Arama Sonuçları - materials preparation and failure.

Guidelines for Failure Investigation. Yazar: Investigations, Committee on Forensic

İçindekiler: “…4.3 Qualifications of the testing personnel -- 4.4 Calibration of the testing equipment -- 4.5 Destructive versus nondestructive testing -- 4.6 Field versus laboratory testing -- 4.6.1 Field Testing -- 4.6.2 Laboratory Testing -- 4.6.3 Mock-ups -- 4.7 Sample collection -- 4.7.1 Determining Sample Size and Distribution -- 4.7.2 Methods of Sample Selection -- 4.7.3 Budgetary Considerations -- 4.7.4 Methods of Sampling by Material Type for Conducting Laboratory Tests -- 4.7.5 Example of a Generic Sample Collection Protocol -- 4.8 Reporting the results for use in the investigation -- Chapter 5: Data Analysis and Interpretation -- 5.1 Introduction -- 5.2 Data Analysis -- 5.3 Development of Failure Hypotheses -- 5.3.1 Keeping an Open Mind -- 5.4 Failure Profile and Classification of Failures -- 5.4.1 Time Phase of Failure -- 5.4.2 Types of Failures -- 5.4.3 Causes of Failures -- 5.5 Testing Hypotheses -- 5.5.1 Computer Modeling and Analysis -- 5.5.2 Material and Assembly Testing -- 5.5.3 Cognitive Testing -- 5.6 Developing Conclusions -- Chapter 6: Forensic Engineering Reports -- 6.1 Introduction -- 6.2 Purpose and Use of the Report -- 6.2.1 The Report as Part of the Dispute Resolution Process -- 6.2.2 Purpose of the Report -- 6.2.3 Use of the Report -- 6.3 Report Content and Organization -- 6.3.1 Report Content -- 6.3.2 Report Organization -- 6.4 Strategies for Preparing Effective Expert Reports -- 6.4.1 Wait for Authorization to Begin Writing -- 6.4.2 Stay Within Your Assigned Scope -- 6.4.3 Stay Within Your Area of Expertise -- 6.4.4 Identify the Questions Your Opinions Should Address -- 6.4.5 Strive for Focus, Accuracy and Simplicity -- 6.4.6 Document the Basis of All Statements -- 6.4.7 Anticipate and Address Opponent's Challenges -- 6.4.8 Address Assertions in Opponent's Claims and Reports -- 6.4.9 Avoid Absolute Words -- 6.4.10 Avoid Hyperbole.…”
Full-text access
OPAC'ta görüntüle

Concise encyclopedia of advanced ceramic materials /

İçindekiler: “…Nuclear Waste Storage MaterialsChapter O; Oxide Nuclear Fuels; Oxides; Chapter P; Packing of Powders; Perovskites; Piezoelectric Materials; Point Defects; Powder Characterization; Powder Mechanics; Powders: Chemical Preparation; Powders: Granulation; Powders: Hydrothermal Preparation; Powders: Prefiring; Pressure Filtration; PTC Sensor Materials; Chapter R; Reaction Sintering; Refractory Carbides; Refractory Materials, Metallurgical; Refractory Materials, Specialty; Chapter S; Sawing and Grinding of Brittle Materials; Seeding of Transformations; Sialons; Silica; Silicates; Suicides.…”
Full-text access
OPAC'ta görüntüle

Extraction 2018 Proceedings of the First Global Conference on Extractive Metallurgy /

Full-text access
OPAC'ta görüntüle

TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings

İçindekiler: “…Biodegradable Materials for Medical Applications -- Comparative Study on Corrosion Behavior WE33 in Immersion and Polarization Influenced by Heat Treatment -- Metal Injection Molding (MIM) of Mg-alloys for Biomedical Applications -- Microstructure and Mechanical Properties of Mg-Gd Alloys as Biodegradable Implant Materials -- Study on Polylactide-coconut Fibre for Biomedical Applications -- Visualisation of Implant Failure by Synchrotron Tomography -- Part 10. …”
Full-text access
OPAC'ta görüntüle

TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings

İçindekiler: “…Biodegradable Materials for Medical Applications -- Comparative Study on Corrosion Behavior WE33 in Immersion and Polarization Influenced by Heat Treatment -- Metal Injection Molding (MIM) of Mg-alloys for Biomedical Applications -- Microstructure and Mechanical Properties of Mg-Gd Alloys as Biodegradable Implant Materials -- Study on Polylactide-coconut Fibre for Biomedical Applications -- Visualisation of Implant Failure by Synchrotron Tomography -- Part 10. …”
Full-text access
OPAC'ta görüntüle

Light Metals 2019

İçindekiler: “…Aluminum Alloys, Processing and Characterization -- Grain Boundary Precipitation and Fracture Behavior of Al-Cu-Li Alloys -- Comparison of Texture and Surface Finish Evolution during Single Point Incremental Forming and Formability Testing of AA 7075 -- Understanding the Co-precipitation Mechanisms of Al3(Sc, Zr) with Strengthening Phases in Extruded Al-Cu-Li Model Alloys -- Determining a Retrogression Heat Treatment to Apply during Warm Forming of a High Strength AA7075 Sheet Material -- Development of High-strength and High-electrical-conductivity Aluminum Alloys for Power Transmission Conductors -- The Combined Effects of Sr Additions and Heat Treatment on the Microstructure and Mechanical Properties of High Pressure Die Cast A383 Alloy -- Influence of Additional Elements (Si Ti and B) on the Castability, Corrosion and Mechanical Properties of A201 Alloys -- Effect of Ni Addition on the Solidification Process and Microstructure of Al-12%Si-4%Cu-1.2%Mn-x%Ni Heat-resistant Alloys -- Phase Formation of Monotectic Al-In and Al-Ga-In Alloys and Implications Thereof -- Investigations on Pb-free 6000 Series Aluminum Alloy for Machining Applications -- Optimization in Novel Partial-solid High Pressure Aluminum Die Casting by Taguchi Method -- Application of the Hot Stamping Process to Aluminum Alloy Structural Components -- Failure of 5000 and 6000 Series Aluminum Alloys in Modular Wastewater Treatment Aeration Tanks -- Grain Refinement of Al-Si-Mg Cast Alloys by Al3Ti3B Master Alloy -- Improving Bendability of Al-Mg-Si Alloy Sheet by Minor Alloying Element Addition -- Deep Drawing and Anodizing Quality Improvement in AA3003-O Alloy by Optimization of Homogenization, Rolling and Annealing -- Understanding Large-strain Softening of Aluminum in Shear at Elevated Temperature -- Assessments of Sc-containing Ternary Systems Al-Sc-Ti and Al-Sc-Zr within the Thermodynamic Database for Aluminium Alloys, TCAL5 -- Multiscale Model for Al-Li Material Processing Simulation under Forging Conditions -- Investigation of Effect of Aging Treatment on Deformation Behavior of Al-Mg-Si Alloy Using Quasi-2D Polycrystalline Sample -- Development of Innovative Aluminum Alloys with High Mechanical Properties -- A General Formulation of Eutectic Silicon Morphology and Processing History -- Evaluation of Hot Tearing Susceptibility of 6000 Series Aluminum Alloys Using Constrained Solidification Test -- In-situ Fitness-for-Service Assessment of Aluminum Alloys Developed for Automotive Powertrain Lightweighting -- Research on the Effect of the Processing Parameters on Susceptibility of Liquation Cracking of Al Alloys during Refilled Friction Stir Spot Welding -- Factors Influencing the Cast Duration of Horizontal Continuous Ingot Casters -- On Si Redistribution during Friction Stir Processing of Cast Al-7%Si-0.4%Mg Alloys -- Equal Channel Angular Pressing of a Newly Developed Precipitation Hardenable Scandium Containing Aluminum Alloy -- Stiffness Improvement Through Alloying Elements in Al Alloys -- Formation Mechanism of Surface Segregation in Heated Mold Continuous Casting Al-Cu Alloy -- Effects of Extrusion and Heat Treatment Conditions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu-Er Alloy -- Effects of Rare Earth Er Additions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy -- Part 3. …”
Full-text access
OPAC'ta görüntüle

Light Metals 2018

İçindekiler: “…Aluminum Alloys, Processing and Characterization -- Grain Boundary Precipitation and Fracture Behavior of Al-Cu-Li Alloys -- Comparison of Texture and Surface Finish Evolution during Single Point Incremental Forming and Formability Testing of AA 7075 -- Understanding the Co-precipitation Mechanisms of Al3(Sc, Zr) with Strengthening Phases in Extruded Al-Cu-Li Model Alloys -- Determining a Retrogression Heat Treatment to Apply during Warm Forming of a High Strength AA7075 Sheet Material -- Development of High-strength and High-electrical-conductivity Aluminum Alloys for Power Transmission Conductors -- The Combined Effects of Sr Additions and Heat Treatment on the Microstructure and Mechanical Properties of High Pressure Die Cast A383 Alloy -- Influence of Additional Elements (Si Ti and B) on the Castability, Corrosion and Mechanical Properties of A201 Alloys -- Effect of Ni Addition on the Solidification Process and Microstructure of Al-12%Si-4%Cu-1.2%Mn-x%Ni Heat-resistant Alloys -- Phase Formation of Monotectic Al-In and Al-Ga-In Alloys and Implications Thereof -- Investigations on Pb-free 6000 Series Aluminum Alloy for Machining Applications -- Optimization in Novel Partial-solid High Pressure Aluminum Die Casting by Taguchi Method -- Application of the Hot Stamping Process to Aluminum Alloy Structural Components -- Failure of 5000 and 6000 Series Aluminum Alloys in Modular Wastewater Treatment Aeration Tanks -- Grain Refinement of Al-Si-Mg Cast Alloys by Al3Ti3B Master Alloy -- Improving Bendability of Al-Mg-Si Alloy Sheet by Minor Alloying Element Addition -- Deep Drawing and Anodizing Quality Improvement in AA3003-O Alloy by Optimization of Homogenization, Rolling and Annealing -- Understanding Large-strain Softening of Aluminum in Shear at Elevated Temperature -- Assessments of Sc-containing Ternary Systems Al-Sc-Ti and Al-Sc-Zr within the Thermodynamic Database for Aluminium Alloys, TCAL5 -- Multiscale Model for Al-Li Material Processing Simulation under Forging Conditions -- Investigation of Effect of Aging Treatment on Deformation Behavior of Al-Mg-Si Alloy Using Quasi-2D Polycrystalline Sample -- Development of Innovative Aluminum Alloys with High Mechanical Properties -- A General Formulation of Eutectic Silicon Morphology and Processing History -- Evaluation of Hot Tearing Susceptibility of 6000 Series Aluminum Alloys Using Constrained Solidification Test -- In-situ Fitness-for-Service Assessment of Aluminum Alloys Developed for Automotive Powertrain Lightweighting -- Research on the Effect of the Processing Parameters on Susceptibility of Liquation Cracking of Al Alloys during Refilled Friction Stir Spot Welding -- Factors Influencing the Cast Duration of Horizontal Continuous Ingot Casters -- On Si Redistribution during Friction Stir Processing of Cast Al-7%Si-0.4%Mg Alloys -- Equal Channel Angular Pressing of a Newly Developed Precipitation Hardenable Scandium Containing Aluminum Alloy -- Stiffness Improvement Through Alloying Elements in Al Alloys -- Formation Mechanism of Surface Segregation in Heated Mold Continuous Casting Al-Cu Alloy -- Effects of Extrusion and Heat Treatment Conditions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu-Er Alloy -- Effects of Rare Earth Er Additions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy -- Part 3. …”
Full-text access
OPAC'ta görüntüle

Proceedings of the 3rd Pan American Materials Congress

İçindekiler: “…Part 1: Pan American Materials Congress: Advanced Biomaterials -- Analysis of Biomimetic Surgical Clip Using Finite Element Modeling for Geometry Improvement and Biomaterials Selection -- Chemical composition effect of sol-gel derived bioactive glass over bioactivity behavior -- Effects of Dialium guineense based zinc nanoparticle material on the inhibition of microbes inducing microbiologically influenced corrosion -- Injectability evaluation of bone-graft substitutes based on carrageenan and hydroxyapatite nanorods -- Synthesis and characterization of Ni0.5Zn0.5Fe2O4@mSiO2 core shell nanocarrier for drug delivery applications -- Part 2: Pan American Materials Congress: Advanced Manufacturing -- Carbon Based Coatings Deposited On Nitrided Stainless Steel: Study Of Thermal Degradation -- Comparative Mechanical Analysis Between Epoxy Composite Reinforced With Random Short Cuarua Fibers And Aligned Long Curaua Fibers -- Effect of Tool Rotation on Tool Wear Phenomenon in Rotary Tool micro-USM -- Numerical Modeling of High-Velocity Impact Welding -- Selective Laser Sintering of Polyamide/Hydroxyapatite Scaffolds -- Part 3: Pan American Materials Congress: Materials for Green Energy -- A comparison between recycled spent zeolite and calcite limestone for manganese removal -- Effect of Mo6+ Substitution on Microstructure and Lithium Ionic Conductivity of Garnet-Type Li7La3Zr2O12 Solid Electrolytes by Field Assisted Sintering Technology -- Electromagnetic Levitation Refining Of Silicon-iron Alloys for Generation of Solar Grade Silicon -- Green Extract of Mate Tea as Corrosion Inhibitor of Copper and Aluminum -- Platinum Salts Synthesis as Precursors to Get Heterogeneous Catalysts for Biofuels Production -- Technical and Environmental Assessment of an Alternative Binder for Low Traffic Roads with LCA Methodology -- Part 4: Pan American Materials Congress: Materials for Infrastructure -- Anticorrosion and Adsorption Mechanism of Rhizophora mangle L Leaf-extract on Steel-reinforcement in 3.5% NaCl-immersed Concrete -- Cassia fistula leaf-extract Effect on Corrosion-inhibition of Stainless-steel in 0.5 M HCl -- Effect of C5H11NO2S on Reinforcing-steel Corrosion in Concrete Immersed in Industrial/Microbial Simulating-environment -- FIBER REINFORCED CONCRETE MANUFACTURED WITH ELECTRIC ARC FURNACE SLAG -- Jigs, hydro-cyclones and sensor-based sorting to value recycled aggregates -- Performance of hydraulic mixes manufactured with electric arc furnace slag aggregates -- POROUS ASPHALT MIXTURES WITH 100% SIDERURGIC AGGREGATES -- Part 5: Pan American Materials Congress: Materials for Oil and Gas Industry -- Blends of PVDF with its processing waste: Study of the mechanical properties of the blends thermally aged -- DYNAMIC TRANSFORMATION AND RETRANSFORMATION DURING THE SIMULATED PLATE ROLLING OF AN X70 PIPELINE STEEL -- Effect of Heat Input on the microstructure and toughness of welded API pipelines -- EVALUATION OF NON-DESTRUCTIVE TECHNIQUES (THERMOGRAPHY, ULTRASOUND AND EDDY CURRENT) FOR DETECTION OF FAILURES IN METALLIC SUBSTRATES WITH COMPOSITE ANTICORROSIVE COATINGS -- Structural Integrity of Pipelines -- Part 6: Pan American Materials Congress: Materials for Transportation and Lightweighting -- ADVANTAGES OF HOT COMPRESSION IN THE MANUFACTURE OF AlB4C COMPOSITES -- An Improved Silicon Carbide Monofilament for the Reinforcement of Metal Matrix Composites -- Analysis of coir fiber porosity -- BALLISTIC PERFORMANCE IN MULTILAYER ARMOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS -- Curaua non-woven fabric composite for ceramic multilayered armors: A lightweight, natural, and low cost alternative for KevlarTM -- Effect of Forging on Microstructure, Texture and Compression Behaviour of Extruded AZ31B -- EFFECTS OF HYPOEUTECTIC Sc ADDITIONS TO Al-4.5 wt% Cu UNDER DIFFERENT COOLING RATES -- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH FIQUE FABRIC -- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH JUTE FABRIC -- Microstructure and Hardness of Subzero Quenched and Heat Treated Ti-6Al-4V Alloy -- Nano-Additive Reinforcement of Thermoplastic Microballoon Epoxy Syntactic Foams -- Nanocomposites Mechanical and Tribological Properties using Graphene Coated Ceramic Nanoparticles for Light Weight Applications -- Synthesis of Energetic Composites in Ti-Al-B-C System by Adiabatic Explosive Compaction -- Tensile and impact properties of two fiber configurations for curaua reinforced composites -- Thermo\\8722;Mechanical behavior of nanostructure polyacrylic polymer based on Al2 O3 and bentonite nanoparticles -- Thermo\\8722;mechanical properties of waterborne acrylate hybrid nanocomposites -- Thermo-mechanical properties of copolymer/clay nanocomposites: A comparative study of production method by in-situ and solution mixture -- Part 7: Pan American Materials Congress: Minerals Extraction and Processing -- Biotechnological recycling of precious metals sourced from post-consumer products -- Biotechnologies for water recycling in the mineral industry -- Dissolution thermodynamics of smithsonite in alkaline iminodiacetate aqueous solution -- Effect of ethylenediamine on smithsonite flotation -- Extraction of Gold from sands and Slimes Tailings Dump from Mazowe Mine, Zimbabwe -- Gold Recovery from Waste Solutions of PCB Gold Plating Process using Hydro Cyclone Reactor for Demonstration Study -- Improving Quality of Coke Made from Chinese Xinjiang Gas Coal with High Strength Modifier -- INVESTIGATING THE DISSOLUTION CHARACTERISTICS OF STRONTIUM SULFIDE -- Kinetic study on the leaching of vanadium-bearing converter slag with dilute sulfuric acid -- Leaching of Spent Ni-Mo Hydrodesulphurization (HDS) Catalyst in Oxalic Acid Solutions -- Novel Adsorbent from Iron Ore Concentration Tailings for Toxic Cationic Dye Removal from Water -- Preliminary analysis of the application of sensor based sorting on a limestone mine in the region Caçapava do Sul, Brazil -- Preparation of high grade Industrial Copper Compound from a Nigerian Malachite mineral by Hydrometallurgical process -- PROCESS OF IMPROVING THE FLOTATION USING ULTRASONIC BOMBARDMENT -- Production of strontianite from celestite ore in carbonate media -- Reduction Kinetics and Characterization Study of Synthetic Magnetite Micro Fines -- Study on Leaching Valuable Elements from Bayan Obo Tailings -- Study on thermal decomposition and oxidation characteristics of iron ores -- The direct leaching of micro-disseminated gold concentrate by bromide process and the characterization of leaching products -- Working Experience with the new WOX Plant to treat zinc waelzoxide at ZGH Boleslaw SA, Poland -- Part 8: Pan American Materials Congress: Nanocrystalline and Ultra-fine Grain Materials and Bulk Metallic Glasses -- Continuous dynamic recovery in pure aluminum deformed to high strain by accumulative press bonding -- Effects of Natural Aging and Post-processed Heat Treatment on the Microstructure and Mechanical Properties of Friction Stir Processed Al-7B04 -- Evaluation of the hardening and softening effects in Zn-21Al-2Cu with as cast and homogenized microstructure processed by equal channel angular pressing -- Part 9: Pan American Materials Congress: Steels -- Effect of titanium sulfide precipitates on grain size in low carbon steel -- Evolution of Austenite Dislocation Density during Hot Deformation using a Physical Dynamic Recrystallization Model -- Influence of a Rapid Heating on the Microstructure and Properties of Press-Hardening Steel Sheets -- Jansto:New Generation Niobium Bearing Structural Steels for Future Infrastructure Demands -- Kinetic study of the austenite decomposition during continuous cooling in a welding steel -- Microstructural Evolution in Microalloyed Steels during Thermomechanical Rod Rolling -- MODELING OF METAL-SLAG MASS AND MOMENTUM EXCHANGES IN GAS-STIRRED LADLES -- Study on adjustment and optimization of LF refining slag of spring steel 55SiCrA -- Tempering Response of Bainitic and Martensitic Microstructures -- The research on the relationship between gas movement behaviors and circulating flow of the molten steel in RH.…”
Full-text access
OPAC'ta görüntüle

The Structural Integrity of Carbon Fiber Composites Fifty Years of Progress and Achievement of the Science, Development, and Applications /

İçindekiler: “…-- 18 Slow cracking in composite materials catastrophic fracture of composite structures -- 19 Finite fracture mechanics a useful tool to analyze cracking mechanisms in composite materials -- 20 Traction-separation relations in delamination of layered carbon-epoxy composites under monotonic loads Experiments and Modeling -- 21 Damage and failure analysis of bolted joints in composite laminates -- 22 City Cars made from Composites -- Part VI -- 23 A virtual testing approach for laminated composites based on micromechanics -- 24 Virtual testing of composite structures Progress and challenges in predicting damage, residual strength and crashworthiness -- 25 Contribution of virtual simulation to industrialisation of carbon fiber reinforced polymer composites for manufacturing processes and mechanical performance -- Part VII -- 26 Multi scale progressive failure modeling from Nano-structured carbon fibers to textile composites -- 27 Textile Structural Composites - from 3-D to 1-D fiber architecture -- 28 Experimental and Multiscale Numerical Studies of Woven Fabric Carbon Composite Cylinder Subjected to Internal Pressure Loading -- Part VIII -- 29 Fatigue of 2D and 3D carbon-fiber-reinforced polymer matrix composites and of a unitized polymer/ceramic matrix composite at elevated temperature -- 30 Carbon Fibers in Tribo-Composites.…”
Full-text access
OPAC'ta görüntüle

Proceedings of the IV Advanced Ceramics and Applications Conference

İçindekiler: “…1.Flash sintering of ceramics: a short review -- 2.Ceramic Matrix Composites for High Performance Friction Applications -- 3.Functional Particulated Ionic Liquid-Based Silica Microcapsules -- 4.Reducing Losses in Magnetic Thin Films Through Nanoscale Surface Patterning -- 5.Contemporary Political and Religious Extremists as Destroyers of Ancient Artistic Heritage -- 6.Pumps to save life in cardiac failure -- 7.Application of Ceramic Nanoparticles for Near Infrared Bioimaging -- 8.Contemporary aspects of joint arthroplasties and role of ceramics -- 9.Contemporary dental ceramics -- 10.Intelligent Nanomaterials For Medicine Diagnostic And Therapy Application -- 11.Environmental impact of tributyl-tin biocides on coastal marine systems in the NE Adriatic sea -- 12.Microwave electro ceramic based on magnesium titanates compounds -- 13.Structural, electrical conduction and dielectric studies of mechano-synthesized manganese nanoferrite -- 14.Towards Electronic Materials Fractal Theory -- 15.Study of Nanodimensional Spinel ni0.5zn0.5fe2o4 Ferrite Prepared by Mechanochemical Synthesis -- 16.Off-resonant Raman spectroscopy of ZnS quantum dots -- 17.Influence of preparation method on SOP modes in ZnO doped with CoO nanoparticles -- 18.Structural Properties of Cu - Se - CuSe2 Thin Films -- 19.Mobile platform usage in creating conservation and restoration documentation -- 20.Jewelry as Specific form of Spiritual and Material Culture.…”
Full-text access
OPAC'ta görüntüle

3D Microelectronic Packaging From Fundamentals to Applications /

İçindekiler: “….-3D packaging architecture and assembly process design.-Materials and Processing of TSV.-Microstructural and Reliability Issues of TSV -- Fundamentals and failures in Die preparation for 3D packaging.…”
Full-text access
OPAC'ta görüntüle

Biobased and environmental benign coatings /

Full-text access
OPAC'ta görüntüle

Seismic Evaluation and Design of Petrochemical and Other Industrial Facilities. Yazar: Facilities, Task Committee on Seismic Evaluation and Design of Petrochemical

İçindekiler: “…Intro -- Contents -- Chapter 1: Introduction -- 1.1 Objective -- 1.2 Related Industry Codes, Standards, and Specifications -- 1.3 Organization of the Book -- References -- Chapter 2: Design and Evaluation Philosophy -- 2.1 Introduction -- 2.2 Considerations for New Design -- 2.3 Considerations for the Evaluation of Existing Facilities -- 2.4 Cautions Regarding Design and Evaluation -- 2.5 Performance Objectives and Risk Categories -- 2.5.1 Performance Objectives -- 2.5.2 Risk Categories -- 2.5.3 Relationships between Performance Objectives and Risk Categories -- 2.5.4 Basis for the Recommended Performance Objectives -- 2.6 Design Approach for New Facilities -- 2.7 Evaluation of Existing Structure/Replacement in Kind -- 2.8 Considerations for Regulatory Requirements -- 2.9 Considerations for Temporary Facilities -- 2.10 Structural Observation and Inspection -- 2.11 Quality Assurance -- 2.12 Peer Review -- References -- Chapter 3: Seismic Hazards -- 3.1 Introduction -- 3.2 Earthquake Basics -- 3.2.1 Earthquake Mechanism -- 3.2.2 Earthquake Magnitude and Intensity -- 3.3 Ground Shaking -- 3.3.1 Measures of Ground Shaking for Use in Design and Evaluation -- 3.3.2 Factors Affecting Ground Shaking -- 3.4 Design Ground Motions -- 3.4.1 Design Response Spectrum-Standard Code Approach -- 3.4.2 Site-Specific Design Response Spectrum -- 3.4.3 Earthquake Time Histories -- 3.5 Ground Failure -- 3.5.1 Surface Fault Rupture -- 3.5.2 Liquefaction -- 3.6 Tsunami And Seiche -- References -- Appendix 3.A Ground Shaking -- Appendix 3.B Earthquake-Related Coastal Inundation -- Chapter 4: Seismic Analysis -- 4.1 Introduction -- 4.2 Structural Systems in a Petrochemical Facility -- 4.2.1 General -- 4.2.2 Building Structures -- 4.2.3 Nonbuilding Structures -- 4.2.4 Nonstructural Components and Systems -- 4.3 Selection of Analysis Procedures -- 4.3.1 General.…”
Full-text access
OPAC'ta görüntüle