Arama Sonuçları - (( east to need materials. ) OR ((( part to based materials. ) OR ( most to based materials. ))))

Bio-Based Materials as Applicable, Accessible, and Affordable Healthcare Solutions Yazar: Tracy, Adam A., Bhatia, Sujata K., Ramadurai, Krish W.

Full-text access
OPAC'ta görüntüle

Structural Materials Properties and Selection / Yazar: Pero-Sanz Elorz, José Antonio, Fernández González, Daniel, Verdeja, Luis Felipe

Full-text access
OPAC'ta görüntüle

Polysaccharide Based Hybrid Materials Metals and Metal Oxides, Graphene and Carbon Nanotubes / Yazar: Vilela, Carla, Pinto, Ricardo João Borges, Pinto, Susana, Marques, Paula, Silvestre, Armando, da Rocha Freire Barros, Carmen Sofia

Full-text access
OPAC'ta görüntüle

Solid State Lighting Reliability Part 2 Components to Systems /

Full-text access
OPAC'ta görüntüle

Handbook of Maleic Anhydride Based Materials Syntheses, Properties and Applications /

İçindekiler: “…Part I: Introduction: Progress in Maleic Anhydride Production -- Part II: Reactions and Derivatives: Reactions Involving Maleic Anhydride -- Vegetable Oil-Maleic Anhydride and Maleimide Derivatives: Syntheses and Properties -- Part III: Maleic Anhydride-derived Polymers: The Quintessential Alternating Copolymer Family: Alkyl Vinyl Ether co-Maleic Anhydride Copolymers -- Industrially Significant Copolymers Containing Maleic Anhydride -- Ring-Opening Metathesis Polymerization (ROMP) using Maleic Anhydride based Monomers -- Colloidal and Physicochemical Properties of Maleic Anhydride Based Polymers -- Part IV Applications: Maleic Anhydride Applications in Personal Care -- Application of Maleic Anhydride in Adhesives and Coatings -- Application of Maleic Anhydride based Materials. .…”
Full-text access
OPAC'ta görüntüle

Bio-aggregates Based Building Materials State-of-the-Art Report of the RILEM Technical Committee 236-BBM /

İçindekiler: “…Effect of testing variables (method of production) -- 9.0 Introduction -- 9.1 Materials and methods -- 9.2 Results -- 9.3 Conclusion -- Acknowledgments -- References -- APPENDIX : Technical Commitee Report - Rilem TC 236 BBM - Bio based Building Materials - Round Robin test for hemp shiv Characterisation -- Round Robin Test For Hemp shiv Characterisation -- Part 1 : Evaluation Of Initial Water Content And Water Absorption -- 1 Introduction -- 2 Material -- 52% -- 18% -- 2.1 Microscopical description -- 3 Initial Water Content -- 3.1 Methods -- 3.2 Results -- 3.3 Concluding remarks on initial water content -- 4 Water Absorption -- 4.1 Description of the experimental methods -- 4.2 Results -- 4.3 Concluding remarks -- Summary of Findings -- Round Robin Test For Hemp shiv Characterisation -- Part 2: Bulk Density And Particle Size Distribution -- 5 Introduction -- 6 Material -- 52% -- 18% -- 7 Bulk Density -- 7.1 Methods -- 7.2 Results -- 7.3 Concluding remarks on bulk density -- 8 Particle Size Distribution -- 8.1 Sieving method -- 8.2 Image processing -- 8.3 Comparison between sieving and image analysis results -- 8.4 Concluding remarks on Particle Size Distribution -- Summary Of Findings -- Acknowledgements -- Round Robin Test For Hemp shiv Characterisation -- Part 3 : Thermal Conductivity -- 9 Introduction -- 10 Material -- 52% -- 18% -- 11 Thermal Conductivity -- 11.1 Experimental methods -- 11.2 Results -- 11.3 Concluding remarks -- Summary Of Findings -- Acknowledgements. .…”
Full-text access
OPAC'ta görüntüle

Sustainable Jute-Based Composite Materials Mechanical and Thermomechanical Behaviour / Yazar: Jabbar, Abdul

Full-text access
OPAC'ta görüntüle

Towards Bio-based Flame Retardant Polymers Yazar: Sonnier, Rodolphe, Taguet, Aurélie, Ferry, Laurent, Lopez-Cuesta, José-Marie

Full-text access
OPAC'ta görüntüle

Strain-Hardening Cement-Based Composites SHCC4 /

İçindekiler: “…Leung -- Performance Enhancement of Concrete Structures through Multi-Scale Crack Control, by Gabriel Jen and Claudia Ostertag -- Strengthening and Repair with Carbon Concrete Composites - the First General Building Approval in Germany, by Silke Scheerer, Elisabeth Schütze and Manfred Curbach -- Performance of Fiber Reinforced Materials: Historic Perspective and Glance in the Future, by Surendra Shah and Yuan Gao,- Applications of SHCC in Japan - Tools and tips for promoting its use, by Keitetsu Rokugo -- Material Design of TRC and TRC Impact Resistance, by Alva Peled.- Part 1. …”
Full-text access
OPAC'ta görüntüle

Performance-Based Specifications and Control of Concrete Durability State-of-the-Art Report RILEM TC 230-PSC /

Full-text access
OPAC'ta görüntüle

Extraction 2018 Proceedings of the First Global Conference on Extractive Metallurgy /

Full-text access
OPAC'ta görüntüle

Light Metals 2017

İçindekiler: “…Part 1: Alumina & Bauxite: Digestion and Calcination -- CFB Alumina Calciners - New and Future Generation Opportunities for Green Field Refineries -- Evolutional Development of Alkaline Aluminosilicates Processing Technology -- Characterization and Ore Dressing of Bauxite from Brazil -- Process Optimization for Diaspore Digestion Equilibrium using Response Surface Methodology -- Thermodynamic analysis and formation law of Q phase of calcium aluminate clinker -- Leaching Behavior of Alumina from Smelting Reduction Calcium Aluminate Slag with Sodium Carbonate Solution -- Part 2: Alumina & Bauxite: Bauxite Residues Technology -- Security Disposal and Comprehensive Utilization of Bauxite Residues -- Bauxite Residue Amendment Through the Addition of Ca and OR Mg Followed By Carbonation -- Application of Tricalcium Aluminate Instead of Lime for the recovery of aluminum in Middle-low Grade Bauxite in Calcification-Carbonization Process -- Low Temperature Reduction of Hematite in Red-Mud to Magnetite -- Recovery of Iron-, Titanium-bearing Constituents from Bauxite Ore Residue via Magnetic Separation Followed by Sulfuric Acid Leaching -- Processing diasporic red mud by the calcification-carbonation method -- Research of Flocculants and Dewatering Additives for Filtration of Red Mud -- Characterization of activated alumina production via spray pyrolysis -- Part 3: Alumina & Bauxite: Non-traditional Resources -- New process research on aluminium production from non-traditional aluminum resource by microwave chlorination -- Opportunities of pseudoboehmite processing from aluminum content raw material at sintering method -- Chemical Alumina Preparation by Using High Alumina Content Fly Ash -- A Novel Process of Alumina Production from Low-grade Bauxite Containing Sulfur -- Iron separation from bauxite through smelting-reduction process -- Thermodynamic behavior of lime desulfurization in sodium aluminate solution -- Part 4: Alumina & Bauxite: Poster Session -- A study on optimization ofprocessing parameters for synthesis of calcium hydroaluminosulfate using response surface methodology -- Part 5: Aluminum Alloys, Processing and Characterization: Alloy Development and Applications -- Design of New 6xxx Series Al Alloy Using the CALPHAD Thermodynamic Database -- Study of an Al-Ca Alloy with Low Young's Modulus -- Production Of 3004 Aluminum Alloy Sheet For Structural Applications From Twin Roll Casting -- Aluminum alloys with tailored TiB2 particles for composite applications -- Development of low expansion and high strength aluminium hybrid composite -- Part 6: Aluminum Alloys, Processing and Characterization: Solidification and Casting -- A model for a-Al(Mn,Fe)Si crystals -- Casting Characteristics of High Cerium Content Aluminum Alloys -- In-situ observation of fragmentation of primary crystals by ultrasonic cavitation in water -- The enhancement of mechanical properties of A356 alloy solidified at lower cooling rate via effectively grain refinement -- Secondary Aluminum Alloys Processed by Semisolid Process for Automotive Application -- Integrated casting-extrusion of an AA6082 aluminum alloy -- On Porosity Formation in Al-Si-Cu Cast Alloys -- Part 7: Aluminum Alloys, Processing and Characterization: Characterization -- Algorithm for Finding the Correlation between the Properties of Wrought Aluminum Alloys, the Chemical Composition and the Processing Parameters -- Analysis of an aluminium alloy containing trace elements -- Determination of aluminum oxide thickness on the annealed surface of 8000 series aluminum Foil by Fourier Transform Infrared Spectroscopy -- Test Uncertainty in Chemical Composition Analysis -- Real Time 3D Imaging and Laser Marking System for Industrial Traceability -- Production and Certification of Arconic Certified Reference Materials -- Characterization of Large Strain Extrusion Machining (LSEM) of AA7050 -- Interaction between fatigue micro-cracks and inclusion/matrix interface in high-strength Al alloy -- Influence of trace element additionson Fe bearing intermetallic solidification of a 6063 Al alloy -- Part 8: Aluminum Alloys, Processing and Characterization: Heat Treatment -- THE OPTIMIZATION OF THE HOMOGENIZATION TREATMENT OF AA7075 -- Precipitation modeling and validation of Al-5%Cu-0.4%Mn alloy using quench factor analysis -- Young's modulus of Al-Si-Mg-Cu based alloys under different heat treatment processes -- Intergranular Corrosion Investigation on EN-AW 6082 Redraw Rod -- The influence of process parameters and thermomechanical history on streaking defects in AA6060 extrusions -- Effect of Heat-treatment on Microstructure and Mechanical Properties of Sonicated Multicomponent AlMgSiCuZn Alloy -- Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys -- Part 9: Aluminum Alloys, Processing and Characterization: Plasticity and Mechanical Behavior -- New Yield Criterion for Description of Plastic Deformation of Face-Centered Cubic Single Crystals -- Quantifying As-cast and Homogenized AA7050 Mechanical Properties through Compression Testing -- Determining a Stable Texture Condition Under Complex Strain Path Deformations in Face Centered Cubic Metals -- Microstructural transition and elevated temperature tensile properties of modified Al-Si-Cu-Mg alloys -- Effects of alloying elements on anneal-hardening behavior of aluminum alloy foils -- Increasing strength and corrosion resistance of AlMgSi alloys by tailor-made thermomechanical processing -- Microstructural optimization of a High Mechanical Properties (HMP) aluminum alloy by using CobaPress™ process -- Cyclic Stress-strain Behavior and Low Cycle Fatigue Life of AA6061 Aluminum Alloy -- Part 10: Aluminum Alloys, Processing and Characterization: Poster Session -- Corrosion of Al-Mg Alloys in Ethanol -- Warm pressing of Al powders: an alternative consolidation approach -- Part 11: Aluminum Reduction Technology: Dry Scrubbing, Alumina Transport and Dissolution -- Spreading of Alumina and Raft Formation on the Surface of Molten Cryolite -- Fluoride Capture Capacity of SGA: The Interplay between Particle and Pore Size Distribution -- Predictive Formulae for the Competitive Adsorption of HF and SO2 on Smeltergrade Alumina Used in Dry Scrubbing Applications -- Pot Gas Treatment at High Gas Temperatures -- Influence of Handling Parameter on Powder Properties -- Part 12: Aluminum Reduction Technology: Anode Effect and PFC Emissions -- Preventive Treatment of Anode Effects Using On-Line Individual Anode Current Monitoring -- Reduction in EGA Jebel Ali Potroom GHG Emissions -- Partial Anode Effect in a Two-Compartment Laboratory Alumina Reduction Cell -- Co-evolution of Carbon Oxides and Fluorides during the Electrowinning of Aluminium with Molten NaF-AlF3-CaF2-Al2O3 Electrolytes -- Part 13: Aluminum Reduction Technology: Cell Lining Materials -- Chemical stability of thermal insulating materials in sodium vapour environment -- AGING OF INSULATING LININGS IN ALUMINIUM ELECTROLYSIS CELLS -- Cathode Wear Based on Autopsy of a Shut down Aluminium Electrolysis Cell -- SPL Recycling and Re-Processing -- Alternative applications of SPL: Testing ideas through experiments and mathematical modeling -- Part 14: Aluminum Reduction Technology: Cell Voltage and Pot Control -- Clustering Aluminium Reduction Cells -- Application of Multivariate Statistical Process Control with STARprobeTM Measurements in Aluminium Electrolysis Cells -- Study Of Impact Of The Anode Slots On The Voltage Fluctuations Of Aluminium Electrolysis Cell Using Bubble Layer Simulator -- Detecting, Identifying and Managing Systematic Potline Issues with Generation 3 Process Control -- Predicting Instability and Current Efficiency of Industrial Cells -- Part 14: Aluminum Reduction Technology: Electrolyte and Fundamentals -- Sodium in Aluminium as a Cell Performance Indicator: A Quantitative Framework -- Bauxite processing via chloride route to produce chloride products and subsequent electrolysis of aluminium chloride to produce aluminium metal -- Stability of Chlorides in Cryolitic Electrolyte -- Role of Heat Transfer in the Formation of Carbon Oxides in Smelting Cells -- Part 15: Aluminum Reduction Technology: Modelling and Cell Design -- Improving The Understanding Of BUSBAR Design And Cell MHD Performance -- LES turbulence modeling approach for molten aluminium and electrolyte flow in aluminum electrolysis cell -- MHD of Large Scale Liquid Metal Batteries -- Low energy consumption cell designs involving…”
Full-text access
OPAC'ta görüntüle

First RILEM International Conference on Concrete and Digital Fabrication - Digital Concrete 2018

İçindekiler: “…Kaufmann -- Alternative Reinforcements for Digital Concrete Construction, by Viktor Mechtcherine, Venkatesh Naidu Nerella, Hiroki Ogura, Jasmin Grafe, Erik Spaniol, Martin Hertel, and Uwe Füssel -- Additive Manufacturing and Characterization of Architectured Cement-based Materials via X-ray Micro-Computed Tomography, by Mohamadreza Moini, Jan Olek, Bryan Magee, Pablo Zavattieri, and Jeffery Youngblood -- Hardened Properties of 3D Printable "One-Part" Geopolymer for Construction Applications, by Behzad Nematollahi, Ming Xia, Shin Hau Bong, and Jay Sanjayan -- Bond strength in 3D printed geopolymer mortar, by Biranchi Panda, Nishar Ahamed Noor Mohamed, Yi Wei Daniel Tay, and Ming Jen Tan -- Potentials of steel fibres for Mesh Mould elements, by P. …”
Full-text access
OPAC'ta görüntüle

Light Metals 2019

İçindekiler: “…-- AP44 Development at Alma -- EGA New D20+ Technology with Reduced Energy Consumption -- Potline Start up without Anode Effect Frequency -- Thermo-electrical Modeling of an Aluminum Reduction Cell -- Restarting Electrochemical Cell with a Cold Metal (D18 Cell) -- Part 4. Cast Shop Technology -- Root Cause Analysis Findings of a Force 3 Explosion -- Condensation Warning System for Dry Material Storage -- A New Aluminium Crucible Skimmer (ACS) for Smelter Plants - Main Benefits Further to Two Years of Experimentation in Industrial Environment -- Drive-in Feeding of Crucibles for Casting Machine -- In-line Salt Fluxing Process with an FFDTM Industrial Experience with a Box-Type Degasser -- The "Alcoa Filter System": A Cost Effective Solution for Enhanced CFF Performance -- Continuous Centrifugal Casting: A Revolutionary Process for Casting Aluminium Tubes -- Development of a Prototype Unit for Continuous Centrifugal Casting of Aluminium Tubes -- Constellium's R&D on the Use of Power Ultrasound in Liquid Aluminum: An Overview -- Molten Metal Cleanliness: Recent Developments to Improve Measurement Reliability -- On-site Benchmark of LiMCA II vs. …”
Full-text access
OPAC'ta görüntüle

Light Metals 2018

İçindekiler: “…-- AP44 Development at Alma -- EGA New D20+ Technology with Reduced Energy Consumption -- Potline Start up without Anode Effect Frequency -- Thermo-electrical Modeling of an Aluminum Reduction Cell -- Restarting Electrochemical Cell with a Cold Metal (D18 Cell) -- Part 4. Cast Shop Technology -- Root Cause Analysis Findings of a Force 3 Explosion -- Condensation Warning System for Dry Material Storage -- A New Aluminium Crucible Skimmer (ACS) for Smelter Plants - Main Benefits Further to Two Years of Experimentation in Industrial Environment -- Drive-in Feeding of Crucibles for Casting Machine -- In-line Salt Fluxing Process with an FFDTM Industrial Experience with a Box-Type Degasser -- The "Alcoa Filter System": A Cost Effective Solution for Enhanced CFF Performance -- Continuous Centrifugal Casting: A Revolutionary Process for Casting Aluminium Tubes -- Development of a Prototype Unit for Continuous Centrifugal Casting of Aluminium Tubes -- Constellium's R&D on the Use of Power Ultrasound in Liquid Aluminum: An Overview -- Molten Metal Cleanliness: Recent Developments to Improve Measurement Reliability -- On-site Benchmark of LiMCA II vs. …”
Full-text access
OPAC'ta görüntüle

Polymer Synthesis Based on Triple-bond Building Blocks

Full-text access
OPAC'ta görüntüle

Recycled Aggregate Concrete Structures Yazar: Xiao, Jianzhuang

Full-text access
OPAC'ta görüntüle

Empirical nursing : the art of evidence-based care / Yazar: Garrett, Bernie

Full-text access
OPAC'ta görüntüle

Cellulose-Based Superabsorbent Hydrogels

Full-text access
OPAC'ta görüntüle

Smart Intelligent Aircraft Structures (SARISTU) Proceedings of the Final Project Conference /

Full-text access
OPAC'ta görüntüle