Yüklüyor…
Dynamic Behavior of Materials, Volume 1 Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /
Dynamic Behavior of Materials, Volume 1 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the first volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection present...
Müşterek Yazar: | |
---|---|
Diğer Yazarlar: | , , |
Materyal Türü: | e-Kitap |
Dil: | İngilizce |
Baskı/Yayın Bilgisi: |
Cham :
Springer International Publishing :
2019.
Imprint: Springer, |
Edisyon: | 1st ed. 2019. |
Seri Bilgileri: | Conference Proceedings of the Society for Experimental Mechanics Series,
|
Konular: | |
Online Erişim: | Full-text access |
İçindekiler:
- Chapter 1.Error Analysis for Shock Equation of State Measurements in Polymers using Manganin Gauges
- Chapter 2.Ballistic Impact Experiments and Quantitative Assessments of Mesoscale Damage Modes in a Single-layer Woven Composite
- Chapter 3.A Novel Approach for Plate Impact Experiments to Obtain Properties of Materials under Extreme Conditions
- Chapter 4.Effect of the Ratio of Charge Mass to Target Mass on Measured Impulse
- Chapter 5.Fracture and Failure Characterization of Transparent Acrylic based graft Interpenetrating Polymer Networks (graft-IPNs)
- Chapter 6.Dynamic Crack Branching in Soda-lime Glass: An Optical Investigation using Digital Gradient Sensing
- Chapter 7.A Hybrid Experimental-Numerical Study of Crack Initiation and Growth in Transparent Bilayers Across a Weak Interface
- Chapter 8.Inelastic Behavior of Tungsten-Carbide in Pressure-Shear Shock Experiments beyond 20 GPa
- Chapter 9.Mechanical Response and Damage Evolution of High-Strength Concrete under Triaxial Loading
- Chapter 10.Heterodyne Diffracted Beam Photonic Doppler Velocimeter (DPDV) for Pressure-Shear Shock Experiments
- Chapter 11.An Optimization Based Approach to Design a Complex Loading Pattern Using a Modified Split Hopkinson Pressure Bar
- Chapter 12.Development of "Dropkinson" Bar for Intermediate Strain-rate Testing
- Chapter 13.Radial Inertia Effect on Dynamic Compressive Response of Polymeric Foam Materials
- Chapter 14.Keynote: Examining Material Response using X-ray Phase Contrast Imaging (40-min)
- Chapter 15.Historical Note: Machining, Strain Gages, and a Pulse-heated Kolsky Bar
- Chapter 16.Improved Richtmyer-Meshkov Instability Experiments for Very-High-Rate Strength & Application to Tantalum
- Chapter 17.Mechanical Characterization and Numerical Material Modeling of Polyurea
- Chapter 18.Full-Scale Testing and Numerical Modeling of Adhesively Bonded Hot Stamped Ultra-High Strength Steel Hat Sections
- Chapter 19.Mechanical Characterization of ZrO2 Rich Glass Ceramic
- Chapter 20.Microstructure Characterization of Electrodeposited Nickel Tested at High Strain Rates
- chapter 21.The Flow Stress of AM IN 625 Under Conditions of High Strain and Strain Rate
- Chapter 22.Proton Radiography of Reverse Ballistic Impacts
- Chapter 23.The Effect of ECAE on the Ballistic Response of AZ31
- Chapter 24.Development of an Interferometer and Schlieren-based Measurement Technique for Resolving Cavitation Pressure Fields
- Chapter 25.Quasi-static and Dynamic Poisson's Ratio Evolution of Hyperelastic Foams
- Chapter 26.Revisit of Dynamic Brazilian Tests of Geomaterials
- Chapter 27.Interface Chemistry Dependent Mechanical Properties in Energetic Material using Nano-scale Impact Experiment
- Chapter 28.Optimization of an Image-based Experimental Setup for the Dynamic Behaviour Characterization of Materials
- chapter 29.High Strain Rate Response of Adhesively Bonded Fiber-Reinforced Composite Joints - A Computational Study to Guide Experimental Design
- Chapter 30.Pressure-Shear Plate Impact Experiments on Soda-Lime Glass at Pressures Beyond 20 GPa
- Chapter 31.Dynamic Mechanical Response of T800/F3900 Composite under Tensile and Compressive Loading
- Chapter 32.Experimental Investigation of Rate Sensitive Mechanical Response of Polyurea
- Chapter 33.Experimental Study on Dynamic Fracture Response of Al6063-T6 under High Rates of Loading
- Chapter 34.Ballistic and Material Tests and Simulations on Ultra-High Performance Concrete
- Chapter 35.Mechanical Behavior of Ta at Extreme Strain-rates
- Chapter 36.Constitutive Modeling of Polyamide Split Hopkinson Pressure Bars for the Design of a Pre-stretched Apparatus
- Chapter 37.Investigating the Mechanical and Thermal Relationship for Epoxy Blends
- Chapter 38.A Novel Auxetic Structure with Enhanced Impact Performances by Means Of Periodic Tessellation with Variable Poisson's Ratio
- Chapter 39.On the Response of Polymer Bonded Explosives at Different Impact Velocities
- Chapter 40.Meso-scale Dynamic Behavior of Cast Magnesium at High Strain Rate Loading
- Chapter 41.Energy Absorption Characteristics of Graded Foams Subjected to High Velocity Loading
- Chapter 42.Residual Structural Capacity of a High-Performance Concrete
- Chapter 43.Dynamic Mode II Fracture Response of PMMA Within an Aquatic Environment
- Chapter 44.An Image-Based Inertial Impact Test for the High Strain Rate Properties of Brittle Materials
- Chapter 45.An Image-Based Approach for Measuring Dynamic Fracture Toughness
- Chapter 46.The Effect of In-plane Properties on the Ballistic Response of Polyethylene Composites
- Chapter 47.Storage and Loss Moduli of Low-impedance Materials at kHz Frequencies
- Chapter 48.Effects of Pressure and Strain Rate on the Mechanical Behavior of Glassy Polymers
- Chapter 49.The Role of Texture on the Strain-Rate Sensitivity of Mg and Mg Alloy AZ31B
- Chapter 50.Shock Compaction of Al Powder Examined by X-Ray Phase Contrast Imaging
- Chapter 51.Compression Wave Profiles in Shock Loaded Polymer-metal Composites
- Chapter 52.High-Strain Rate Interlaminar Shear Testing of Fibre-Reinforced Composites Using an Image-Based Inertial Impact Test
- Chapter 53. Mechanical Behavior and Deformation Mechanisms of Mg in Shear Using In-Situ Synchrotron Radiation X-Ray Diffraction
- Chapter 54.Developing an Alternative to Roma Plastilina #1 as a Ballistic Backing Material for Body Armor Evaluation
- Chapter 55.IBI Test for High Strain Rate Tensile Testing of Adhesives
- Chapter 56.Modified Digital Gradient Sensors with Higher Measurement Sensitivity for Evaluating Stress Gradients in Transparent Solids
- Chapter 57.Quantitative Visualization of Sub-micron Deformations and Stresses at Sub-microsecond Intervals in Soda-lime Glass Plates
- Chapter 58.Microstructural Effects in the High Strain Rate Ring Fragmentation of Copper
- Chapter 59.Uncertainties in Low-Pressure Shock Experiments on Heterogeneous Materials
- Chapter 60.Effects of Liquid Viscosity on Wave Propagation Through Submerged Granular Media
- Chapter 61.Numerical Study of the Failure Mechanism of Ceramics during Low Velocity Impact Used In Protective Systems
- Chapter 62.Influence of High Strain Rate Transverse Compression on the Tensile Strength of Polyethylene Ballistic Single Fibers
- Chapter 63.The Utility of 3D Digital Image Correlation for Characterizing High-Rate Deformation
- Chapter 64.Characterization of Dynamic Deformation and Failure of Novel Light Weight Steel Alloy
- Chapter 65.Dynamic Fragmentation of MAX Phase Ti3SiC2 from Edge-On Impact Experiments
- Chapter 66.Application of High-speed DIC to Study Damage of Thin Membranes under Blast.