Arama Sonuçları - "nanomechanics"

Nanotribology and Nanomechanics An Introduction /

İçindekiler: “…Scanning Probe Microscopy: Scanning Probe Microscopy - Principle of Operation, Instrumentation and Probes -- Calibration of Normal and Lateral Forces in Cantilevers used in Atomic Force Microscopy -- Biomedical Sensing with the Atomic Force Microscope -- Part II. Nanomechanics: Nanomechanical Properties of Solid Surfaces and Thin Films -- Nanomechanical Properties of Nanostructures and Scale Effects -- Computer Simulations of Nanometer-Scale Indentation and Friction -- Part III. …”
Full-text access
OPAC'ta görüntüle

Fundamentals of Nanomechanical Resonators Yazar: Schmid, Silvan, Villanueva, Luis Guillermo, Roukes, Michael Lee

Full-text access
OPAC'ta görüntüle

Introduction to micromechanics and nanomechanics / Yazar: Li, Shaofan

OPAC'ta görüntüle

Micromechanics and Nanomechanics of Composite Solids

Full-text access
OPAC'ta görüntüle

Multiscale Materials Modeling for Nanomechanics

İçindekiler: “…Kinetic Monte Carlo Modeling of Nanomechanics in Amorphous Systems -- 15. Nanomechanics of Ferroelectric Thin Films and Heterostructures -- 16. …”
Full-text access
OPAC'ta görüntüle

Micro and Nanomechanics, Volume 5 Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics  /

Full-text access
OPAC'ta görüntüle

Micro and Nanomechanics, Volume 5 Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /

İçindekiler: “…Chap1. Nanomechanics Instabilities and TeraHertz Vibrations: From Geochemical Evolution to Fracto-Emission Seismic Precursors -- Chap2. …”
Full-text access
OPAC'ta görüntüle

Nanomechanics of Graphene and Design of Graphene Composites Yazar: Liu, Xiaoyi

Full-text access
OPAC'ta görüntüle

Mechanics of Biological Systems & Micro-and Nanomechanics, Volume 4 Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /

Full-text access
OPAC'ta görüntüle

Springer Handbook of Nanotechnology

İçindekiler: “…Introduction -- Micro/Nanofabrication Techniques -- Nanomaterials and Nanostructures -- MEMS/NEMS -- BioMEMS/NEMS -- Nanometrology -- Bio/Nanotribology and Bio/Nanomechanics -- Molecularly-Thick Films for Lubrication -- Biomimetics and Bioinspired Surfaces -- Micro/Nanodevice Reliability -- Nanotechnology in Social Context, Environments, Health and Safety Issues, and Nanotechnology Education.…”
Full-text access
OPAC'ta görüntüle

Computational Continuum Mechanics of Nanoscopic Structures Nonlocal Elasticity Approaches / Yazar: Ghavanloo, Esmaeal, Rafii-Tabar, Hashem, Fazelzadeh, Seyed Ahmad

İçindekiler: “…From the content: Fundamental tenets of nanomechanics -- Fundamental notions from classical continuum mechanics -- Essential concepts from nonlocal elasticity theory -- Nonlocal modelling of nanoscopic structures -- Elastic properties of carbon-based nanoscopic structures.…”
Full-text access
OPAC'ta görüntüle

Introduction to Mechanical Engineering

İçindekiler: “…Studying mechanical engineering -- Materials and manufacturing processes -- Machining and machine tools -- Tribology and surface engineering -- Solid mechanics -- Applied and computational mechanics -- Mechanical design -- Mechatronics and robotics -- Fluid mechanics and heat transfer -- Renewable energies -- Biomechanics -- Nanoengineering and nanomechanics.…”
Full-text access
OPAC'ta görüntüle

MEMS and Nanotechnology, Volume 5 Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /

İçindekiler: “…From the Contents: Oxide Driven Strength Degradation of (1 1 1) Silicon Surfaces -- Keynote: In situ TEM Nanomechanical Testing -- Poisson's Ratio as a Damage Index Sensed By Dual-embedded Fiber Bragg Grating Sensor -- In Situ High-Rate Mechanical Testing in the Dynamic Transmission Electron Microscope.…”
Full-text access
OPAC'ta görüntüle

Structure and Multiscale Mechanics of Carbon Nanomaterials

İçindekiler: “…Carbon fibers: local structure and nanomechanical properties from X-ray diffraction -- Carbon fibers and -composites: the Raman G-band as a local stress-sensor -- Carbon nanotubes under shear -- Carbon nanotubes under pressure -- Atomistic and continuum modeling of graphene and graphen-derived carbon nanomaterials -- Continuum  modeling collapse of carbon nanotubes -- Deformation of vertically aligned carbon nanotube forest -- Graphene and graphene composites.…”
Full-text access
OPAC'ta görüntüle

Handbook of Mechanics of Materials

İçindekiler: “…Dislocation nucleation mediated plasticity of FCC nanowires -- Indentation behaviour of metallic glass via molecular dynamics simulation -- Surface/Interface Stress and Thin Film Stress -- On the vibratory probing of atomic force microscopy -- Characterization of mechanical properties in polymeric materials: A bottom-up approach -- Fracture nanomechanics -- In situ Transmission Electron Microscopy Investigation of Dislocation Interactions -- Multiscale Modeling of Radiation Hardening -- Atomistic simulations of Metal/Al2O3 interfaces -- Multiscale simulation of precipitation in copper-alloyed pipeline steels and in Cu-Ni-Si alloys -- Atomistic simulations of hydrogen effects on lattice defects in alpha iron -- Molecular Dynamics Simulations of Nanopolycrystals.…”
Full-text access
OPAC'ta görüntüle

Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics

İçindekiler: “…Influence of Sample Preparation on Determined Nanomechanical Properties of Metastable Calcium Carbonate Polymorphs -- Crystallization and Dissolution of Common Salts - Damage Potential to Porous Media -- Torsional shear testing of mortar -- Comparative tests of strengthening effects on weak mortars consolidated with various agents -- Novel Device for 4-point Flexural Testing of Quasi-brittle Materials during 4D Computed Tomography -- Effects of Long-term Aging on the Low-cycle Fatigue Behavior of Inconel 718 superalloy -- Enhanced Young's modulus in percolative cementitious composites reinforced with carbon nanotubes -- Behavior of Partially and Fully FRP-Confined Circularized Square Columns (CSCs) under Axial Compression -- Stress-Strain Behavior of Circular Concrete Columns Partially Wrapped with FRP Strips -- Improving the Tribological Properties of Ti6Al4V Alloy with Multi-Walled Carbon Nanotube Additions.…”
Full-text access
OPAC'ta görüntüle

Integrated Nanoelectronics Nanoscale CMOS, Post-CMOS and Allied Nanotechnologies / Yazar: Khanna, Vinod Kumar

Full-text access
OPAC'ta görüntüle

Dynamic Stability and Bifurcation in Nonconservative Mechanics

Full-text access
OPAC'ta görüntüle

Fracture, Fatigue, Failure and Damage Evolution, Volume 7 Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /

İçindekiler: “…Chapter 1.Interface Mechanical Strength and Elastic Constants Calculations via Nano Impact and Nanomechanical Raman Spectroscopy -- Chapter 2.Effect of Strain Rate and Interface Chemistry on Failure in Energetic Material -- Chapter 3.Characterization of Crack Tip Plasticity in IN-617 Using Indentation and Nano-mechanical Raman Spectroscopy -- Chapter 4.The Two-Way Relationship between Residual Stress and Fatigue/Fracture -- Chapter 5.Designing Brittle Fracture Specimens to Investigate Environmentally Assisted Crack Growth -- Chapter 6.Flexible Energy Harvesting/Storage Structures for Flapping Wing Air Vehicles -- Chapter 7.The Influence of Formulation Variation and Thermal Boundary Conditions on the Near-Resonant Thermomechanics of Mock Explosives -- Chapter 8.Detecting Fatigue Crack Closure and Crack Growth Delays after an Overload Using DIC Measurements -- Chapter 9.In-situ Observation of Damage Evolution in Quasi-Isotropic CFRP Laminates -- Chapter 10.Contamination-induced Degradation/Enhancement of Interfacial Toughness and Strength in Polymer Matrix Composite Interfaces -- chapter 11.Simultaneous Extraction of Mixed-Mode Traction-Separation Relations -- Chapter 12.Damage Evolution in 304L Stainless Steel Partial Penetration Laser Welds -- Chapter 13.Cross-axis Coupling and Phase Angle Effects due to Multiaxial Vibration -- Chapter 14.Behavior of Steel-Concrete Composite Beams under Fatigue Loads -- Chapter 15.Studying the Fracture of Tropical Wood Species with the Grid Method -- Chapter 16.Generalization of Integral Parameters to Fatigue Loading in Room Temperature -- Chapter 17.Fracture Behavior of Unidirectional Composites Analyzed by Acoustic Emissions Technique.…”
Full-text access
OPAC'ta görüntüle

Challenges in Mechanics of Time Dependent Materials, Volume 2 Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics  /

İçindekiler: “…1 Cracking and Durability of Composites in a Marine Environment -- 2 Analyses of Nanoscale to Microscale Strength and Crack-tip Stresses Using Nanomechanical Raman Spectroscopy in In 617 -- 3 High Creep Resistance of Titanium Aluminides Sintered by SPS -- 4 An Investigation of the Temperature and Strain-Rate Effects on Strain-to-Failure of UHMWPE Fibers -- 5 Keynote Life Prediction of CFRP Laminates based on Accelerated Testing Methodology -- 6 Rate Dependent Interfacial Properties Using the JKR Experimental Technique -- 7 Bio-based Composites as Thermorheologically Complex Materials -- 8 Viscoelastic Properties of Longitudinal Waves in a Hollow Cylinder -- 9 Evaluation of Viscoelastic Characteristics Under High Strain Rate by Impact Test -- 10 Phase Changes in Embedded HMX in Response to Periodic Mechanical Excitation -- 11 Effect of Crystal Density on Dynamic Deformation Behavior of PBX -- 12 Strain Rate Dependent Failure of InterfacesExamined via Nanoimpact Experiments -- 13 A Theory of Coupled Anisothermal Chemomechanical Degradation for Finitely-deforming Composite Materials with Eshelbian Interactive Forces -- 14 Effect Of Temperature And Moisture on the Mechanical Properties of Fiber Reinforced Nylon 6 Composites -- 15 Using Hydrostatic Pressure to Maximize Frequency Dependent Damping Properties of Thermoplastic Polyurethane -- 16 Impact Of Hydro-Mechanical Loadings On Rupture Process In Wood Material -- 17 2D Transient Viscoplastic Model for Dislocation Generation of SiC by PVT Method -- 18 Temperature-Dependent Small Strain Plasticity Behavior of 304L Stainless Steel -- 19 Time and Temperature Creep Behaviour Measurement of Al and Al-Mg Alloy Thin Films Using Pressure Bulge Tests -- 20 Multifunctional Wings with Flexible Batteries and Solar Cells for Robotic Birds -- 21 Rate-Dependent Constitutive Model Development of PC/ABS Material -- 22 Comprehensive Viscoelastic Properties Characterization of EMC Using FBG Sensor -- 23 Back Stress in Modeling the Response of PEEK and PC -- 24 Dynamic Testing and Constitutive Modelling of NBR Rubbers -- 25 A New Temperature-dependent Storage Modulus Model of Epoxy Resin -- 26 Identification of Plastic Behaviour of Sheet Metals in High Strain Rate Tests -- 27 Characterization of Fiber Composites at Lower Strain Rates.…”
Full-text access
OPAC'ta görüntüle