Search Results - efficient energy use
Suggested Topics within your search.
Suggested Topics within your search.
- Computational Intelligence 75
- Computational intelligence 75
- Artificial Intelligence 56
- Artificial intelligence 56
- Telecommunication 53
- Communications Engineering, Networks 52
- Electronic Circuits and Systems 39
- Electronic circuits 39
- Materials 34
- Signal processing 30
- Signal, Speech and Image Processing 30
- Analysis 26
- Characterization and Analytical Technique 26
- Control engineering 26
- Renewable Energy 25
- Renewable energy sources 25
- Electric power production 24
- Electrical Power Engineering 24
- Electronics 22
- Electronics and Microelectronics, Instrumentation 22
- Materials Engineering 21
- Computer architecture 19
- Microprocessors 19
- Processor Architectures 19
- Energy Policy, Economics and Management 18
- Energy and state 18
- Energy policy 18
- Mechanics, Applied 17
- Computer Communication Networks 16
- Computer networks 16
-
1
-
2
Energy and Bandwidth-Efficient Wireless Transmission
Published 2017Full-text access
View in OPAC
e-Book -
3
Reliable and Energy Efficient Streaming Multiprocessor Systems
Published 2018Full-text access
View in OPAC
e-Book -
4
-
5
Energy-Efficient Smart Temperature Sensors in CMOS Technology
Published 2018Full-text access
View in OPAC
e-Book -
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
Energy Engineering Proceedings of CAETS 2015 Convocation on Pathways to Sustainability /
Published 2017Table of Contents: “…China's long road to the high-efficiency, clean, and low-carbon energy transition -- Chapter 7. …”
Full-text access
View in OPAC
e-Book -
15
-
16
Energy Technology 2018 Carbon Dioxide Management and Other Technologies /
Published 2018Table of Contents: “…Part 1. Energy Technologies and CO2 Management Symposium -- Gas Hydrate-based CO2 Separation Process: Quantitative Assessment of the Effectiveness of Various Chemical Additives Involved in the Process -- Tar Removal from Hot Coke Oven Gas for H2 Amplification with In Situ CO2 Capture -- An Evaluation Method for Material and Energy Conversion Effect with Steel Manufacturing Process Data -- Preparation and Characterization of Activated Carbon from Waste Ion-exchange Resin for CO2 Adsorption -- Evaluation of Variation in the Life Cycle Based Environmental Impacts for Copper Concentrate Production -- Direct Reduction of Copper Slag Composite Pellets within Lignite Using Biomass as Binder -- Thermodynamic Analysis of Incineration Treatment of Waste Disposable Syringes in an EAF Steel-making Process -- The Reduction Kinetic of the Combined Cu-based Oxygen Carrier Used for Chemical Looping Gasification Technology -- Synergistic Effect Between Fat Coal and Poplar During Co-pyrolysis with Thermal Behavior and ATR-FTIR Analysis -- Flow Characteristic of Two-phase Bubble Reactor for Slag Waste Heat Recovery -- Improving Energy Efficiency in Direct Method for Continuous Casting of Lead Sheets -- Research on High Efficiency Energy Conversion Technology for Modern Hot Blast Stove -- An Exergy Study of Cowper Stove Operations with an Iron Blast Furnace -- Waste Heat Recovery from Aluminum Production -- Leaching and Carbonation of Electric Arc Furnace(EAF) Slag under a Microwave Field for Mineral Carbonation -- A Novel Preparation of Bi2O3 and Their Potent Photocatalytic Activity under Visible-light Irradiation -- Energy Conservation in Sintering Ignition Process Based on Comprehensive Ignition Intensity -- Part 2. …”
Full-text access
View in OPAC
e-Book -
17
-
18
Energy Technology 2019 Carbon Dioxide Management and Other Technologies /
Published 2019Table of Contents: “…Part 1. Energy Technologies and CO2 Management Symposium -- Gas Hydrate-based CO2 Separation Process: Quantitative Assessment of the Effectiveness of Various Chemical Additives Involved in the Process -- Tar Removal from Hot Coke Oven Gas for H2 Amplification with In Situ CO2 Capture -- An Evaluation Method for Material and Energy Conversion Effect with Steel Manufacturing Process Data -- Preparation and Characterization of Activated Carbon from Waste Ion-exchange Resin for CO2 Adsorption -- Evaluation of Variation in the Life Cycle Based Environmental Impacts for Copper Concentrate Production -- Direct Reduction of Copper Slag Composite Pellets within Lignite Using Biomass as Binder -- Thermodynamic Analysis of Incineration Treatment of Waste Disposable Syringes in an EAF Steel-making Process -- The Reduction Kinetic of the Combined Cu-based Oxygen Carrier Used for Chemical Looping Gasification Technology -- Synergistic Effect Between Fat Coal and Poplar During Co-pyrolysis with Thermal Behavior and ATR-FTIR Analysis -- Flow Characteristic of Two-phase Bubble Reactor for Slag Waste Heat Recovery -- Improving Energy Efficiency in Direct Method for Continuous Casting of Lead Sheets -- Research on High Efficiency Energy Conversion Technology for Modern Hot Blast Stove -- An Exergy Study of Cowper Stove Operations with an Iron Blast Furnace -- Waste Heat Recovery from Aluminum Production -- Leaching and Carbonation of Electric Arc Furnace(EAF) Slag under a Microwave Field for Mineral Carbonation -- A Novel Preparation of Bi2O3 and Their Potent Photocatalytic Activity under Visible-light Irradiation -- Energy Conservation in Sintering Ignition Process Based on Comprehensive Ignition Intensity -- Part 2. …”
Full-text access
View in OPAC
e-Book -
19
Energy Materials 2017
Published 2017Table of Contents: “…Part 1: Energy and Environmental Issues in Materials Manufacturing and Processing: Opportunities in the Steel Industry -- Waste Energy Recovery Technology of Iron and Steel Industry in China -- Green Manufacturing Process of Shougang Jingtang Steel Plant -- The Introduction and Process Optimization Research of Oxygen Blast Furnace Ironmaking Technology -- Prediction and optimal scheduling of byproduct gases in steel mill: Trends and challenges -- Processing Non-Oriented Electrical Steels Using Inclined/Skew Rolling Schemes -- A Possible Way for Efficient Utilization of Coal Energy: The Combined Process of Ironmaking with Gasoline Synthesis and Electricity Generation -- The influence of water vapour on the fuming rate in a ferromanganese system -- Part 2: Energy and Environmental Issues in Materials Manufacturing and Processing: Opportunities in Aluminum Production, Waste Heat and Water Recovery -- Approach for pyrolysis gas release modelling and its potential for enhanced energy efficiency of aluminium remelting furnaces -- Numerical approach for the implementation of the interaction of pyrolysis gases and combustion products in an aluminium melting furnace -- Fluoropolymer Coated Condensing Heat Exchangers for Low-grade Waste Heat Recovery -- Nitrate and other anion removal from waste water using the Hydroflex technology -- Mechanical Analysis of Raceway Formation in Bulk Bed of Blast Furnace -- Part 3: Materials for Coal-Based Power: Materials For Coal-Based Power: Session I -- Ni-Fe based alloy GH984G used for 700 coal-fired power plant -- Part 4: Materials for Coal-Based Power: Materials For Coal-Based Power: Session II -- Creep strength and oxidation resistance of industrially made G115 Steel pipe -- Accelerated creep test for new steels and welds -- Part 5: Materials for Coal-Based Power: Materials For Coal-Based Power: Session IV -- The Reliability Analysis of 12Cr1MoVG and T23 Used for USC Boilers Water Wall -- Part 6: Materials for Coal-Based Power: Poster Session -- Effect of high-frequency induction hardening on stress corrosion of a 12% Cr martensitic stainless steel -- Fireside corrosion behaviors of Inconel 740 H superalloy in various SO2 contents -- High Cycle Fatigue Behavior of HAYNES282 Superalloy -- Recent Development in the Characteristics of Alloy 625 for A-USC Steam Turbine Castings -- Part 7: Materials for Gas Turbines: Coatings -- EVOLUTION OF THE THERMAL CONDUCTIVITY OF Sm2Zr2O7 UNDER CMAS ATTACK -- Part 8: Materials for Gas Turbines: Hot Corrosion and New Materials -- Development of a new high strength and hot corrosion resistant directionally solidified superalloy DZ409 -- Part 9: Materials for Gas Turbines: Microstructure and Processing -- Modeling the Diffusion of Minor Elements in Different MCrAlY - Superalloy Substrates at High Temperature -- ON HEALING MECHANISM OF CAST POROSITIES IN CAST NI-BASED SUPERALLOY BY HOT ISOSTATIC PRESSING -- The Influence of Dendritic Segregation Degree to the Recrystallization Nucleation in U4720LI -- Part 10: Materials for Gas Turbines: Poster Session -- Stress Rupture Properties of Alloy 783 -- Study on the Undercoolability and Single Crystal Castability of Nickel-Based Superalloys -- Part 11: Materials for Nuclear Energy: Materials for Nuclear Applications I -- Enhancing the High-Cycle Fatigue Property of 316 Austenitic Stainless Steels through Introduction of Mechanical Twins by Cold-Drawing -- Part 12: Materials for Nuclear Energy: Materials for Nuclear Applications II -- Microstructure Evolution of a Reactor Pressure Vessel Steel during High-temperature Tempering -- Part 13: Materials for Nuclear Energy: Environmental Effects -- Effect of Steam Pressure on the Oxidation Behaviour of Alloy 625 -- Friction Stir Processing of Degraded Austenitic Stainless Steel Nuclear Fuel Dry Cask Storage System Canisters -- Part 14: Materials for Nuclear Energy: Accident Tolerant Fuels & Irradiation Effects -- The Mechanical Response of Advanced Claddings during Proposed Reactivity Initiated Accident Conditions -- First principles investigations of alternative nuclear fuels -- Comparative study of thermal conductivity of SiC and BeO from ab initio calculations -- Part 15: Materials for Oil and Gas and AMREE Oil & Gas III -- Anisotropic behaviors for X100 high grade pipeline steel under stress constraints -- Co-relation of microstructural features with tensile and toughness characteristics of X70 grade steel -- Development and applications of new generation Ni-containing cryogenic steels in China -- Microstructure analysis and weldability investigation of stainless steel clad plate -- Microstructure and Properties of High Performance Pipeline Steels -- Sensitivity variation of nanomaterials at different operating temperature conditions.…”
Full-text access
View in OPAC
e-Book -
20