Temperature Electrochemistry III
- Electrochemistry in Molten LiF-BeF2 Salt for Fluoride Salt-Cooled High Temperature Reactor Applications
- Impurity Removal from Titanium Oxycarbide
- Next-Generation Molten Oxide Energy Materials R&D
- Effects of Oxide Precursor Preparation Parameters on the Electrochemical Reduction of Tantalum Pentoxide in Calcium Chloride Melt
- The Effect of Temperature on Electrochemical Codeposition of Mg-Ni Hydrogen Storage Alloys from Molten Salt System
- Part 16: Materials and Fuels for the Current and Advanced Nuclear Reactors VI
- Diffusion Studies in the Development of an FCCI Barrier for High-Burnup Metallic Nuclear Fuel
- Part 17: Materials Engineering of Soft Magnets for Power and Energy Applications
- Development of Mold Inductor for Power Conversion System
- Effect of Annealing Time on the Texture of a 2.8% Si Non-Oriented Electrical Steel after Inclined and Skew Rolling
- Multi-parameter Magnetic Material Characterization for High Power Medium Frequency Converters
- Part 18: Phase Transformations and Microstructural Evolution
- An Experimental Assessment of the a +a' Miscibility Gap in Fe-Cr
- Phase Transformation, Microstructural Evolution and Property Modification in Rapidly Solidified Grey Cast Iron
- Morphologyof Order-disorder Structures in Rapidly Solidified L12intermetallics
- Part 19: Recent Developments in Biological, Structural and Functional Thin Films and Coatings
- Development of Enamel Coatings in Accordance with Recent Regulations of Food Contact Materials
- Transmission Probability of Diffusing Particles - A Case Study
- Preparation of Porous Titanium Oxide Film by Sol-Gel Method
- Part 20:
- Solid State Precipitation
- Hydride Precipitates in Zirconium Alloys: Evolution of Dissolution and Precipitation Temperatures during Thermal Cycling Correlated to Microstructure Features
- Analysis of Beta´ Cu4Ti Precipitation in Cu-Ti Alloys by Conventional and Diffusion-couple Methods
- Carbide Precipitation in a Low-alloy Ferritic Steel
- Part 21: Student-Run Symposium: Building Bridges - Connecting Academic and Industry Research
- Fundamental Principles for a Successful Collaboration between University and Metalworking Industries.