Arama Sonuçları - (((( past to based materials. ) OR ( part to based materials. ))) OR ( last to based materials. ))*

Solid State Lighting Reliability Part 2 Components to Systems /

Full-text access
OPAC'ta görüntüle

International Congress on Polymers in Concrete (ICPIC 2018) Polymers for Resilient and Sustainable Concrete Infrastructure /

İçindekiler: “…-- Polymer Concrete for Bridge Preservation -- Feasibility Study of the Use of Polymer-Modified Cement Composites as 3D Concrete Printing Material -- Experimental Analysis and Micromechanics-Based Prediction of the Elastic and Creep Properties of Polymer-Modified Concrete at Early Ages -- Durability and Long-Term Performance of Fiber-Reinforced Polymer as a New Civil Engineering Material -- Nano-modified Polymer Concrete - A New Material for Smart and Resilient Structures -- Part II Polymer Materials -- Bio-Based Superplasticizers for Cement Based Materials -- Screening Encapsulated Polymeric Healing Agents for Carbonation Exposed Self-Healing Concrete, Service Life Extension and Environmental Benefit -- Synthesis and Characterization of Superabsorbent Polymer Hydrogels Used as Internal Curing Agents: Impact of Particle Shape on Mortar Compressive Strength -- Evaluation of Microencapsulated Corrosion Inhibitors in Reinforced Concrete -- The Use of Polymer Additions to Enhance the Performance of Industrial and Residential Decorative Concrete Flooring -- The Effect of Glucose on the Properties of Cement Paste -- Microstructured Polymers and Their Influences on the Mechanical Properties of PCC -- Stability of Latex in Cement Paste: Experimental Study and Theoretical Analysis -- Experimental Verification of Use Secondary Raw Materials as Fillers to Epoxy Polymer Concrete -- Effects of Anionic Asphalt Emulsion on Early Age Cement Hydration -- Polymer Solutions for Protection of Concrete Exposed to Strong Alkaline or Acid Effluent on Industrial Installations -- Lightweight Filled Epoxy Resins for Timber Restoration -- Effect of Methyl Methacrylate Monomer on Properties of Unsaturated Polyester Resin-Based Polymer Concrete -- Analysis of Mechanical Behavior and Durability of Coatingsfor Use as Flooring in the Petroleum Industry -- Evaluation of the Performance of Engineered Cementitious Composites (ECC) Produced from Local Materials -- Application of Phase Change Materials (PCM) in Concrete for Thermal Energy Storage -- Mortars with Phase Change Materials and Stone Waste to Improve Energy Efficiency in Buildings -- Physical and Mechanical Properties of Cement Mortars with Direct Incorporation of Phase Change Material -- Mechanical Performance of Fly Ash Geopolymeric Mortars Containing Phase Change Materials -- Part III Polymer Concrete -- Are Polymers Still Driving Forces in Concrete Technology? …”
Full-text access
OPAC'ta görüntüle

Recycled Aggregate Concrete Structures Yazar: Xiao, Jianzhuang

Full-text access
OPAC'ta görüntüle

Special education past, present, and future perspectives from the field /

Full-text access
OPAC'ta görüntüle

Bio-based Materials for Food Packaging Green and Sustainable Advanced Packaging Materials /

İçindekiler: “…Bio-based Materials: Past -to-Future -- Interaction Phenomena Between Packaging and Product -- Testing Methods for Packaging Materials -- Functionality and Properties of Bio-based Materials -- Potential Bio-based Edible Films, Foams and Hydrogels for Food Packaging -- Nanotechnology and Edible Films for Food Packaging Applications -- Bionanocomposites in Packaging: Business Model for Products' Commercialisation -- Environmental Friendly Biopolymers for Food Packaging: Starch, Protein and Poly-Lactic Acid (PLA) -- Biodegradable Smart Biopolymers for Food Packaging: Sustainable Approach Towards Green Environment -- Biopolymers, Nanocomposites and Environmental Protection-a far-Reaching Review -- Chitosan Based Edible Membranes for Food Packaging -- Chitosan Based Nanocomposites in Food Packaging -- Application of Nanocomposites in Packaging- a far-Reaching Review and a Vision for the Future.…”
Full-text access
OPAC'ta görüntüle

Handbook of Maleic Anhydride Based Materials Syntheses, Properties and Applications /

İçindekiler: “…Part I: Introduction: Progress in Maleic Anhydride Production -- Part II: Reactions and Derivatives: Reactions Involving Maleic Anhydride -- Vegetable Oil-Maleic Anhydride and Maleimide Derivatives: Syntheses and Properties -- Part III: Maleic Anhydride-derived Polymers: The Quintessential Alternating Copolymer Family: Alkyl Vinyl Ether co-Maleic Anhydride Copolymers -- Industrially Significant Copolymers Containing Maleic Anhydride -- Ring-Opening Metathesis Polymerization (ROMP) using Maleic Anhydride based Monomers -- Colloidal and Physicochemical Properties of Maleic Anhydride Based Polymers -- Part IV Applications: Maleic Anhydride Applications in Personal Care -- Application of Maleic Anhydride in Adhesives and Coatings -- Application of Maleic Anhydride based Materials. .…”
Full-text access
OPAC'ta görüntüle

Physics and Chemistry of Carbon-Based Materials Basics and Applications /

Full-text access
OPAC'ta görüntüle

Polyoxometalate-Based Assemblies and Functional Materials

Full-text access
OPAC'ta görüntüle

Bio-aggregates Based Building Materials State-of-the-Art Report of the RILEM Technical Committee 236-BBM /

İçindekiler: “…Effect of testing variables (method of production) -- 9.0 Introduction -- 9.1 Materials and methods -- 9.2 Results -- 9.3 Conclusion -- Acknowledgments -- References -- APPENDIX : Technical Commitee Report - Rilem TC 236 BBM - Bio based Building Materials - Round Robin test for hemp shiv Characterisation -- Round Robin Test For Hemp shiv Characterisation -- Part 1 : Evaluation Of Initial Water Content And Water Absorption -- 1 Introduction -- 2 Material -- 52% -- 18% -- 2.1 Microscopical description -- 3 Initial Water Content -- 3.1 Methods -- 3.2 Results -- 3.3 Concluding remarks on initial water content -- 4 Water Absorption -- 4.1 Description of the experimental methods -- 4.2 Results -- 4.3 Concluding remarks -- Summary of Findings -- Round Robin Test For Hemp shiv Characterisation -- Part 2: Bulk Density And Particle Size Distribution -- 5 Introduction -- 6 Material -- 52% -- 18% -- 7 Bulk Density -- 7.1 Methods -- 7.2 Results -- 7.3 Concluding remarks on bulk density -- 8 Particle Size Distribution -- 8.1 Sieving method -- 8.2 Image processing -- 8.3 Comparison between sieving and image analysis results -- 8.4 Concluding remarks on Particle Size Distribution -- Summary Of Findings -- Acknowledgements -- Round Robin Test For Hemp shiv Characterisation -- Part 3 : Thermal Conductivity -- 9 Introduction -- 10 Material -- 52% -- 18% -- 11 Thermal Conductivity -- 11.1 Experimental methods -- 11.2 Results -- 11.3 Concluding remarks -- Summary Of Findings -- Acknowledgements. .…”
Full-text access
OPAC'ta görüntüle

Sustainable Jute-Based Composite Materials Mechanical and Thermomechanical Behaviour / Yazar: Jabbar, Abdul

Full-text access
OPAC'ta görüntüle

Thermal Properties of Bio-based Polymers

Full-text access
OPAC'ta görüntüle

Strain-Hardening Cement-Based Composites SHCC4 /

İçindekiler: “…Leung -- Performance Enhancement of Concrete Structures through Multi-Scale Crack Control, by Gabriel Jen and Claudia Ostertag -- Strengthening and Repair with Carbon Concrete Composites - the First General Building Approval in Germany, by Silke Scheerer, Elisabeth Schütze and Manfred Curbach -- Performance of Fiber Reinforced Materials: Historic Perspective and Glance in the Future, by Surendra Shah and Yuan Gao,- Applications of SHCC in Japan - Tools and tips for promoting its use, by Keitetsu Rokugo -- Material Design of TRC and TRC Impact Resistance, by Alva Peled.- Part 1. …”
Full-text access
OPAC'ta görüntüle

Extraction 2018 Proceedings of the First Global Conference on Extractive Metallurgy /

Full-text access
OPAC'ta görüntüle

Essential Readings in Light Metals, Volume 2, Aluminum Reduction Technology

Full-text access
OPAC'ta görüntüle

8th International Symposium on High-Temperature Metallurgical Processing

İçindekiler: “…Part 1: Energy Efficient Clean Metallurgical Technology -- Flash Ironmaking from Magnetite Concentrate in a Laboratory Reactor: Experimental and CFD Work -- Synthesis of Chromite for Subsequent Carburization by Methane-hydrogen Gas Mixture -- Effects of Hydrogen-enriched Reduction on Metallurgical Properties of Iron-Bearing Burdens under BF Operation with Cog Injection -- Microwave-intensified Reduction of Biochar-containing Briquettes -- Refractory Challenges in Lead Recycling Furnaces -- Synthesis of Carbide Ceramics via Reduction of Adsorbed Anions on an Activated Carbon Matrix -- Part 2: Simulation of High Temperature Process -- A CFD Based Algorithm for Kinetics Analysis of the Reduction of Hematite Concentrate by H2+CO Mixtures in a Drop Tube Reactor -- A Continuous Dynamic Process Model to Design a Carbon Profile toward Yield Improvement -- Alloy Yield Prediction Model Based on the Data Analysis in EAF Steelmaking Process -- Analysis of Jet Behavior and Surface Fluctuations in the Meniscusof Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling -- CFD Study of Gas-liquid Phase Interaction Inside a Submerged Lance Smelting Furnace for Copper Smelting -- Debottlenecking High Temperature Metallurgical Plants through Modeling and Simulation -- Assessment of Slag Entrainment in a RH Degasser through Physical Modelling Using Circulating Fluids of Different Densities/Oil Systems for Simulating Steel Melt/Slag -- Part 3: Fundamental Research of Metallurgical Process -- Investigate on the Phase Composition of Vanadium Slag with High CaO Content and Influence of P2O5 on Crystallization Kinetics of Spinels -- Thermal Analysis Kinetics of the Solid-State Reduction of Nickel Laterite Ores by Carbon -- Thermodynamic and Experimental Investigations of High Temperature Refractory Corrosion by Molten Slags -- Thermodynamic Calculation on the Reactivity between Slag and Ti-stabilized Stainless Steel -- Part 4: Alloys and Materials Preparation -- Development of a Novel, Low-cost Titanium Extraction Process for Bulk or Powder Applications -- Evolution of Non-metallic Inclusions in Solid Fe-Al-Ti-N Alloy during Heating -- Preparation of Low-carbon Ti2O3 by Carbon thermal Reduction of the Mixture of Titanium Dioxide and Activated Carbon under Vacuum Condition -- Pyrometallurgical Studies for Manganese Extraction Using Turkish Ore Reserves -- Trace Elements Behavior during the Oxidation of Liquid SiMn Alloy -- Effect of Microalloy Elements V And Mg on Organization at High Heat Input Welding Shipbuilding Structure Steel -- Part 5: Extraction and Recovery of Metals -- Effect of Carbon Reductant On The Formation of Copper Doped Titanium Oxycarbonitride by Carbothermal Reduction and Nitridation -- Cohering Behavior of Scrap Powder in Kiln by a Novel Natural Stacking Method -- Direct-to-blister Copper Smelting with the ISASMELT™ Process -- Improving Separation of Cu-Fe from Copper Slag by Mineral Phase Reconstruction -- Phase Transformation of High Calcium Type Tin, Iron-bearing Tailings during Magnetizing Roasting Process -- Sensitivity of Contactless Ultrasound Processing to Variations of the Free Surface of the Melt with Induction Heating -- Extraction of Zinc from Willemite by Sodium Salt Roasting and Ammonia-leaching Process -- Part 6: Ironmaking and Steelmaking -- Influence of Puhrstahl Heraeus Refining Process on Aluminum Consumption in Interstitial-Free Steel Smelting Process -- Formation Mechanisms of Inclusions in Spring Steels -- Investigation on Coal Combustion Behaviors under the Oxygen Blast Furnace -- Inclusion Control with Ca Treatment to Improve Castability of a Low Carbon Al Killed Steel -- High Temperature Mineralization Mechanism of Granules during Iron Ore Sintering Process -- Reduction Behaviors of Sinter Made from Magnetite Concentrates in Reducing Process Simulated COREX Shaft Furnace -- Part 7: Treatment and Recycling of Slag/Wastes -- Introduction of Matte Droplets in Copper Smelting Slag -- Dissolution Behavior of Fe from Glassy Oxide Phase in Steelmaking Slag -- Penetration Depth of Microwave in Tire Rubber -- Effect of TiO2 on Thermophysical Properties and Structure of P-bearing Steelmaking Slags -- Analysis for Optimum Conditions for Recovery of Valuable Metals from E-Waste through Black Copper Smelting -- Precipitation Behavior of MxTi3-xO5 in the Titanium-Bearing Electric Furnace Slag -- Part 8: Utilization of Complex Ores -- Evaluation of Molybdenum Concentrates -- Intensification of Gold Leaching from a Multi-refractory Gold Concentrate by the Two-stage Roasting-alkaline Sulfide Washing-cyanidation Process -- The Recovery of Cobalt from Copper Converter Slag by Reduction-sulfurization Smelting at High Temperature -- Roasting of Celestite in Laboratory Scale Rotary Furnace -- The Experimental Study of CaCO3 in the Vanadium Extraction Process -- The Extraction of Zinc from Zinc Ferrite by Calcified Roasting and Ammonia Leaching Process -- Part 8: Poster I -- A New Method to Detect the High Temperature Distribution in the Ironmaking and Steelmaking Industry -- A Study for Reconstructing the Three-dimensional Temperature Field of a Blast Furnace Raceway Based on Monte Carlo Method -- Behaviour of Silicon in Nickel Laterite by Carbothermic Reduction in Vacuum -- Effect of CaO Addition on the Behavior of Vanadium and Phosphorus during Oxidation and Leaching Process -- Effect of Inner Shape on Blast Furnace Performance for Iron Making -- Effect of Lance Configurations on Coal Flow and Combustion Characteristics -- Effect of Silicon on Removal of Phosphorus from High Phosphorus Si-Mn alloy by CaO-Based Slag -- Effect of Super Gravity on the Solidification Structure and C Segregation of High Carbon Steel -- High Temperature Distribution Measurement of the Blast Furnace Raceway through Imaging Techniques and Optimization Algorithms -- Kinetics and Reduction Behavior of Self-reducing Briquettes Containing Blast Furnace Dust -- Model Analysis of the Phenomena of Pulverized Coal Injection in Blast Furnace -- Sintering Performance of Blends Containing High Proportion of Limonite Iron Ore Fines -- Thermodynamics Study on Phosphorus Distribution between 2CaO•SiO2-3CaO•P2O5 Solid Solution and Liquid Slag -- Two-step Copper Smelting Process at Dongying Fangyuan -- Part 9: Poster II -- Comparison of the Ringing Characteristics between Acid and Alkaline Iron Ore Pellets Powder in Kiln -- Comprehensive Utilization of Ludwigite Iron Concentrate by Gas-based Direct Reduction -- Decarburization of Spent Petrochemical Catalysts via Microwave Oxidation Roasting -- Effect of FeO Content in Laterite Nickel Slag on the Corrosioin Behaviour of Refractory Materials -- Effects of Blowing Conditions on the Dispersion States of Materials Charged into Bottom Blown Oxygen Smelting Furnace -- Effects of Pre-oxidation and Additives on Carbothermic Reduction of Ilmenite Concentrate -- Influence of Converter Slag on Decomposition Behavior of Limestone during BOF Steelmaking Process -- Influence of Hot Charge on Blast Furnace Performance for Iron Making -- Investigation and Application of Evolution System of Stock Surface Gas Flow Distribution in Blast Furnace -- Investigation of the Carbothermic Reduction of Chromium-containing Vanadium Extraction Residue -- Molecular Dynamics Study of the Structural Properties with Varying -- One-step Extraction of Lead from Spent Lead-acid Battery Paste via Reductive Sulfur-fixing Smelting: Thermodynamic Analysis -- Removal of Cd(II) Ion from Aqueous Solution by Adsorption on Wasted Low Grade Phosphorus-containing Iron Ore -- Research on the Flow Behavior of Molten Slag through Pore -- Study on the Influence of Materials on Heat Transfer Characteristics of Blast Furnace Cooling Staves.…”
Full-text access
OPAC'ta görüntüle

First RILEM International Conference on Concrete and Digital Fabrication - Digital Concrete 2018

İçindekiler: “…Kaufmann -- Alternative Reinforcements for Digital Concrete Construction, by Viktor Mechtcherine, Venkatesh Naidu Nerella, Hiroki Ogura, Jasmin Grafe, Erik Spaniol, Martin Hertel, and Uwe Füssel -- Additive Manufacturing and Characterization of Architectured Cement-based Materials via X-ray Micro-Computed Tomography, by Mohamadreza Moini, Jan Olek, Bryan Magee, Pablo Zavattieri, and Jeffery Youngblood -- Hardened Properties of 3D Printable "One-Part" Geopolymer for Construction Applications, by Behzad Nematollahi, Ming Xia, Shin Hau Bong, and Jay Sanjayan -- Bond strength in 3D printed geopolymer mortar, by Biranchi Panda, Nishar Ahamed Noor Mohamed, Yi Wei Daniel Tay, and Ming Jen Tan -- Potentials of steel fibres for Mesh Mould elements, by P. …”
Full-text access
OPAC'ta görüntüle

Polymer Synthesis Based on Triple-bond Building Blocks

Full-text access
OPAC'ta görüntüle

Advances in Sustainable Polymers Processing and Applications /

İçindekiler: “…Part I: Sustainable Polymers for Biomedical Applications -- Chapter 1- Biomaterials for Biomedical Devices and Implants -- Chapter 2- Biocompatible Polymer based Nanofibres for Tissue Engineering Application -- Chapter 3- Biodegradable Polymer based Nanohybrids for Controlled Drug Delivery and Implant Applications -- Chapter 4- Biobased Nanohydrogels for Controlled Drug Delivery -- Chapter 5- Resorbable Polymers for Biomedical Applications -- Chapter 6- Carbohydrate Therapeutics Based on Polymer grafted Nanoparticles -- Chapter 6-Hydrogels for Wound Healing Applications Facilitated by Herbal Bioactive Agents -- Chapter 7: Polymeric Nanoparticles for Chemotherapeutic Drug Delivery -- Part II: Sustainable Polymers for Food Packaging Applications -- Chapter 8- Polysaccharide Based Films for Food Packaging and other Application -- Chapter 9- Biopolymer based Polylactic acid for food packaging applications -- Chapter 10- Bacterial Cellulose based Hydrogel Film for Sustainable Food Packaging -- Chapter 11- Biodegradable Polymer Based Blown Films for Food Packaging Application -- Part III: Sustainable Polymers for other emerging application -- Chapter 12- Advances in Biobased Polymer Membranes for CO2 Separation -- Chapter 13- Bio-based Polymers in stimuli responsive membranes -- Chapter 14- Microbial Fuel Cell: A synergistic Flow Approach for Energy Power Generation and Wastewater Treatment -- Chapter 15- Sustainable Polymer based Microfluidic Fuel Cells for Low Power Applications -- Chapter 16- Sustainable Polymeric Nanocomposites for Multifaceted Advanced Applications -- Chapter 17- Bioinspired interfaces for High performance/Advanced application -- Chapter 18- Biobased Polymeric Conductive Materials for Advanced Applications -- Chapter 19- Aerobic Composting of Bioplastics.…”
Full-text access
OPAC'ta görüntüle

Calcined Clays for Sustainable Concrete Proceedings of the 2nd International Conference on Calcined Clays for Sustainable Concrete /

İçindekiler: “…Riding -- Assessment of cuban kaolinitic clays as source of supplementary cementitious materials to production of cement based on clinker - calcined clay - limestone, by Roger S. …”
Full-text access
OPAC'ta görüntüle

Creep and Hygrothermal Effects in Concrete Structures Yazar: Bažant, Zdeněk P., Jirásek, Milan

Full-text access
OPAC'ta görüntüle