Arama Sonuçları - (( engineering materials porous. ) OR ( engineering mechanical models. ))~

Multiphysics in Porous Materials Yazar: Liu, Zhen (Leo)

Full-text access
OPAC'ta görüntüle

Submicron Porous Materials

Full-text access
OPAC'ta görüntüle

Computational Modeling, Optimization and Manufacturing Simulation of Advanced Engineering Materials

Full-text access
OPAC'ta görüntüle

Modelling of Concrete Behaviour at High Temperature State-of-the-Art Report of the RILEM Technical Committee 227-HPB /

İçindekiler: “…1 Scope -- 1.1 General comments -- 1.2 Context and objectives -- 2 Introduction -- 2.1 Physical aspects of heated concrete -- 2.2 Modelling -- 2.3 References -- 3 Engineering Modelling -- 3.1 General approach -- 3.2 Eurocode -- 3.3 Thermal analysis -- 3.4 Mechanical analysis -- 3.5 Spalling -- 3.6 Examples of national guidelines -- 3.7 Discussion, limits -- 3.8 References -- 4 Advanced Modelling -- 4.1 Concrete as multiphase porous material -- 4.2 Heat and mass transfer -- 4.3 Key points for modelling cement-based materials at high temperature -- 4.4 Numerical approach -- 4.5 Simplified one-fluid model -- 4.6 Simplified thermo-mechanical approach -- 4.7 Mechanical modelling -- 4.8 References -- 5 Constitutive Parameters -- 5.1 Hygral Parameters -- 5.2 Thermal Parameters -- 5.3 Mechanical Parameters -- 5.4 References -- 6 Conclusion.…”
Full-text access
OPAC'ta görüntüle

Plasticity-Damage Couplings: From Single Crystal to Polycrystalline Materials Yazar: Cazacu, Oana, Revil-Baudard, Benoit, Chandola, Nitin

Full-text access
OPAC'ta görüntüle

Mechanics of Composite and Multi-functional Materials, Volume 7 Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics  /

Full-text access
OPAC'ta görüntüle

Wave Dynamics and Composite Mechanics for Microstructured Materials and Metamaterials

Full-text access
OPAC'ta görüntüle

Advances in Computational Plasticity A Book in Honour of D. Roger J. Owen /

Full-text access
OPAC'ta görüntüle

8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials

Full-text access
OPAC'ta görüntüle

Continuum Mechanics through the Ages - From the Renaissance to the Twentieth Century From Hydraulics to Plasticity / Yazar: Maugin, Gérard A.

Full-text access
OPAC'ta görüntüle

Soft Actuators Materials, Modeling, Applications, and Future Perspectives /

İçindekiler: “…Progress and Current Status of Materials and Properties of Soft Actuators -- Current Status of Applications and Markets of Soft Actuators -- Electromagnetic Heating -- Thermo-Responsive Nanofiber Mats Fabricated by Electrospinning -- Evolution of Self-Oscillating Polymer Gels as Autonomous Soft Actuators -- Polyrotaxane Actuators -- Ionic Conductive Polymers -- Conducting Polymers -- Humidity-Sensitive Conducting Polymer Actuators -- Carbon Nanotube/Ionic Liquid Composites -- Ion Gels for Ionic Polymer Actuators -- Ionic Liquid/Polyurethane/PEDOT:PSS Composite Actuators -- Dielectric Gels -- Dielectric Elastomers -- Piezoelectric Polymers -- Thermal and Electrical Actuation of Liquid Crystal Elastomers/Gels -- Spiropyran-Functionalized Hydrogels -- Photomechanical Energy Conversion with Cross-Linked Liquid-Crystalline Polymers -- Photoredox Reaction -- Magnetic Fluid Composite Gels -- Magnetic Particle Composite Gels -- Molecular Mechanism of Electrically Induced Volume Change of Porous Electrodes -- Computational Modeling of Mechanical Sensors Using Ionic Electro-Active Polymers -- Distributed Parameter System Modeling -- Control of Electro-Active Polymer Actuators with Considering Characteristics Changes -- Motion Design-A Gel Robot Approach -- Motion Control -- IPMC Actuation Mechanisms and Multi-Physical Modeling -- Sensing Properties and Physical Model of Ionic Polymer -- Modelling of Dielectric Elastomer Actuator -- Modelling of Dielectric Gel using Multi-Physics Coupling Theory -- Modeling and Control of Fishing-Line/Sewing-Thread Artificial Muscles (Twisted and Coiled Polymer Fibers, TCPFs) -- Underwater Soft Robots -- IPMC Actuator-Based Multifunctional Underwater Microrobots -- Medical Applications -- Elastomer Transducers -- Dielectric Elastomer Sensors: Development of Stretchable Strain Sensor System -- Tissue Engineering Approach to Making Soft Actuators -- Integration of Soft Actuators based on a Biomolecular Motor System to Develop Artificial Machines -- Employing Cytoskeletal Treadmilling in Bio-Actuators.…”
Full-text access
OPAC'ta görüntüle

Thermal Non-Equilibrium in Heterogeneous Media Yazar: de Lemos, Marcelo J.S

Full-text access
OPAC'ta görüntüle

Proceedings of the International Conference on Martensitic Transformations: Chicago

İçindekiler: “…Novel Functional Behaviors: Beyond Shape Memory Effect & Superelasticity -- Investigation of Precipitation Processes in NiTi Filaments -- Effect of microstructure on the low-cycle fatigue properties of a Fe-15Mn-10Cr-8Ni-4Si austenitic alloy -- Martensitic Transformation of Ni-Mn-X Heusler Alloys with X = Ga, In and Sn -- Reversible negative thermal expansion response and phase transformation behavior of a Ti-rich Ti54Ni46 alloy prepared by rapid solidification -- Part 7. Engineering Applications and Devices -- Film and foil-based shape memory alloy micro actuators for fluid handling -- Functional stability of the Ni51Ti49 two-way shape memory alloy as artificial anal sphincter during thermo-mechanical cycling -- Influence of Contact Friction on Force-deflection of Orthodontic NiTi Archwire: A Computational Study -- Features Cavitation Resistance of Multifunctional Coatings from Materials with a Shape Memory Effect -- Microstructure and Mechanical Behaviors of Electron Beam Welded Ti44Ni47Nb9 shape memory alloys -- Relationship between Applied Stress and Hydrogen-related Fracture Behavior in Martensitic Steel. …”
Full-text access
OPAC'ta görüntüle

TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings

İçindekiler: “…Part 1: 2017 Symposium on Functional Nanomaterials: Emerging Nanomaterials and Nanotechnology -- High-performance Supercapacitors Based on Hierarchical VOx Microspheres Forming from Hyperbranched Nanoribbons -- Potential of Magnetotactic Bacteria for the Fabrication of Iron Nanoparticles -- Facile Green Synthesis and Characterization of Water-soluble Superparamagnetic Iron Oxide Nanoparticles-gold Porphyrin Conjugate for Improved Photodynamic Therapy -- Synthesis of AgNP's from Industrial Wastes -- Synthesis of Mn2O3 Nanopowders with Urea and Citric Acid by Solution Combustion Route -- Part 2: Additive Manufacturing of Metals: Establishing Location-Specific Processing-Microstructure-Property Relationships -- Evolution of Aluminum Alloys Structure at Production Phases of 3D Products by Methods of Additive Technologies -- Characterization of Multiperforated Plates Manufactured by SLM and EBM for Aeroengine Applications -- Direct Laser Metal Deposition of Eutectic Al-Si Alloy for Automotive Applications -- Additive Manufacturing to Produce Standard and Custom Alloy Titanium -- Aiming for Modeling-assisted Tailored Designs for Additive Manufacturing -- Part 3: Additive Manufacturing: Building the Pathway towards Process and Material Qualification -- The Use of Laser Ultrasound to Detect Defects in Laser Melted Parts -- SLM Process Variables and Part Geometry Optimization Based on Numerical Prediction of Process Induced Distortions -- Optimizing, Fabricating and Characterizing Additively Manufactured Process Tubing -- Scaling Relationships for Direct Ink Writing with Acoustic Focusing -- The Influence of Gas Cooling in Context of Wire Arc Additive Manufacturing: A Novel Strategy of Affecting Grain Structure and Size -- Microstructure and Mechanical Properties of Laser Deposited Ni/WC Metal Matrix Composite Coatings -- Composite Powder Consolidation Using Selective Laser Melting: Input Energy/Porosity Morphology/Balling Effect Relation -- Part 4: Advanced Characterization Techniques for Quantifying and Modeling Deformation Mechanisms -- Strain Localization Structures in Textured Magnesium AZ31 under Reversed Loading via Multi-scale Digital Image Correlation -- Deformation and Strengthening Mechanisms in AISI 321 Austenitic Stainless Steel under both Dynamic and Quasi-static Loading Conditions -- Analysis of Dislocation Structures in Ferritic and Dual Phase Steels Regarding Continuous and Discontinuous Loading Paths -- Microstructural Characterization of Inconel 600 Tubes after Tensile Tests at Various Temperatures and Strain Rates -- Part 5: Advanced High-Strength Steels -- Influences of Thermomechanical Treatments on the Microstructure Evolution and Mechanical Properties of Nano-precipitates Strengthened Steels -- Effects of Solid Solution Treatment on the Microstructure and Mechanical Properties in the Ultra-high Strength Steel Strengthened by Nanoscale Particles -- Effects of Microstructure on the Strain Rate Sensitivity of Advanced Steels -- Part 6: Advanced Materials in Dental and Orthopedic Applications -- Characterization of Chitin Synthesized from Snail Shell -- Titanium-magnesium Composite for Dental Implants (BIACOM) -- Part 7: Alloys and Compounds for Thermoelectric and Solar Cell Applications V -- Thermoelectric Behaviour of Polyvinyl Acetate /CNT Composites -- Part 8: Applications of Solidification Fundamentals -- Microstructure Characteristics of A356 Nanocomposites Manufactured Via Ultrasonic Cavitation Processing under Controlled Solidification Conditions -- Part 9: Biological Materials Science -- Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants -- Osteoporosis and fatigue fracture prevention by analysis of bone microdamage -- Bone Remodeling under Tooth Loading -- Investigating Biochemical Constituents of Cymbopogon citratus Leaf: Prospects on Total Corrosion of Concrete Steel-rebar in Acidic-Sulphate Medium -- Two-step sintering effects on the microstructure and mechanical properties of forsterite scaffolds -- Part 10: Bulk Metallic Glasses XIV -- Material Behavior in Micro Milling of Zirconium based Bulk Metallic Glass -- Part 11: Computational Thermodynamics and Kinetics -- Comparison of the Phase-field Models to Predict the Recrystallization Kinetics -- Surface Reaction and Transport in Oxides Formed on FeCrAl Alloys in High Temperature Nitridation Environments -- Atomic Scale Modeling of Fe-Al-Mn-C Alloy using Pair Models and Monte-Carlo Calculations -- Control Technique Study of Non-metallic Inclusions in Low Carbon Steel by Rare Earth Final Deoxidization -- Effect of Cooling Rate on Phase Transformation and Microstructure Evolution in a Large Size Forged Ingot of Medium Carbon Low Alloy Steel -- Formation and Control of CaS Inclusion in Gear Steel 20MnCr5 -- Investigations on the Mechanical Deformation of Amorphous Alloy Nanowires Using Phase-field Modeling and Thermodynamics Avalanche Models -- Thermodynamic Modeling of Al-Fe-Cr Ternary System -- Part 12: Defects and Properties of Cast Metals -- AModeling and Experimental Investigation on the Formation of Acicular Silicon and Sludge in High Pressure Die Casting of a Modified A383 Alloy -- Hot-tearing of Multicomponent Al-Cu Alloys Based on Casting Load Measurements in a Constrained Permanent Mold -- Effect of Molybdenum Content, Pouring Temperature and Cooling Rate on the Casting Defects of High Chromium White Cast Iron -- Effect of Various Aluminum Content on the Formation of Inclusion -- Effect of Segregated Alloying Elements on the High Strength Steel Properties: Application to the Large Size Ingot Casting Simulation -- Thermal-Mechanical Model of Depression Formation in Steel Continuous Casting -- Study for the Initiation Locations of Longitudinal Surface Cracks on Beam Blank in the Mold of Continuous Casting -- The Influence of SEN and Upper Nozzle Design on the Flow Character for the Slab Quality -- Effect of the Addition of Ce and Si on the Hot Cracking Behavior of SiMn Alloy during the Solidification Process -- Modeling and Predication of Shrinkage Porosity Formation in Steel Ingot -- Numerical Analysis of Coupled Turbulent Flow and Macroscopic Solidification in a Billet Continuous Casting Mold with Electromagnetic Stirring -- Part 13: Environmentally Assisted Cracking: Theory and Practice -- Hydrogen embrittlement and hydrogen-enhanced strain-induced vacancies in a-iron -- Factors causing hydrogen embrittlement of cold-drawn pearlitic steel fractured under elastic/plastic region -- Corrosion of Nickel-Titanium, C110, and Al6061 in Gallium-based Liquid Metal Alloys -- Part 14: General Poster Session -- Synthesis and characterization of Al-B4C powders by mechanical alloying -- Direct Conversion of Celestite to SrCO3 by Wet Milling -- Part 15: High Temperature Electrochemistry III -- Electrochemistry in Molten LiF-BeF2 Salt for Fluoride Salt-Cooled High Temperature Reactor Applications -- Impurity Removal from Titanium Oxycarbide -- Next-Generation Molten Oxide Energy Materials R&D -- Effects of Oxide Precursor Preparation Parameters on the Electrochemical Reduction of Tantalum Pentoxide in Calcium Chloride Melt -- The Effect of Temperature on Electrochemical Codeposition of Mg-Ni Hydrogen Storage Alloys from Molten Salt System -- Part 16: Materials and Fuels for the Current and Advanced Nuclear Reactors VI -- Diffusion Studies in the Development of an FCCI Barrier for High-Burnup Metallic Nuclear Fuel -- Part 17: Materials Engineering of Soft Magnets for Power and Energy Applications -- Development of Mold Inductor for Power Conversion System -- Effect of Annealing Time on the Texture of a 2.8% Si Non-Oriented Electrical Steel after Inclined and Skew Rolling -- Multi-parameter Magnetic Material Characterization for High Power Medium Frequency Converters -- Part 18: Phase Transformations and Microstructural Evolution -- An Experimental Assessment of the a +a' Miscibility Gap in Fe-Cr -- Phase Transformation, Microstructural Evolution and Property Modification in Rapidly Solidified Grey Cast Iron -- Morphologyof Order-disorder Structures in Rapidly Solidified L12intermetallics -- Part 19: Recent Developments in Biological, Structural and Functional Thin Films and Coatings -- Development of Enamel Coatings in Accordance with Recent Regulations of Food Contact Materials -- Transmission Probability of Diffusing Particles - A Case Study -- Preparation of Porous Titanium Oxide Film by Sol-Gel Method -- Part 20:…”
Full-text access
OPAC'ta görüntüle

Proceedings of the 3rd Pan American Materials Congress

Full-text access
OPAC'ta görüntüle

Creep and Hygrothermal Effects in Concrete Structures Yazar: Bažant, Zdeněk P., Jirásek, Milan

Full-text access
OPAC'ta görüntüle

Multiscale Modelling in Sheet Metal Forming

Full-text access
OPAC'ta görüntüle

Transport Phenomena in Multiphase Systems

Full-text access
OPAC'ta görüntüle

Dynamic Behavior of Materials, Volume 1 Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /

Full-text access
OPAC'ta görüntüle

Drying and Energy Technologies

Full-text access
OPAC'ta görüntüle