Arama Sonuçları - (fire OR five) resistant plastics.

The Non-halogenated flame retardant handbook /

İçindekiler: “…3.3.4.2 Mechanical Properties3.3.4.3 Water Uptake and Chemical Resistance; 3.3.4.4 Thermal Properties; 3.3.4.5 Electrical Properties; 3.3.4.6 Rheological Properties; 3.4 Working Principle of Hydrated Mineral Flame Retardants; 3.4.1 Filler Loading, Flammability and Flame Propagation; 3.4.2 Smoke Suppression; 3.4.3 Heat Release; 3.5 Thermoplastic and Elastomeric Applications; 3.5.1 Compounding Technology; 3.5.2 Compound Formulation Principals; 3.5.3 Wire & Cable; 3.5.4 Other Construction Products; 3.5.5 Special Applications; 3.5.6 Engineering Plastics for E & E Applications.…”
Full-text access

Biologically Inspired Cognitive Architectures (BICA) for Young Scientists Proceedings of the First International Early Research Career Enhancement School (FIERCES 2016) /

Full-text access

Magnesium Technology 2019

İçindekiler: “…Magnesium Technology 2018 -- Magnesium Alloys: Challenges and Achievements in Controlling Performance, and Future Application Perspectives -- Solute/Stacking Fault Energies in Mg and Implications for Ductility -- Recent Developments in Magnesium Alloy Corrosion Research -- Towards Active Corrosion Protection of Mg Alloys Using Corrosion Inhibition Approaches -- Ni-P-MWNTs Composite Coatings on Magnesium Alloys AZ31 Part 1: MWNTs Content in Coating -- Ni-P-MWNTs Composite Coatings on Magnesium Alloys AZ31 Part 2: Tribological Behavior and MWNTs Content in Coating -- Adding Dimensions to the Immersion Testing of Magnesium Corrosion -- Effect of Fluoride Ion on the Microstructure and Properties of Permanganate Conversion Coating on AZ91D Magnesium Alloy -- Corrosion Characteristics of Two RE Containing Magnesium Alloys -- Surface and interfacial energies of Mg17Al12-Mg system -- Effect of Ca on the Microstructure and Mechanical Properties in Mg Alloys -- Investigationof Grain Refinement Method for AZ91 Alloy using Carbide Inoculation -- Experimental Study of the Solidification Microstructure in the Mg-rich Corner of Mg-Al-Ce System -- Material Design for Enhancing Toughness of Mg Alloy and Application for Biodegradable Devices -- Influences of Yttrium Content on Microstructure and Mechanical Properties of As-cast Mg-Ca-Y-Zr Alloys -- Strengthening and Toughening Behaviors of the Mg-9Al Alloy Containing Oxygen Atoms -- Investigations on Microstructure and Mechanical Properties of Non-flammable Mg-Al-Zn-Ca-Y Alloys -- Developmentof BioMg 250 Bioabsorbable Implant Alloy -- The Electrolytic Production of Magnesium from MgO -- Empirical Examination of the Formation of Mechanical Properties of Heated Twin-roll-cast Magnesium Strips -- The Morphology and Distribution of Al8Mn5 in High Pressure Die Cast AM50 and AZ91 -- Study on the Production of Metallic Magnesium from Nickel - Containing Serpentine -- Fabrication of Mg(OH)2 by Electrolysis Using MgCl2 Aqueous Solution -- An Experimental Study on Penetration Resistance Characteristics of Full Production Scale Magnesium Alloy AMX602 -- Experimental Study on the Reversion Reaction between Magnesium and CO Vapor in the Carbothermic Reduction of Magnesia under Vacuum -- Study on Metal Smelting Process under Microwave Irradiation -- Thermogravimetric Analysis of Simultaneous Decomposition and Formation of MgB2 -- Dislocations in Mg Alloys with Rare-earth Element Addition -- Microstructure, Mechanical Properties and Deformation Behavior of Mg-Gd-Y-Zn-Zr Alloy -- Twin-slip Interaction at Low Stress Stage Deformation in an AZ31 Mg Alloy -- In-situ Neutron Diffraction and Acoustic Emission during the Biaxial Loading of AZ31 Alloy -- Acoustic Emission Study of High Temperature Deformation of Mg-Zn-Y Alloys with LPSO Phase -- Deformation and Recrystallization Mechanisms and their Influence on the Microstructure Development of Rare Earth Containing Magnesium Sheets -- Thermo-mechanical Treatment of Extruded Mg-1Zn Alloy: Cluster Analysis of AE Signals -- The effect of initial texture on deformation behaviors of Mg alloys under Erichsen test -- Measurement of Twin Formation Energy Barriers Using Nudged Elastic Band Molecular Statics -- Microstructure and Mechanical Properties of Mg-7.71Gd-2.39Nd-0.17Zr Alloy after the Different Heat Treatments -- Superplasticity in a Chip-consolidated Mg97Zn1Y2 Alloy with LPSO Phase -- Technological Solutions to Apply Magnesium Bulk Materials in Dynamic Bending and Axial Compression Load Cases -- Mechanical Properties of Thermo-mechanically Treated Extruded Mg-Zn-based Alloys -- Influence of Low Temperature Forging on Microstructure and Low Cycle Fatigue Behavior of Cast AZ31B Mg Alloy -- The Recrystallization and Grain Growth Behavior of Unalloyed Mg and a Mg-Al Alloy -- Strengthening of a Biodegradable Mg-Zn-Ca Alloy ZX50 after Processing by HPT and Heat Treatment -- Strain Heterogeneity Structures in Wrought Magnesium AZ31 under Reversed Loading -- Hot Forging Behavior of Mg-8Al-4Ba-4Ca (ABaX844) Alloy and Validation of Processing Map -- Effect of Calcium on Resistance to Oxidation of Magnesium Alloys (AZ91) -- Evolution of Microstructure and Mechanical Properties during the Casting and Rolling of the ZEK100 Sheet -- Part 2. …”
Full-text access

8th RILEM International Conference on Mechanisms of Cracking and Debonding in Pavements

İçindekiler: “…. -- Evaluation of Fatigue Behavior of Aged Asphalt Mixtures Using the Simplified Viscoelastic Continuum Damage Model, by Babadopulos Lucas et al. -- GB5 Mix Design: a new approach for aggregate grading optimization for heavy duty flexible pavements, by Pouget Simon et al. -- Modelling the Hysteresis Loops of Hot Mix Asphalt, by Ahmed Taher -- Prediction of hot mix asphalt stiffness behavior by means of multiscale modeling, by Eberhardsteiner Lukas et al. -- Simulation of the asymptotic behaviour of bituminous mixtures using the Discrete Element Method, by Nguyen Minh Duc et al. -- Visco-plastic behavior of bituminous mixtures: experiments and modeling, by Gayte Pierre et al. -- Material Crack Characterization -- Effect of fiber grid reinforcement on crack initiation and propagation in asphalt concrete, by Gao Xiaofeng et al. -- Fracture Characterization Of Grid-Reinforced Asphalt Pavements, by Graziani Andrea et al. -- Impact of Loading Rate and Temperature on Tensile Strength of Asphalt Mixtures at Low Temperatures, by Steiner Daniel et al. -- Numerical correlation between low temperature SCB fracture and IDT strength of asphalt mixture using FEM analysis, by Cannone Falchetto Augusto et al. -- A Study of Longitudinal Crack Which Occurs to the Surface of Asphalt Pavement By Wheel Tracking Test, by Hirato Toshiaki et al. -- Effect Of Ageing And Water Action On The Cracking Resistance Of Asphalt Mixtures, by López-Montero Teresa et al. -- Effect of stress singularity on the scaling law of asphalt mixture strength at low temperature, by Cannone Falchetto Augusto et al. -- Analysis Of Cracking Resistance Of Bituminous Mixtures Under Monotonic And Cyclic Loads, by Pérez-Jiménez Félix et al. -- Effects of ageing on warm mix asphalts with high rates of reclaimed asphalt pavement, by Perez-Martinez Miguel et al. -- Fracture Energy Evaluation Of "Interstitial Asphalt Mixtures", by Musetti Simone et al. -- Significance of Oxidative Aging on the Low Temperature Cracking Predictions in Asphalt Concrete Pavements, by Alavi Mohammad Zia et al. -- Viscoelastic properties of bituminous composites using multiscale heterogeneous numerical simulation and micromechanical analytical self-consistent model, by Fakhari Tehrani Fateh et al. -- Low Temperature Cracking Problem for Asphalt Pavements in Kazakhstan, by Teltayev Bagdat et al. -- Research of Cracks Formation At Transport Facilities Of Azerbaijan, by Vyrozhemsky Valeriy et al. -- Material Crack Propagation -- Crack Evolution of Asphalt Mixtures under Compressive Monotonic and Repeated Loads, by Zhang Yuqing et al. -- A Simple Fracture Model for Hot Mix Asphalt Based on Fundamental Fatigue Parameters, by Ahmed Taher et al. -- Low temperature cracking properties of asphalt mixtures containing rubber bitumen pellets, by Artamendi Ignacio et al. -- Reinforcement Of A Cracked Steel Plate Using CFRP Bonding, by Lepretre Emilie et al. -- Characterizing non-linear fatigue crack growth and size effect in plain concrete beams with a hybrid effective crack and cohesive zone model, by Chatti Karim et al. -- A new approach for the study of fatigue cracking phenomenon in bituminous mixtures, by Moreno-Navarro Fernando et al. -- Bump formation on a semi-rigid pavement: interpretation and modeling using the Thick Level Set (TLS) approach for damage growth, by Chupin Olivier et al. -- Modelling of the fatigue damage of geogrid reinforced asphalt concrete, by Chazallon Cyrille et al. -- Predicting the performance of SAMI systems, by Thom Nick et al. -- Reflective cracking in asphalt overlays reinforced with geotextiles, by Leiva-Padilla Paulina et al. -- Thermal Crack Mechanisms -- Understanding the effects of ageing and temperature on the fatigue cracking resistance of bituminous mixtures, by Moreno-Navarro Fernando et al. -- Multiplicative viscoelastic-viscoplastic damage-healing model for Asphalt-Concrete materials, by Balieu Romain et al. -- Self-healing of dense asphalt concrete by two different approaches: electromagnetic induction and infrared radiation, by Ajam Harith et al. -- Mechanisms in Healing of Bitumen and the Impact of Normal Force, by Leegwater Greet et al. -- Assessment of Healing Properties of Asphalt Mixtures, by Isailovic Ivan et al. -- Material Crack Performance -- Cracking Performance Of Lower Asphalt Binder Coarse Graded Hot Mix Asphalt Mixes, by Dave Eshan et al. -- Combined Effect of SBS and Devulcanized Rubber (DVR) Modification on Performance Grade and Fatigue Cracking Resistance of Asphalt Binders, by Kocak Salih et al. -- Determining the allowable content of RAP binder in HMA with regard to fatigue resistance, by Riccardi Chiara et al. -- Effect Of Bitumen Type And Content On The Cracking Resistance Of Asphalt Mixtures At Different Temperatures, by Miró Rodrigo et al. -- Effects of Recycled Shingle and Virgin Asphalt BinderMixing on Mixture Performance, By Hill Brian et al. -- Impact Of Additives On The Cracking Resistance Of Asphalt Mixtures, by Sebaaly Peter et al. -- Mixture and Production Parameters Affecting Cracking Performance of Mixtures with RAP and RAS, by Rahbar-Rastegar Reyhaneh et al. -- Shrinkage Characteristics of Alkali-activated Slag Mortar with SAP, by Choi Youngcheol et al. -- The Impact Of Homogeneity Of High Modulus Asphalt Concrete Layer On Low-Temperature Cracking Of Asphalt Pavement, by Judycki Jozef et al. -- The Influence Mineral Additions On The Failure Properties Of Bitumen Emulsion Mortars, by Godenzoni Carlotta et al. -- Structural Crack Characterisation -- Influence of SAMI on the performance of reinforcement grids, by Arraigada Martin et al. -- Investigating SAMI system performance through pilot-scale testing, by Thom Nick et al. -- Fast and easy road renovation through a steel based anti-reflective cracking interlayer for asphalt overlays, by Vervaecke Frederik et al. -- Reflective Cracking Included Into Routine Design Of New Asphaltic Pavements, by Schrader Jeroen et al. -- M4-5n numerical solution using the Mixed FEM, validation against the Finite Difference Method, by Nasser Hanan et al. -- Pavement Fatigue Performance -- A Comprehensive Study About Stresses In Upside-Down Pavements, by Pessa Fabbri Glauco Tulio et al. -- Developing An Indicator For Fatigue Cracking In Hot Mix Asphalt Pavements Using Viscoelastic Continuum Damage Principles, by David J. …”
Full-text access

Ancient Engineers' Inventions Precursors of the Present / Yazar: Rossi, Cesare, Russo, Flavio

İçindekiler: “…Measuring Mass -- Introduction -- 1.1 The balance scale -- 1.2 The steelyard balance -- Observations -- 2 Measuring Distance and Slope -- Introduction -- 2.1 Jacob's staff -- 2.2 Range finders -- 2.3 The Astrolabe -- 2.4 The dioptre by Heron -- 2.5 The ancient odometers -- Observations -- Measuring a building height by an astrolabe -- Measuring the distances by the groma and by the surveyor's cross -- 3 Measuring Time -- Introduction -- 3.1 The sundial -- 3.2 Water clocks -- Observations -- 4 Orientation -- Introduction -- 4.1 The Sundial Compass -- 4.2 The Chinese South-Pointing Chariot Sundial Compass -- 4.3 The Windrose and the Magnetic Compass -- 5 Ancient Computation Devices -- Introduction -- 5.1 The Abacus -- 5.2 The Mesolabio -- 5.3 The Mechanism of Antikitera -- Observations -- 6 The Natural Energy Used In Antiquity -- Introduction -- 6.1 Energy from man -- 6.2 Energy from animals -- 6.3 The capstan -- 6.4 The treadwheel -- 6.5 Rough evaluation of the power from a wind motor -- 6.6 Rough evaluation of the power from a waterwheel -- 7 Wind Motors -- Introduction -- 7.1 The wind mills -- 7.2 Wings on the sea: the sails -- 7.3.3 The Flettner rotor -- Observations -- 8 Hydraulic Motors -- Introduction -- 8.1 Water wheels with vertical axis -- 8.2 Water wheels with horizontal axis -- 8.3 The floating mill -- 8.4 Water wheels in the Middle Ages and the Renaissance -- Observations -- 9 Refrigeration and Heating -- 9.1 Air Cooling with Wind Towers -- 9.2 The production of ice -- 9.3 Nero's Sherbet -- 9.3 Wheat Pits -- 9.4 Heating and Thermal Baths -- 9.5 Energy Saving: the Sun Chimney Heating and Thermal Baths -- 10 The Production Of Water -- 10.1 The Air Well -- 10.2 The DewBasin -- 10.3 The Qanat -- 10.4 Distillation -- 11 Lifting Water -- Introduction -- 11.1 The early devices -- 11.2 The Archimedes' screw -- 11.3 Norias -- 11.4 Pumps -- Observations -- 12 Adduction and Distribution of Water -- Introduction -- 12.1 Open ducts -- 12.2 Penstocks -- 12.3 The great cisterns -- 12.4 Water distribution systems -- 12.5 Pipes -- 12.6 Valves -- 12.7 Hydraulic mining -- Observations -- 13 Underwater Activities -- Introduction -- 13.1 Scuba divers -- 13.2 Diving bell -- 14 Transports -- Introduction -- 14.1 Roman charts -- 14.2 Railed cargo -- 14.3 The rails of Pompei -- 14.4 Ancient self-propelled vehicles -- 14.5 Early ball bearings -- 14.6 Transport on water -- 14.7 Cableways -- 14.10 The dawn of the flight in the antiquity -- Observations -- 15 Telecommunications -- Introduction -- 15.1 Acoustic -- 15.2 Carrier pigeons -- 15.3 Optical telecommunication systems -- 15.4 Lighthouses -- 15.5 The water telegraph -- Observations -- 16 Medicine and Health -- Introduction -- 16.1 Medical Assistance provided to Legionnaires -- 16.2 Reconstructive Plastic Surgery -- 16.3 Early Penicillin -- 16.4 The Beginning of Biological Warfare -- 17 Secondary Motors -- Introduction -- 17.1 Cranes and tackle -- 17.2 Gravity driven elevators -- 17.3 Siege towers -- 17.4 The trebuchet -- 17.5 Flexion elastic motors -- 17.6 Torsion elastic motors -- 17.7 Throwing machines operated by torsion motors -- 17.8 Mechanics of the throwing machines -- 17.9 Pneumatic motors -- 17.10 Small spring motors -- 17.11 Ancient steam engines -- Observations -- 18 Spinnind and Weaving -- Introduction -- 18.1 The dawn of spinning and weaving -- 18.2 The spinning wheel -- 18.3 The mechanical spinning -- 18.4 The automatic weaving -- Observations -- 19 Some Applications of Fire -- Introduction -- 19.1 Fire ignition -- 19.1.2 Optical flints -- 19.2 Marine fire - the Roman candle -- 19.3 Wind lanterns -- 19.4 Fire for warming -- 19.5 Fire for warfare -- 19.6 The protection from fire: asbestos -- 20 Automata (Towards automation androbots) -- Introduction -- 20.1 The Hellenistic Age -- 20.2 The Middle Ages -- 20.3 The Renaissance -- 20.4 The XVIII Century -- 20.5 The XIX Century -- 20.6 Automata of the Far East -- 20.7 Between the two millenniums -- Observations -- 21 Some Ancient Building Techniques -- Introduction -- 21.1 Stone buildings -- 21.2 Concrete Buildings -- 21.3 Considerations on the polygonal work -- 21.4 Earthquake-resistant buildings with wooden ribs -- 21.5 Seismic isolators -- 21.6 Consideration on ancient concrete -- Subject Index. .…”
Full-text access

High performance polymers and their nanocomposites /

İçindekiler: “…<P>Preface xv</p> <p><b>1 High-Performance Polymer Nanocomposites and Their Applications: State of Art and New Challenges 1<br /></b><i>PM Visakh</i></p> <p>1.1 Liquid Crystal Polymers 1</p> <p>1.2 Polyamide 4, 6, (PA4,6) 3</p> <p>1.3 Polyacrylamide 4</p> <p>1.4 Effect of Nanostructured Polyhedral Oligomeric Silsesquioxone on High Performance Poly(urethane-Imide) 5</p> <p>1.5 Thermoplastic Polyimide 5</p> <p>1.6 Performance Properties and Applications of Polytetrafluoroethylene (PTFE) 7</p> <p>1.7 Advances in High-Performance Polymers Bearing Phthalazinone Moieties 9</p> <p>1.8 Poly(ethylene Terephthalate)-PET and Poly(ethylene Naphthalate)-PEN 11</p> <p>1.9 High-Performance Oil Resistant Blends of Ethylene Propylene Diene Monomer (EPDM) and Epoxydized Natural Rubber (ENR) 14</p> <p>1.10 High Performance Unsaturated Polyester/f-MWCNTs Nanocomposites Induced by F- Graphene Nanoplatelets 15</p> <p><b>2 Liquid Crystal Polymers 27<br /></b><i>Andreea Irina Barzic, Raluca Marinica Albu and Luminita Ioana Buruiana </i></p> <p>2.1 Introduction and History 27</p> <p>2.2 Polymerization 29</p> <p>2.2.1 Synthesis of Lyotropic LC Polymers 30</p> <p>2.2.2 Synthesis of Thermotropic LC Polymers 31</p> <p>2.3 Properties 32</p> <p>2.3.1 Rheology 32</p> <p>2.3.2 Dielectric Behavior 35</p> <p>2.3.3 Magnetic Properties 36</p> <p>2.3.4 Mechanical Properties 36</p> <p>2.3.5 Phases and Morphology 39</p> <p>2.4 Processing 41</p> <p>2.4.1 Injection Molding 41</p> <p>2.4.2 Extrusion 42</p> <p>2.4.3 Free Surface Flow 43</p> <p>2.4.4 LC Polymer Fiber Spinning 44</p> <p>2.5 Blends Based on Liquid Crystal Ppolymers 44</p> <p>2.6 Composites of Liquid Crystal Polymers 46</p> <p>2.7 Applications 49</p> <p>2.7.1 LC Polymers as Optoelectronic Materials 49</p> <p>2.7.2 Liquid Crystalline Polymers in Displays 50</p> <p>2.7.3 Sensors and Actuators 51</p> <p>2.8 Environmental Impact and Recycling 52</p> <p>2.9 Concluding Remarks and Future Trends 54</p> <p>Acknowledgment 54</p> <p><b>3 Polyamide 4,6, (PA4,6) 59<br /></b><i>Emel Kuram and Zeynep Munteha Sahin</i></p> <p>3.1 Introduction and History 59</p> <p>3.2 Polymerization and Fabrication 60</p> <p>3.3 Properties 69</p> <p>3.4 Chemical Stability 72</p> <p>3.5 Compounding and Special Additives 72</p> <p>3.6 Processing 73</p> <p>3.7 Applications 83</p> <p>3.8 Blends of Polyamide 4,6, (PA4,6) 84</p> <p>3.9 Composites of Polyamide 4,6, (PA4,6) 89</p> <p>3.10 Nanocomposites of Polyamide 4,6, (PA4,6) 90</p> <p>3.11 Environmental Impact and Recycling 94</p> <p>3.12 Conclusions 98</p> <p><b>4 Polyacrylamide (PAM) 105<br /></b><i>Małgorzata Wiśniewska</i></p> <p>4.1 Introduction and History 105</p> <p>4.2 Polymerization and Fabrication 107</p> <p>4.3 Properties 110</p> <p>4.4 Chemical Stability 111</p> <p>4.5 Compounding and Special Additives  112</p> <p>4.6 Processing  113</p> <p>4.7 Applications  114</p> <p>4.8 Blends of Polyacrylamide  116</p> <p>4.9 Composites of Polyacrylamide  118</p> <p>4.10 Nanocomposites of Polyacrylamide  119</p> <p>4.11 Environmental Impact and Recycling  121</p> <p>4.12 Conclusions  122</p> <p><b>5 Effect of Nanostructured Polyhedral Oligomeric Silsesquioxone on High Performance Poly(urethane-imide) 133<br /></b><i>Dhorali Gnanasekaran</i></p> <p>5.1 Introduction 134</p> <p>5.2 Experimental 136</p> <p>5.3 Results and Discussion 138</p> <p>5.4 Conclusions 145</p> <p><b>6 Thermoplastic Polyimide (TPI) 149<br /></b><i>Xiantao Feng and Jialei Liu</i></p> <p>6.1 Introduction and History 149</p> <p>6.2 Polymerization and Fabrication 150</p> <p>6.2.1 Thermoplastic Polyimides Based on BEPA 150</p> <p>6.2.2 Thermoplastic Polyimides based on PMDA 153</p> <p>6.2.3 Thermoplastic Polyimides Based on BTDA 154</p> <p>6.2.4 Thermoplastic Polyimides Based on ODPA 157</p> <p>6.2.5 Thermoplastic Polyimides Based on BPDA 157</p> <p>6.2.6 Thermoplastic Copolyimides 158</p> <p>6.3 Properties 160</p> <p>6.3.1 TPI Based on BEPA 160</p> <p>6.3.2 Thermoplastic Polyimides based on PMDA 163</p> <p>6.3.3 TPI Based on ODPA 163</p> <p>6.3.4 Thermoplastic Polyimides Based on BPDA 168</p> <p>6.3.5 Thermoplastic Copolyimides 170</p> <p>6.4 Chemical Stability 170</p> <p>6.4.1 Hydrolytic Stability 170</p> <p>6.4.2 Oxidative Stability 174</p> <p>6.5 Compounding 175</p> <p>6.5.1 Chloromethylation 175</p> <p>6.5.2 Sulfonation 178</p> <p>6.5.3 Phosphorylation 178</p> <p>6.5.4 Bromination 178</p> <p>6.5.5 Arylation 181</p> <p>6.6 Processing 181</p> <p>6.6.1 Injection Molding 181</p> <p>6.6.2 Compression Molding 182</p> <p>6.6.3 Extrusion Molding 184</p> <p>6.6.4 Coating 184</p> <p>6.6.5 Spinning [40] 186</p> <p>6.7 Applications 186</p> <p>6.7.1 Membranes 186</p> <p>6.7.2 Adhesives 188</p> <p>6.7.3 Composites 189</p> <p>6.7.3.1 Skybond 190</p> <p>6.7.4 Engineering Plastics 190</p> <p>6.7.4.1 VESPEL Plastics 190</p> <p>6.7.4.2 ULTEM Plastics [48, 49] 191</p> <p>6.7.4.3 AURUM Plastics [50] 192</p> <p>6.7.4.3 Ratem Plastics [51] 192</p> <p>6.8 Blends of Thermoplastic Polyimide (TPI) 193</p> <p>6.8.1 TPI Blends with TPI 193</p> <p>6.8.2 Polyamic Acid Blending 195</p> <p>6.9 Composites of Thermoplastic Polyimide (TPI) 196</p> <p>6.9.1 LaRC Composites 197</p> <p>6.9.2 Skybond 202</p> <p>6.9.3 PAI Polyamide-Imide Composites 205</p> <p>6.10 Nanocomposites of Thermoplastic Polyimide (TPI) 208</p> <p>6.10.1 TPI/silver Nanocomposite 208</p> <p>6.10.2 TPI/Fe-FeO Nanocomposite 210</p> <p>6.10.3 TPI/Carbon Nanocomposites 211</p> <p>6.10.4 TPI/CF/TiO2 Nanocomposite 214</p> <p>6.11 Environmental Impact and Recycling 214</p> <p>6.12 Conclusions 215</p> <p><b>7 Performance Properties and Applications of Polytetrafluoroethylene (PTFE) -- A Review 221<br /></b><i>E. …”
Full-text access

Challenges in Mechanics of Time Dependent Materials, Volume 2 Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics  /

İçindekiler: “…1 Cracking and Durability of Composites in a Marine Environment -- 2 Analyses of Nanoscale to Microscale Strength and Crack-tip Stresses Using Nanomechanical Raman Spectroscopy in In 617 -- 3 High Creep Resistance of Titanium Aluminides Sintered by SPS -- 4 An Investigation of the Temperature and Strain-Rate Effects on Strain-to-Failure of UHMWPE Fibers -- 5 Keynote Life Prediction of CFRP Laminates based on Accelerated Testing Methodology -- 6 Rate Dependent Interfacial Properties Using the JKR Experimental Technique -- 7 Bio-based Composites as Thermorheologically Complex Materials -- 8 Viscoelastic Properties of Longitudinal Waves in a Hollow Cylinder -- 9 Evaluation of Viscoelastic Characteristics Under High Strain Rate by Impact Test -- 10 Phase Changes in Embedded HMX in Response to Periodic Mechanical Excitation -- 11 Effect of Crystal Density on Dynamic Deformation Behavior of PBX -- 12 Strain Rate Dependent Failure of InterfacesExamined via Nanoimpact Experiments -- 13 A Theory of Coupled Anisothermal Chemomechanical Degradation for Finitely-deforming Composite Materials with Eshelbian Interactive Forces -- 14 Effect Of Temperature And Moisture on the Mechanical Properties of Fiber Reinforced Nylon 6 Composites -- 15 Using Hydrostatic Pressure to Maximize Frequency Dependent Damping Properties of Thermoplastic Polyurethane -- 16 Impact Of Hydro-Mechanical Loadings On Rupture Process In Wood Material -- 17 2D Transient Viscoplastic Model for Dislocation Generation of SiC by PVT Method -- 18 Temperature-Dependent Small Strain Plasticity Behavior of 304L Stainless Steel -- 19 Time and Temperature Creep Behaviour Measurement of Al and Al-Mg Alloy Thin Films Using Pressure Bulge Tests -- 20 Multifunctional Wings with Flexible Batteries and Solar Cells for Robotic Birds -- 21 Rate-Dependent Constitutive Model Development of PC/ABS Material -- 22 Comprehensive Viscoelastic Properties Characterization of EMC Using FBG Sensor -- 23 Back Stress in Modeling the Response of PEEK and PC -- 24 Dynamic Testing and Constitutive Modelling of NBR Rubbers -- 25 A New Temperature-dependent Storage Modulus Model of Epoxy Resin -- 26 Identification of Plastic Behaviour of Sheet Metals in High Strain Rate Tests -- 27 Characterization of Fiber Composites at Lower Strain Rates.…”
Full-text access

Introduction to Refractories for Iron- and Steelmaking. Yazar: Biswas, Subir

İçindekiler: Full-text access

Advances in Shape Memory Materials In Commemoration of the Retirement of Professor Hisaaki Tobushi /

İçindekiler: “…Tobushi -- 9 Fatigue property and enhancement of fatigue life of TiNi shape memory alloys - An overview -- 10 Intelligent shape memory actuators -- 11 Structural and magnetic properties of magnetic shape memory alloys on Ni-Mn-Co-in self-standing films -- 12 Simultaneous measurement of continuum strain field and intermittent martensite band nucleation in single crystal Ni-Mn-Ga foils -- 13 Thermomechanical coupling and localization effects examined in shape memory alloys and polymers by fast and sensitive infrared camera -- 14 Anomalous Properties of TiNi processed by severe plastic deformation -- 15 Grain size effects on Young's modulus and hardness of nanocrystalline NiTi shape memory alloy -- 16 Grain size effects on wear resistance of nanocrystalline NiTi shape memory alloy -- 17 Experimental study of critical stresses of Fe-28Mn-6Si-5Cr SMA under various temperature conditions -- 18 Cyclic compressive responses of NiTi shape memory alloy-effects of loading frequency.…”
Full-text access

Magnesium Technology 2017

İçindekiler: “…Part 1: Magnesium Technology 2017: Keynote Session I -- Multi-scale Investigation on Yield "Symmetry" and Reduced Strength Differential in an Mg-Y Alloy -- Targeting High Impact R&D for Automotive Magnesium Alloys -- Magnesium Development as a Lightweight Material - In Competition with Other Structural Materials -- The Continued Quest for Low-Temperature Formability in Mg Alloys: Historical Developments and Future Opportunities -- Part 2: Magnesium Technology 2017: Alloy Development -- Using the Crystal Plasticity Approach to Parse the Effects of Alloying and Aging on the Mechanical Behavior of Wrought Mg Alloys -- Development of high-strength high-speed-extrudable Mg-Al-Ca-Mn alloy -- Development of ultra-high strength and ductile Mg-Gd-Y-Zn-Zr alloys by extrusion with forced-air cooling -- Effect of Extrusion Ratio on Microstructure and Resulting Mechanical Properties of Mg Alloys with LPSO Phase -- Mechanically Alloyed Magnesium Based Nanostructured Alloy Powders for Stent Applications -- Combined Effects of Grain Size Refinement and Dynamic Precipitation on Mechanical Properties of a New Magnesium -- Alloy -- Machinability Investigation in Micro-milling of Mg based MMCs with Nano-sized Particles -- Part 3: Magnesium Technology 2017: Solidification and Processing I -- Microsegregation in High Pressure Die Cast Mg Alloys -- Numerical simulations of TRC equipped with a core -- Growth of Al8Mn5 intermetallic in AZ91 -- Influence of CaO grain refiner addition on the microstructure and mechanical properties of as-cast Mg alloys -- Grain refinement of Mg and its alloy by inoculation of in-situ MgO particles -- Numerical study of magnesium production by Pidgeon process and pre-prepared pellets silicothermic process: comparison of heat transfer -- On the age hardening response of aluminum containing magnesium sheets with zinc or manganese (AZ- and AM series alloys) -- Performance evaluation of high-pressure die-cast magnesium alloys -- Simulation Study on Direct Desulfurization ofMolten Iron by Magnesium Vapor -- Part 4: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue I -- Twinning super dislocations to help understand strength -- Basal Dislocation Transmutation through {1012} Twin Boundaries -- Ductility Enhancement in Mg alloys by Anisotropy Engineering -- Modeling the effect of alloying elements in magnesium on deformation twin characteristics -- Simulating Discrete Twin Evolution in Magnesium using a Novel Crystal Plasticity Finite Element Model -- The effect of {10-12} twin boundary on the evolution of defect substructure -- Part 5: Magnesium Technology 2017: Solidification and Processing II -- Processing of Mg-sheet via Twin Roll Casting -- Effects of Mn and Zn Solutes on Grain Refinement of Commercial Pure Magnesium -- Experimental investigation of continuous magnesium production by carbothermal reduction -- Precipitation behavior of Mg-Al-Sn-Zn(-Na) alloys -- Study on the Direct Oxidation Thermal Decomposition of MagnesiumChloride byproduct in the Sponge Titanium -- Thermal decomposition kinetics of pre-prepared pellets for the novel silicothermic process -- Thermal Stability of Cryomilled Mg Alloy Powder -- Thermomechanical Processing of Thixomolded Alloys -- Part 6: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue II -- Dynamic behavior of an AZ31 alloy under varying strain rates and stress triaxialities -- Enhancing the tensile response of magnesium through simultaneous addition of aluminium and alumina nanoparticulates -- Effect of solutes additions on the microstructure and mechanical properties of cast Mg-Al based alloys -- Enhanced mechanical properties of extruded Mg-9mass%Al-1mass%Zn-2mass%Ca alloy -- Influence of strain path change on the microstructure and mechanical properties of duplex Mg-Li alloy -- Mechanical Properties and Deformation Mechanism of Mg-Y Alloy with Various Grain Sizes -- Microstructure and Mechanical Properties of High Pressure Die Cast Mg-Al-Sn-Si Alloys -- Microstructure and mechanical properties of an extruded Mg-1.58Zn-0.52Gd alloy -- Modelling Magnesium Alloys for Improved Isotropic and Symmetric Yield Behaviour -- Part 7: Magnesium Technology 2017: Solidification and Processing III and Magnesium-Rare Earth Alloys I -- Scaled-Up Fabrication of Thin-Walled ZK60 Tubing using Shear Assisted Processing and Extrusion (ShAPE) -- Biocompatible Magnesium Alloy ZNdK100 - Adaptation of Extrusion Parameters to Tailor the Mechanical Properties to Different Implant Applications -- Characterization of Semi-closed Die-Forged ZK60 Mg Alloy Extrusion -- Optimization of Nitrogen bubbling conditions for extruded Mg alloy with balanced mechanical properties -- Effects of Gadolinium and Neodymium Addition on Young's Modulus of Magnesium-based Binary Alloys -- Aging behavior of Mg alloys containing Nd and Y -- Variation of Rare Earth Elements in the Magnesium Alloy ME21 for the Sheet Production -- Phase stability and formation in Mg-Gd-Zn alloys - key data for ICME of Mg alloys -- Part 8: Magnesium Technology 2017: Corrosion -- An Electrochemical Investigation of Mg-Ni Hydrogen Storage Alloys by Mechanical Alloying -- Corrosion and creep resistance of thixomolded® magnesium alloys -- Corrosion Properties of Mg-6Al-0.3Mn-aSn-bZn Alloys -- Corrosion of magnesium-aluminum (Mg-Al) alloys - An interplay between Al content and CO2 -- Excimer Laser Processing of Al containing Mg Alloys for Improved Corrosion Resistance -- Effect of Al and Sn on discharge behavior of Mg alloy as anode for Mg-Air battery -- Utilization of a Partially Non-aqueous Electrolyte for the Spatial Mapping of Mg Corrosion using a model Mg-Al Electrode -- Voltammetric Studies of Extruded Pure Magnesium in Different Electrolytes and Its Corrosion Morphology -- Part 9: Magnesium Technology 2017: Magnesium-Rare Earth Alloys II -- Microstructure and mechanical properties of Mg-Zn-Gd alloys after rolling or extrusion processes -- A comparative study on the microstructure, mechanicalproperties, and hot deformation of magnesium alloys containing zinc, calcium and yttrium -- Addition of Holmium & Erbium and Hot-rolling effects on the Microstructure and Mechanical Properties of Mg-Li based Alloys -- Bonding environments in a creep-resistant Mg-RE-Zn alloy -- Microstructural and Numerical Investigation on the Shear Response of a Rare-Earth Magnesium Alloy Sheet -- Solute effect on strength and formability of Mg: A first-principle study -- Understanding on the role of rare earth elements in activation of slip in magnesium: An atomistic approach -- Stabilisation of disordered BCC phases in magnesium-rare earth alloys -- The Effects of Ca Addition on Microstructures and Mechanical Properties of Gravity Cast Mg-Zn-Y Alloy -- Part 10: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue III -- Microstructure and Texture Evolution during Hot Deformation of Cast-Homogenized ZK60 Magnesium Alloy -- Development of Texture during Tensile Test at Room Temperature -- Effect of Ca on the microstructure, texture and mechanical properties in Mg-Zn-Mn based alloy -- Evaluation of in vitro fatigue properties of biodegradable Mg-0.3at.…”
Full-text access

Proceedings of the International Conference on Martensitic Transformations: Chicago

İçindekiler: “…Novel Shape Memory Alloys -- Effect of heat-treatment conditions on microstructure and shape memory properties of Ti-4.5Al-3V-2Fe-2Mo alloy -- Porous Ni-Ti-Nb Shape Memory Alloys with Tunable Damping Performance Controlled by Martensitic Transformation -- Cryogenic Immersion Time Influence on Thermal and Mechanical Properties of a Ni48Ti52 Shape Memory Alloy -- Part 12. …”
Full-text access

Computational Methods in Earthquake Engineering Volume 3 /

İçindekiler: “…Improved Method for the Calculation of Plastic Rotation of Moment-Resisting Framed Structures for Nonlinear Static and Dynamic Analysis, by Kevin K.F. …”
Full-text access

TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings

İçindekiler: “…Mechanical Behavior at the Nanoscale IV -- Mechanical Properties of Rapidly Solidified Ni5Ge3 Intermetallic -- Part 29.…”
Full-text access

TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings

İçindekiler: “…Mechanical Behavior at the Nanoscale IV -- Mechanical Properties of Rapidly Solidified Ni5Ge3 Intermetallic -- Part 29.…”
Full-text access

Proceedings of the Second International Conference on Theoretical, Applied and Experimental Mechanics

İçindekiler: “…Msagati -- Deformation Model of [45]s Cross-Ply Fiber Reinforced Plastics Under Tension, by V.N.Paimushin, R.A.Kayumov, D.V.Tarlakovskii and S.A.Kholmogorov -- Segregation resistance, stiffness and toughness of CNTnanomodified self compacted concrete, by Myrsini Maglogianni, Panagiotis Danoglidis, Maria Falara and Maria S. …”
Full-text access

Natural Fibres: Advances in Science and Technology Towards Industrial Applications From Science to Market /

İçindekiler: “…Section I: Properties and Functionalities of Natural Fibres and Structures -- Fibre Science: Understanding how it works and speculating on its future -- Wool in Human Health and Well-Being -- Correlations between the physiochemical characteristics of plant fibres and their mechanical properties -- Influence of stem morphology and fibre stiffness on the loading stability of flax -- Young's modulus of plant fibres -- Characterization of Brazilian nut fibers -- Section II: New, Functional and Nano Dimensional Natural Fibres -- Brazilian Buriti Palm Fiber -- Degradation of dyes using plantain fibers modified with nanoparticles -- Removal of crude oil using a new natural fibre- Calotropis Procera -- Amazonian Tururi Palm Fiber Material -- Nanoindentation measurements of jute/polylactic acid composites -- Biomedical applications of nanocellulose -- Section III: Natural Fibre Reinforced Polymeric Composites -- A finite element analysis to validate the rule-of-mixtures for the prediction of the Young's modulus of composites with non-circular anisotropic fibres -- Effects of water ageing on the mechanical properties of flax and glass fibre composites: Degradation and reversibility -- Processing of wet preserved natural fibers with Injection molding compounding -- Fluorination as an effective way to reduce natural fibers hydrophilicity -- DSC analysis of in-situ polymerized poly(butylene terephthalate) flax fiber reinforced composites produced by RTM -- Parametric study on the manufacturing of biocomposite materials -- Mechanical properties of flax fibre reinforced composites -- Eco-friendly flax fibre/epoxy resin composite system for surfboard production -- The use of cellulose fibre wastes to increase the mechanical behaviour of biodegradable composites for automotive interior parts -- Section IV: Natural Fibre Reinforced Cementitious Composites -- Hemp fibres - A promising reinforcement for cementitious materials -- Tensile and bond characterization of natural fibers embedded in cementitious matrices -- Eco-efficient earthen plasters: The influence of the addition of natural fibers -- Section V: Innovative Applications of Natural Fibres -- Polylactic acid fibre based biodegradable stents and their functionalization techniques -- Optimization of a wood plastic composite to produce a new dynamic shading system -- Biodegradation of wool used for the production of innovative geotextiles designed to erosion control -- Renewable materials for stab resistance -- Hemp fibres from crops grown on reclaimed land for the production of sanitary mats -- Section VI: Market, Opportunities, Recycling and Sustainability Aspects of Natural Fibres -- Natural Fibres and the World Economy -- Wool as an heirloom: How natural fibres can reinvent value in terms of money, life-span and love -- Hemp cultivation opportunities and perspectives in Lithuania -- Review of wool recycling and reuse -- Brazilian scope of management and recycling of textile wastes -- Cotton dyeing with extract from renewable agro industrialbio-resources: A step towards sustainability.…”
Full-text access

Magnesium Technology 2018

İçindekiler: “…Magnesium Technology 2018 -- Magnesium Alloys: Challenges and Achievements in Controlling Performance, and Future Application Perspectives -- Solute/Stacking Fault Energies in Mg and Implications for Ductility -- Recent Developments in Magnesium Alloy Corrosion Research -- Towards Active Corrosion Protection of Mg Alloys Using Corrosion Inhibition Approaches -- Ni-P-MWNTs Composite Coatings on Magnesium Alloys AZ31 Part 1: MWNTs Content in Coating -- Ni-P-MWNTs Composite Coatings on Magnesium Alloys AZ31 Part 2: Tribological Behavior and MWNTs Content in Coating -- Adding Dimensions to the Immersion Testing of Magnesium Corrosion -- Effect of Fluoride Ion on the Microstructure and Properties of Permanganate Conversion Coating on AZ91D Magnesium Alloy -- Corrosion Characteristics of Two RE Containing Magnesium Alloys -- Surface and interfacial energies of Mg17Al12-Mg system -- Effect of Ca on the Microstructure and Mechanical Properties in Mg Alloys -- Investigationof Grain Refinement Method for AZ91 Alloy using Carbide Inoculation -- Experimental Study of the Solidification Microstructure in the Mg-rich Corner of Mg-Al-Ce System -- Material Design for Enhancing Toughness of Mg Alloy and Application for Biodegradable Devices -- Influences of Yttrium Content on Microstructure and Mechanical Properties of As-cast Mg-Ca-Y-Zr Alloys -- Strengthening and Toughening Behaviors of the Mg-9Al Alloy Containing Oxygen Atoms -- Investigations on Microstructure and Mechanical Properties of Non-flammable Mg-Al-Zn-Ca-Y Alloys -- Developmentof BioMg 250 Bioabsorbable Implant Alloy -- The Electrolytic Production of Magnesium from MgO -- Empirical Examination of the Formation of Mechanical Properties of Heated Twin-roll-cast Magnesium Strips -- The Morphology and Distribution of Al8Mn5 in High Pressure Die Cast AM50 and AZ91 -- Study on the Production of Metallic Magnesium from Nickel - Containing Serpentine -- Fabrication of Mg(OH)2 by Electrolysis Using MgCl2 Aqueous Solution -- An Experimental Study on Penetration Resistance Characteristics of Full Production Scale Magnesium Alloy AMX602 -- Experimental Study on the Reversion Reaction between Magnesium and CO Vapor in the Carbothermic Reduction of Magnesia under Vacuum -- Study on Metal Smelting Process under Microwave Irradiation -- Thermogravimetric Analysis of Simultaneous Decomposition and Formation of MgB2 -- Dislocations in Mg Alloys with Rare-earth Element Addition -- Microstructure, Mechanical Properties and Deformation Behavior of Mg-Gd-Y-Zn-Zr Alloy -- Twin-slip Interaction at Low Stress Stage Deformation in an AZ31 Mg Alloy -- In-situ Neutron Diffraction and Acoustic Emission during the Biaxial Loading of AZ31 Alloy -- Acoustic Emission Study of High Temperature Deformation of Mg-Zn-Y Alloys with LPSO Phase -- Deformation and Recrystallization Mechanisms and their Influence on the Microstructure Development of Rare Earth Containing Magnesium Sheets -- Thermo-mechanical Treatment of Extruded Mg-1Zn Alloy: Cluster Analysis of AE Signals -- The effect of initial texture on deformation behaviors of Mg alloys under Erichsen test -- Measurement of Twin Formation Energy Barriers Using Nudged Elastic Band Molecular Statics -- Microstructure and Mechanical Properties of Mg-7.71Gd-2.39Nd-0.17Zr Alloy after the Different Heat Treatments -- Superplasticity in a Chip-consolidated Mg97Zn1Y2 Alloy with LPSO Phase -- Technological Solutions to Apply Magnesium Bulk Materials in Dynamic Bending and Axial Compression Load Cases -- Mechanical Properties of Thermo-mechanically Treated Extruded Mg-Zn-based Alloys -- Influence of Low Temperature Forging on Microstructure and Low Cycle Fatigue Behavior of Cast AZ31B Mg Alloy -- The Recrystallization and Grain Growth Behavior of Unalloyed Mg and a Mg-Al Alloy -- Strengthening of a Biodegradable Mg-Zn-Ca Alloy ZX50 after Processing by HPT and Heat Treatment -- Strain Heterogeneity Structures in Wrought Magnesium AZ31 under Reversed Loading -- Hot Forging Behavior of Mg-8Al-4Ba-4Ca (ABaX844) Alloy and Validation of Processing Map -- Effect of Calcium on Resistance to Oxidation of Magnesium Alloys (AZ91) -- Evolution of Microstructure and Mechanical Properties during the Casting and Rolling of the ZEK100 Sheet -- Part 2. …”
Full-text access

Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications

İçindekiler: “…Microstructure and Behavior -- Characterization and Modeling of Deformation Mechanisms in Ni-base Superalloy 718 -- Characterization of Nano-Scale' Phase in HPT-Disk P/M Superalloys HGN300 by Small-Angle X-ray Scattering -- Development of an Automated Property Simulation Tool for Direct Aged Alloy 718 Engine Disk Forgings -- Microstructure Dependence of Dynamic Impact Behaviour of ATI 718Plus Superalloy -- 3D Stochastic Modelling of Microstructure Evolution during Solidification of Alloy 718 -- Analysis of microporosity-dependent fatigue crack behavior in Alloy 718 by using synchronic radiation X-ray CT and FEM -- Characterisation of the Initial Stages of Dynamic Recrystallisation in ATI 718Plus® -- Compositional Design and Mechanical Properties of INCONEL® Alloy 725 Variants -- Constrained Lattice Misfit Measurement in Bulk Inconel 718 Using High Resolution Neutron Diffraction -- Dependence of Creep Strength on Cooling Rate after Subsolvus Solution Treatment in Wrought Alloy 718 -- Depletion Induced Grain Growth in Alloy 751 after Long Term Aging and Its Effect on Fatigue -- Effect of Grain-Boundary Fe2Nb Phase on Stress-assisted Grain-Boundary Oxidation Behavior in Novel Austenitic Heat-resistant Steel of Fe-20Cr-35Ni-2.5Nb -- Effect of Heat Treatment on Microstructure and Mechanical Properties of VDM Alloy 780 Premium -- Effect of Homogenization on Creep of Additive Manufactured Inconel 718 -- Effects of HIP and Heat Treatment on Microstructure, Fracture Toughness and Fatigue Crack Growth Behavior of SLM-Based IN718 -- Effects of Phosphorus Addition on Creep Properties of Wrought Gamma-Prime Strengthened Ni-based Superalloy -- Enhanced Strength of Inconel 718 by High Rate Severe Plastic Deformation -- Evaluation of the Stress-Strain State in Alloy 718 after Hydrogen Charging -- Experimental TTT Diagram of HAYNES 282 Alloy -- Influence of Residual Stresses on Aging Precipitation Behavior of Alloy 718 -- Machine learning to optimize additive manufacturing parameters for laser powder bed fusion of Inconel 718 -- Mechanical Performance of Various INCONEL® 740/740H Alloy Compositions for Use in A-USC Castings -- Microstructural Characterization and Mechanical Properties of Rene 65Precipitates -- Microstructure Development in Track-by-track Melting of EBM-manufactured Alloy 718 -- Modeling Tensile, Compressive, and Cyclic Response of Inconel 718 Using a Crystal Plasticity Model Incorporating the Effects of Precipitates -- Novel Fractgraphy of Ni-based Alloy by SEM/EBSD Method -- On the Effect of Alloying Additions to the Ni-Cr-Al-Nb Dual-Superlattice Gamma-Gamma Prime-Gamma Double Prime Superalloys -- Optimization of the Forging Process Window in Respect of AGG, IGG and Direct Age Effect in Alloy 718 Engine Disks -- Oxidation-assisted cracking at 650 °C in superalloy 718 manufactured by Laser Beam Melting: Effect of temperature and strain rate -- Precipitation Behavior and Mechanism of Sigma Phase in Alloy 925 -- Quantitative Texture Prediction of Epitaxial Columnar Grains in Inconel 718 Processed by Additive Manufacturing -- Research of Twin Induced LCF Cracking for 718 Alloy Using In-Situ Observation -- Shear Spinning of Nickelbased Superalloy 718 -- Strain Controlled Low Cycle Fatigue Behaviors of U720Li Disk Superalloy above 700 °C -- Stress Relaxation Behavior Comparison of Typical Nickel-base Superalloys for Fasteners -- Study of the Oxidation Assisted Intergranular Cracking Mechanism on a Ni-base Superalloy -- The Effect of Grain Size on the Dwell Fatigue Crack Growth Rate of Alloy 718Plus -- Thermal Processing Design of Cast INCONEL® Alloy 740H for Improved Mechanical Performance -- Part 6. …”
Full-text access

Dynamic Behavior of Materials, Volume 1 Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /

İçindekiler: “…Latest Results for Elasto-plastic Identification at High Rates using Inertial Impact -- Chap17. …”
Full-text access

Uhlig's corrosion handbook /

İçindekiler: “…Controlling Flow Effects on Corrosion / K D Efird -- Erosion₆Corrosion: Recognition and Control / J Postlethwaite, S Ne₍ic -- Using Plastics, Elastomers, and Composites for Corrosion Control / P R Khaladkar -- Corrosion Control of Steel by Organic Coatings / C H Hare -- Selection and Use of Coatings for Underground or Submersion Service / R Norsworthy -- Engineering of Cathodic Protection Systems / J H Fitzgerald -- Stray-Current Analysis / J H Fitzgerald -- Corrosion Inhibitors / S Papavinasam -- Computer Technology for Corrosion Assessment and Control / S Srinivasan -- Testing for Corrosion Resistance. …”
Full-text access