Search Results - "five part"

Nietzsche and transhumanism : precursor or enemy? /

Table of Contents: “…Introduction; Part I; Chapter One; Chapter Two; Chapter Three; Chapter Four; Chapter Five; Part II; Chapter Six; Chapter Seven; Chapter Eight; Chapter Nine; Part III; Chapter Ten; Chapter Eleven; Chapter Twelve; Chapter Thirteen; Chapter Fourteen; Chapter Fifteen; Contributors; Bibliography…”
Full-text access

Handbook of troubleshooting plastics processes : a practical guide /

Table of Contents: “…Chapter 6: Troubleshooting for Injection Molding6.1 Introduction; 6.2 Understanding Temperature Control; 6.3 Product Shift to a Different Machine; 6.4 Part Weight as an Analytical Tool; 6.5 Part Weight as Dimensional Aimpoint Control; 6.6 Determining the Gate Freeze-Off Time; References; Chapter 7: Blown Film; 7.1 Introduction; 7.2 Process Description; 7.3 Special Tools for Troubleshooting; 7.4 Case Studies; References; Chapter 8: Cast Film Troubleshooting; 8.1 Coextrusion Film Systems; 8.2 Troubleshooting Method; 8.3 Common Problems, Hypotheses and Tests; References…”
Full-text access

Characterization of Minerals, Metals, and Materials 2017

Table of Contents: “…Part 1: Soft Materials -- Charpy Toughness Behavior of Fique Fabric Reinforced Polyester Matrix Composites -- Comparative Analysis of Curaua Fiber Density Using the Geometric Characterization and Pycnometry Technique -- Izod impact tests in polyester matrix composites reinforced with blanket of the malva and jute fibers -- Tensile Behavior of Epoxy Matrix Composites Reinforced With Eucalyptus Fibers -- The dimensional characterization of jute fabric strips for reinforcement in composite polymeric -- Izod Toughness Behavior of Continuous PALF Fibers Reinforced Polyester Matrix Composites -- Mechanical, thermal, morphology and barrier properties of flexible film based on polyethylene-ethylene vinyl alcohol blend reinforced with graphene oxide -- Radiation Effects on Crosslinking of Butyl Rubber Compounds -- Part 2: Clays and Ceramics -- Effect of Skin-Core Hierarchical Structure on Dielectric Constant of Injection Molded and Cast Film Extruded Liquid Crystalline Polymer -- Aging behaviour in Ni0.5CoxMn2.5-xO4 (x=0.5, 0.8 and 1.1) thermistors -- Adsorption of lead from aqueous solutions to bentonite and composite -- Part 3: Electronic, Magnetic, Environmental, and Advanced Materials -- Characterization Of Low-Zinc Electric Arc Furnace Dust -- GAMMA-RADIATION EFFECT ON BIODEGRADABILITY OF SYNTHETIC PLA STRUCTURAL FOAMS PP/HMSPP BASED -- STUDY OF FLEXIBLE FILMS PREPARED FROM PLA/PBAT BLEND AND PLA e-BEAM IRRADIATED AS COMPATIBILIZING AGENT -- Synthesis of ZnO Micro Prisms on Glass Substrates by the Spray Pyrolysis Method -- Part 4: Nano Materials -- Electrical and microstructural investigation of Ni0.5Co0.5Cu0.3Zn0.3Mn1.4O4 temperature sensors -- Enhanced physical properties of thin film nanocomposites -- A study on the size and type of inclusions in Si-Mn combined deoxidated low carbon steel strip -- Effect of Argon Gas Purging of Spark Plasma Sintered ZrB2+SiC Nano-powder Composites -- Part 5: Alloys -- Investigating the Anisotropic Behaviour of Lean Duplex Stainless Steel 2101 -- MICROSTRUCTUAL INVESTIGATION AND IMPACT TESTING OF ADDITIVE MANUFACTURED TI-6AL-4V -- Part 6: Powders and Foams -- SYNTHESIS OF TiN NANO-COMPOSITE POWDER BY HIGH-ENERGY BALL MILLING OF TiH2 UNDER NITROGEN ATMOSPHERE -- Application of AFM in Morphology Determination of Powder Material -- Effects of Thermal Processing on Closed-Cell Aluminium Foams -- Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams under Drop Weight Impact -- Deformation Mechanisms of Closed Cell-Aluminium Foams during Drop Weight Impact -- Part 7: Minerals -- INDUSTRIAL USE OF BRAZILIAN BENTONITE MODIFIED BY MILD ACID ATTACK -- Mullitization Characteristics and Sinterability of Kyanite in Ceramic Preparation -- Ore Dressing and Technological characterization of Palygorskite from Piauí/Brazil for applications as adsorbent of heavy metals -- TECHNOLOGICAL CHARACTERIZATION OF WASTE FROM GOLD MINING DAM -- Synthesis and Characterization of Sodalite and Cancrinita from Kaolin -- Part 8: Ferrous Metals -- Effects of Alumina and Magnesia on Microstructure and Mineralogy of Iron Ore Sinter -- Isothermal Reduction Kinetics of CaO·2Fe2O3 by Thermogravimetric Analysis -- Phase Transformation of MnO2 and Fe2O3 Briquettes Roasted Under CO-CO2 Atmospheres -- Contact Angle of Iron Ore Particles with Water: Measurements and Influencing Factors -- Important Factors to Consider in FIB Milling of Crystalline Materials -- Part 9: Material Processing and Corrosion -- Corrosion Behavior of Super-Ferritic Stainless Steels in NaCl media -- Effect of bromide ions on the pitting corrosion of hafnium in anhydrous t-butanol and acetonitrile -- Compression Behavior of Semi-Closed Die Forged AZ80 Extrusion -- Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique -- Part 10: Method Development -- Development of A New Recycling Process of PGM from Metal-supported Catalyst Using Complex Oxide -- Part 11: Composites -- High thermal conducting composites using percolation theory -- SORPTION CHARACTERISTICS OF LOW DENSITY POLYETHYLENE/KOLA NUT COMPOSITE -- Residual Stress Analysis within Steel Encapsulated Metal Matrix Composites Via Neutron Diffraction -- Tensile Behavior of Epoxy Matrix Composites Reinforced With Pure Ramie Fabric -- Hemp Fiber Density Using the Pycnometer Technique -- Preparation and Characterization of Clay Exfoliation and Vegetal fibre on Properties of Recycled Low Density Polyethylene (rLDPE) -- Part 12: Ferrous Metals -- Estimation of Dislocation Density in Metals from Microhardness Test -- Part 13: Welding and Solidification -- Interfacial strength characterization in a high-modulus low-density steel-based Fe-TiB2 composite -- Part 14: Materials Extractions -- Leaching of Copper-Cobalt Tailings from the Democratic Republic of Congo -- OPTIMUM OPERATING CONDITIONS FOR EXTRACTION OF LIGNIN PRECURSORS FROM PALM FRUIT BUNCH -- SELECTION ON THE PROCESS FOR ENRICHING GOLD FROM REFRACTORY GOLD ORES BY SMELTING -- SELECTION ON THE PROCESS FOR REMOVING AND RECOVERING ANTIMONY FROM ANTIMONIAL REFRACTORY GOLD ORES -- Upgrading of Copper and Cobalt from the Democratic Republic of Congo Tailings -- CHARACTERIZATION OF SPENT PRINTED CIRCUIT BOARDS FROM COMPUTERS -- Study of the Effect of the Initial Nucleation Mechanism of Lead Anode Oxidation Film on Internal Stress in Chromic Acid Electrolyte -- Part 15: Poster Session -- Addition of Cellulose Nanofibers in Reactive Powder Concrete -- ADVANCED ION COLUMN SOLUTION FOR LOW ION DAMAGE CHARACTERIZATION AND ULTRA-FINE PROCESS -- Application of Membrane Separation Technology in Wastewater Treatment of Iron and Steel Enterprise -- Brillouin Scattering Study on Elastic Properties of Bulk hcp ZnO Single Crystal -- Characteristics of stamp charging coke and top charging coke -- Characterization and leaching proposal of Ag ( I) from a Zn concentrate -- Characterization and Mechanical Properties of Additively Manufactured Stainless Steel 316L -- CHARACTERIZATION OF MERCURY JAROSITE -- Characterization of steel production dust and their use in structural ceramics -- CHARPY TOUGHNESS BEHAVIOR OF JUTE FABRIC REINFORCED POLYESTER MATRIX COMPOSITES -- Chemical and Mineralogical Characterization of a Mixed Sulphide Ore at Zimapan, Hidalgo -- Contribution to the ß relaxation study of the HDPE, LDPE and LLDPE -- Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES -- Effects of wet grinding on the structure and granularity of biological origin aragonite and its polymorphic transformation into calcite -- EVALUATION OF BALLISTIC ARMOR BEHAVIOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS -- EVALUATION OF THE POZZOLANIC ACTIVITY OF RESIDUE FROM THE PAPER INDUSTRY -- EVALUATION OF THE PROPERTIES OF THE ADHESIVE MORTAR IN THE FRESH STATE WITH ADDITION OF GLASS WASTE -- Experimental Evaluation of the Influence of Mortar's Mechanical Properties on The Behavior of Clay Masonry -- Influence of Operation Conditions on Normal Stress and Flow Pattern of Burden Materials in Blast Furnace Based on Discrete Element Method -- Polymer Blend based on recycled polyethylene and ethylene vinyl acetate copolymers reinforced with natural fibers from agricultural wastes -- Preliminary study of the effect of stirring rate, temperature and oxygen pressure on the leach rate of copper powder, generated by grinding of printed circuit boards of computer -- Preparation and Characterization of Polyethylene Nanocomposites with Clay and Silver Nanoparticles -- Production of concrete interlocking blocks with partial replacement of sand in bulk by waste glass machined -- Reactive Powder Concrete Production with the Addition of Granite Processing Waste -- Research on the reason of the different type of chloride forming in the process of blast furnace ironmaking -- Stress and Deformation Analysis of Hot Blast Stove Piping System -- Stress and Deformation Analysis of Top Combustion Hot Blast Stove Shell -- STUDY OF CALCINED MIXTURES FROM INDUSTRIAL RESIDUES FOR PRODUCTION OF AGGLOMERATES.…”
Full-text access

Intelligent Manufacturing & Mechatronics Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia /

Full-text access

Introduction to Multicopter Design and Control by Quan, Quan

Full-text access

Life Cycle Assessment Theory and Practice /

Full-text access

CONTROLO 2016 Proceedings of the 12th Portuguese Conference on Automatic Control /

Full-text access

Multimedia and Network Information Systems Proceedings of the 10th International Conference MISSI 2016 /

Full-text access

The Statistical Stability Phenomenon by Gorban, Igor I.

Full-text access

Randomness and Hyper-randomness by Gorban, Igor I.

Full-text access

Machine Learning Paradigms Advances in Data Analytics /

Full-text access

Robot Operating System (ROS) The Complete Reference (Volume 3) /

Full-text access

Dynamic Response of Infrastructure to Environmentally Induced Loads Analysis, Measurements, Testing, and Design /

Full-text access

Formal Verification of Floating-Point Hardware Design A Mathematical Approach / by Russinoff, David M.

Full-text access

Micro and Nano Fabrication Technology

Full-text access

Error-Correction Coding and Decoding Bounds, Codes, Decoders, Analysis and Applications / by Tomlinson, Martin, Tjhai, Cen Jung, Ambroze, Marcel A., Ahmed, Mohammed, Jibril, Mubarak

Full-text access

Thermal Processing of Packaged Foods by Holdsworth, S. Donald, Simpson, Ricardo

Full-text access