Search Results - (chemicals OR chemical) additives management.

Kimyasal risk etmenleri / by Tuğsavul, H. Cihangir

Subjects: “…Chemicals Additives Management. 18429…”

Pesticide Residue in Foods Sources, Management, and Control /

Full-text access

Economic Model Predictive Control Theory, Formulations and Chemical Process Applications / by Ellis, Matthew, Liu, Jinfeng, Christofides, Panagiotis D.

Full-text access

Primed for Success: The Story of Scientific Design Company How Chemical Engineers Created the Petrochemical Industry / by Spitz, Peter H.

Full-text access

Extrusion-Cooking Techniques : Applications, Theory and Sustainability. by Moscicki, Leszek

Full-text access

Sustainable Construction and Building Materials Select Proceedings of ICSCBM 2018 /

Table of Contents: “…- State of The Art -- Ambient Cured Geopolymer Concrete Products -- Shrinkage Behaviour of High Strength Concrete Using Recycled Concrete Aggregate -- Influence of Nano-Silica on Characteristics of Cement Mortar and Concrete -- Durability Performance of Structural Light Weight Concrete -- Mechanical Properties of Fiber Reinforced Concrete Using Coal-Bottom Ash As Replacement of Fine Aggregate -- An Experimental Study on Mechanical Properties of Ultra-High Performance Fiber Reinforced Concrete (Uhpfrc) -- Strength Improvement of Cement Mortar In Addition of Ureolytic Microorganism -- An Experimental Study on Partial Replacement of Fine Aggregate by Vermiculate and Cement by Marble Powder.…”
Full-text access

Biosynthetic Technology and Environmental Challenges

Full-text access

Energy Technology 2017 Carbon Dioxide Management and Other Technologies /

Table of Contents: “…Part 1: Energy Technologies: Energy Technologies -- Continuous optimization of the energy input - The success story of AOS -- Part 2: Energy Technologies: CO2 Management and Sustainable Metallurgical Processes -- Transforming the way electricity is consumed during the aluminium smelting process -- The thermodynamics of slag forming inorganic phases in biomass combustion processes -- Leaching of Sb from TROF furnace Doré Slag -- Potential CO2 emission reduction and H2 production using industrial slag wastes originating from different industrial sectors -- Part 3: Energy Technologies: Novel Technologies -- Modeling Anthropogenic Heat Flux in Climate Models -- In-situ microscopic study of morphology changes in natural hematite and Cu-spinel particles during cyclic redox gas exposures for chemical looping applications -- Thermodynamic stability of condensed phases in the ternary system CaO-Cu-O by the EMF method -- Experimental Study on Electro-spraying of Ethanol Based on PDA Measurement -- Part 4: Energy Technologies: Heat Recovery -- Integrated utilization of sewage sludge and coal gangue in clinker manufacture -- Valuable metals and energy recovery from electronic waste streams -- Dry Granulation of Hot Metal and Heat Recovery from Off-Gas -- Energy Recovery of Livestock Waste in Taiwan -- Life cycle assessments of incineration treatment for sharp medical waste -- Part 5: Energy Technologies: Poster Session -- Effect of granularity on pretreatment of coke with microwave irradiation -- Effect of Microwave and ultrasonic coupling treatment on granularity and microstructure of Pulverized Coal -- Influence of Sodium on Coke Microstructure in Different Reaction Atmosphere -- Part 6: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste I -- Maximizing the values of steelmaking slags -- Recycling of zinc from the steelmaking dust in the sintering process -- Direct Preparation of Metal Doping Ni-Zn Ferrite from Zn-containing Electric Arc Furnace Dust by Calcination Method -- Part 7: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste II -- Synthesis and Characterization of Ferrochromium Slag Based Glass-ceramics -- Hydrometallurgical processing of copper smelter dust for copper recovery as nanoparticles: a review -- Part 8: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste III -- Chromium removal from iron-rich waste generated during processing lateritic nickel ores -- Removal of Magnesium from Liquor Produced by Nickel Mining by Crystallization -- Synthesis of Magnesium Oxide from Ferronickel Smelting Slag through Hydrochloric Acid Leaching-Precipitation and Calcination -- Thermodynamic analysis of the recycling of aircraft Al alloys -- Lithium-ion Battery Recycling Through Secondary Aluminum Production -- Part 9: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Poster Session -- Alternative method for materials separa-tion from crystalline silicon photovoltaic modules -- Bioleaching process for metal recovery from waste materials -- Chemical Analysis of Sludge Originating from Industrial Painting Performed in Brazil -- Preparing ferrosilicon alloy with copper slag -- Research on Optimization of Sintering Mixture with Low-grade Complex Ore -- Part 10: Solar Cell Silicon: Silicon Production, Crystallization, and Properties -- Study on Producing Solar Grade Silicon by Carbothermal Reduction of Andalusite Ore -- Phase Analysis of the Si-O2 System -- Characterization of Composition, Morphology, and Structure of Disi Raw Sandstones in Jordan -- Part 11: Solar Cell Silicon: Silicon Impurity Removal and Refining -- Effect of magnesium addition on removal of impurities from silicon by hydrometallurgical treatment -- Evaporation removal of boron in molten silicon using reactive fluxes -- Part 12: Solar Cell Silicon: Silicon Photovoltaics -- Electrodynamic Eddy Current Separation of End-of-Life PV Materials -- Investigation on Quartz Crucibles for Monocrystalline Silicon Ingots for Solar Cells -- Influence of Oxygen Content on the Wettability of Silicon on Graphite -- Particle Separation in Silicon Ingot Casting Using AC Magnetic Field -- Part 13: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Advances in Environmental Technologies: Characterization and Uncertainty -- Characteristics of Municipal Solid Waste Incineration Bottom Ash with Particulate Matters PM2.5 ~PM10 -- Part 14: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: New Areas of Value Recovery -- Accelerating life-cycle management protocols for new generation batteries -- Recovery of Metals and Nonmetals from Waste Printed Circuit Boards (PCBs) by Physical Recycling Techniques -- The use of rice husk ash as an aggregate for foundry sand mould production -- Part 15: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Poster Session -- Chemical reduction of Fe(III) in nickel lateritic wastewater to recover metals by ion exchange -- Chronopotentiometry applied to the determination of copper transport properties through a cation-exchange membrane -- Effect of flow rate on metals adsorption of synthetic solution using chelating resin Dowex XUS43605 in column experiments.…”
Full-text access

Energy Technology 2019 Carbon Dioxide Management and Other Technologies /

Table of Contents: “…Energy Technologies and CO2 Management Symposium -- Gas Hydrate-based CO2 Separation Process: Quantitative Assessment of the Effectiveness of Various Chemical Additives Involved in the Process -- Tar Removal from Hot Coke Oven Gas for H2 Amplification with In Situ CO2 Capture -- An Evaluation Method for Material and Energy Conversion Effect with Steel Manufacturing Process Data -- Preparation and Characterization of Activated Carbon from Waste Ion-exchange Resin for CO2 Adsorption -- Evaluation of Variation in the Life Cycle Based Environmental Impacts for Copper Concentrate Production -- Direct Reduction of Copper Slag Composite Pellets within Lignite Using Biomass as Binder -- Thermodynamic Analysis of Incineration Treatment of Waste Disposable Syringes in an EAF Steel-making Process -- The Reduction Kinetic of the Combined Cu-based Oxygen Carrier Used for Chemical Looping Gasification Technology -- Synergistic Effect Between Fat Coal and Poplar During Co-pyrolysis with Thermal Behavior and ATR-FTIR Analysis -- Flow Characteristic of Two-phase Bubble Reactor for Slag Waste Heat Recovery -- Improving Energy Efficiency in Direct Method for Continuous Casting of Lead Sheets -- Research on High Efficiency Energy Conversion Technology for Modern Hot Blast Stove -- An Exergy Study of Cowper Stove Operations with an Iron Blast Furnace -- Waste Heat Recovery from Aluminum Production -- Leaching and Carbonation of Electric Arc Furnace(EAF) Slag under a Microwave Field for Mineral Carbonation -- A Novel Preparation of Bi2O3 and Their Potent Photocatalytic Activity under Visible-light Irradiation -- Energy Conservation in Sintering Ignition Process Based on Comprehensive Ignition Intensity -- Part 2. …”
Full-text access

Energy Technology 2018 Carbon Dioxide Management and Other Technologies /

Table of Contents: “…Energy Technologies and CO2 Management Symposium -- Gas Hydrate-based CO2 Separation Process: Quantitative Assessment of the Effectiveness of Various Chemical Additives Involved in the Process -- Tar Removal from Hot Coke Oven Gas for H2 Amplification with In Situ CO2 Capture -- An Evaluation Method for Material and Energy Conversion Effect with Steel Manufacturing Process Data -- Preparation and Characterization of Activated Carbon from Waste Ion-exchange Resin for CO2 Adsorption -- Evaluation of Variation in the Life Cycle Based Environmental Impacts for Copper Concentrate Production -- Direct Reduction of Copper Slag Composite Pellets within Lignite Using Biomass as Binder -- Thermodynamic Analysis of Incineration Treatment of Waste Disposable Syringes in an EAF Steel-making Process -- The Reduction Kinetic of the Combined Cu-based Oxygen Carrier Used for Chemical Looping Gasification Technology -- Synergistic Effect Between Fat Coal and Poplar During Co-pyrolysis with Thermal Behavior and ATR-FTIR Analysis -- Flow Characteristic of Two-phase Bubble Reactor for Slag Waste Heat Recovery -- Improving Energy Efficiency in Direct Method for Continuous Casting of Lead Sheets -- Research on High Efficiency Energy Conversion Technology for Modern Hot Blast Stove -- An Exergy Study of Cowper Stove Operations with an Iron Blast Furnace -- Waste Heat Recovery from Aluminum Production -- Leaching and Carbonation of Electric Arc Furnace(EAF) Slag under a Microwave Field for Mineral Carbonation -- A Novel Preparation of Bi2O3 and Their Potent Photocatalytic Activity under Visible-light Irradiation -- Energy Conservation in Sintering Ignition Process Based on Comprehensive Ignition Intensity -- Part 2. …”
Full-text access

Chemistry Beyond Chlorine

Full-text access

Radionuclide and Metal Sorption on Cement and Concrete by Ochs, Michael, Mallants, Dirk, Wang, Lian

Full-text access

Mass and Energy Balances Basic Principles for Calculation, Design, and Optimization of Macro/Nano Systems / by Ashrafizadeh, Seyed Ali, Tan, Zhongchao

Full-text access

Quality Systems in the Food Industry by Fiorino, Marco, Barone, Caterina, Barone, Michele, Mason, Marco, Bhagat, Arpan

Table of Contents: “…Impact of Food-related Quality System Certifications for Chemical Food Additives -- Chemical Aspects of Intentional Food Adulteration and Quality Management Systems -- Quality Audits in Food Companies and the Examination of Technical Data Sheets -- Allergen Risks and the Use of Certified Lubricants in the Modern Food Industry.…”
Full-text access

The Chemistry of Thermal Food Processing Procedures by Micali, Maria, Fiorino, Marco, Parisi, Salvatore

Full-text access

Metrology in Chemistry by Bulska, Ewa

Full-text access

Brown Rice

Full-text access

Advanced Noncontact Cutting and Joining Technologies Micro- and Nano-manufacturing / by Mahamood, Rasheedat Modupe, Akinlabi, Esther Titilayo

Full-text access

Light Metals 2017

Table of Contents: “…Part 1: Alumina & Bauxite: Digestion and Calcination -- CFB Alumina Calciners - New and Future Generation Opportunities for Green Field Refineries -- Evolutional Development of Alkaline Aluminosilicates Processing Technology -- Characterization and Ore Dressing of Bauxite from Brazil -- Process Optimization for Diaspore Digestion Equilibrium using Response Surface Methodology -- Thermodynamic analysis and formation law of Q phase of calcium aluminate clinker -- Leaching Behavior of Alumina from Smelting Reduction Calcium Aluminate Slag with Sodium Carbonate Solution -- Part 2: Alumina & Bauxite: Bauxite Residues Technology -- Security Disposal and Comprehensive Utilization of Bauxite Residues -- Bauxite Residue Amendment Through the Addition of Ca and OR Mg Followed By Carbonation -- Application of Tricalcium Aluminate Instead of Lime for the recovery of aluminum in Middle-low Grade Bauxite in Calcification-Carbonization Process -- Low Temperature Reduction of Hematite in Red-Mud to Magnetite -- Recovery of Iron-, Titanium-bearing Constituents from Bauxite Ore Residue via Magnetic Separation Followed by Sulfuric Acid Leaching -- Processing diasporic red mud by the calcification-carbonation method -- Research of Flocculants and Dewatering Additives for Filtration of Red Mud -- Characterization of activated alumina production via spray pyrolysis -- Part 3: Alumina & Bauxite: Non-traditional Resources -- New process research on aluminium production from non-traditional aluminum resource by microwave chlorination -- Opportunities of pseudoboehmite processing from aluminum content raw material at sintering method -- Chemical Alumina Preparation by Using High Alumina Content Fly Ash -- A Novel Process of Alumina Production from Low-grade Bauxite Containing Sulfur -- Iron separation from bauxite through smelting-reduction process -- Thermodynamic behavior of lime desulfurization in sodium aluminate solution -- Part 4: Alumina & Bauxite: Poster Session -- A study on optimization ofprocessing parameters for synthesis of calcium hydroaluminosulfate using response surface methodology -- Part 5: Aluminum Alloys, Processing and Characterization: Alloy Development and Applications -- Design of New 6xxx Series Al Alloy Using the CALPHAD Thermodynamic Database -- Study of an Al-Ca Alloy with Low Young's Modulus -- Production Of 3004 Aluminum Alloy Sheet For Structural Applications From Twin Roll Casting -- Aluminum alloys with tailored TiB2 particles for composite applications -- Development of low expansion and high strength aluminium hybrid composite -- Part 6: Aluminum Alloys, Processing and Characterization: Solidification and Casting -- A model for a-Al(Mn,Fe)Si crystals -- Casting Characteristics of High Cerium Content Aluminum Alloys -- In-situ observation of fragmentation of primary crystals by ultrasonic cavitation in water -- The enhancement of mechanical properties of A356 alloy solidified at lower cooling rate via effectively grain refinement -- Secondary Aluminum Alloys Processed by Semisolid Process for Automotive Application -- Integrated casting-extrusion of an AA6082 aluminum alloy -- On Porosity Formation in Al-Si-Cu Cast Alloys -- Part 7: Aluminum Alloys, Processing and Characterization: Characterization -- Algorithm for Finding the Correlation between the Properties of Wrought Aluminum Alloys, the Chemical Composition and the Processing Parameters -- Analysis of an aluminium alloy containing trace elements -- Determination of aluminum oxide thickness on the annealed surface of 8000 series aluminum Foil by Fourier Transform Infrared Spectroscopy -- Test Uncertainty in Chemical Composition Analysis -- Real Time 3D Imaging and Laser Marking System for Industrial Traceability -- Production and Certification of Arconic Certified Reference Materials -- Characterization of Large Strain Extrusion Machining (LSEM) of AA7050 -- Interaction between fatigue micro-cracks and inclusion/matrix interface in high-strength Al alloy -- Influence of trace element additionson Fe bearing intermetallic solidification of a 6063 Al alloy -- Part 8: Aluminum Alloys, Processing and Characterization: Heat Treatment -- THE OPTIMIZATION OF THE HOMOGENIZATION TREATMENT OF AA7075 -- Precipitation modeling and validation of Al-5%Cu-0.4%Mn alloy using quench factor analysis -- Young's modulus of Al-Si-Mg-Cu based alloys under different heat treatment processes -- Intergranular Corrosion Investigation on EN-AW 6082 Redraw Rod -- The influence of process parameters and thermomechanical history on streaking defects in AA6060 extrusions -- Effect of Heat-treatment on Microstructure and Mechanical Properties of Sonicated Multicomponent AlMgSiCuZn Alloy -- Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys -- Part 9: Aluminum Alloys, Processing and Characterization: Plasticity and Mechanical Behavior -- New Yield Criterion for Description of Plastic Deformation of Face-Centered Cubic Single Crystals -- Quantifying As-cast and Homogenized AA7050 Mechanical Properties through Compression Testing -- Determining a Stable Texture Condition Under Complex Strain Path Deformations in Face Centered Cubic Metals -- Microstructural transition and elevated temperature tensile properties of modified Al-Si-Cu-Mg alloys -- Effects of alloying elements on anneal-hardening behavior of aluminum alloy foils -- Increasing strength and corrosion resistance of AlMgSi alloys by tailor-made thermomechanical processing -- Microstructural optimization of a High Mechanical Properties (HMP) aluminum alloy by using CobaPress™ process -- Cyclic Stress-strain Behavior and Low Cycle Fatigue Life of AA6061 Aluminum Alloy -- Part 10: Aluminum Alloys, Processing and Characterization: Poster Session -- Corrosion of Al-Mg Alloys in Ethanol -- Warm pressing of Al powders: an alternative consolidation approach -- Part 11: Aluminum Reduction Technology: Dry Scrubbing, Alumina Transport and Dissolution -- Spreading of Alumina and Raft Formation on the Surface of Molten Cryolite -- Fluoride Capture Capacity of SGA: The Interplay between Particle and Pore Size Distribution -- Predictive Formulae for the Competitive Adsorption of HF and SO2 on Smeltergrade Alumina Used in Dry Scrubbing Applications -- Pot Gas Treatment at High Gas Temperatures -- Influence of Handling Parameter on Powder Properties -- Part 12: Aluminum Reduction Technology: Anode Effect and PFC Emissions -- Preventive Treatment of Anode Effects Using On-Line Individual Anode Current Monitoring -- Reduction in EGA Jebel Ali Potroom GHG Emissions -- Partial Anode Effect in a Two-Compartment Laboratory Alumina Reduction Cell -- Co-evolution of Carbon Oxides and Fluorides during the Electrowinning of Aluminium with Molten NaF-AlF3-CaF2-Al2O3 Electrolytes -- Part 13: Aluminum Reduction Technology: Cell Lining Materials -- Chemical stability of thermal insulating materials in sodium vapour environment -- AGING OF INSULATING LININGS IN ALUMINIUM ELECTROLYSIS CELLS -- Cathode Wear Based on Autopsy of a Shut down Aluminium Electrolysis Cell -- SPL Recycling and Re-Processing -- Alternative applications of SPL: Testing ideas through experiments and mathematical modeling -- Part 14: Aluminum Reduction Technology: Cell Voltage and Pot Control -- Clustering Aluminium Reduction Cells -- Application of Multivariate Statistical Process Control with STARprobeTM Measurements in Aluminium Electrolysis Cells -- Study Of Impact Of The Anode Slots On The Voltage Fluctuations Of Aluminium Electrolysis Cell Using Bubble Layer Simulator -- Detecting, Identifying and Managing Systematic Potline Issues with Generation 3 Process Control -- Predicting Instability and Current Efficiency of Industrial Cells -- Part 14: Aluminum Reduction Technology: Electrolyte and Fundamentals -- Sodium in Aluminium as a Cell Performance Indicator: A Quantitative Framework -- Bauxite processing via chloride route to produce chloride products and subsequent electrolysis of aluminium chloride to produce aluminium metal -- Stability of Chlorides in Cryolitic Electrolyte -- Role of Heat Transfer in the Formation of Carbon Oxides in Smelting Cells -- Part 15: Aluminum Reduction Technology: Modelling and Cell Design -- Improving The Understanding Of BUSBAR Design And Cell MHD Performance -- LES turbulence modeling approach for molten aluminium and electrolyte flow in aluminum electrolysis cell -- MHD of Large Scale Liquid Metal Batteries -- Low energy consumption cell designs involving…”
Full-text access

Bioactive Molecules in Food

Table of Contents: “…-- Role of omega-3 fatty acids and olive oil polyphenols -- Mediterranean diet and cancer risk -- The French Paradox -- Moderate wine consumption and health -- Dairy products and the French paradox -- Plant proteins from legumes -- Nutritional and Phytochemical Content of High-Protein Crop -- Phytochemistry of Beans/pulses (mung, French bean, Faba, cowpea, lentil, chickpea) -- Pea proteins: chemistry, technology of production,and utilization -- Plant protein for food: opportunities and bottlenecks -- Phytochemical composition and bioactivities of lupin -- Design of Foods with bioactive Lipids for Improved Health -- Rapeseed, sunflower meal nutraceuticals -- Sunflower protein for α-tocopherol -- Two Faces of Vitamin E in the Lung -- Tocopherol/antioxidant/edible plants -- Inulin-type fructans application in gluten-free products -- Nutritional Profile of Gluten-Free Cereals and Pseudocereals -- Wheat Cultivars : Phytochemical Profile and Nutraceutical Value -- Quinoa (Chenopodium quinoa W.) and amaranth (Amaranthus caudatus L.) -- Chemical composition, antioxidant capacity, and sensory quality of dried jujube fruits -- Analysis and characterisation of phytochemicals in mulberry (Morus alba L.) -- Nutritional composition, physiological functions and processing of lotus (Nelumbo nucifera Gaertn.) seeds -- Hibiscus sabdariffa (Roselle) Extracts and Wine: Phytochemical Profile, Physicochemical Properties,and Carbohydrase Inhibition -- Vegetarians and vegans diet and its effects -- Low- and High-protein diet and metabolic regulation -- Nutritional value of rapeseed proteins and prevention of metabolic syndrome -- Production of Omega-3 Fatty Acids -- Metabolism and functional effects of plant-derived Omega-3 fatty acids in humans -- Omega-3 fatty acids and vegetarian diets -- Composition of virgin olive oil -- Olive Oil Polyphenols cholesterol management/chemopreventive, pharmacol -- Olive oil phenolic compounds affect the release of aroma compounds -- Omega-3 Fatty Acids EPA and DHA: Health Benefits -- Composition of rapeseed oils (fatty acids, tocopherols) -- Comparable health benefits of rapeseed and olive oils -- Natural estrogenic substances Origins and Effects -- Carotenoids, vitamin C, tocopherols, and retinol and cancer/carcinogenesis -- Triacylglycerols, fatty acids and tocopherols in hazelnut /nuts -- Lipid derivatives from avocado (Persea americana) pulp and biological activities -- Linseed/sunflower: a valuable feedstuff for meat production/ruminant -- Canola Oil in lactating dairy cow diets -- Total dietary fiber intakes / whole grain consumption/ biological effects -- Novel trends in development of dietary fiber rich meat products -- Whole grains fibre: metabolomics -- Cereal grain fructans -- Dietary fiber structures and their potential effect on the gut microbiota -- Evolution of biosynthetic pathways for vitamin c in plants -- In vitro bioaccessibility of carotenoids, flavonoids, and vitamin c from differently processed oranges and orange juices -- Polyphenols, vitamin c and antioxidant activity in wines -- Plants probiotics as a tool to produce highly functional fruits -- Carotenoids in food/pulses -- Vitamin and carotenoid concentrations of food products -- Natural food pigments and colorants -- Carotenoids from fruits and vegetables: Chemistry, analysis, occurrence, bioavailability and biological activities -- Carotenoids and health- pharmacology -- Metabolic engineering for the microbial production of carotenoids -- Protective effect of anthocyanins and xanthophylls -- Carotenoid oxidation products as stress signals in plants -- Chemical composition, functional properties and processing of carrot -- Carrots, tomatoes and cocoa: Research on dietary antioxidants -- Astaxanthin -- Purple-fleshed sweet potato -- Chemistry and biological properties of berries: straw-, rasp-, black-, blackcurrant, plum -- Polyphenols and Health -- Antioxidant properties of seaweed polyphenol -- Nutrigenomic modulations in mediating the cardiovascular protective effect of fruit polyphenols -- Bound phenolics in foods -- Tea Polyphenol and Purine Alkaloid Composition -- Theobroma: chemistry -- Wine, beer and cider and health -- Health benefits of wine -- Metabolomic approaches in the study of wine benefits in human health -- Whey-based beverage -- Polyphenol variability in the fruits and juices of a cider apple -- Tea, coffee and health benefits -- Benefits of polyphenols on gut microbiota and implications in human health -- Green tea and cancer chemoprevention -- Natural estrogenic substances origins and effects (isoflavonoids, Lignans, Coumestans). …”
Full-text access