Arama Sonuçları - "aluminium"

Energy and Resource Efficiency in Aluminium Die Casting Yazar: Heinemann, Tim

İçindekiler: “…Introduction -- Aluminium die casting and its environmental aspects -- Existing approaches -- Multi-level multi-scale framework for enhancing energy and resource efficiency in production -- Multi-level multi-scale framework for enhancing energy and resource efficiency in aluminium die casting -- Summary and Outlook.…”
Full-text access

Current Trends in Friction Stir Welding (FSW) and Friction Stir Spot Welding (FSSW) An Overview and Case Studies / Yazar: Mubiayi, Mukuna Patrick, Akinlabi, Esther Titilayo, Makhatha, Mamookho Elizabeth

İçindekiler: “…1 General Introduction -- 2 Friction stir welding of similar aluminium alloys -- 3 Friction stir welding of dissimilar aluminium alloys -- 4 Friction stir welding between aluminium and copper -- 5 Friction stir spot welding between similar aluminium alloys -- 6 Friction stir spot welding between dissimilar aluminium alloys -- 7 Friction stir spot welding between aluminium and copper -- 8 Microstructure and chemical analysis of friction stir spot welding between aluminium and copper (case study) -- 9 Microhardness profile and shear tensile test of FSSWelds AA1060 to C11000 (case study) -- 10 Residual stresses in friction stir spot welded AA1060 to C11000 using X-ray diffraction technique (case study) -- 11 General conclusions and recommendations for future work.…”
Full-text access

Light Metals 2017

İçindekiler: “…Part 1: Alumina & Bauxite: Digestion and Calcination -- CFB Alumina Calciners - New and Future Generation Opportunities for Green Field Refineries -- Evolutional Development of Alkaline Aluminosilicates Processing Technology -- Characterization and Ore Dressing of Bauxite from Brazil -- Process Optimization for Diaspore Digestion Equilibrium using Response Surface Methodology -- Thermodynamic analysis and formation law of Q phase of calcium aluminate clinker -- Leaching Behavior of Alumina from Smelting Reduction Calcium Aluminate Slag with Sodium Carbonate Solution -- Part 2: Alumina & Bauxite: Bauxite Residues Technology -- Security Disposal and Comprehensive Utilization of Bauxite Residues -- Bauxite Residue Amendment Through the Addition of Ca and OR Mg Followed By Carbonation -- Application of Tricalcium Aluminate Instead of Lime for the recovery of aluminum in Middle-low Grade Bauxite in Calcification-Carbonization Process -- Low Temperature Reduction of Hematite in Red-Mud to Magnetite -- Recovery of Iron-, Titanium-bearing Constituents from Bauxite Ore Residue via Magnetic Separation Followed by Sulfuric Acid Leaching -- Processing diasporic red mud by the calcification-carbonation method -- Research of Flocculants and Dewatering Additives for Filtration of Red Mud -- Characterization of activated alumina production via spray pyrolysis -- Part 3: Alumina & Bauxite: Non-traditional Resources -- New process research on aluminium production from non-traditional aluminum resource by microwave chlorination -- Opportunities of pseudoboehmite processing from aluminum content raw material at sintering method -- Chemical Alumina Preparation by Using High Alumina Content Fly Ash -- A Novel Process of Alumina Production from Low-grade Bauxite Containing Sulfur -- Iron separation from bauxite through smelting-reduction process -- Thermodynamic behavior of lime desulfurization in sodium aluminate solution -- Part 4: Alumina & Bauxite: Poster Session -- A study on optimization ofprocessing parameters for synthesis of calcium hydroaluminosulfate using response surface methodology -- Part 5: Aluminum Alloys, Processing and Characterization: Alloy Development and Applications -- Design of New 6xxx Series Al Alloy Using the CALPHAD Thermodynamic Database -- Study of an Al-Ca Alloy with Low Young's Modulus -- Production Of 3004 Aluminum Alloy Sheet For Structural Applications From Twin Roll Casting -- Aluminum alloys with tailored TiB2 particles for composite applications -- Development of low expansion and high strength aluminium hybrid composite -- Part 6: Aluminum Alloys, Processing and Characterization: Solidification and Casting -- A model for a-Al(Mn,Fe)Si crystals -- Casting Characteristics of High Cerium Content Aluminum Alloys -- In-situ observation of fragmentation of primary crystals by ultrasonic cavitation in water -- The enhancement of mechanical properties of A356 alloy solidified at lower cooling rate via effectively grain refinement -- Secondary Aluminum Alloys Processed by Semisolid Process for Automotive Application -- Integrated casting-extrusion of an AA6082 aluminum alloy -- On Porosity Formation in Al-Si-Cu Cast Alloys -- Part 7: Aluminum Alloys, Processing and Characterization: Characterization -- Algorithm for Finding the Correlation between the Properties of Wrought Aluminum Alloys, the Chemical Composition and the Processing Parameters -- Analysis of an aluminium alloy containing trace elements -- Determination of aluminum oxide thickness on the annealed surface of 8000 series aluminum Foil by Fourier Transform Infrared Spectroscopy -- Test Uncertainty in Chemical Composition Analysis -- Real Time 3D Imaging and Laser Marking System for Industrial Traceability -- Production and Certification of Arconic Certified Reference Materials -- Characterization of Large Strain Extrusion Machining (LSEM) of AA7050 -- Interaction between fatigue micro-cracks and inclusion/matrix interface in high-strength Al alloy -- Influence of trace element additionson Fe bearing intermetallic solidification of a 6063 Al alloy -- Part 8: Aluminum Alloys, Processing and Characterization: Heat Treatment -- THE OPTIMIZATION OF THE HOMOGENIZATION TREATMENT OF AA7075 -- Precipitation modeling and validation of Al-5%Cu-0.4%Mn alloy using quench factor analysis -- Young's modulus of Al-Si-Mg-Cu based alloys under different heat treatment processes -- Intergranular Corrosion Investigation on EN-AW 6082 Redraw Rod -- The influence of process parameters and thermomechanical history on streaking defects in AA6060 extrusions -- Effect of Heat-treatment on Microstructure and Mechanical Properties of Sonicated Multicomponent AlMgSiCuZn Alloy -- Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys -- Part 9: Aluminum Alloys, Processing and Characterization: Plasticity and Mechanical Behavior -- New Yield Criterion for Description of Plastic Deformation of Face-Centered Cubic Single Crystals -- Quantifying As-cast and Homogenized AA7050 Mechanical Properties through Compression Testing -- Determining a Stable Texture Condition Under Complex Strain Path Deformations in Face Centered Cubic Metals -- Microstructural transition and elevated temperature tensile properties of modified Al-Si-Cu-Mg alloys -- Effects of alloying elements on anneal-hardening behavior of aluminum alloy foils -- Increasing strength and corrosion resistance of AlMgSi alloys by tailor-made thermomechanical processing -- Microstructural optimization of a High Mechanical Properties (HMP) aluminum alloy by using CobaPress™ process -- Cyclic Stress-strain Behavior and Low Cycle Fatigue Life of AA6061 Aluminum Alloy -- Part 10: Aluminum Alloys, Processing and Characterization: Poster Session -- Corrosion of Al-Mg Alloys in Ethanol -- Warm pressing of Al powders: an alternative consolidation approach -- Part 11: Aluminum Reduction Technology: Dry Scrubbing, Alumina Transport and Dissolution -- Spreading of Alumina and Raft Formation on the Surface of Molten Cryolite -- Fluoride Capture Capacity of SGA: The Interplay between Particle and Pore Size Distribution -- Predictive Formulae for the Competitive Adsorption of HF and SO2 on Smeltergrade Alumina Used in Dry Scrubbing Applications -- Pot Gas Treatment at High Gas Temperatures -- Influence of Handling Parameter on Powder Properties -- Part 12: Aluminum Reduction Technology: Anode Effect and PFC Emissions -- Preventive Treatment of Anode Effects Using On-Line Individual Anode Current Monitoring -- Reduction in EGA Jebel Ali Potroom GHG Emissions -- Partial Anode Effect in a Two-Compartment Laboratory Alumina Reduction Cell -- Co-evolution of Carbon Oxides and Fluorides during the Electrowinning of Aluminium with Molten NaF-AlF3-CaF2-Al2O3 Electrolytes -- Part 13: Aluminum Reduction Technology: Cell Lining Materials -- Chemical stability of thermal insulating materials in sodium vapour environment -- AGING OF INSULATING LININGS IN ALUMINIUM ELECTROLYSIS CELLS -- Cathode Wear Based on Autopsy of a Shut down Aluminium Electrolysis Cell -- SPL Recycling and Re-Processing -- Alternative applications of SPL: Testing ideas through experiments and mathematical modeling -- Part 14: Aluminum Reduction Technology: Cell Voltage and Pot Control -- Clustering Aluminium Reduction Cells -- Application of Multivariate Statistical Process Control with STARprobeTM Measurements in Aluminium Electrolysis Cells -- Study Of Impact Of The Anode Slots On The Voltage Fluctuations Of Aluminium Electrolysis Cell Using Bubble Layer Simulator -- Detecting, Identifying and Managing Systematic Potline Issues with Generation 3 Process Control -- Predicting Instability and Current Efficiency of Industrial Cells -- Part 14: Aluminum Reduction Technology: Electrolyte and Fundamentals -- Sodium in Aluminium as a Cell Performance Indicator: A Quantitative Framework -- Bauxite processing via chloride route to produce chloride products and subsequent electrolysis of aluminium chloride to produce aluminium metal -- Stability of Chlorides in Cryolitic Electrolyte -- Role of Heat Transfer in the Formation of Carbon Oxides in Smelting Cells -- Part 15: Aluminum Reduction Technology: Modelling and Cell Design -- Improving The Understanding Of BUSBAR Design And Cell MHD Performance -- LES turbulence modeling approach for molten aluminium and electrolyte flow in aluminum electrolysis cell -- MHD of Large Scale Liquid Metal Batteries -- Low energy consumption cell designs involving…”
Full-text access

Corrosion and Stress Corrosion Testing of Aerospace Vehicle Structural Alloys Yazar: Wanhill, Russell, Windisch, Michael

İçindekiler: “…Environmental severities: natural/outdoor versus accelerated testing -- 5. Aluminium-lithium alloys: some corrosion and SCC issues -- 6. …”
Full-text access

FRICTION STIR WELDING principes and applications;. Yazar: St-Georges, Lyne

Full-text access

Strengthening and Joining by Plastic Deformation Select Papers from AIMTDR 2016 /

İçindekiler: “…Experimental Analysis on Mechanical Behaviour of Commercially Pure Copper Processed by Severe Plastic Deformation Via Equal Channel Angular Pressing -- Fatigue Life Enhancement of Thermally Autofrettaged Cylinders through Shrink-fit -- Development and characterisation of Fine-grained Aluminium for Micro Sheet Metal Forming Operation -- Forming Behaviour of Tri-ply Cladded Sheet Metal of Stainless Steels with Aluminium in Core -- Pulse Electromagnetic Cladding of Al-Tube on DP Steel Rod -- Effect of the Post Weld Heat Treatments on Mechanical and Corrosion Properties of Friction Stir Welded AA 7075-T6 Aluminium Alloy -- Influence of Rotational Speed on the Friction Stir Spot Welding of Polymer Core Sandwich Sheets -- Friction Stir Welding of HDPE Sheets: A Study on the Effect of Rotational Speed -- SiC and Al2O3 Reinforced Friction Stir Welded Joint of Aluminium Alloy 6061 -- Ultrasonic Spot Welding of Dissimilar Metals: Mechanical Behaviour and Microstructural Analysis -- Prediction of CriticalThinning during Self-Pierced Riveting of Sheets -- Distribution of Electromagnetic Field and Pressure of Single Turn Circular Coil for Magnetic Pulse Welding using FEM.…”
Full-text access

Mechanics of Composite and Multi-functional Materials, Volume 6 Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /

İçindekiler: “…Design of Low Composites from Recycled Aluminium-Copper +Aluminium Chips for Tribological Applications -- Chap13. …”
Full-text access

Mechanics of Composite and Multi-functional Materials, Volume 7 Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics  /

İçindekiler: “…1 Mechanical and Tribological Properties of Scrap Rubber Reinforced with Al2O3 Fiber and TiO2 -- 2 Investigating Hemp Concrete Mechanical Properties Variability Due To Hemp Particles -- 3 Recycling of Scrap Aluminium (AA7075) Chips for Low Cost Composites -- 4 Scrap Rubber Based Composites Reinforced with Ceramic Oxides and Silica -- 5 Mechanical and Tribological Properties of Scrap Rubber Reinforced with Al2O3 Fiber, Aluminium and TiO2 -- 6 Thermo mechanical Investigation of Fused Deposition Modeling by Computational and Experimental Methods -- 7 Non Linear Contact Analysis of Self Supporting Lattice -- 8 Process Parameter Effects on Interlaminar Fracture Toughness of FDM Printed Coupons -- 9 Constitutive Equations for Severe Plastic Deformation Processes -- 10 Merging Experimental Evidence and Molecular Dynamics Theory to Develop Efficient Models of Solids Fracture -- 11 Comparison of Patch and Fully Encircled Bonded Composite Repair -- 12 Comparison of Composite Repair Performance on Drilled and Simulated Defects -- 13 Measuring how Overlap Affects the Strength of Composite Tubes in Bending Torsion -- 14 Thermal Cycling and Environmental Effect on Tensile Impact Behavior of Adhesive Single lap Joints for Fiber Metal Laminate -- 15 Design of Hybrid Composites from Scrap Aluminum Bronze Chips -- 16 Impact Response of Waste Poly Ethylene Terephthalate (PET) Composite Plate -- 17 Particles Reinforced Scrap Aluminum Based Composites by Combined Processing Sintering + Thixoforging -- 18 Recycle of Aluminium (A356) for Processing of New Composites Reinforced with Magnetic Nano Iron Oxide and Molybdenum -- 19 A New Multiscale Bioinspired Compliant Sensor -- 20 Effect of Microstructure on Mechanical Response of MAX Phases -- 21 Controlled Placement of Microcapsules in Polymeric Materials -- 22 Converse Magneto electric Coefficient of Composite Multiferroic Rings -- 23 In situ Sensing of Deformation and Damage in Nanocomposite Bonded Surrogate Energetic Materials -- 24 Quasi Static Characterization of Self Healing Dental Composites -- 25 Load Monitoring Using Surface Response to Excitation Method -- 26 Elevated Temperature Digital Image Correlation Using High Magnification Optical Microscopy -- 27 Design of Hybrid Composites from Scrap Aluminum Reinforced with (SiC+TiO2+Gr+Ti+B) -- 28 Manufacturing of Low Cost Composites with Porous Structures from Scrap Aluminium (AA2014) Chips -- 29 Development of Functionally Graded Nodular Cast Iron Reinforced with Recycled WC Particles -- 30 Aluminium Matrix Composites Reinforced by Nano Fe3O4 doped with TiO2 by Thermomechanical Process -- 31 Implementation of the Surface Response to Excitation Method for pipes -- 32 Thermal Methods for Evaluating Flows in Composite Materials A new Approach to Data Analysis -- 33 Characterising the Infrared Signature of Damaged Composites for Test Control -- 34 Thermoelastic Stress Analysis and Digital Image Correlation to Assess Composites -- 35 A Study on Mechanical Properties of Raw Sisal Polyester Composites -- 36 HPHT In Situ Strain Measurement of Polymer Composites for Oilfield Applications -- 37 Evaluation of Viscoelastic Characteristics of Polymer by Using Indentation Method.…”
Full-text access

Printed Flexible Sensors Fabrication, Characterization and Implementation / Yazar: Nag, Anindya, Mukhopadhyay, Subhas Chandra, Kosel, Jurgen

İçindekiler: “…Introduction -- Literature review -- Interdigitated Sensing and Electrochemical Impedance Spectroscopy -- Carbon Nanotubes-Polydimethylsiloxane Sensor -- Aluminium-Polyethylene Terephthalate Sensor -- Graphite-Polyimide Sensor -- Graphite-Polydimethylsiloxane Sensor -- Conclusion, Challenges and Future Work.…”
Full-text access

Development of an Ultrasonic Sensing Technique to Measure Lubricant Viscosity in Engine Journal Bearing In-Situ Yazar: Schirru, Michele

İçindekiler: “…Introduction -- Background on Viscosity and Lubrication -- Background on Ultrasound -- Literature review -- A Novel Ultrasonic Model for Non-Newtonian Fluids -- Viscosity Measurement at an Aluminium-Oil Boundary -- The Matching Layer Method -- Viscosity Measurement in a Journal Bearing -- Conclusions.…”
Full-text access

Progress in Engineering Technology Automotive, Energy Generation, Quality Control and Efficiency /

İçindekiler: “…Study the Effect of Acetone as an Inhibitor for the Performance of Aluminium-Air Batteries -- 2. Performance Characteristics of Palm Oil Diesel Blends in a Diesel Engine -- 3. …”
Full-text access

Light Metals 2019

İçindekiler: “…Cast Shop Technology -- Root Cause Analysis Findings of a Force 3 Explosion -- Condensation Warning System for Dry Material Storage -- A New Aluminium Crucible Skimmer (ACS) for Smelter Plants - Main Benefits Further to Two Years of Experimentation in Industrial Environment -- Drive-in Feeding of Crucibles for Casting Machine -- In-line Salt Fluxing Process with an FFDTM Industrial Experience with a Box-Type Degasser -- The "Alcoa Filter System": A Cost Effective Solution for Enhanced CFF Performance -- Continuous Centrifugal Casting: A Revolutionary Process for Casting Aluminium Tubes -- Development of a Prototype Unit for Continuous Centrifugal Casting of Aluminium Tubes -- Constellium's R&D on the Use of Power Ultrasound in Liquid Aluminum: An Overview -- Molten Metal Cleanliness: Recent Developments to Improve Measurement Reliability -- On-site Benchmark of LiMCA II vs. …”
Full-text access

Light Metals 2018

İçindekiler: “…Cast Shop Technology -- Root Cause Analysis Findings of a Force 3 Explosion -- Condensation Warning System for Dry Material Storage -- A New Aluminium Crucible Skimmer (ACS) for Smelter Plants - Main Benefits Further to Two Years of Experimentation in Industrial Environment -- Drive-in Feeding of Crucibles for Casting Machine -- In-line Salt Fluxing Process with an FFDTM Industrial Experience with a Box-Type Degasser -- The "Alcoa Filter System": A Cost Effective Solution for Enhanced CFF Performance -- Continuous Centrifugal Casting: A Revolutionary Process for Casting Aluminium Tubes -- Development of a Prototype Unit for Continuous Centrifugal Casting of Aluminium Tubes -- Constellium's R&D on the Use of Power Ultrasound in Liquid Aluminum: An Overview -- Molten Metal Cleanliness: Recent Developments to Improve Measurement Reliability -- On-site Benchmark of LiMCA II vs. …”
Full-text access

Mechanics of Composite and Multi-functional Materials, Volume 7 Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /

İçindekiler: “…From the Contents: Mechanics of Multifunctional Wings With Solar Cells for Robotic Birds -- Optimization of Magnetic and Electrical Properties of New Aluminium Matrix Composite Reinforced With Magnetic Nano Iron Oxide (Fe3O4) -- Manufacturing and Characterization of Non-Isotropic Membranes for Micro Air Vehicles -- Compliant Artificial Skins to Enable Robotic Sensing and Training by Touch -- Electrical Impedance Spectroscopy for Structural Health Monitoring -- Soliton-based Sensor/Actuator for Delamination and Weak Bond Detection in Laminated Composites.…”
Full-text access

Manufacturing Engineering Select Proceedings of CPIE 2018 /

İçindekiler: “…-Friction stir welding of shipbuilding grade DH36 steel -- Experimental investigation on the effect of cryogenic co2 cooling in end milling of aluminium alloy -- Transient thermal analysis of CO2 laser welding of AISI 304 stainless steel thin plates -- Transient Thermal Analysis On Friction Stir Welding Of AA6061 -- Recycling Of H30 Aluminium Alloy Swarfs Through Gravity Die Casting Process -- Effect on Mechanical and Metallurgical Property of Cryogenic Treated Material SS316 -- Microstructure And Mechanical Properties Of Lamellar TI-6AL-4V Eli Alloy -- Influence Of Process Parameters On Surface Roughness Hole Diameter Error And Burr Height In Drilling Of 304l Stainless Steel -- Investigation Of Impression Creep Deformation Behaviour Of Boron Modified P91 Steel By High End Characterization Techniques -- Tribological and Machining Performance of Graphite, CaF2 and MoS2 Coated Mechanical Micro-Textured Self-Lubricating Cutting Tool -- Chemical Assisted USM Of Acrylic Heat Resistant (BS-476) Glass -- Study Of Temperature Distribution During Fsw Of Aviation Grade AA6082.…”
Full-text access

Friction Stir Welding and Processing X

İçindekiler: “…Part 1: High Temperature Applications I -- Effect of Thermal Aging on the Corrosion and Mechanical Properties of Friction Stir Welded 250 Grade Maraging Steel -- Friction Stir Processing of 304L Stainless Steel for Crack Repair -- Influence of underwater operation on friction stir welding of medium carbon steel -- Feasibility of iridium containing nickel base superalloy tool to friction stir Spot welding of High Strength Steel -- Part 2: High Temperature Applications II -- Development of Friction Stir Processing for Repair of Nuclear Dry Cask Storage System Canisters -- Performance of tungsten-based alloy tool developed for friction stir welding of austenitic stainless steel -- Investigation of Process Parameters for Friction Stir Processing (FSP) of Ti-6Al-4V Alloy -- Part 3: Derivative Technologies -- Solid-State Joining of Thick-Section Dissimilar Materials using a New Friction Stir Dovetailing (FSD) Process -- Joining aerospace aluminum 2024-T4 to titanium by Friction Stir Extrusion -- Dissimilar Metal T-Joint Formed by Friction Stir Extrusion -- Part 4: Lightweight Applications -- Friction Stir Welding of Thick Section Aluminium Alloys - New Techniques -- Friction Stir Weld lap joint properties in aeronautic aluminum alloys -- Friction stir welding of thick aluminium welds - challenges and perspectives -- High-speed FSW aluminum alloy 7075 microstructure and corrosion properties -- Flow Features in Shoulder Zone during Scroll Tool Friction Stir Welding Thick 6061 Aluminum Plates -- Part 5: Dissimilar Applications -- Joining dissimilar material using Friction Stir scribe technique -- Influence of stir flow on joint quality during friction stir lap Al-to-Cu welding -- A Numerical Simulation for Dissimilar Aluminum Alloys Joined by Friction Stir Welding -- Realization of Ultrasound Enhanced Friction Stir Welded (USE-FSW) Al/Mg- and Al/Steel-Joints: Process and Robustness, Mechanical and Corrosive Properties -- Part 6: Industrial Applications -- Friction Stir Welding Parameter Developmentof AA7075 for Hot Stamping Applications -- A novel approach for joining EN AW 1050 stranded wire and EN CW 004A contact elements by Friction Stir Spot Bonding -- Joining Al 6061 to ZE41A Mg Alloy by Friction Stir Welding Using a Cold Spray Transition Joint -- Refill Friction Stir Spot Welding Aerospace Aluminum Alloys -- Part 7: Control and Simulation -- Depth and temperature control during friction stir welding of 5 cm thick copper canisters -- Predicting Lap Shear Strength for Friction Stir Scribe Joining of Dissimilar Materials -- Simultaneous Independent Control of Tool Axial Force and Temperature in Friction Stir Processing -- Process force reduction during robotic Friction Stir Welding of aluminium alloys with reduced tool aspect ratios -- Part 8: Poster Session -- Friction stir processing of 2507 super duplex stainless steel: microstructure and corrosion behavior -- Effect of Heat Treatment on Friction-stir-processed Nanodispersed AA7075 and 2024 Al Alloys -- Numerical Analysis of FSW Employing Discrete Element Method.…”
Full-text access

Friction Stir Welding and Processing IX

İçindekiler: “…Part 1: High Temperature Applications I -- Effect of Thermal Aging on the Corrosion and Mechanical Properties of Friction Stir Welded 250 Grade Maraging Steel -- Friction Stir Processing of 304L Stainless Steel for Crack Repair -- Influence of underwater operation on friction stir welding of medium carbon steel -- Feasibility of iridium containing nickel base superalloy tool to friction stir Spot welding of High Strength Steel -- Part 2: High Temperature Applications II -- Development of Friction Stir Processing for Repair of Nuclear Dry Cask Storage System Canisters -- Performance of tungsten-based alloy tool developed for friction stir welding of austenitic stainless steel -- Investigation of Process Parameters for Friction Stir Processing (FSP) of Ti-6Al-4V Alloy -- Part 3: Derivative Technologies -- Solid-State Joining of Thick-Section Dissimilar Materials using a New Friction Stir Dovetailing (FSD) Process -- Joining aerospace aluminum 2024-T4 to titanium by Friction Stir Extrusion -- Dissimilar Metal T-Joint Formed by Friction Stir Extrusion -- Part 4: Lightweight Applications -- Friction Stir Welding of Thick Section Aluminium Alloys - New Techniques -- Friction Stir Weld lap joint properties in aeronautic aluminum alloys -- Friction stir welding of thick aluminium welds - challenges and perspectives -- High-speed FSW aluminum alloy 7075 microstructure and corrosion properties -- Flow Features in Shoulder Zone during Scroll Tool Friction Stir Welding Thick 6061 Aluminum Plates -- Part 5: Dissimilar Applications -- Joining dissimilar material using Friction Stir scribe technique -- Influence of stir flow on joint quality during friction stir lap Al-to-Cu welding -- A Numerical Simulation for Dissimilar Aluminum Alloys Joined by Friction Stir Welding -- Realization of Ultrasound Enhanced Friction Stir Welded (USE-FSW) Al/Mg- and Al/Steel-Joints: Process and Robustness, Mechanical and Corrosive Properties -- Part 6: Industrial Applications -- Friction Stir Welding Parameter Developmentof AA7075 for Hot Stamping Applications -- A novel approach for joining EN AW 1050 stranded wire and EN CW 004A contact elements by Friction Stir Spot Bonding -- Joining Al 6061 to ZE41A Mg Alloy by Friction Stir Welding Using a Cold Spray Transition Joint -- Refill Friction Stir Spot Welding Aerospace Aluminum Alloys -- Part 7: Control and Simulation -- Depth and temperature control during friction stir welding of 5 cm thick copper canisters -- Predicting Lap Shear Strength for Friction Stir Scribe Joining of Dissimilar Materials -- Simultaneous Independent Control of Tool Axial Force and Temperature in Friction Stir Processing -- Process force reduction during robotic Friction Stir Welding of aluminium alloys with reduced tool aspect ratios -- Part 8: Poster Session -- Friction stir processing of 2507 super duplex stainless steel: microstructure and corrosion behavior -- Effect of Heat Treatment on Friction-stir-processed Nanodispersed AA7075 and 2024 Al Alloys -- Numerical Analysis of FSW Employing Discrete Element Method.…”
Full-text access

Non-traditional Micromachining Processes Fundamentals and Applications /

İçindekiler: “…Non-traditional micromachining processes: opportunities and challeges -- Electrical discharge micro-hole drilling process employing additive mixed dielectrics -- Tool wear compensation in micro EDM -- Advances on ultrasonic micro machining (USMM) process -- Electrochemical discharge micro-machining of engineering materials -- Electrochemical micromachining (EMM) -- Electrochemical micromachining of titanium and its alloys -- Laser micro-turning process of aluminium oxide ceramic using pulsed Nd:YAG laser -- Fiber Laser Micro-Machining of Engineering Materials -- Laser beam micro cutting -- Underwater laser microchanneling.…”
Full-text access

Advances in Manufacturing Technology Select Proceedings of ICAMT 2018 /

İçindekiler: “…-Finite Element Modeling Of Single Spark Material Removal and Heat Flux Distribution in Micro Electro Discharge Machining Process -- Electrochemical Micromachining of Aluminium Alloy Composite -- Analysis on Mechanical Behavior of Binary and Hybrid Al 2014 Metal Matrix Composites -- Study of Forces, Surface Finish and Tool Life on Machining Of Inconel 718.…”
Full-text access

Light Weighting for Defense, Aerospace, and Transportation

İçindekiler: “…Chapter 1: Opportunities For Lighter Weight And Lower Total Cost Component Manufacturing -- Chapter 2: Lightweighting and the Future of Aerospace Metals -- Chapter 3: Exploring the Trends, Opportunities and Aluminum Solutions Behind Automotive Material Innovation -- Chapter 4: The role of Materials Engineer in the product cycle- A new Outlook -- Chapter 5: Light-Weighting In Transportation And Defense Using Aluminium Foam Sandwich Structures -- Chapter 6: Innovations In Materials & Engineering For Light-Weighting Aircraft -- Chapter 7: Trends In Automotive Light Weighting -- Chapter 8: Advances in Test Techniques to Characterize Fatigue and Fracture Properties for Safety Critical Applications.…”
Full-text access