Search Results - "6to4"

Discontinuously Reinforced Titanium Matrix Composites Microstructure Design and Property Optimization / by Huang, Lujun, Geng, Lin

Table of Contents: “…Introduction -- Design and fabrication of network structured pure Ti matrix composites -- Microstructure characteristics of Ti6Al4V matrix composites with network microstructure -- Mechanical behaviours of network structured TiBw/Ti64 composites -- Hot deformation behaviours of TiBw/Ti6Al4V composites with network microstructure -- Effects of heat treatment on microstructure and properties of TiBw/Ti6Al4V composites -- TiCp/Ti6Al4V and (TiCp+TiBw)/Ti6Al4V composites with network architecture -- Microstructure and properties of TiBw reinforced near-α Ti60 composites.…”
Full-text access

High performance polymers and their nanocomposites /

Table of Contents: “…<P>Preface xv</p> <p><b>1 High-Performance Polymer Nanocomposites and Their Applications: State of Art and New Challenges 1<br /></b><i>PM Visakh</i></p> <p>1.1 Liquid Crystal Polymers 1</p> <p>1.2 Polyamide 4, 6, (PA4,6) 3</p> <p>1.3 Polyacrylamide 4</p> <p>1.4 Effect of Nanostructured Polyhedral Oligomeric Silsesquioxone on High Performance Poly(urethane-Imide) 5</p> <p>1.5 Thermoplastic Polyimide 5</p> <p>1.6 Performance Properties and Applications of Polytetrafluoroethylene (PTFE) 7</p> <p>1.7 Advances in High-Performance Polymers Bearing Phthalazinone Moieties 9</p> <p>1.8 Poly(ethylene Terephthalate)-PET and Poly(ethylene Naphthalate)-PEN 11</p> <p>1.9 High-Performance Oil Resistant Blends of Ethylene Propylene Diene Monomer (EPDM) and Epoxydized Natural Rubber (ENR) 14</p> <p>1.10 High Performance Unsaturated Polyester/f-MWCNTs Nanocomposites Induced by F- Graphene Nanoplatelets 15</p> <p><b>2 Liquid Crystal Polymers 27<br /></b><i>Andreea Irina Barzic, Raluca Marinica Albu and Luminita Ioana Buruiana </i></p> <p>2.1 Introduction and History 27</p> <p>2.2 Polymerization 29</p> <p>2.2.1 Synthesis of Lyotropic LC Polymers 30</p> <p>2.2.2 Synthesis of Thermotropic LC Polymers 31</p> <p>2.3 Properties 32</p> <p>2.3.1 Rheology 32</p> <p>2.3.2 Dielectric Behavior 35</p> <p>2.3.3 Magnetic Properties 36</p> <p>2.3.4 Mechanical Properties 36</p> <p>2.3.5 Phases and Morphology 39</p> <p>2.4 Processing 41</p> <p>2.4.1 Injection Molding 41</p> <p>2.4.2 Extrusion 42</p> <p>2.4.3 Free Surface Flow 43</p> <p>2.4.4 LC Polymer Fiber Spinning 44</p> <p>2.5 Blends Based on Liquid Crystal Ppolymers 44</p> <p>2.6 Composites of Liquid Crystal Polymers 46</p> <p>2.7 Applications 49</p> <p>2.7.1 LC Polymers as Optoelectronic Materials 49</p> <p>2.7.2 Liquid Crystalline Polymers in Displays 50</p> <p>2.7.3 Sensors and Actuators 51</p> <p>2.8 Environmental Impact and Recycling 52</p> <p>2.9 Concluding Remarks and Future Trends 54</p> <p>Acknowledgment 54</p> <p><b>3 Polyamide 4,6, (PA4,6) 59<br /></b><i>Emel Kuram and Zeynep Munteha Sahin</i></p> <p>3.1 Introduction and History 59</p> <p>3.2 Polymerization and Fabrication 60</p> <p>3.3 Properties 69</p> <p>3.4 Chemical Stability 72</p> <p>3.5 Compounding and Special Additives 72</p> <p>3.6 Processing 73</p> <p>3.7 Applications 83</p> <p>3.8 Blends of Polyamide 4,6, (PA4,6) 84</p> <p>3.9 Composites of Polyamide 4,6, (PA4,6) 89</p> <p>3.10 Nanocomposites of Polyamide 4,6, (PA4,6) 90</p> <p>3.11 Environmental Impact and Recycling 94</p> <p>3.12 Conclusions 98</p> <p><b>4 Polyacrylamide (PAM) 105<br /></b><i>Małgorzata Wiśniewska</i></p> <p>4.1 Introduction and History 105</p> <p>4.2 Polymerization and Fabrication 107</p> <p>4.3 Properties 110</p> <p>4.4 Chemical Stability 111</p> <p>4.5 Compounding and Special Additives  112</p> <p>4.6 Processing  113</p> <p>4.7 Applications  114</p> <p>4.8 Blends of Polyacrylamide  116</p> <p>4.9 Composites of Polyacrylamide  118</p> <p>4.10 Nanocomposites of Polyacrylamide  119</p> <p>4.11 Environmental Impact and Recycling  121</p> <p>4.12 Conclusions  122</p> <p><b>5 Effect of Nanostructured Polyhedral Oligomeric Silsesquioxone on High Performance Poly(urethane-imide) 133<br /></b><i>Dhorali Gnanasekaran</i></p> <p>5.1 Introduction 134</p> <p>5.2 Experimental 136</p> <p>5.3 Results and Discussion 138</p> <p>5.4 Conclusions 145</p> <p><b>6 Thermoplastic Polyimide (TPI) 149<br /></b><i>Xiantao Feng and Jialei Liu</i></p> <p>6.1 Introduction and History 149</p> <p>6.2 Polymerization and Fabrication 150</p> <p>6.2.1 Thermoplastic Polyimides Based on BEPA 150</p> <p>6.2.2 Thermoplastic Polyimides based on PMDA 153</p> <p>6.2.3 Thermoplastic Polyimides Based on BTDA 154</p> <p>6.2.4 Thermoplastic Polyimides Based on ODPA 157</p> <p>6.2.5 Thermoplastic Polyimides Based on BPDA 157</p> <p>6.2.6 Thermoplastic Copolyimides 158</p> <p>6.3 Properties 160</p> <p>6.3.1 TPI Based on BEPA 160</p> <p>6.3.2 Thermoplastic Polyimides based on PMDA 163</p> <p>6.3.3 TPI Based on ODPA 163</p> <p>6.3.4 Thermoplastic Polyimides Based on BPDA 168</p> <p>6.3.5 Thermoplastic Copolyimides 170</p> <p>6.4 Chemical Stability 170</p> <p>6.4.1 Hydrolytic Stability 170</p> <p>6.4.2 Oxidative Stability 174</p> <p>6.5 Compounding 175</p> <p>6.5.1 Chloromethylation 175</p> <p>6.5.2 Sulfonation 178</p> <p>6.5.3 Phosphorylation 178</p> <p>6.5.4 Bromination 178</p> <p>6.5.5 Arylation 181</p> <p>6.6 Processing 181</p> <p>6.6.1 Injection Molding 181</p> <p>6.6.2 Compression Molding 182</p> <p>6.6.3 Extrusion Molding 184</p> <p>6.6.4 Coating 184</p> <p>6.6.5 Spinning [40] 186</p> <p>6.7 Applications 186</p> <p>6.7.1 Membranes 186</p> <p>6.7.2 Adhesives 188</p> <p>6.7.3 Composites 189</p> <p>6.7.3.1 Skybond 190</p> <p>6.7.4 Engineering Plastics 190</p> <p>6.7.4.1 VESPEL Plastics 190</p> <p>6.7.4.2 ULTEM Plastics [48, 49] 191</p> <p>6.7.4.3 AURUM Plastics [50] 192</p> <p>6.7.4.3 Ratem Plastics [51] 192</p> <p>6.8 Blends of Thermoplastic Polyimide (TPI) 193</p> <p>6.8.1 TPI Blends with TPI 193</p> <p>6.8.2 Polyamic Acid Blending 195</p> <p>6.9 Composites of Thermoplastic Polyimide (TPI) 196</p> <p>6.9.1 LaRC Composites 197</p> <p>6.9.2 Skybond 202</p> <p>6.9.3 PAI Polyamide-Imide Composites 205</p> <p>6.10 Nanocomposites of Thermoplastic Polyimide (TPI) 208</p> <p>6.10.1 TPI/silver Nanocomposite 208</p> <p>6.10.2 TPI/Fe-FeO Nanocomposite 210</p> <p>6.10.3 TPI/Carbon Nanocomposites 211</p> <p>6.10.4 TPI/CF/TiO2 Nanocomposite 214</p> <p>6.11 Environmental Impact and Recycling 214</p> <p>6.12 Conclusions 215</p> <p><b>7 Performance Properties and Applications of Polytetrafluoroethylene (PTFE) -- A Review 221<br /></b><i>E. …”
Full-text access

Urban Eco-Communities in Australia Real Utopian Responses to the Ecological Crisis or Niche Markets? / by Cooper, Liam, Baer, Hans A.

Full-text access

Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics

Table of Contents: “…Influence of Sample Preparation on Determined Nanomechanical Properties of Metastable Calcium Carbonate Polymorphs -- Crystallization and Dissolution of Common Salts - Damage Potential to Porous Media -- Torsional shear testing of mortar -- Comparative tests of strengthening effects on weak mortars consolidated with various agents -- Novel Device for 4-point Flexural Testing of Quasi-brittle Materials during 4D Computed Tomography -- Effects of Long-term Aging on the Low-cycle Fatigue Behavior of Inconel 718 superalloy -- Enhanced Young's modulus in percolative cementitious composites reinforced with carbon nanotubes -- Behavior of Partially and Fully FRP-Confined Circularized Square Columns (CSCs) under Axial Compression -- Stress-Strain Behavior of Circular Concrete Columns Partially Wrapped with FRP Strips -- Improving the Tribological Properties of Ti6Al4V Alloy with Multi-Walled Carbon Nanotube Additions.…”
Full-text access

Laser Beam Micro-milling of Micro-channels in Aerospace Alloys

Full-text access

Law and Democracy in Contemporary India Constitution, Contact Zone, and Performing Rights /

Full-text access

3D Printing and Additive Manufacturing Technologies

Table of Contents: “…Chapter 1: Finite Element Analysis of Melt Pool Characteristics in Selective Laser Spot Melting on a Powder Layer -- Chapter 2: Thermal Transport Phenomena in Multi-Layer Deposition using Arc Welding Process -- Chapter 3: Comparison of Bonding strength of Ti-6Al-4V alloy deposit and substrate processed by laser metal deposition -- Chapter 4: Study on Rayleigh-Bénard convection in Laser Melting process -- Chapter 5: ENHANCING SURFACE FINISH OF FUSED DEPOSITION MODELLING PARTS -- Chapter 6: Development and Analysis of Accurate and Adaptive FDM Post Finishing Approach -- Chapter 7: Toolpath Generation for Additive Manufacturing using CNC Milling Machine -- Chapter 8: Modelling of Heat Transfer in Powder Bed Based Additive Manufacturing Process using Lattice Boltzmann Method -- Chapter 9: Effect of process parameters on mechanical properties of solidified PLA parts fabricated by 3D Printing process -- Chapter 10: Metal Powder Based Additive Manufacturing Technologies - Business Forecast.…”
Full-text access

Polietilen, nişasta ve polilaktik asit polimer karışımlarından çevreci kompozit gıda filmlerinin geliştirilmesi / by Coşkun, Burcu

Proceedings of the Symposium of Aeronautical and Aerospace Processes, Materials and Industrial Applications Presented at the XXV International Materials Research Congress - Cancun...

Table of Contents: “…Finite element modelling of friction stir spotwelding (fssw) of ti-6al-4v -- chapter 12. Parametric effects in hybrid lap joints of composite materials use in aircraft structures.…”
Full-text access

Manufacturing Engineering Select Proceedings of CPIE 2018 /

Table of Contents: “…-Friction stir welding of shipbuilding grade DH36 steel -- Experimental investigation on the effect of cryogenic co2 cooling in end milling of aluminium alloy -- Transient thermal analysis of CO2 laser welding of AISI 304 stainless steel thin plates -- Transient Thermal Analysis On Friction Stir Welding Of AA6061 -- Recycling Of H30 Aluminium Alloy Swarfs Through Gravity Die Casting Process -- Effect on Mechanical and Metallurgical Property of Cryogenic Treated Material SS316 -- Microstructure And Mechanical Properties Of Lamellar TI-6AL-4V Eli Alloy -- Influence Of Process Parameters On Surface Roughness Hole Diameter Error And Burr Height In Drilling Of 304l Stainless Steel -- Investigation Of Impression Creep Deformation Behaviour Of Boron Modified P91 Steel By High End Characterization Techniques -- Tribological and Machining Performance of Graphite, CaF2 and MoS2 Coated Mechanical Micro-Textured Self-Lubricating Cutting Tool -- Chemical Assisted USM Of Acrylic Heat Resistant (BS-476) Glass -- Study Of Temperature Distribution During Fsw Of Aviation Grade AA6082.…”
Full-text access

Fuel cell systems explained / by Dicks, Andrew, Rand, D. A. J. (David Anthony James), 1942-

Table of Contents: “…5.2 System Designs -- 5.2.1 Circulating Electrolyte Solution -- 5.2.2 Static Electrolyte Solution -- 5.2.3 Dissolved Fuel -- 5.2.4 Anion-Exchange Membrane Fuel Cells -- 5.3 Electrodes -- 5.3.1 Sintered Nickel Powder -- 5.3.2 Raney Metals -- 5.3.3 Rolled Carbon -- 5.3.4 Catalysts -- 5.4 Stack Designs -- 5.4.1 Monopolar and Bipolar -- 5.4.2 Other Stack Designs -- 5.5 Operating Pressure and Temperature -- 5.6 Opportunities and Challenges -- Further Reading -- Chapter 6 Direct Liquid Fuel Cells -- 6.1 Direct Methanol Fuel Cells -- 6.1.1 Principles of Operation -- 6.1.2 Electrode Reactions with a Proton-Exchange Membrane Electrolyte -- 6.1.3 Electrode Reactions with an Alkaline Electrolyte -- 6.1.4 Anode Catalysts -- 6.1.5 Cathode Catalysts -- 6.1.6 System Designs -- 6.1.7 Fuel Crossover -- 6.1.8 Mitigating Fuel Crossover: Standard Techniques -- 6.1.9 Mitigating Fuel Crossover: Prospective Techniques -- 6.1.10 Methanol Production -- 6.1.11 Methanol Safety and Storage -- 6.2 Direct Ethanol Fuel Cells -- 6.2.1 Principles of Operation -- 6.2.2 Ethanol Oxidation, Catalyst and Reaction Mechanism -- 6.2.3 Low-Temperature Operation: Performance and Challenges -- 6.2.4 High-Temperature Direct Ethanol Fuel Cells -- 6.3 Direct Propanol Fuel Cells -- 6.4 Direct Ethylene Glycol Fuel Cells -- 6.4.1 Principles of Operation -- 6.4.2 Ethylene Glycol: Anodic Oxidation -- 6.4.3 Cell Performance -- 6.5 Formic Acid Fuel Cells -- 6.5.1 Formic Acid: Anodic Oxidation -- 6.5.2 Cell Performance -- 6.6 Borohydride Fuel Cells -- 6.6.1 Anode Catalysts -- 6.6.2 Challenges -- 6.7 Application of Direct Liquid Fuel Cells -- Further Reading -- Chapter 7 Phosphoric Acid Fuel Cells -- 7.1 High-Temperature Fuel-Cell Systems -- 7.2 System Design -- 7.2.1 Fuel Processing -- 7.2.2 Fuel Utilization -- 7.2.3 Heat-Exchangers -- 7.2.3.1 Designs -- 7.2.3.2 Exergy Analysis -- 7.2.3.3 Pinch Analysis.…”
Full-text access

Minimum Design Loads and Associated Criteria for Buildings and Other Structures. by (ASCE), American Society of Civil Engineers

Table of Contents: “…Runup Evaluation for Areas Where No Map Values Are Given -- 6.5.2 Tsunami Risk Category IV Buildings and Other Structures -- 6.5.3 Sea Level Change -- 6.6 Inundation Depths and Flow Velocities Based on Runup -- 6.6.1 Maximum Inundation Depth and Flow Velocities Based on Runup -- 6.6.2 Energy Grade Line Analysis of Maximum Inundation Depths and Flow Velocities -- 6.6.3 Terrain Roughness -- 6.6.4 Tsunami Bores -- 6.6.5 Amplified Flow Velocities -- 6.7 Inundation Depths and Flow Velocities Based on Site-Specific Probabilistic Tsunami Hazard Analysis -- 6.7.1 Tsunami Waveform -- 6.7.2 Tsunamigenic Sources -- 6.7.3 Earthquake Rupture Unit Source Tsunami Functions for Offshore Tsunami Amplitude -- 6.7.4 Treatment of Modeling and Natural Uncertainties -- 6.7.5 Offshore Tsunami Amplitude -- 6.7.5.1 Offshore Tsunami Amplitude for Distant Seismic Sources -- 6.7.5.2 Direct Computation of Probabilistic Inundation and Runup -- 6.7.5.3 Use of Higher-Order Tsunami Model Features -- 6.7.6 Procedures for Determining Tsunami Inundation and Runup -- 6.7.6.1 Representative Design Inundation Parameters -- 6.7.6.2 Seismic Subsidence before Tsunami Arrival -- 6.7.6.3 Model Macroroughness Parameter -- 6.7.6.4 Nonlinear Modeling of Inundation -- 6.7.6.5 Model Spatial Resolution -- 6.7.6.6 Built Environment -- 6.7.6.7 Inundation Model Validation -- 6.7.6.7.1 Historical or Paleotsunami Inundation Data.…”
Full-text access

Deep Learning : Foundations and Concepts. by Bishop, Christopher M.

Table of Contents: Full-text access

Advances in 3D Printing & Additive Manufacturing Technologies

Table of Contents: “…Influence of Process Parameters on Tensile Strength of Additive Manufactured Polymer Parts using Taguchi Method -- Determination and Comparison of the Anisotropic Strengths of Fused Deposition Modeling P400 ABS -- Estimating the Effect of Process Parameters on Build Time and Model Material Volume for FDM Process Optimization by Response Surface Methodology and Grey Relational Analysis -- Current Trends of Additive Manufacturing in the Aerospace Industry -- Influence of Oxygen Partial Pressure on Hydroxyapatite Coating of Additive Manufactured component by Pulsed Laser Deposition -- Electro Discharge Machining of Ti-alloy(Ti6Al4V) and 316LStainless Steel and Optimization of Process Parameters by Grey Relational Analysis (GRA) Method -- Multi-Objective Optimization of Mechanical Properties of Aluminium 7075 Based Hybrid Metal Matrix Composite using Genetic Algorithm -- A Review on Status of Research in Metal Additive Manufacturing -- Multi Response Optimization of Nd: YAG Laser for Micro Drilling of 304Stainless Steel using Grey Relational Analysis -- Additive Manufacturing at French Space Agency with Industry Partnership -- Wear Characterization of Direct Steel -H20 Specimens Produced by Additive Manufacturing Techniques -- Rapid Manufacturing of Customized Surgical Cutting Guide for the Accurate Resection of Malignant Tumor in the Mandible -- Implant Analysis on the Lumbar-Sacrum Vertebrae using Finite Element Method -- An Automated Acupressure Glove For Stress & Pain Relief Using 3D Printing -- Development and Optimization of Dental Crown using Rapid Prototyping Integrated with CAD.…”
Full-text access

Blast Protection of Buildings. by Engineers, American Society of Civil

Table of Contents: “…9.3.3.1 General -- 9.3.3.1.1 -- 9.3.3.1.2 -- 9.3.3.2 Welded Connections -- 9.3.3.2.1 -- 9.3.3.2.2 -- 9.3.3.2.3 -- 9.3.3.3 Bolted Connections -- 9.3.3.3.1 -- 9.3.3.3.2 -- 9.3.4 Open Web Steel Joists -- 9.3.4.1 -- 9.3.4.2 -- 9.3.4.3 -- 9.3.4.4 -- 9.3.4.5 -- 9.4 STEEL/CONCRETE COMPOSITE -- 9.4.1 Scope -- 9.4.2 Concrete Slab on Metal Deck -- 9.4.2.1 -- 9.4.2.2 -- 9.4.2.3 -- 9.4.2.4 -- 9.4.2.5 -- 9.4.2.6 -- 9.4.2.7 -- 9.4.2.8 -- 9.4.2.9 -- 9.4.2.10 -- 9.4.2.11 -- 9.4.3 Composite Columns -- 9.4.3.1 -- 9.4.3.2 -- 9.4.3.3 -- 9.4.3.4 -- 9.4.3.5 -- 9.4.3.7 -- 9.4.4 Steel-plate Composite Walls -- 9.4.4.1 -- 9.4.4.2 -- 9.4.4.3 -- 9.4.4.4 -- 9.4.4.5 -- 9.4.4.6 -- 9.4.4.7 -- 9.4.4.8 -- 9.4.4.9 -- 9.4.4.10 -- 9.5 MASONRY -- 9.5.1 Scope -- 9.5.2 General Design Requirements -- 9.5.2.1 -- 9.5.2.2 -- 9.5.3 General Material Requirements -- 9.5.3.1 -- 9.5.3.2 -- 9.5.3.3 -- 9.5.3.4 -- 9.5.3.5 -- 9.5.4 General Detailing Requirements -- 9.5.4.1 -- 9.5.4.2 -- 9.5.4.3 -- 9.5.4.4 -- 9.5.4.5 -- 9.5.4.6 -- 9.5.4.7 -- 9.5.5 Walls -- 9.5.5.1 Vertical Reinforcement -- 9.5.5.1.1 -- 9.5.5.1.2 -- 9.5.5.1.3 -- 9.5.5.1.4 -- 9.5.5.1.5 -- 9.5.5.2 Horizontal Reinforcement -- 9.5.5.2.1 -- 9.5.5.2.2 -- 9.5.5.2.3 -- 9.5.5.3 Bond Beams -- 9.5.5.3.1 -- 9.5.5.4 Control Joints -- 9.5.5.4.1 -- 9.5.5.4.2 -- 9.5.5.4.3 -- 9.6 FIBER REINFORCED POLYMER COMPOSITE -- 9.6.1 Scope -- 9.6.2 General -- 9.6.2.1 -- 9.6.2.2 -- 9.6.2.3 -- 9.6.3 Material Properties -- 9.6.3.1 -- 9.6.3.2 -- 9.6.3.3 -- 9.6.3.4 -- 9.6.4 Strengthening of Structural Members -- 9.6.4.1 -- 9.6.4.2 -- 9.6.4.3 -- 9.6.4.4 -- 9.6.5 Confinement of Structural Members -- 9.6.5.1 -- 9.6.5.2 -- 9.6.5.3 -- 9.7 OTHER MATERIALS -- 9.7.1 Aluminum -- 9.7.2 Wood -- 9.7.3 Cold-Formed Steel -- 9.7.3.1 Scope -- 9.7.3.2 General -- 9.7.3.3 Members -- 9.7.3.3.1 -- 9.7.3.3.2 -- 9.7.3.3.3 -- 9.7.3.4 Connections -- Chapter 10: PERFORMANCE QUALIFICATION.…”
Full-text access

Mechanics of Additive and Advanced Manufacturing, Volume 8 Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /

Table of Contents: “…Chapter1: Structure/Property Behavior of Additively Manufactured (AM) Materials: Opportunities & Challenges -- Chapter2: Fatigue Characterization of 3D-printed Maraging Steel by Infrared Thermography -- Chapter3: Quasi-Static and Dynamic Fracture of Additively Printed ABS Studied using DIC: Role of Build Architecture and Loading Rate -- Chapter4: Compression and Shear Response of 3D Printed Foam Pads -- Chapter5: Mechanical Structure-Property Relationships for 2D Polymers Comprised of Nodes and Bridge Units -- Chapter6: Mechanical Behavior of Additively Manufactured Ti-6Al-4V Following a New Heat Treatment -- Chapter7: Dynamic Thermal Softening Behavior of Additive Materials for Hybrid Manufacturing -- Chapter8: Correlation between Process Parameters and Mechanical Properties in Parts Printed By the Fused Deposition Modeling Process -- Chapter9: Mechanical Characterization of Cellulose Nanofibril Materials made by Additive Manufacturing -- Chapter10: Shock Propagation and Deformation of Additively-Manufactured Polymer Foams with Engineered Porosity -- Chapter11: Mechanical Characterization of Fused Filament Fabrication Polyvinylidene Fluoride Printed (PVDF) Composites -- Chapter12: Influence of an Extreme Environment on the Tensile Mechanical Properties of a 3D Printed Thermoplastic Polymer -- Chapter13: A Framework for Estimating of Mold Performance Using Experimental and Numerical Analysis of Injection Mold Tooling Prototypes -- Chapter14: Effect of Processing Parameters on Interlayer Fracture Toughness of Fused Filament Fabrication Thermoplastic Materials -- Chapter15: Forced-Response Verification of Unique Additive Manufactured Vibration Suppressed Specimens -- Chapter16: Computational and Experimental Characterization of 3D Printed Components by Fused Deposition Modeling -- Chapter17: Linking Thermal History to Mechanical Behavior in Directed Energy Deposited Materials. .…”
Full-text access

Innovative Design and Development Practices in Aerospace and Automotive Engineering I-DAD, February 22 - 24, 2016 /

Table of Contents: “…Fatigue and Fracture Reliability of Additively Manufactured Al-4047 and Ti-6Al-4V Alloys for Automotive and Aerospace Applications -- Chapter 7. …”
Full-text access

Heat Transfers in Polymer Composite Materials Forming Processes.

Table of Contents: “…Concluding remarks; 3.6. Bibliography; 4 Phase Change Kinetics within Process Conditions and Coupling with Heat Transfer; 4.1. …”
Full-text access

Precision Product-Process Design and Optimization Select Papers from AIMTDR 2016 /

Table of Contents: “…PART I: Precision Product Design and Control -- Optimal Design of a Stewart-Gough Platform for Multi- Directional Additive Manufacturing -- Task level Planning and Implementation of Robotic Assembly Under Machine Vision Guidance -- Position and Impedance Control of a Multi-Finger Tendon-Driven Robotic Hand -- A Piezoelectric Actuator Based Compact Micro Manipulation System for Robotic Assembly -- Experimental Studies and Numerical Simulations of a Displacement Amplifying Compliant Mechanism -- PART II: Process Modelling and Optimization -- Numerical Modelling of SLM Additive Manufacturing for Magnesium Alloy -- Finite Element Analysis of Residual Stress in Selective Laser Melting of Ti6Al4V Powder Layer -- Parametric Optimization of 3D Printing Process using MCDM Method -- Towards Development of an Intelligent PCD Insert Clock Testing Method and Prediction of Product Performance -- Focused Ion Beam Fabrication: Process Development and Optimization Strategy for Optical Applications -- Machining Guidelines for Fabricating Microgrooves of Varied Cross-sections by Electrochemical Micromachining -- Multi Response Optimization of Powder Mixed EDM Machining Parameters Using Taguchi Based TOPSIS Method -- Optimization of Single Pitch Error and MRR in a WEDM Gear cutting Process Using MOORA Method -- Abrasive Flow Nano Finishing of High Aspect Channels using Different Polymer Rheological Abrasive Medium -- Optimizing Toolpath Generation in Magnetic Field Assisted Finishing Process During Nanofinishing of Biomaterials -- Study of Surface Integrity in Conventional and Ultrasonic Assisted Turning with Self -lubricating Cutting Inserts -- Parametric Analysis and Optimization of Surface Finish During Microtexturing on Titanium Using Pulsed Nd YAG Laser -- A Novel Approach for Prediction and Calculation of Sheet Thinning in Incremental Sheet Forming -- Optimum allocation of machines with multiple objectives using NSGA-II.…”
Full-text access

Advanced Tire Mechanics. by Nakajima, Yukio

Table of Contents: “…5.7.2 Application and Validation of GUTT -- Appendix: Equation of the Tire Shape for the Partitioned Tire Pressure of the Belt Given by Eq. (5.108) -- Notes -- References -- 6 Spring Properties of Tires -- 6.1 Tire Spring of a Simple Tire Model -- 6.1.1 Spring Properties of Tires -- 6.1.2 Radial Fundamental Spring Rate -- 6.1.3 Lateral Fundamental Spring Rate -- 6.1.4 Circumferential Fundamental Spring Rate -- 6.1.5 Contribution of Structural and Tensile Stiffness to the Vertical Spring Rate -- 6.2 Tire Spring Rates of the Rigid Ring Model -- 6.2.1 Torsional Spring Rate -- 6.2.2 Lateral Spring Rate -- 6.2.3 Eccentric Spring Rate of the Rigid Ring Model -- 6.2.4 In-Plane Rotational Spring Rate -- 6.2.5 Fore-Aft Spring Rate of the Rigid Ring Model -- 6.2.6 Measurement Procedure for Fundamental Spring Rates and Tire Spring Rates -- 6.3 Tire Spring Rates of the Flexural Ring Model -- 6.3.1 Lateral Spring Rate of a Tire with a Flexural Ring -- 6.3.2 Torsional Spring Rate of a Tire with a Flexural Ring -- 6.4 Fundamental Spring Rates Based on the Equilibrium Shape of Belted Radial Tires -- 6.4.1 Theory of Tire Shape -- 6.4.2 Lateral Fundamental Spring Rate -- 6.4.3 Circumferential Fundamental Spring Rate -- 6.4.4 Radial Fundamental Spring Rate -- 6.5 Modification of Yamazaki's Model -- 6.5.1 Modification of Yamazaki's Model -- 6.5.2 Contribution of Bending and Extensional Deformation of the Sidewall Material to Fundamental Spring Rates -- 6.6 Line Spring Rate -- 6.7 Visualization of the Spring Rate -- Notes -- References -- 7 Mechanics of the Tread Pattern -- 7.1 Shear Spring Rate of the Tire Block Pattern -- 7.1.1 Fundamental Equations for an Analytical Approach -- 7.1.2 Calculation of the Block Rigidity of a Practical Block Pattern -- 7.1.3 Comparison of Prediction and Measurement Results -- 7.1.4 FEA Approaches for Block Rigidity.…”
Full-text access