Search Results - Nuclear factors Materials.

Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors

Table of Contents: “…-- Aqueous Degradation in Harvested Medium Voltage Cables in Nuclear Power Plants -- Frequency Domain Reflectometry Modeling and Measurement for Nondestructive Evaluation of Nuclear Power Plant Cables -- Aging Mechanisms and Nondestructive Aging Indicator of Filled Cross-linked Polyethylene (XLPE) Exposed to Simultaneous Thermal and Gamma Radiation -- Successful Detection of Insulation Degradation in Cables by Frequency Domain Reflectometry -- Capacitive Nondestructive Evaluation of Aged Cross-Linked Polyethylene (XLPE) Cable Insulation Material -- C-2: Tracking of Nuclear Cable Insulation Polymer Structural Changes using the Gel Fraction and Uptake Factor Method -- C-4: Degradation of Silicone Rubber Analyzed by Instrumental Analyses and Dielectric Spectroscop.…”
Full-text access

Risk Based Technologies

Table of Contents: “…Chapter 1: Introduction -- Chapter 2: Materials Reliability -- Chapter 3: Structural Risk Assessment -- Chapter 4: Software risk and asset management -- Chapter 5: Human Factor Engineering for Complex Engineering Scenarios -- Chapter 6: Reliability and risk engineering - Academic aspects -- Chapter 7: Condition Monitoring and Prognosis - An asset Management Approach -- Chapter 8: Structural Reliability -- Chapter 9: Risk Management in First of its Kind Mega Project - A Case Study on Indian PFBR -- Chapter 10: Design for Reliability Approach to Electronics in Nuclear Plant Environment -- Chapter 11: Passive thermal hydraulic system reliability - AHWR Challange -- Chapter 12: Risk and Reliability Management Approach to Strategic System -- Chapter 13: Fatigue & Fracture Risk Assessment.…”
Full-text access

TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings

Table of Contents: “…Part 1: 2017 Symposium on Functional Nanomaterials: Emerging Nanomaterials and Nanotechnology -- High-performance Supercapacitors Based on Hierarchical VOx Microspheres Forming from Hyperbranched Nanoribbons -- Potential of Magnetotactic Bacteria for the Fabrication of Iron Nanoparticles -- Facile Green Synthesis and Characterization of Water-soluble Superparamagnetic Iron Oxide Nanoparticles-gold Porphyrin Conjugate for Improved Photodynamic Therapy -- Synthesis of AgNP's from Industrial Wastes -- Synthesis of Mn2O3 Nanopowders with Urea and Citric Acid by Solution Combustion Route -- Part 2: Additive Manufacturing of Metals: Establishing Location-Specific Processing-Microstructure-Property Relationships -- Evolution of Aluminum Alloys Structure at Production Phases of 3D Products by Methods of Additive Technologies -- Characterization of Multiperforated Plates Manufactured by SLM and EBM for Aeroengine Applications -- Direct Laser Metal Deposition of Eutectic Al-Si Alloy for Automotive Applications -- Additive Manufacturing to Produce Standard and Custom Alloy Titanium -- Aiming for Modeling-assisted Tailored Designs for Additive Manufacturing -- Part 3: Additive Manufacturing: Building the Pathway towards Process and Material Qualification -- The Use of Laser Ultrasound to Detect Defects in Laser Melted Parts -- SLM Process Variables and Part Geometry Optimization Based on Numerical Prediction of Process Induced Distortions -- Optimizing, Fabricating and Characterizing Additively Manufactured Process Tubing -- Scaling Relationships for Direct Ink Writing with Acoustic Focusing -- The Influence of Gas Cooling in Context of Wire Arc Additive Manufacturing: A Novel Strategy of Affecting Grain Structure and Size -- Microstructure and Mechanical Properties of Laser Deposited Ni/WC Metal Matrix Composite Coatings -- Composite Powder Consolidation Using Selective Laser Melting: Input Energy/Porosity Morphology/Balling Effect Relation -- Part 4: Advanced Characterization Techniques for Quantifying and Modeling Deformation Mechanisms -- Strain Localization Structures in Textured Magnesium AZ31 under Reversed Loading via Multi-scale Digital Image Correlation -- Deformation and Strengthening Mechanisms in AISI 321 Austenitic Stainless Steel under both Dynamic and Quasi-static Loading Conditions -- Analysis of Dislocation Structures in Ferritic and Dual Phase Steels Regarding Continuous and Discontinuous Loading Paths -- Microstructural Characterization of Inconel 600 Tubes after Tensile Tests at Various Temperatures and Strain Rates -- Part 5: Advanced High-Strength Steels -- Influences of Thermomechanical Treatments on the Microstructure Evolution and Mechanical Properties of Nano-precipitates Strengthened Steels -- Effects of Solid Solution Treatment on the Microstructure and Mechanical Properties in the Ultra-high Strength Steel Strengthened by Nanoscale Particles -- Effects of Microstructure on the Strain Rate Sensitivity of Advanced Steels -- Part 6: Advanced Materials in Dental and Orthopedic Applications -- Characterization of Chitin Synthesized from Snail Shell -- Titanium-magnesium Composite for Dental Implants (BIACOM) -- Part 7: Alloys and Compounds for Thermoelectric and Solar Cell Applications V -- Thermoelectric Behaviour of Polyvinyl Acetate /CNT Composites -- Part 8: Applications of Solidification Fundamentals -- Microstructure Characteristics of A356 Nanocomposites Manufactured Via Ultrasonic Cavitation Processing under Controlled Solidification Conditions -- Part 9: Biological Materials Science -- Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants -- Osteoporosis and fatigue fracture prevention by analysis of bone microdamage -- Bone Remodeling under Tooth Loading -- Investigating Biochemical Constituents of Cymbopogon citratus Leaf: Prospects on Total Corrosion of Concrete Steel-rebar in Acidic-Sulphate Medium -- Two-step sintering effects on the microstructure and mechanical properties of forsterite scaffolds -- Part 10: Bulk Metallic Glasses XIV -- Material Behavior in Micro Milling of Zirconium based Bulk Metallic Glass -- Part 11: Computational Thermodynamics and Kinetics -- Comparison of the Phase-field Models to Predict the Recrystallization Kinetics -- Surface Reaction and Transport in Oxides Formed on FeCrAl Alloys in High Temperature Nitridation Environments -- Atomic Scale Modeling of Fe-Al-Mn-C Alloy using Pair Models and Monte-Carlo Calculations -- Control Technique Study of Non-metallic Inclusions in Low Carbon Steel by Rare Earth Final Deoxidization -- Effect of Cooling Rate on Phase Transformation and Microstructure Evolution in a Large Size Forged Ingot of Medium Carbon Low Alloy Steel -- Formation and Control of CaS Inclusion in Gear Steel 20MnCr5 -- Investigations on the Mechanical Deformation of Amorphous Alloy Nanowires Using Phase-field Modeling and Thermodynamics Avalanche Models -- Thermodynamic Modeling of Al-Fe-Cr Ternary System -- Part 12: Defects and Properties of Cast Metals -- AModeling and Experimental Investigation on the Formation of Acicular Silicon and Sludge in High Pressure Die Casting of a Modified A383 Alloy -- Hot-tearing of Multicomponent Al-Cu Alloys Based on Casting Load Measurements in a Constrained Permanent Mold -- Effect of Molybdenum Content, Pouring Temperature and Cooling Rate on the Casting Defects of High Chromium White Cast Iron -- Effect of Various Aluminum Content on the Formation of Inclusion -- Effect of Segregated Alloying Elements on the High Strength Steel Properties: Application to the Large Size Ingot Casting Simulation -- Thermal-Mechanical Model of Depression Formation in Steel Continuous Casting -- Study for the Initiation Locations of Longitudinal Surface Cracks on Beam Blank in the Mold of Continuous Casting -- The Influence of SEN and Upper Nozzle Design on the Flow Character for the Slab Quality -- Effect of the Addition of Ce and Si on the Hot Cracking Behavior of SiMn Alloy during the Solidification Process -- Modeling and Predication of Shrinkage Porosity Formation in Steel Ingot -- Numerical Analysis of Coupled Turbulent Flow and Macroscopic Solidification in a Billet Continuous Casting Mold with Electromagnetic Stirring -- Part 13: Environmentally Assisted Cracking: Theory and Practice -- Hydrogen embrittlement and hydrogen-enhanced strain-induced vacancies in a-iron -- Factors causing hydrogen embrittlement of cold-drawn pearlitic steel fractured under elastic/plastic region -- Corrosion of Nickel-Titanium, C110, and Al6061 in Gallium-based Liquid Metal Alloys -- Part 14: General Poster Session -- Synthesis and characterization of Al-B4C powders by mechanical alloying -- Direct Conversion of Celestite to SrCO3 by Wet Milling -- Part 15: High Temperature Electrochemistry III -- Electrochemistry in Molten LiF-BeF2 Salt for Fluoride Salt-Cooled High Temperature Reactor Applications -- Impurity Removal from Titanium Oxycarbide -- Next-Generation Molten Oxide Energy Materials R&D -- Effects of Oxide Precursor Preparation Parameters on the Electrochemical Reduction of Tantalum Pentoxide in Calcium Chloride Melt -- The Effect of Temperature on Electrochemical Codeposition of Mg-Ni Hydrogen Storage Alloys from Molten Salt System -- Part 16: Materials and Fuels for the Current and Advanced Nuclear Reactors VI -- Diffusion Studies in the Development of an FCCI Barrier for High-Burnup Metallic Nuclear Fuel -- Part 17: Materials Engineering of Soft Magnets for Power and Energy Applications -- Development of Mold Inductor for Power Conversion System -- Effect of Annealing Time on the Texture of a 2.8% Si Non-Oriented Electrical Steel after Inclined and Skew Rolling -- Multi-parameter Magnetic Material Characterization for High Power Medium Frequency Converters -- Part 18: Phase Transformations and Microstructural Evolution -- An Experimental Assessment of the a +a' Miscibility Gap in Fe-Cr -- Phase Transformation, Microstructural Evolution and Property Modification in Rapidly Solidified Grey Cast Iron -- Morphologyof Order-disorder Structures in Rapidly Solidified L12intermetallics -- Part 19: Recent Developments in Biological, Structural and Functional Thin Films and Coatings -- Development of Enamel Coatings in Accordance with Recent Regulations of Food Contact Materials -- Transmission Probability of Diffusing Particles - A Case Study -- Preparation of Porous Titanium Oxide Film by Sol-Gel Method -- Part 20:…”
Full-text access

THz Technology Applied to Cultural Heritage in Practice by Fukunaga, Kaori

Full-text access

SFPE Handbook of Fire Protection Engineering

Table of Contents: “…Introduction to Fluid Mechanics -- Conduction of Heat in Solids -- Convection Heat Transfer -- Radiation Heat Transfer -- Thermochemistry -- Chemical Equilibrium -- Thermal Decomposition of Polymeric Materials -- Structural Mechanics -- Properties of Building Materials -- Chemical Kinetics and Fire -- Diffusion Flames -- Fundamentals of Premixed Flames -- Fire Plumes, Flame Height, and Air Entrainment -- Ceiling Jet Flows -- Vent Flows -- Effect of Combustion Conditions on Species Production -- Flammability Limits of Premixed and Diffusion Flames -- Ignition of Liquids -- Smoldering Combustion -- Spontaneous Combustion and Self-Heating -- Flaming Ignition of Solid Fuels -- Electrical Fires -- Surface Flame Spread -- Smoke Characterization and Damage Potential -- Heat Fluxes from Fires to Surfaces -- Heat Release Rates -- Calorimetry -- The Cone Calorimeter -- Compartment Fire Modeling -- Estimating Temperatures in Compartment Fires -- Zone Computer Fire Models for Enclosures -- Modeling Fires Using Computational Fluid Dynamics (CFD) -- Enclosure Smoke Filling and Fire-Generated Environmental Conditions -- Methods for Predicting Temperatures in Fire Exposed Structures -- Fire Load Density -- Combustion Characteristics of Materials and Generation of Fire Products -- Performance-Based Design -- Fire Scenarios -- Engineering Considerations for Fire Protection System Selection -- Design of Detection Systems -- Hydraulics -- Automatic Sprinkler System Calculations -- Halon Design Calculations -- Clean Agent Total Flooding Fire Extinguishing Systems -- Carbon Dioxide Systems -- Water Mist Fire Suppression Systems -- Foam Agents and AFFF System Design Considerations -- Foam System Calculations- Considerations for Coordinating and Interfacing Fire Protection and Life Safety Systems -- Smoke Control -- Smoke Management by Mechanical Exhaust or Natural Venting -- Structural Fire Engineering of Building Assemblies and Frames -- Analytical Methods for Determining Fire Resistance of Steel Members -- Analytical Methods for Determining Fire Resistance of Concrete Members -- Analytical Methods for Determining Fire Resistance of Timber Members -- Egress Concepts and Design Approaches -- Selecting Scenarios for Deterministic Fire Safety Engineering Analysis - Life Safety for Occupants -- Human Behavior in Fire -- Employing the Hydraulic Model in Assessing Emergency Movement -- Computer Evacuation Models for Buildings -- Visibility and Human Behavior in Fire Smoke -- Combustion Toxicity -- Assessment of Hazards to Occupants from Smoke, Toxic Gases, and Heat -- Engineering Data -- Liquid Fuel Fires -- Fire Hazard Calculations for Large, Open Hydrocarbon Fires -- Vapor Clouds -- Effects of Thermal Radiation to People Predicting 1st and 2nd Degree Skin Burns -- Flammable Gas and Vapor Explosions -- Dust Explosions -- BLEVEs and Fireballs -- Introduction to Fire Risk Analysis -- Probability & Statistics -- Reliability, Availability, and Maintainability -- Building Fire Risk Analysis -- Uncertainty -- Decision Analysis -- Data For Engineering Analysis -- Measuring Fire Consequences in Economic Terms -- Computer Simulation for Fire Risk Analysis -- Engineering Economics -- Fire Risk Indexing -- Risk-Informed Industrial Fire Protection Engineering -- Product Fire Risk Analysis -- Health Care Application of Quantitative Fire Risk Analysis -- The Building Envelope - Fire Spread, Construction Features and Loss Examples -- Wildland fires -- Fires in Vehicle Tunnels -- Fire Risk Assessment for Nuclear Power Plants -- Fire Risk in Mass Transportation -- Appendix A: Conversion Factors -- Appendix B: Thermophysical Property Data -- Appendix C: Fuel Properties and Combustion Data -- Appendix D: Configuration Factors -- Appendix E: Piping Properties.…”
Full-text access

Solid state physics / by Grosso, Giuseppe, Pastori Parravicini, Giuseppe

Table of Contents: “…Interacting Electronic-Nuclear Systems and the Adiabatic Principle -- 8.1. …”
Full-text access

Solar energy : technologies and the project delivery process for buildings / by Walker, Andy (Howard Andy)

Table of Contents: “…Nomenclature -- Appendix B. Unit conversion factors.…”
Full-text access

Applied Physics, System Science and Computers II Proceedings of the 2nd International Conference on Applied Physics, System Science and Computers (APSAC2017), September 27-29, 2017...

Full-text access