Arama Sonuçları - "The Crucible"

Applications of Process Engineering Principles in Materials Processing, Energy and Environmental Technologies An EPD Symposium in Honor of Professor Ramana G. Reddy /

İçindekiler: “…-- The influence of phosphorous additions on phase evolution in molten coal slag -- The Recovery of Copper From Smelting Slag by Flotation Process -- Reaction Mechanisms in the Silicothermic Production of Magnesium -- Influences of CaO/SiO2/MgO/Al2O3 on the Formation Behavior of FeO-bearing Primary-slags in Blast Furnace -- Desulfurization of high sulfur coal leached with H2O2 and NaOH by microwave irradiation -- Part 5: Pyrometallurgy II -- Chloridizing Roasting of Bismuthinite with Sodium Chloride-Oxygen -- Natural Gas Utilization in Blast Furnace Ironmaking: Tuyère Injection, Shaft Injection and Prereduction -- Selective Sulfation Roasting of Rare Earths from NdFeB Magnet Scrap -- Gold solubility in smelting slags for the recycling of industrial and mining wastes -- Solid State Reduction Behavior of Iron, Chromium and Manganese Oxide Ores with Methane -- Stibnite chloridizing with calcium chloride-oxygen at roasting temperatures -- Investigations on Rotary Tool Near-dry Electric Discharge Machining -- Dependence of Ti2O3 and Temperatures on Electrical Conductivity of TiO2-FeO-Ti2O3 slags -- Part 6: Materials Processing and Plasma Processing -- PTA Cladding for Wear Application -- Production of SiMn-alloys by natural gas and Carbon black -- Effect of Flux Ratio on the Products of Self Propagating High Temperature Synthesis-Casting in WO3-Si-Al System -- Synthesis of Chrysin Based Cationic Lipids: Plasmid Delivery and Transgene Expression -- Part 7: Energy Storage and Engineering Issues -- Corrosion Mechanism of Haynes 230 with Ni Crucible in MgCl2-KCl -- Conceptualization of doped Black P thin films for potential use in photovoltaics with validation from first principle calculations -- Energy Efficiency and Sustainability in Steel Production -- Application of Surface Effect on Metallurgical Processes -- Part 8: Modeling and Simulation -- Metal Silicides for High-Temperature Thermoelectric Application -- CFD Modeling of Slag-Metal Reactions and Sulfur Refining Evolution in an Argon Gas-Stirred Ladle Furnace -- Numerical Study of the Fluid Flow and Temperature Distribution in DC non-transferred Arc Thermal Plasma Reactor -- Part 9: Thermodynamics and Kinetics -- Thermodynamic Studies on the Mg-B System using Solid State Electrochemical Cells -- An Investigation on the Kinetics and Mechanism of Alkali Reduction of Mine Waste containing Titaniferous Minerals for the Recovery of Metals -- Empirical Activation Energies of MnO and SiO2 Reduction In SiMn Slags between 1500 and 1650°C -- Experimental evaluation of thermodynamic interactions between tellurium and various elements in molten iron -- Thermodynamics of simultaneous desulfurization and dephosphorizaion of SiMn alloy -- Isothermal Reduction Behavior of CaO-Fe2O3-8wt%SiO2 System at 1123K, 1173K and 1223K with CO-N2 Gas Mixtures -- A Review of Some Studies on Impurity Capacity Predictions in Molten Melts -- Part 10: Poster Session -- Application of Sharp Analysis on Reduction Kinetics of Vanadium Titanium Magnetite Sintering Ore -- High Temperature Properties of Molten Nitrate Salt for Solar Thermal Energy Storage Application -- Influence of diluents dosage on the performance of high solid Anti-corrosion Coating by Converter Dust -- Permselectivity study of ion-exchange membranes in the presence of Cu-HEDP complexes from a copper plating wastewater treatment -- Treatment of Blast Furnace Gas Washing Water by Utilization of Coagulation Associated with Microwave. .…”
Full-text access
OPAC'ta görüntüle

Light Metals 2019

İçindekiler: “…Cast Shop Technology -- Root Cause Analysis Findings of a Force 3 Explosion -- Condensation Warning System for Dry Material Storage -- A New Aluminium Crucible Skimmer (ACS) for Smelter Plants - Main Benefits Further to Two Years of Experimentation in Industrial Environment -- Drive-in Feeding of Crucibles for Casting Machine -- In-line Salt Fluxing Process with an FFDTM Industrial Experience with a Box-Type Degasser -- The "Alcoa Filter System": A Cost Effective Solution for Enhanced CFF Performance -- Continuous Centrifugal Casting: A Revolutionary Process for Casting Aluminium Tubes -- Development of a Prototype Unit for Continuous Centrifugal Casting of Aluminium Tubes -- Constellium's R&D on the Use of Power Ultrasound in Liquid Aluminum: An Overview -- Molten Metal Cleanliness: Recent Developments to Improve Measurement Reliability -- On-site Benchmark of LiMCA II vs. …”
Full-text access
OPAC'ta görüntüle

Light Metals 2018

İçindekiler: “…Cast Shop Technology -- Root Cause Analysis Findings of a Force 3 Explosion -- Condensation Warning System for Dry Material Storage -- A New Aluminium Crucible Skimmer (ACS) for Smelter Plants - Main Benefits Further to Two Years of Experimentation in Industrial Environment -- Drive-in Feeding of Crucibles for Casting Machine -- In-line Salt Fluxing Process with an FFDTM Industrial Experience with a Box-Type Degasser -- The "Alcoa Filter System": A Cost Effective Solution for Enhanced CFF Performance -- Continuous Centrifugal Casting: A Revolutionary Process for Casting Aluminium Tubes -- Development of a Prototype Unit for Continuous Centrifugal Casting of Aluminium Tubes -- Constellium's R&D on the Use of Power Ultrasound in Liquid Aluminum: An Overview -- Molten Metal Cleanliness: Recent Developments to Improve Measurement Reliability -- On-site Benchmark of LiMCA II vs. …”
Full-text access
OPAC'ta görüntüle

Energy Technology 2017 Carbon Dioxide Management and Other Technologies /

İçindekiler: “…Part 1: Energy Technologies: Energy Technologies -- Continuous optimization of the energy input - The success story of AOS -- Part 2: Energy Technologies: CO2 Management and Sustainable Metallurgical Processes -- Transforming the way electricity is consumed during the aluminium smelting process -- The thermodynamics of slag forming inorganic phases in biomass combustion processes -- Leaching of Sb from TROF furnace Doré Slag -- Potential CO2 emission reduction and H2 production using industrial slag wastes originating from different industrial sectors -- Part 3: Energy Technologies: Novel Technologies -- Modeling Anthropogenic Heat Flux in Climate Models -- In-situ microscopic study of morphology changes in natural hematite and Cu-spinel particles during cyclic redox gas exposures for chemical looping applications -- Thermodynamic stability of condensed phases in the ternary system CaO-Cu-O by the EMF method -- Experimental Study on Electro-spraying of Ethanol Based on PDA Measurement -- Part 4: Energy Technologies: Heat Recovery -- Integrated utilization of sewage sludge and coal gangue in clinker manufacture -- Valuable metals and energy recovery from electronic waste streams -- Dry Granulation of Hot Metal and Heat Recovery from Off-Gas -- Energy Recovery of Livestock Waste in Taiwan -- Life cycle assessments of incineration treatment for sharp medical waste -- Part 5: Energy Technologies: Poster Session -- Effect of granularity on pretreatment of coke with microwave irradiation -- Effect of Microwave and ultrasonic coupling treatment on granularity and microstructure of Pulverized Coal -- Influence of Sodium on Coke Microstructure in Different Reaction Atmosphere -- Part 6: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste I -- Maximizing the values of steelmaking slags -- Recycling of zinc from the steelmaking dust in the sintering process -- Direct Preparation of Metal Doping Ni-Zn Ferrite from Zn-containing Electric Arc Furnace Dust by Calcination Method -- Part 7: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste II -- Synthesis and Characterization of Ferrochromium Slag Based Glass-ceramics -- Hydrometallurgical processing of copper smelter dust for copper recovery as nanoparticles: a review -- Part 8: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste III -- Chromium removal from iron-rich waste generated during processing lateritic nickel ores -- Removal of Magnesium from Liquor Produced by Nickel Mining by Crystallization -- Synthesis of Magnesium Oxide from Ferronickel Smelting Slag through Hydrochloric Acid Leaching-Precipitation and Calcination -- Thermodynamic analysis of the recycling of aircraft Al alloys -- Lithium-ion Battery Recycling Through Secondary Aluminum Production -- Part 9: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Poster Session -- Alternative method for materials separa-tion from crystalline silicon photovoltaic modules -- Bioleaching process for metal recovery from waste materials -- Chemical Analysis of Sludge Originating from Industrial Painting Performed in Brazil -- Preparing ferrosilicon alloy with copper slag -- Research on Optimization of Sintering Mixture with Low-grade Complex Ore -- Part 10: Solar Cell Silicon: Silicon Production, Crystallization, and Properties -- Study on Producing Solar Grade Silicon by Carbothermal Reduction of Andalusite Ore -- Phase Analysis of the Si-O2 System -- Characterization of Composition, Morphology, and Structure of Disi Raw Sandstones in Jordan -- Part 11: Solar Cell Silicon: Silicon Impurity Removal and Refining -- Effect of magnesium addition on removal of impurities from silicon by hydrometallurgical treatment -- Evaporation removal of boron in molten silicon using reactive fluxes -- Part 12: Solar Cell Silicon: Silicon Photovoltaics -- Electrodynamic Eddy Current Separation of End-of-Life PV Materials -- Investigation on Quartz Crucibles for Monocrystalline Silicon Ingots for Solar Cells -- Influence of Oxygen Content on the Wettability of Silicon on Graphite -- Particle Separation in Silicon Ingot Casting Using AC Magnetic Field -- Part 13: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Advances in Environmental Technologies: Characterization and Uncertainty -- Characteristics of Municipal Solid Waste Incineration Bottom Ash with Particulate Matters PM2.5 ~PM10 -- Part 14: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: New Areas of Value Recovery -- Accelerating life-cycle management protocols for new generation batteries -- Recovery of Metals and Nonmetals from Waste Printed Circuit Boards (PCBs) by Physical Recycling Techniques -- The use of rice husk ash as an aggregate for foundry sand mould production -- Part 15: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Poster Session -- Chemical reduction of Fe(III) in nickel lateritic wastewater to recover metals by ion exchange -- Chronopotentiometry applied to the determination of copper transport properties through a cation-exchange membrane -- Effect of flow rate on metals adsorption of synthetic solution using chelating resin Dowex XUS43605 in column experiments.…”
Full-text access
OPAC'ta görüntüle