Arama Sonuçları - (glass OR class) fibers testing.

Crashworthiness of composite thin-walled structural components / Yazar: Mamalis, A.G

Konular:

Crashworthiness of composite thin-walled structural components /

Konular:

Advances in Natural Fibre Composites Raw Materials, Processing and Analysis /

İçindekiler: “…Potential of Hemp in Thermoplastic Biocomposites- The effect of Fibre Structure -- Industrial Hemp Transformation for Composite Applications: Influence of Processing Parameters on the Fibre Properties -- Use of Sugar Cane Fibers For Composites- A Short Review -- Impregnated Fibre Bundle Test for Natural Fibres Used in Composites -- Evaluation of the Extraction Efficiency of Enzymatically Treated Flax Fibers -- Influence of Coupling Agent on the properties of Polypropylene Composites Reinforced with Palm Fibers -- Effect of Time-dependent Process Temperature Variation During Manufacture of Natural-Fiber Composites -- About nonlinear behavior of unidirectional plant fibre composite -- Investigating the transient response of hybrid composite materials reinforced with flax and glass fibres -- The Response of Manicaria Saccifera Natural Fabric Reinforced PLA Composites to Impact by Fragment Simulating Projectiles -- Advances in natural fibre reinforced thermoplastic composite manufacturing: Effect ofinterface and hybrid yarn structure on composite properties -- Environmental Friendly Thermoplastic Composite Laminates reinforced with Jute Fabric -- Selection of Chart of Flame Retardants for Natural Fiber Polymer Composites -- Mechanical Properties of Raffia Fibres Reinforced Geopolymer Composites -- Sustainable composites based on pine resin and flax fibre -- Development and Characterization of Microcrystalline Cellulose Based Novel Multi-Scale Biocomposites -- Investigation of Mechanical and Thermomechanical Properties of Nanocellulose Coated Jute/Green Epoxy Composites -- The Use of Sedimentation for the Estimation of Aspect Ratios of Charged Cellulose Nanofibrils -- Electrical Conductivity of PLA Films Reinforced with Carbon Nano Particles from Waste Acrylic Fibers -- Allocation in the Life Cycle Assessment (LCA) of Flax Fibres for the Reinforcement of Composites -- Applications of Building Insulation Products Based on Natural Wool and Hemp Fibers -- Hemp-Clay Concretes for EnvironmentalBuilding - Features that attribute to drying, stabilization with lime, water uptake and mechanical strength -- The Use of Hemp in Building Components for the Development of A Modular House in a Rural Area of Cauca-Colombia.                                     .…”
Full-text access

Polymer composites

İçindekiler: “…1.3.4 Thermodynamic Methods1.4 New Challenges and Opportunities; References; 2 Shock and Impact Response of Glass Fiber-Reinforced Polymer Composites; 2.1 Introduction; 2.2 Analytical Analysis; 2.2.1 Wave Propagation in Elastic-Viscoelastic Bilaminates; 2.2.2 Solution at Wave Front: Elastic Precursor Decay; 2.2.3 Late-Time Asymptotic Solution; 2.3 Plate-Impact Experiments on GRPs; 2.3.1 Material: Glass Fiber-Reinforced Polymer; 2.3.2 Plate-Impact Shock Compression Experiments: Experimental Configuration.…”
Full-text access

Strain-Hardening Cement-Based Composites SHCC4 /

İçindekiler: “…Material Design and Mechanical Testing -- High Performance Fiber Reinforced  Materials: Historic  Perspective and Glance in the Future,  by Surendra Shah, Yuan Gao.…”
Full-text access

Dynamic Behavior of Materials, Volume 1 Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /

İçindekiler: “…Mechanical Behavior and Deformation Mechanisms of Mg in Shear Using In-Situ Synchrotron Radiation X-Ray Diffraction -- Chapter 54.Developing an Alternative to Roma Plastilina #1 as a Ballistic Backing Material for Body Armor Evaluation -- Chapter 55.IBI Test for High Strain Rate Tensile Testing of Adhesives -- Chapter 56.Modified Digital Gradient Sensors with Higher Measurement Sensitivity for Evaluating Stress Gradients in Transparent Solids -- Chapter 57.Quantitative Visualization of Sub-micron Deformations and Stresses at Sub-microsecond Intervals in Soda-lime Glass Plates -- Chapter 58.Microstructural Effects in the High Strain Rate Ring Fragmentation of Copper -- Chapter 59.Uncertainties in Low-Pressure Shock Experiments on Heterogeneous Materials -- Chapter 60.Effects of Liquid Viscosity on Wave Propagation Through Submerged Granular Media -- Chapter 61.Numerical Study of the Failure Mechanism of Ceramics during Low Velocity Impact Used In Protective Systems -- Chapter 62.Influence of High Strain Rate Transverse Compression on the Tensile Strength of Polyethylene Ballistic Single Fibers -- Chapter 63.The Utility of 3D Digital Image Correlation for Characterizing High-Rate Deformation -- Chapter 64.Characterization of Dynamic Deformation and Failure of Novel Light Weight Steel Alloy -- Chapter 65.Dynamic Fragmentation of MAX Phase Ti3SiC2 from Edge-On Impact Experiments -- Chapter 66.Application of High-speed DIC to Study Damage of Thin Membranes under Blast.…”
Full-text access

Dynamic Behavior of Materials, Volume 1 Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /

İçindekiler: “…1 Atomistic Simulation of a Two-Dimensional Polymer Tougher Than Graphene -- 2 Transverse Compression Response of Ultra-high Molecular Weight Polyethylene Single Fibers -- 3 Morphology and Mechanics of the Young Minipig Cranium -- 4 Dynamic Characterization of Nitronic 30, 40 and 50 Series Stainless Steels by Numerical Analysis -- 5 Mechanical Response of T800/F3900 Composite at Various Strain Rates -- 6 Full-Field Temperature and Strain Measurement in Dynamic Tension Tests on SS 304 -- 7 Dynamic Fracture Response of a Synthetic Cortical Bone Simulant -- 8 Fracture Response of Cross-Linked Epoxy Resins at High Loading Rate as a Function of Glass Transition Temperature -- 9 Measurement of Dynamic Response Parameters of an Underdamped System -- 10 Dynamic Penetration and Bifurcation of a Crack at an Interface in a Transparent Bi-Layer: Effect of Impact Velocity -- 11 Influence of Loading Rate Effects Fracture Strength of Individual Sand Particles -- 11 Arrested Compression Tests on two Types of Sand -- 12 Composite Plate Response to Shock Wave Loading -- 13 Initial Experimental Validation of an Eulerian Method for Modeling Composites -- 14 Characterization of High Strain Rate Dependency of 3D CFRP materials -- 15 High-strain Rate Compressive Behavior of a Clay under Uniaxial Strain State -- 16 Mesoscopic Modelling of High Performance Fiber Reinforced Concrete under Dynamic Loading -- 17 Comparison of Failure Mechanisms due to Shock Propagation in Forged, Layered, and Additive Manufactured Titanium Alloy -- 18 Instrumented Penetration of Metal Alloys during High-Velocity Impacts -- 19 Confined Underwater Implosions using 3D Digital Image Correlation -- 20 Response of Composite Cylinders Subjected to Near Field Underwater Explosions._ 21 Microstructural Effects on the Spall Properties of Al 5083: Equal-Channel Angular Extrusion (ECAE) plus Cold Rolling -- 23 Experimental Study of the Dynamic Fragmentation in Transparent Ceramic Subjected to Projectile Impact -- 24 Instrumented Projector forDynamic Testing -- 25 NIST Mini-Kolsky Bar: Historical Review -- 26 A General Approach to Evaluate the Dynamic Fracture Toughness of Materials -- 27 Which one has More Influence on Fracture Strength of Ceramics: Pressure or Strain Rate? …”
Full-text access

Characterization of Minerals, Metals, and Materials 2019

İçindekiler: “…Characterization of Polymer and Composite Materials -- Dynamic-mechanical Analysis of Epoxy Composites Reinforced with PALF Fibers -- Characterization of PCBs from Obsolete Computers Aiming the Recovery of Precious Metals -- IZOD Impact Test Comparative Analyzis of Epoxy and Polyester Matrix Composites Reinforced with Hemp Fibers -- Effect of Neomycin in PVP Hydrogel as Wound Dressing -- Comparative Mechanical Analysis of Epoxy Composite Reinforced with Malva/Jute Hybrid Fabric by Izod and Charpy Impact Test -- Comparison Between Epoxy Matrix Composites Reinforced with Ramie Fabric under Pressure and Vacuum -- Charpy Impact Test in Polyester Matrix Composites Reinforced With Hybrid Blanket of the Jute and Malva Fibers -- Part 7. …”
Full-text access

Characterization of Minerals, Metals, and Materials 2018

İçindekiler: “…Characterization of Polymer and Composite Materials -- Dynamic-mechanical Analysis of Epoxy Composites Reinforced with PALF Fibers -- Characterization of PCBs from Obsolete Computers Aiming the Recovery of Precious Metals -- IZOD Impact Test Comparative Analyzis of Epoxy and Polyester Matrix Composites Reinforced with Hemp Fibers -- Effect of Neomycin in PVP Hydrogel as Wound Dressing -- Comparative Mechanical Analysis of Epoxy Composite Reinforced with Malva/Jute Hybrid Fabric by Izod and Charpy Impact Test -- Comparison Between Epoxy Matrix Composites Reinforced with Ramie Fabric under Pressure and Vacuum -- Charpy Impact Test in Polyester Matrix Composites Reinforced With Hybrid Blanket of the Jute and Malva Fibers -- Part 7. …”
Full-text access

Characterization of Minerals, Metals, and Materials 2017

İçindekiler: “…Part 1: Soft Materials -- Charpy Toughness Behavior of Fique Fabric Reinforced Polyester Matrix Composites -- Comparative Analysis of Curaua Fiber Density Using the Geometric Characterization and Pycnometry Technique -- Izod impact tests in polyester matrix composites reinforced with blanket of the malva and jute fibers -- Tensile Behavior of Epoxy Matrix Composites Reinforced With Eucalyptus Fibers -- The dimensional characterization of jute fabric strips for reinforcement in composite polymeric -- Izod Toughness Behavior of Continuous PALF Fibers Reinforced Polyester Matrix Composites -- Mechanical, thermal, morphology and barrier properties of flexible film based on polyethylene-ethylene vinyl alcohol blend reinforced with graphene oxide -- Radiation Effects on Crosslinking of Butyl Rubber Compounds -- Part 2: Clays and Ceramics -- Effect of Skin-Core Hierarchical Structure on Dielectric Constant of Injection Molded and Cast Film Extruded Liquid Crystalline Polymer -- Aging behaviour in Ni0.5CoxMn2.5-xO4 (x=0.5, 0.8 and 1.1) thermistors -- Adsorption of lead from aqueous solutions to bentonite and composite -- Part 3: Electronic, Magnetic, Environmental, and Advanced Materials -- Characterization Of Low-Zinc Electric Arc Furnace Dust -- GAMMA-RADIATION EFFECT ON BIODEGRADABILITY OF SYNTHETIC PLA STRUCTURAL FOAMS PP/HMSPP BASED -- STUDY OF FLEXIBLE FILMS PREPARED FROM PLA/PBAT BLEND AND PLA e-BEAM IRRADIATED AS COMPATIBILIZING AGENT -- Synthesis of ZnO Micro Prisms on Glass Substrates by the Spray Pyrolysis Method -- Part 4: Nano Materials -- Electrical and microstructural investigation of Ni0.5Co0.5Cu0.3Zn0.3Mn1.4O4 temperature sensors -- Enhanced physical properties of thin film nanocomposites -- A study on the size and type of inclusions in Si-Mn combined deoxidated low carbon steel strip -- Effect of Argon Gas Purging of Spark Plasma Sintered ZrB2+SiC Nano-powder Composites -- Part 5: Alloys -- Investigating the Anisotropic Behaviour of Lean Duplex Stainless Steel 2101 -- MICROSTRUCTUAL INVESTIGATION AND IMPACT TESTING OF ADDITIVE MANUFACTURED TI-6AL-4V -- Part 6: Powders and Foams -- SYNTHESIS OF TiN NANO-COMPOSITE POWDER BY HIGH-ENERGY BALL MILLING OF TiH2 UNDER NITROGEN ATMOSPHERE -- Application of AFM in Morphology Determination of Powder Material -- Effects of Thermal Processing on Closed-Cell Aluminium Foams -- Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams under Drop Weight Impact -- Deformation Mechanisms of Closed Cell-Aluminium Foams during Drop Weight Impact -- Part 7: Minerals -- INDUSTRIAL USE OF BRAZILIAN BENTONITE MODIFIED BY MILD ACID ATTACK -- Mullitization Characteristics and Sinterability of Kyanite in Ceramic Preparation -- Ore Dressing and Technological characterization of Palygorskite from Piauí/Brazil for applications as adsorbent of heavy metals -- TECHNOLOGICAL CHARACTERIZATION OF WASTE FROM GOLD MINING DAM -- Synthesis and Characterization of Sodalite and Cancrinita from Kaolin -- Part 8: Ferrous Metals -- Effects of Alumina and Magnesia on Microstructure and Mineralogy of Iron Ore Sinter -- Isothermal Reduction Kinetics of CaO·2Fe2O3 by Thermogravimetric Analysis -- Phase Transformation of MnO2 and Fe2O3 Briquettes Roasted Under CO-CO2 Atmospheres -- Contact Angle of Iron Ore Particles with Water: Measurements and Influencing Factors -- Important Factors to Consider in FIB Milling of Crystalline Materials -- Part 9: Material Processing and Corrosion -- Corrosion Behavior of Super-Ferritic Stainless Steels in NaCl media -- Effect of bromide ions on the pitting corrosion of hafnium in anhydrous t-butanol and acetonitrile -- Compression Behavior of Semi-Closed Die Forged AZ80 Extrusion -- Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique -- Part 10: Method Development -- Development of A New Recycling Process of PGM from Metal-supported Catalyst Using Complex Oxide -- Part 11: Composites -- High thermal conducting composites using percolation theory -- SORPTION CHARACTERISTICS OF LOW DENSITY POLYETHYLENE/KOLA NUT COMPOSITE -- Residual Stress Analysis within Steel Encapsulated Metal Matrix Composites Via Neutron Diffraction -- Tensile Behavior of Epoxy Matrix Composites Reinforced With Pure Ramie Fabric -- Hemp Fiber Density Using the Pycnometer Technique -- Preparation and Characterization of Clay Exfoliation and Vegetal fibre on Properties of Recycled Low Density Polyethylene (rLDPE) -- Part 12: Ferrous Metals -- Estimation of Dislocation Density in Metals from Microhardness Test -- Part 13: Welding and Solidification -- Interfacial strength characterization in a high-modulus low-density steel-based Fe-TiB2 composite -- Part 14: Materials Extractions -- Leaching of Copper-Cobalt Tailings from the Democratic Republic of Congo -- OPTIMUM OPERATING CONDITIONS FOR EXTRACTION OF LIGNIN PRECURSORS FROM PALM FRUIT BUNCH -- SELECTION ON THE PROCESS FOR ENRICHING GOLD FROM REFRACTORY GOLD ORES BY SMELTING -- SELECTION ON THE PROCESS FOR REMOVING AND RECOVERING ANTIMONY FROM ANTIMONIAL REFRACTORY GOLD ORES -- Upgrading of Copper and Cobalt from the Democratic Republic of Congo Tailings -- CHARACTERIZATION OF SPENT PRINTED CIRCUIT BOARDS FROM COMPUTERS -- Study of the Effect of the Initial Nucleation Mechanism of Lead Anode Oxidation Film on Internal Stress in Chromic Acid Electrolyte -- Part 15: Poster Session -- Addition of Cellulose Nanofibers in Reactive Powder Concrete -- ADVANCED ION COLUMN SOLUTION FOR LOW ION DAMAGE CHARACTERIZATION AND ULTRA-FINE PROCESS -- Application of Membrane Separation Technology in Wastewater Treatment of Iron and Steel Enterprise -- Brillouin Scattering Study on Elastic Properties of Bulk hcp ZnO Single Crystal -- Characteristics of stamp charging coke and top charging coke -- Characterization and leaching proposal of Ag ( I) from a Zn concentrate -- Characterization and Mechanical Properties of Additively Manufactured Stainless Steel 316L -- CHARACTERIZATION OF MERCURY JAROSITE -- Characterization of steel production dust and their use in structural ceramics -- CHARPY TOUGHNESS BEHAVIOR OF JUTE FABRIC REINFORCED POLYESTER MATRIX COMPOSITES -- Chemical and Mineralogical Characterization of a Mixed Sulphide Ore at Zimapan, Hidalgo -- Contribution to the ß relaxation study of the HDPE, LDPE and LLDPE -- Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES -- Effects of wet grinding on the structure and granularity of biological origin aragonite and its polymorphic transformation into calcite -- EVALUATION OF BALLISTIC ARMOR BEHAVIOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS -- EVALUATION OF THE POZZOLANIC ACTIVITY OF RESIDUE FROM THE PAPER INDUSTRY -- EVALUATION OF THE PROPERTIES OF THE ADHESIVE MORTAR IN THE FRESH STATE WITH ADDITION OF GLASS WASTE -- Experimental Evaluation of the Influence of Mortar's Mechanical Properties on The Behavior of Clay Masonry -- Influence of Operation Conditions on Normal Stress and Flow Pattern of Burden Materials in Blast Furnace Based on Discrete Element Method -- Polymer Blend based on recycled polyethylene and ethylene vinyl acetate copolymers reinforced with natural fibers from agricultural wastes -- Preliminary study of the effect of stirring rate, temperature and oxygen pressure on the leach rate of copper powder, generated by grinding of printed circuit boards of computer -- Preparation and Characterization of Polyethylene Nanocomposites with Clay and Silver Nanoparticles -- Production of concrete interlocking blocks with partial replacement of sand in bulk by waste glass machined -- Reactive Powder Concrete Production with the Addition of Granite Processing Waste -- Research on the reason of the different type of chloride forming in the process of blast furnace ironmaking -- Stress and Deformation Analysis of Hot Blast Stove Piping System -- Stress and Deformation Analysis of Top Combustion Hot Blast Stove Shell -- STUDY OF CALCINED MIXTURES FROM INDUSTRIAL RESIDUES FOR PRODUCTION OF AGGLOMERATES.…”
Full-text access

Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018) Volume 2 /

İçindekiler: “…Modeling and Optimization of SIS Process Using Evolutionary Computational Approach -- Computational Characterization of a C-D Nozzle with Variable Geometry Translating Throat -- Synthesis and Characterization of Al2O3-Cr2O3 Based Ceramic Composites for Artificial Hip Joint -- Experimental Investigation On Tensile and Fracture Behaviour of Glass Fibre Reinforced Nanoclay/Mg-Al LDH Based Fiber Metal Laminates -- Experimental Study on Micro-Deburring Of Microgrooves by Micro-EDM -- Influences of Tool Pin Profiles on Mechanical Properties of Friction Stir Welding Process of Aa8011 Aluminium Alloy -- Numerical Investigation of the Behavior of Thin Walled Metal Tubes Under Axial Impact -- Improving Process Performance with World Class Manufacturing Technique: A Case in Tea Packaging Industry -- Tensile Testing and Evaluation of 3D Printed PLA Specimens as Per ASTM D638 Type-IV Standard -- Design Optimization and Testing Of Structure of a Single Door Refrigerator -- Use of Low Fidelity Codes for Teaching Aircraft Design -- Drag Reduction for Flow Past A Square Cylinder Using Rotating Control Cylinders - A Numerical Simulation -- Study the Effect of Mill Scale Filler on Mechanical Properties of Bidirectional Carbon Fibre Reinforced Polymer Composite -- Study On Carbon, Glass and Flax Hybrid Composites Using Experimental and Computational Techniques -- Design Evaluation of A Mono-Tube Magnetorheological (MR) Damper Valve -- Characterization of Soot Microstructure for Diesel and Biodiesel Using Diesel Particulate Filter -- Performance of Diesel Particulate Filter Using Metal Foam Combined With Ceramic Honeycomb Substrate -- Dry Machining of Nimonic 263 Alloy Using PVD and CVD Inserts -- Investigation of Parameters for Machining a Dif-Ficult-To-Machine Superalloy: Inconel X-750 and Waspaloy -- Aerodynamic Characteristics of Semi-Spiroid Winglets at Subsonic Speed -- Vibrational Analysis of Self-Aligning Rolling Contact Bearing Defects -- Fabrication and Characterization of Cu2-Xzn1.3sns4 Kesterite Thin Films Synthesized By Solvent Based Process Method for Photovoltaic Solar Energy Applications -- Formula SAE Power Increment -- Temperature Behavior-Based Monitoring Of Worm Gears Under Different Working Conditions -- Production and Comparison of Fuel Properties for Various Bio-Diesels -- Experimental Determination of Fluid Flow Parameters to Study Permeation Process Inside A Porous Channel -- Diesel Engine Cylinder Head Port Design for Armoured Fighting Vehicles: Compromise and Design Features -- Design Optimization of Advanced Multi-Rotor Unmanned Aircraft System Using FSI -- Studies on Carbon Materials Based Antenna for Space Applications -- Progress and Issues Related To Designing and 3D Printing Of Endodontic Guide -- Physical and Tribological Behaviour of Dual Particles Reinforced Metal Matrix Composites -- Parametric Optimization of Friction Welding Parameter of Ferritic Stainless Steel and Copper Material Using Taguchi Approach -- Experimental Investigation onthe Thermal Performance of the Light Emitting Diode (LED) Heat Sinks -- Numerical Modeling of Spiral Cyclone Flow Field and the Impact Analysis of a Vortex Finder -- Lattice Boltzmann Simulation of Double-Sided Deep Cavities at Low Reynolds Number -- A Study of Thermo-Structural Behavior of Annular Fin -- A New Design to Achieve Variable Compression Ratio in a Spark Ignition Engine -- Experimental Investigation on Energy Saving Due To Bubble Disturbance in Boiling Process -- Highway Traffic Scenario Based Lane Change Strategy for Autonomous Vehicle -- Friction and Wear Analysis of PTFE Composite Materials -- Flow Analysis of Catalytic Converter - LCV BS III Applications for Optimising Pressure Drop -- Step Towards Computer Aided Integration Of Sheet Metal Applications -- Thermodynamic Analysis of Diesel Engine Fueled With Aqueous Nanofluid Blends -- Investigation of Twin Cylinder Direct Injection CI Engine Characteristics Using Calophyllum Inophyllum Biodiesel Blends -- A Novel Beetle Inspired Fuel Injection System for Improved Combustion Efficiency -- Effect of Friction Stir Processing On the Dry Sliding Wear Behaviour of AA6082-5tib2 Composite -- Optimization of Sliding Wear Performance of Ti Metal Powder Reinforced Al 7075 Alloy Composite Using Taguchi Method -- A Comparative Study on Mechanical and Dry Sliding Wear Behaviour of Al 7075-T6 Welded Joints Fabricated By FSW, TIG and MIG -- Overview of Cryogens Production and Automation in Cryo-Distribution at TIFR, Mumbai -- Analysis of Recast Layer, Wear Rate and Taper Angle in Micro-Electrical Discharge Machining Over Ti-6Al-4V -- Evaluation of Critical Speed for Aluminum - Boron Carbide Metal Matrix Composite Shaft -- Smart System for Feature Recognition of Sheet Metal Parts: A Review. .…”
Full-text access

Ground Improvement Techniques and Geosynthetics IGC 2016 Volume 2 /

İçindekiler: “…THEME 3 : GROUND IMPROVEMENT AND GEOSYNTHETICS -- Behaviourial Study on Geopolymer Column in Soil -- A Study of Parameters Influencing Efficiency of Micropile Groups -- Alteration of CBR Values in Soft Soils using Enzymatic Lime -- Factors which Influence PVD Performance in Soft Clay Consolidation -- Experimental Study of Heave Control Technique for Expansive Soil using Micropiles and Geotextile Layers -- Effect of Underground Void on the Internal Stress Distribution in Soil -- Influence of Properties of Infill Material on the Behaviour of Geocells -- Investigation of Glass Fiber Reinforcement Effect on the CBR Strength of Cohesive Soil -- Bearing Capacity of Strip Footing on Clay Soil Reinforced with Metal Strips and with Anchors -- Application of Microbial Induced Carbonate Precipitation for Soil Improvement Via Ureolysis -- Influence of Organic Content on Fly Ash Stabilisation of Clay -- Strength Behaviours of the Clayey-Silt Soil Mixed with Fly Ashand Sand -- Strength Behaviour Of Expansive Soil Treated With Quarry Dust And Ferric Chloride -- Lime Stabilization of Subgrade with Waste Sand as Partial Soil Replacement -- Assessment Of Vetiver Grass Root-Reinforcement In Strengthening The Soil -- Geotechnical Aspects of Constructions Along the Canal Embankment using Rice Husk Ash as Stabilizer -- Use of Jhama Columns as Replacement of Stone Columns -- Laboratory Study on the Performance of Geo-Synthetic Reinforced Sand Bed -- Repeated Load Response of Encapsulated Granular Trench Supported Footings on Embankments -- Re-Appraisal of Physico-Mechanical Stability of Lime Treated Soils -- Back analysis of PVD performance in Mumbai Port -- Discharge and Absorption Capacity Tests on Composite Prefabricated Vertical Drains -- Stabilization of Clay at Sunnam Cheruvu Area in Nadergul, Hyderabad using Organic Waste -- The Tensile Strength Behavior of Lime Stabilized Soft Soil with Inclusion of Plastic Fiber -- Pullout Behaviour of Geosynthetics - a Review of Laboratory Testing Techniques -- Model Study on Cyclic Loading Responses of Flexible Pavement System Laid on Expansive Subgrade -- Evaluating the Strength Characteristics of Lime and Metakaolin Stabilized Expansive Soil -- Ground Improvement using Sand Columns to Mitigate Liquefaction - a Case Study -- Stabilization of Expansive Soil with Red Mud and Lime -- California Bearing Ratio and Permeability Behaviour of Fly Ash Reinforced with Geotextiles -- Influence of Granulated Blast Furnace Slag Contents on California Bearing Ratio Value of Clay Gbfs Mixture -- Geocell Reinforced Dense Sand Bases Overlying Weak Sand Subgrades Under Repeated Loading -- Load-Settlement Behaviour of Granular Pile on Cochin Marine Clay using Recycled Aggregate -- Transmissivity of Coir Latex Composite -- Influence of Combined Vertical and Horizontal Reinforcement on Granular Piles in Soft Clays -- Effect of Ggbs and Lime on the Strength Characteristics ofBlack Cotton Soil -- Soil Improvement using Microbial: a Review -- Long Term Strength Studies on Natural Fibre Composite (N-F-C) Sheets for Use as Separator in Flexible Pavements in Terms of CBR Values -- Coefficient of Consolidation for Vertical and Radial Drainage -- Comparative Analysis of Strength Characteristics of Soil Reinforced with Coir and Polypropylene Fibers -- Geo-Engineering Properties of Sedimented Flyash Bed Stabilized by Chemical Columns -- A Short Review of Geosynthetic Granular Column Treatment of Soft Clay Soils -- Engineered Anti Erosion Works Along the Right Bank of Jiabharali River in Assam -- Static and Cyclic Properties of Eps Geofoam -- Swell Behavior of Expansive Soils with Stabilized Fly Ash Columns.…”
Full-text access

Emerging Challenges for Experimental Mechanics in Energy and Environmental Applications, Proceedings of the 5th International Symposium on Experimental Mechanics and 9th Symposium...

İçindekiler: “…TOC Martinez-Garcia Optical Imaging through Horizontal-Path Turbulence: A New Solution to a Difficult Problem -- Aluminum Strain Measurement by Beam Propagation -- The Technique of Laser-Induced Breakdown Spectroscopy for Determination of Heavy Metals in the Receiving Body of Water -- Applications of Laser Induced Breakdown Spectroscopy in the Identification of Bacteria -- Residual Stresses Measurement by the Hole-Drilling Technique and DSPI using the Integral Method with Displacement Coefficients -- On the separation of complete triaxial strain/stress profiles from diffraction experiments -- Quantification of slow mechanical displacements in metal samples by optical polarization phase shift DSPI -- Comparative analysis of optoelectronic properties of glucose for non-invasive monitoring -- Phase Shifting Interferometry using a coupled cyclic path interferometers -- Identification of microorganisms using digital holographic microscopy -- Noise reduction in off-axis digital holography reconstruction from two reconstruction distances based on Talbot effect -- Study of temperature distribution over a Stirling engine by using the Schlieren technique -- On Axis Fringe Projection -- Instrument for recording Purkinje images -- Ultrasonic Arc Maps and its potential application in non-destructive testing -- Phase-shifting generated by wavelength modulation by means of switching on-off a laser diode -- Index refraction measurements in liquid substances of full field using holographic interferometry -- Geometrical thickness measurement of thin films by a transmitted Gaussian beam -- Topography and color study of an object using fringe projection and colorimetry techniques -- Temperature measurement of a synthetic jet produced by a Helmholtz cavity -- Gates' interferometer as fringe projection system for recovering 3D shapes -- Development of an automated Laser Induced Breakdown Spectroscopy system for compositional mapping of surfaces -- Artificial visual system used for dental fluorosis discrimination -- Inspection of Laser Ablated Transparent Conductive Oxide Thin Films by a Multifunction Optical Measurement System -- LIBS technique for identification of crude oils -- 3D Displacement Distribution Measurement Using Sampling Moire Method with Multiple Cameras -- Automatic Generation of Codes for Routine of CNC Machining Based on Three-Dimensional Information Obtained by Fringe Projection -- Automatic Generation of Movement Sequences to Robotic Arm Based on Three-Dimensional Data Obtained through Fringe Projection Technique -- Application of optomecatronic load cell for measuring work force and efforts in industrial machinery -- ASE Noise Attenuation for Signal at 1548.4 nm throught a Sagnac Interferometer using High-Birefingence Fiber which is Subjected to Temperature Changes -- Single-shot Phase shifting interferometry for microscopic measurements of non-birefringent transmissive phase samples -- Design of a customized myoelectric hand prosthesis -- Finite element static analysis simulation for a grain dispenser mechanism -- Controlling Bounce of Vacuum Circuit Breakers' Contacts -- Experimental and Numerical Investigation of Effects of Fiber Orientation of Wood Stiffness -- Auto-calibration and micro-flow injection procedure based on automated hydrodynamic system for spectrophotometric determination of cobalt -- Mathematical Model to Predict the Stress Concentration Factor on a Notched Flat Bar in Axial Tension -- Mechanical implementation of Kinematic Synergy for multi-point grasping -- Cascaded ultra-low reflective fiber points for distributed sensing -- Object surface representation via NURBS and genetic algorithms with SBX -- Photo-Oxidation of Polystyrene Film Irradiated With UV-B -- Dynamic analysis of trawl doors applied in bottom trawls to catch shrimp -- Simulator of an Adaptive Optics System Using Matlab -- Design, development and validation of an Artificial Muscle Biomechanical Rig (AMBR) for Finite Element model validation -- Application of laser light on the development of equipment for the study of proteins -- Organic Solar Photovoltaic cells -- Fiber Bragg Gires-Tournois interferometer etalons as fiber sensor -- Cleaning of Tantalum capacitor electrode surface by laser in multipulse regime -- High quality polishing procedure of glass substrates: application in integrated optics.…”
Full-text access

Dynamic Behavior of Materials, Volume 1 Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /

İçindekiler: “…Dynamic Reponse of Alumina Ceramics under Brazilian Disc Test Conditions -- Chap7. Digital Gradient Sensing Method to Visualize and Quantify Crack-tip Deformations in Soda-lime Glass under Static and Dynamic Loading -- Chap8. …”
Full-text access

3D industrial printing with polymers / Yazar: Fink, Johannes Karl

İçindekiler: “…Methods of 3D Printing -- History -- Recently Developed Materials for 3D Printing -- Shrinkage Compensation -- Basic Principles -- 3D Printing -- Uses and Applications -- Heat Exchangers -- 3D Plastic Model -- Gradient Refractive Index Lenses -- Photoformable Composition -- Comb Polymers -- Post-Processing Infiltration -- Sensors and Biosensors -- Magnetic Separation -- Rapid Prototyping -- Variants of Rapid Prototyping -- 3D Microfluidic Channel Systems -- Aluminum and Magnesium Cores -- Cellular Composites -- Powder Compositions -- Organopolysiloxane Compositions -- Thermoplastic Powder Material -- Plasticizer-Assisted Sintering -- Radiation-Curable Resin Composition -- Solution Mask Liquid Lithography -- Vat Polymerization -- Poly(dimethyl siloxane)-Based Photopolymer -- Hot Lithography -- Ambient Reactive Extrusion -- Micromanufacturing Engineering -- Analytical Uses -- Gas Sensors -- Chemical Engineering -- Gas Separation -- Hierarchical Monoliths for Carbon Monoxide Methanation -- Rotating Spinnerets -- Objects with Surface Microstructures -- Lightweight Cellular Composites -- Textiles -- 3D Printed Polymers Combined with Textiles -- Mechanical and Electrical Contacting -- Soft Electronic Textiles -- 3D Textiles Polymers -- Polymer Matrix Composites -- Biocomposite Filaments -- Nanocomposites -- Nanowires -- Fiber Reinforced Polymers -- Carbon Fiber Polymer Composites -- FDM Printing -- Powder Bed and Inkjet Head 3D Printing -- Stereolithography -- Selective Laser Sintering -- Sequential Interpenetrating Polymer Network -- 3D Printable Diamond Polymer Composite -- Adhesives for 3D Printing -- Voronoi-Based Composite Structures -- Graphene Oxide Reinforced Complex Architectures -- Multiwalled Carbon Nanotube Composites -- Multifunctional Polymer Nanocomposites -- Additive Manufacturing -- Thermosetting Polymers -- UV Curable Materials -- (Meth)acrylate Monomers -- Thiol-ene and Thiol-yne Systems -- Epoxides -- Visible Light-Curable and Visible Wavelength-Transparent Resin -- Poly(ether ether ketone) -- Lasers -- Ultra-High MolecularWeight PE -- Production of PP Polymer Powders -- Acrylate-Based Compositions -- Dimensionally Stable Acrylic Alloys -- Oligoester Acrylates -- Standards -- Biomedical Applications -- Color -- Particle-Free Emulsions -- Shape Memory Polymers -- Synthesis with Stereolithography -- Flexible Electronics -- Magnetically Responsive Shape Memory Polymer -- Sequential Self-Folding Structures -- Multi-shape Active Composites -- Radiation Sensitizers -- Shape Memory Alloy Actuating Wire -- Metal Electrode Fabrication -- 3D Printing -- Water-Soluble Polymer -- Water-Washable Resin Formulations -- Extremely Viscous Materials -- Tunable Ionic Control of Polymeric Films -- Photopolymer Compositions -- Mechanical Properties of UV Curable Materials -- High-Performance Photopolymer with Low-Volume Shrinkage -- Dual Initiation Wavelengths for 3D Printing -- Crosslinked Polymers -- Recycled Plastics -- 3D Printed Fiber Reinforced Portland Cement Paste -- Polymer-Derived Ceramics -- Photocurable Ceramic/Polymer Composites -- Ceramic Matrix Composite Structures -- Selective Laser Melting -- Stereolithography Resin for Rapid Prototyping of Ceramics and Metals Airplanes and Cars -- Airplanes -- Material Testing Standards -- Lightweight Aircraft Components -- Aircraft Spare Parts -- Polymer Laser Sintering -- Composites Part Production -- DeployableWing Designs -- Additive Manufacturing for Aerospace -- Fiber Reinforced Polymeric Components -- Manufacturing of Aircraft Parts -- Multirotor Vehicles -- Flame Retardant Aircraft Carpet -- Aircraft Cabins -- Additive Manufacturing of Solid Rocket Propellant Grains -- High Temperature Heating System -- Aerospace Propulsion Components -- Antenna RF Boxes -- Cyanate Ester Clay Nanocomposites -- Bionic Lightweight Design -- Cars -- Laser Sintering -- Automotive Repair Systems -- Improving Aerodynamic Shapes -- Common Automotive Applications -- Thermomechanical Pulp Fibers -- Polyamic Acid Salts -- Recycled Tempered Glass from the Automotive Industry Electric and Magnetic Uses -- Electric Uses -- Conductive Microstructures -- Modular Supercapacitors -- Active Electronic Materials -- Piezoelectric Materials -- Holographic Metasurface Antenna -- Waveguide -- Fuel Cell -- Batteries -- Magnetic Uses -- Polymer-Based Permanent Magnets -- Bonded Magnets -- Strontium Ferrite -- Soft-Magnetic Composite -- Discontinuous Fiber Composites by 3D Magnetic Printing Medical Applications -- Basic Procedures -- Image Acquisition -- 3D Printing -- Microvalve-Based Bioprinting -- 3D Printed Organ Models for Surgical Applications -- Organ Bioprinting -- Materials -- Liver -- Heart -- Cartilage -- Bionic Ears -- Skin -- Scaffolds -- Personalized Implants -- Neural Tissue Models -- Bioinks -- Cytocompatible Bioink -- Hydrogel Bioinks -- Dentin-Derived Hydrogel Bioink -- Decellularized Extracellular Matrix Materials -- Silk-Based Bioink -- Nanoengineered Ionic-Covalent Entanglement Bioinks -- Living Skin Constructs -- Cell-Laden Scaffolds -- Patient-Specific Bioinks -- Presurgical Simulation -- Models with Integrated Soft Tactile Sensors -- Dental Applications -- Prosthetics -- Fluidic Devices -- 3D Bioprinting of Tissues and Organs -- 3D Bioprinting Techniques -- Pigmented Human Skin Constructs -- Strategies for Tissue Engineering -- Bone Tissue -- Neuroregenerative Treatment -- 3D Tissues/Organs Combined with Microfl uidics -- 3D Microfi brous Constructs -- Biosynthetic Cellulose Implants -- Polysaccharides -- Corneal Transplants -- Hydrogels from Collagen -- Dissolved Cellulose -- Hydrogels from Hyaluronic Acid and Methylcellulose -- Stem Cells -- Autografts -- Drug-Eluting Coronary Stents -- Biomedical Devices -- Soft Somatosensitive Actuators Pharmaceutical Uses -- Drug Release -- Pharmaceutical 3D Printing -- Pharmaceutically Acceptable Amorphous Polymers -- Paracetamol Oral Tablets -- Patient-Specific Liquid Capsules -- Thermolabile Drugs -- Composite Tablets -- Transdermal Drug Delivery -- Chip Platforms for Microarray -- 3D Bioprinting -- Index --Acronyms --Chemicals --General Index.…”
Full-text access

Advances in Manufacturing Technology Select Proceedings of ICAMT 2018 /

İçindekiler: “…Evaluation of Tensile Properties of Nano Clay Filled Madar Fiber Reinforced Polyester Hybrid Composites -- Characterization of Economical Aluminium Mmc Reinforced With Weld Slag Particles -- Optimization of Weld-Bead Parameters Of Plasma Arc Welding Using Ga and Iwo -- Experimental Studies on the Effect of Basalt Powder Inclusion On Mechanical Properties of Hybrid Epoxy And Polyester Composites Reinforced With Glass Fiber -- An Experimental Investigation on Tensile Properties of Hybrid Bio Polyurethane Composite: Modelling and Optimization -- Improvement of Machining Characteristics by Edm with Graphite Powder Mixed Dielectric Medium -- Measuring Industrial Symbiosis Index Using Multi Grade Fuzzy Approach -- Fabrication and Machining Characteristics of Al7075-Red Mud and Al7075-Tic Metal Matrix Composites -- Multi Criteria Optimization of Machining Parameters in Wedm of Titanium Alloy 6242 -- Water Absorption & Density Tests on the Water Hyacinth Based Partial Green Composite -- ExperimentalAnalysis on the Mechanical Properties of Dissimilar Material Joint During Pctig Welding -- Influence of Flux Coating During Dissimilar Welding of Copper With Brass Using Atig Welding Process -- Innovative Nitride Film Deposition on Copper Interconnects of Mems Devices Using Plasma Enhanced Chemical Vapour Deposition Techniques.…”
Full-text access

GFRP donatılı betonarme kirişlerin eğilme, kesme ve aderans davranışı/ Yazar: Sakcalı, Gökhan Barış

Proceedings of the 3rd Pan American Materials Congress

İçindekiler: “…Part 1: Pan American Materials Congress: Advanced Biomaterials -- Analysis of Biomimetic Surgical Clip Using Finite Element Modeling for Geometry Improvement and Biomaterials Selection -- Chemical composition effect of sol-gel derived bioactive glass over bioactivity behavior -- Effects of Dialium guineense based zinc nanoparticle material on the inhibition of microbes inducing microbiologically influenced corrosion -- Injectability evaluation of bone-graft substitutes based on carrageenan and hydroxyapatite nanorods -- Synthesis and characterization of Ni0.5Zn0.5Fe2O4@mSiO2 core shell nanocarrier for drug delivery applications -- Part 2: Pan American Materials Congress: Advanced Manufacturing -- Carbon Based Coatings Deposited On Nitrided Stainless Steel: Study Of Thermal Degradation -- Comparative Mechanical Analysis Between Epoxy Composite Reinforced With Random Short Cuarua Fibers And Aligned Long Curaua Fibers -- Effect of Tool Rotation on Tool Wear Phenomenon in Rotary Tool micro-USM -- Numerical Modeling of High-Velocity Impact Welding -- Selective Laser Sintering of Polyamide/Hydroxyapatite Scaffolds -- Part 3: Pan American Materials Congress: Materials for Green Energy -- A comparison between recycled spent zeolite and calcite limestone for manganese removal -- Effect of Mo6+ Substitution on Microstructure and Lithium Ionic Conductivity of Garnet-Type Li7La3Zr2O12 Solid Electrolytes by Field Assisted Sintering Technology -- Electromagnetic Levitation Refining Of Silicon-iron Alloys for Generation of Solar Grade Silicon -- Green Extract of Mate Tea as Corrosion Inhibitor of Copper and Aluminum -- Platinum Salts Synthesis as Precursors to Get Heterogeneous Catalysts for Biofuels Production -- Technical and Environmental Assessment of an Alternative Binder for Low Traffic Roads with LCA Methodology -- Part 4: Pan American Materials Congress: Materials for Infrastructure -- Anticorrosion and Adsorption Mechanism of Rhizophora mangle L Leaf-extract on Steel-reinforcement in 3.5% NaCl-immersed Concrete -- Cassia fistula leaf-extract Effect on Corrosion-inhibition of Stainless-steel in 0.5 M HCl -- Effect of C5H11NO2S on Reinforcing-steel Corrosion in Concrete Immersed in Industrial/Microbial Simulating-environment -- FIBER REINFORCED CONCRETE MANUFACTURED WITH ELECTRIC ARC FURNACE SLAG -- Jigs, hydro-cyclones and sensor-based sorting to value recycled aggregates -- Performance of hydraulic mixes manufactured with electric arc furnace slag aggregates -- POROUS ASPHALT MIXTURES WITH 100% SIDERURGIC AGGREGATES -- Part 5: Pan American Materials Congress: Materials for Oil and Gas Industry -- Blends of PVDF with its processing waste: Study of the mechanical properties of the blends thermally aged -- DYNAMIC TRANSFORMATION AND RETRANSFORMATION DURING THE SIMULATED PLATE ROLLING OF AN X70 PIPELINE STEEL -- Effect of Heat Input on the microstructure and toughness of welded API pipelines -- EVALUATION OF NON-DESTRUCTIVE TECHNIQUES (THERMOGRAPHY, ULTRASOUND AND EDDY CURRENT) FOR DETECTION OF FAILURES IN METALLIC SUBSTRATES WITH COMPOSITE ANTICORROSIVE COATINGS -- Structural Integrity of Pipelines -- Part 6: Pan American Materials Congress: Materials for Transportation and Lightweighting -- ADVANTAGES OF HOT COMPRESSION IN THE MANUFACTURE OF AlB4C COMPOSITES -- An Improved Silicon Carbide Monofilament for the Reinforcement of Metal Matrix Composites -- Analysis of coir fiber porosity -- BALLISTIC PERFORMANCE IN MULTILAYER ARMOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS -- Curaua non-woven fabric composite for ceramic multilayered armors: A lightweight, natural, and low cost alternative for KevlarTM -- Effect of Forging on Microstructure, Texture and Compression Behaviour of Extruded AZ31B -- EFFECTS OF HYPOEUTECTIC Sc ADDITIONS TO Al-4.5 wt% Cu UNDER DIFFERENT COOLING RATES -- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH FIQUE FABRIC -- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH JUTE FABRIC -- Microstructure and Hardness of Subzero Quenched and Heat Treated Ti-6Al-4V Alloy -- Nano-Additive Reinforcement of Thermoplastic Microballoon Epoxy Syntactic Foams -- Nanocomposites Mechanical and Tribological Properties using Graphene Coated Ceramic Nanoparticles for Light Weight Applications -- Synthesis of Energetic Composites in Ti-Al-B-C System by Adiabatic Explosive Compaction -- Tensile and impact properties of two fiber configurations for curaua reinforced composites -- Thermo\\8722;Mechanical behavior of nanostructure polyacrylic polymer based on Al2 O3 and bentonite nanoparticles -- Thermo\\8722;mechanical properties of waterborne acrylate hybrid nanocomposites -- Thermo-mechanical properties of copolymer/clay nanocomposites: A comparative study of production method by in-situ and solution mixture -- Part 7: Pan American Materials Congress: Minerals Extraction and Processing -- Biotechnological recycling of precious metals sourced from post-consumer products -- Biotechnologies for water recycling in the mineral industry -- Dissolution thermodynamics of smithsonite in alkaline iminodiacetate aqueous solution -- Effect of ethylenediamine on smithsonite flotation -- Extraction of Gold from sands and Slimes Tailings Dump from Mazowe Mine, Zimbabwe -- Gold Recovery from Waste Solutions of PCB Gold Plating Process using Hydro Cyclone Reactor for Demonstration Study -- Improving Quality of Coke Made from Chinese Xinjiang Gas Coal with High Strength Modifier -- INVESTIGATING THE DISSOLUTION CHARACTERISTICS OF STRONTIUM SULFIDE -- Kinetic study on the leaching of vanadium-bearing converter slag with dilute sulfuric acid -- Leaching of Spent Ni-Mo Hydrodesulphurization (HDS) Catalyst in Oxalic Acid Solutions -- Novel Adsorbent from Iron Ore Concentration Tailings for Toxic Cationic Dye Removal from Water -- Preliminary analysis of the application of sensor based sorting on a limestone mine in the region Caçapava do Sul, Brazil -- Preparation of high grade Industrial Copper Compound from a Nigerian Malachite mineral by Hydrometallurgical process -- PROCESS OF IMPROVING THE FLOTATION USING ULTRASONIC BOMBARDMENT -- Production of strontianite from celestite ore in carbonate media -- Reduction Kinetics and Characterization Study of Synthetic Magnetite Micro Fines -- Study on Leaching Valuable Elements from Bayan Obo Tailings -- Study on thermal decomposition and oxidation characteristics of iron ores -- The direct leaching of micro-disseminated gold concentrate by bromide process and the characterization of leaching products -- Working Experience with the new WOX Plant to treat zinc waelzoxide at ZGH Boleslaw SA, Poland -- Part 8: Pan American Materials Congress: Nanocrystalline and Ultra-fine Grain Materials and Bulk Metallic Glasses -- Continuous dynamic recovery in pure aluminum deformed to high strain by accumulative press bonding -- Effects of Natural Aging and Post-processed Heat Treatment on the Microstructure and Mechanical Properties of Friction Stir Processed Al-7B04 -- Evaluation of the hardening and softening effects in Zn-21Al-2Cu with as cast and homogenized microstructure processed by equal channel angular pressing -- Part 9: Pan American Materials Congress: Steels -- Effect of titanium sulfide precipitates on grain size in low carbon steel -- Evolution of Austenite Dislocation Density during Hot Deformation using a Physical Dynamic Recrystallization Model -- Influence of a Rapid Heating on the Microstructure and Properties of Press-Hardening Steel Sheets -- Jansto:New Generation Niobium Bearing Structural Steels for Future Infrastructure Demands -- Kinetic study of the austenite decomposition during continuous cooling in a welding steel -- Microstructural Evolution in Microalloyed Steels during Thermomechanical Rod Rolling -- MODELING OF METAL-SLAG MASS AND MOMENTUM EXCHANGES IN GAS-STIRRED LADLES -- Study on adjustment and optimization of LF refining slag of spring steel 55SiCrA -- Tempering Response of Bainitic and Martensitic Microstructures -- The research on the relationship between gas movement behaviors and circulating flow of the molten steel in RH.…”
Full-text access

Proceedings of the International Conference on Microelectronics, Computing & Communication Systems MCCS 2015 /

İçindekiler: “…A Secure Three-Factor Remote User Authentication Scheme Using Elliptic Curve Cryptosystem -- Implementation of Fingerprint-Based Biometric System and Its Integration With Hrms Application At Rdcis, Sail -- Fabrication and Investigation of Low Voltage Programmable Flash Memory Gate Stac -- An Effective Method For Maintenance Scheduling of Vehicles Using Neural Network -- Universally Verifiable Certificateless Signcryption Scheme For Manet -- Impact of Sidewall Spacer Layers On The Analog/Rf Performance of Nanoscale Double-Gate Junctionless Transistors -- A Novel Data Encryption Approach In The Grid Structured Binary Image -- Analysis of Electromagnetic Wave Using Explicit FDTD in TM Mode with Extrapolation -- A Dea Based Evolutionary Computation Model For Stock Market Forecasting -- Electrical Equivalent Model For Gene Regulatory System -- Colour Image Segmentation Techniques: A Survey -- Wireless Image Sensor Networks: A Review -- Design of A Low Cost Heart Rate Monitoring System -- Design of Da Based Fir Filter Architectures Using Lut Reduction Techniques -- Fractional Delay Fir Filter Architecture Using Numeric Strength Reduction Techniques -- Lifetime Enhancement of Wsn Based On Modified Heterogeneous Leach Protocol -- Modeling and Investigation of Electrothermally Actuated Micro-Gripper -- An Ultra Low Power Internet Controlled Home Automation System -- Depth Averaged Velocity Distribution For Symmetrical and Asymmetrical Compound Channels -- A 0.533 Db Noise Figure, 7 Mw Narrowband  Low Noise Amplifier For Global Position System Application -- Design of Ultra Low Power Cmos Class E Power Amplifier -- Cryptic Mining For Automatic Variable Key Based Cryptosystem -- Single Mode Negative Dispersion Hexagonal Photonic Crystal Fiber -- Improved Clustering For Categorical Data With Genetic Algorithm -- Balanced Wrapper Design To Test The Embedded Core Partitioned Into Multiple Layer For 3d Soc Targeting Power and Number of TSVS -- Investigations On The Logic Performance of Hybrid Cmosfets Comprising P-Ge/ N-Ingaas Mosfets With  Barrier Layers -- Antenna Path Loss Propagation Model In The Dehradun Valley At 1800 Mhz In L- Band -- Reduction of Dark Current In Qwip -- Design of Circular Disc Monopole Antenna For Uwb Application.…”
Full-text access

Fatigue of Materials at Very High Numbers of Loading Cycles Experimental Techniques, Mechanisms, Modeling and Fatigue Life Assessment /

Full-text access