Arama Sonuçları - (sols OR sole) (pollution. OR solution. )

Soil pollution : from monitoring to remediation /

Konular: Full-text access
OPAC'ta görüntüle

Extractive metallurgy of copper /

Full-text access
OPAC'ta görüntüle

Sol-Gel Materials for Energy, Environment and Electronic Applications

Full-text access
OPAC'ta görüntüle

Sol-gel Based Nanoceramic Materials: Preparation, Properties and Applications

Full-text access
OPAC'ta görüntüle

Advances in functional and protective textiles /

İçindekiler: “…Front Cover -- Advances in Functional and Protective Textiles -- Copyright Page -- Contents -- List of contributors -- Preface -- 1 Sol-gel technique for protective textile and clothing -- 1.1 Introduction -- 1.2 Fundamentals of the sol-gel technique -- 1.3 Sol-gel treatments on fabrics: fully inorganic coatings -- 1.4 Sol-gel treatments on fabrics: phosphorus-doped sol-gel coatings -- 1.5 Sol-gel treatments on fabrics: smoke suppressant formulations -- 1.6 Sol-gel treatments on fabrics: hybrid organic-inorganic sol-gel coatings -- 1.7 Current limitations of the sol-gel technique…”
Full-text access
OPAC'ta görüntüle

Membranes Materials, Simulations, and Applications /

İçindekiler: “…1 Poly (Hexahydrotriazine) Membranes Prepared By Coupling Reaction between Diamines and Aldehydes -- 2 Preparation and Characterization of Hybrid Membranes Based on Poly(Ether-B-Amide) -- 3 Preparation of Membranes Based on PolySulfone (PSU) and Graphene Oxide (GrO) by Electrospinning -- 4 Ceramic Crossflow Filtration in Food and Dairy Applications -- 5 Sulfated TiO2-ZrO2 Membrane as-synthesized by Sol-Gel Method: Application in the Olefin Oligomerization -- 6 CO2/N2 Separation in Postcombustion Processes by Means of Alumina-Supported-Ionic-Liquid Membranes -- 7 Synthesis of Catalytic Membranes for the Oxidation of Organic Pollutants in Wastewater -- 8 Ion Transport through Biomimetic Nanochannel Membranes -- 9 Synergies between Pulsatile Flow and Spacer Filaments in Reverse Osmosis Modules -- 10 Obtaining the Tortuosity Factor as a Function of Crystallinity in Polyethylene Membranes -- 11 Three Dimensional Modelling, and Simulation of Multilayer Spacers for Spiral Wound Membrane Modules.-12 Biofouling Studies on Thin Film Composite Membranes in Reverse Osmosis Desalination Processes -- 13 Photo-Oxidation Treatment of the Reject Stream of a Nanofiltration Membrane System -- 14 Cleaning Strategies for a Membrane Bioreactor to Produce Permeate with a Quality Suitable for Indirect Reuse -- 15 Effect of the Transport Properties on the Design of a Plant and on the Economy of The Sweetening Process of Natural Gas Using Membranes -- 16 Fouling Modeling and Optimization of Membrane Module Design for Brackish and Sea Water Desalination in the Mexican Pacific Coast - Project Description and Progress -- 17 Research on Polymer Membranes and Teaching Performed in Unam Campus Morelia.…”
Full-text access
OPAC'ta görüntüle

Nanoscience and Cultural Heritage

Full-text access
OPAC'ta görüntüle

Characterization of Metals and Alloys

İçindekiler: “…Characterization of Steels Used in the Oil Industry -- Mechanical and Metallurgical Properties of Grade X70 Steel Linepipe Produced by Non-Conventional Heat Treatment -- Corrosion Inhibition of X52 Pipeline Steel in Chloride Solutions Using Non-ionic Surfactant -- Effect On The Microstructure And Mechanical Properties Of The Structural Steel Welded In Marine Environment -- Part 2. …”
Full-text access
OPAC'ta görüntüle

Self-healing polymers : from principles to applications /

İçindekiler: “…3.4 ConclusionsPart Two: Polymer Dynamics; 4: Structure and Dynamics of Polymer Chains; 4.1 Foreword; 4.2 Techniques; 4.3 Structure; 4.4 Dynamics; 4.5 Application to Self-Healing; 4.6 Conclusions and Outlook; 5: Physical Chemistry of Cross-Linking Processes in Self-Healing Materials; 5.1 Introduction; 5.2 Thermodynamics of Gelation; 5.3 Viscoelastic Properties of the Sol-Gel Transition; 5.4 Phase Separation and Gelation; 5.5 Conclusions; 6: Thermally Remendable Polymers; 6.1 Principles of Thermal Healing; 6.2 Inorganic-Organic Systems; 6.3 Efficiency, Assessment of Healing Performance.…”
Full-text access
OPAC'ta görüntüle

Surface modification of nanoparticle and natural fiber fillers /

İçindekiler: “…1.4.3 Surface Modification of Nanomaterials Using Surfactants1.5 Method for the Incorporation of Nanomaterials in a Polymer Matrix; 1.5.1 Sol-Gel Method; 1.5.2 Blending Method; 1.5.2.1 Solution Blending Method; 1.5.2.2 Melt Blending; 1.5.3 In Situ Polymerization; 1.6 Influence of Surface-Modified Nanomaterials on the Properties of Polymer Nanocomposites; 1.6.1 Thermal and Flame-Retardant Properties; 1.6.2 Mechanical Properties; 1.6.3 Electrical Properties; 1.7 Conclusion; Abbreviations; References; Chapter 2 Surface Modification of Boron Carbide for Improved Adhesion to an Epoxy Matrix…”
Full-text access
OPAC'ta görüntüle

Nanomaterials for Eco-friendly Applications

Full-text access
OPAC'ta görüntüle

Progress in adhesion and adhesives /

İçindekiler: “…Cover; Title Page; Copyright Page; Contents; Preface; 1 Adhesion of Condensed Bodies at Microscale: Variation with Movable Boundary Conditions; 1.1 Introduction; 1.2 Kinematics: Energy Variation with Movable Boundary Conditions; 1.3 Microbeam/plate Adhesion; 1.4 Droplet Adhesion to a Solid; 1.5 Elastica Model of CNT Adhesion; 1.6 Cell Adhesion; 1.7 Summary and Prospects; Acknowledgements; References; 2 Imparting Adhesion Property to Silicone Materials: Challenges and Solutions; 2.1 Introduction; 2.2 Cured PDMS; 2.2.1 Curing Reactions; 2.2.1.1 Free-Radical Curing; 2.2.1.2 Condensation Curing…”
Full-text access
OPAC'ta görüntüle

Proceedings of the 3rd Pan American Materials Congress

İçindekiler: “…Part 1: Pan American Materials Congress: Advanced Biomaterials -- Analysis of Biomimetic Surgical Clip Using Finite Element Modeling for Geometry Improvement and Biomaterials Selection -- Chemical composition effect of sol-gel derived bioactive glass over bioactivity behavior -- Effects of Dialium guineense based zinc nanoparticle material on the inhibition of microbes inducing microbiologically influenced corrosion -- Injectability evaluation of bone-graft substitutes based on carrageenan and hydroxyapatite nanorods -- Synthesis and characterization of Ni0.5Zn0.5Fe2O4@mSiO2 core shell nanocarrier for drug delivery applications -- Part 2: Pan American Materials Congress: Advanced Manufacturing -- Carbon Based Coatings Deposited On Nitrided Stainless Steel: Study Of Thermal Degradation -- Comparative Mechanical Analysis Between Epoxy Composite Reinforced With Random Short Cuarua Fibers And Aligned Long Curaua Fibers -- Effect of Tool Rotation on Tool Wear Phenomenon in Rotary Tool micro-USM -- Numerical Modeling of High-Velocity Impact Welding -- Selective Laser Sintering of Polyamide/Hydroxyapatite Scaffolds -- Part 3: Pan American Materials Congress: Materials for Green Energy -- A comparison between recycled spent zeolite and calcite limestone for manganese removal -- Effect of Mo6+ Substitution on Microstructure and Lithium Ionic Conductivity of Garnet-Type Li7La3Zr2O12 Solid Electrolytes by Field Assisted Sintering Technology -- Electromagnetic Levitation Refining Of Silicon-iron Alloys for Generation of Solar Grade Silicon -- Green Extract of Mate Tea as Corrosion Inhibitor of Copper and Aluminum -- Platinum Salts Synthesis as Precursors to Get Heterogeneous Catalysts for Biofuels Production -- Technical and Environmental Assessment of an Alternative Binder for Low Traffic Roads with LCA Methodology -- Part 4: Pan American Materials Congress: Materials for Infrastructure -- Anticorrosion and Adsorption Mechanism of Rhizophora mangle L Leaf-extract on Steel-reinforcement in 3.5% NaCl-immersed Concrete -- Cassia fistula leaf-extract Effect on Corrosion-inhibition of Stainless-steel in 0.5 M HCl -- Effect of C5H11NO2S on Reinforcing-steel Corrosion in Concrete Immersed in Industrial/Microbial Simulating-environment -- FIBER REINFORCED CONCRETE MANUFACTURED WITH ELECTRIC ARC FURNACE SLAG -- Jigs, hydro-cyclones and sensor-based sorting to value recycled aggregates -- Performance of hydraulic mixes manufactured with electric arc furnace slag aggregates -- POROUS ASPHALT MIXTURES WITH 100% SIDERURGIC AGGREGATES -- Part 5: Pan American Materials Congress: Materials for Oil and Gas Industry -- Blends of PVDF with its processing waste: Study of the mechanical properties of the blends thermally aged -- DYNAMIC TRANSFORMATION AND RETRANSFORMATION DURING THE SIMULATED PLATE ROLLING OF AN X70 PIPELINE STEEL -- Effect of Heat Input on the microstructure and toughness of welded API pipelines -- EVALUATION OF NON-DESTRUCTIVE TECHNIQUES (THERMOGRAPHY, ULTRASOUND AND EDDY CURRENT) FOR DETECTION OF FAILURES IN METALLIC SUBSTRATES WITH COMPOSITE ANTICORROSIVE COATINGS -- Structural Integrity of Pipelines -- Part 6: Pan American Materials Congress: Materials for Transportation and Lightweighting -- ADVANTAGES OF HOT COMPRESSION IN THE MANUFACTURE OF AlB4C COMPOSITES -- An Improved Silicon Carbide Monofilament for the Reinforcement of Metal Matrix Composites -- Analysis of coir fiber porosity -- BALLISTIC PERFORMANCE IN MULTILAYER ARMOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS -- Curaua non-woven fabric composite for ceramic multilayered armors: A lightweight, natural, and low cost alternative for KevlarTM -- Effect of Forging on Microstructure, Texture and Compression Behaviour of Extruded AZ31B -- EFFECTS OF HYPOEUTECTIC Sc ADDITIONS TO Al-4.5 wt% Cu UNDER DIFFERENT COOLING RATES -- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH FIQUE FABRIC -- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH JUTE FABRIC -- Microstructure and Hardness of Subzero Quenched and Heat Treated Ti-6Al-4V Alloy -- Nano-Additive Reinforcement of Thermoplastic Microballoon Epoxy Syntactic Foams -- Nanocomposites Mechanical and Tribological Properties using Graphene Coated Ceramic Nanoparticles for Light Weight Applications -- Synthesis of Energetic Composites in Ti-Al-B-C System by Adiabatic Explosive Compaction -- Tensile and impact properties of two fiber configurations for curaua reinforced composites -- Thermo\\8722;Mechanical behavior of nanostructure polyacrylic polymer based on Al2 O3 and bentonite nanoparticles -- Thermo\\8722;mechanical properties of waterborne acrylate hybrid nanocomposites -- Thermo-mechanical properties of copolymer/clay nanocomposites: A comparative study of production method by in-situ and solution mixture -- Part 7: Pan American Materials Congress: Minerals Extraction and Processing -- Biotechnological recycling of precious metals sourced from post-consumer products -- Biotechnologies for water recycling in the mineral industry -- Dissolution thermodynamics of smithsonite in alkaline iminodiacetate aqueous solution -- Effect of ethylenediamine on smithsonite flotation -- Extraction of Gold from sands and Slimes Tailings Dump from Mazowe Mine, Zimbabwe -- Gold Recovery from Waste Solutions of PCB Gold Plating Process using Hydro Cyclone Reactor for Demonstration Study -- Improving Quality of Coke Made from Chinese Xinjiang Gas Coal with High Strength Modifier -- INVESTIGATING THE DISSOLUTION CHARACTERISTICS OF STRONTIUM SULFIDE -- Kinetic study on the leaching of vanadium-bearing converter slag with dilute sulfuric acid -- Leaching of Spent Ni-Mo Hydrodesulphurization (HDS) Catalyst in Oxalic Acid Solutions -- Novel Adsorbent from Iron Ore Concentration Tailings for Toxic Cationic Dye Removal from Water -- Preliminary analysis of the application of sensor based sorting on a limestone mine in the region Caçapava do Sul, Brazil -- Preparation of high grade Industrial Copper Compound from a Nigerian Malachite mineral by Hydrometallurgical process -- PROCESS OF IMPROVING THE FLOTATION USING ULTRASONIC BOMBARDMENT -- Production of strontianite from celestite ore in carbonate media -- Reduction Kinetics and Characterization Study of Synthetic Magnetite Micro Fines -- Study on Leaching Valuable Elements from Bayan Obo Tailings -- Study on thermal decomposition and oxidation characteristics of iron ores -- The direct leaching of micro-disseminated gold concentrate by bromide process and the characterization of leaching products -- Working Experience with the new WOX Plant to treat zinc waelzoxide at ZGH Boleslaw SA, Poland -- Part 8: Pan American Materials Congress: Nanocrystalline and Ultra-fine Grain Materials and Bulk Metallic Glasses -- Continuous dynamic recovery in pure aluminum deformed to high strain by accumulative press bonding -- Effects of Natural Aging and Post-processed Heat Treatment on the Microstructure and Mechanical Properties of Friction Stir Processed Al-7B04 -- Evaluation of the hardening and softening effects in Zn-21Al-2Cu with as cast and homogenized microstructure processed by equal channel angular pressing -- Part 9: Pan American Materials Congress: Steels -- Effect of titanium sulfide precipitates on grain size in low carbon steel -- Evolution of Austenite Dislocation Density during Hot Deformation using a Physical Dynamic Recrystallization Model -- Influence of a Rapid Heating on the Microstructure and Properties of Press-Hardening Steel Sheets -- Jansto:New Generation Niobium Bearing Structural Steels for Future Infrastructure Demands -- Kinetic study of the austenite decomposition during continuous cooling in a welding steel -- Microstructural Evolution in Microalloyed Steels during Thermomechanical Rod Rolling -- MODELING OF METAL-SLAG MASS AND MOMENTUM EXCHANGES IN GAS-STIRRED LADLES -- Study on adjustment and optimization of LF refining slag of spring steel 55SiCrA -- Tempering Response of Bainitic and Martensitic Microstructures -- The research on the relationship between gas movement behaviors and circulating flow of the molten steel in RH.…”
Full-text access
OPAC'ta görüntüle

TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings

İçindekiler: “…Part 1: 2017 Symposium on Functional Nanomaterials: Emerging Nanomaterials and Nanotechnology -- High-performance Supercapacitors Based on Hierarchical VOx Microspheres Forming from Hyperbranched Nanoribbons -- Potential of Magnetotactic Bacteria for the Fabrication of Iron Nanoparticles -- Facile Green Synthesis and Characterization of Water-soluble Superparamagnetic Iron Oxide Nanoparticles-gold Porphyrin Conjugate for Improved Photodynamic Therapy -- Synthesis of AgNP's from Industrial Wastes -- Synthesis of Mn2O3 Nanopowders with Urea and Citric Acid by Solution Combustion Route -- Part 2: Additive Manufacturing of Metals: Establishing Location-Specific Processing-Microstructure-Property Relationships -- Evolution of Aluminum Alloys Structure at Production Phases of 3D Products by Methods of Additive Technologies -- Characterization of Multiperforated Plates Manufactured by SLM and EBM for Aeroengine Applications -- Direct Laser Metal Deposition of Eutectic Al-Si Alloy for Automotive Applications -- Additive Manufacturing to Produce Standard and Custom Alloy Titanium -- Aiming for Modeling-assisted Tailored Designs for Additive Manufacturing -- Part 3: Additive Manufacturing: Building the Pathway towards Process and Material Qualification -- The Use of Laser Ultrasound to Detect Defects in Laser Melted Parts -- SLM Process Variables and Part Geometry Optimization Based on Numerical Prediction of Process Induced Distortions -- Optimizing, Fabricating and Characterizing Additively Manufactured Process Tubing -- Scaling Relationships for Direct Ink Writing with Acoustic Focusing -- The Influence of Gas Cooling in Context of Wire Arc Additive Manufacturing: A Novel Strategy of Affecting Grain Structure and Size -- Microstructure and Mechanical Properties of Laser Deposited Ni/WC Metal Matrix Composite Coatings -- Composite Powder Consolidation Using Selective Laser Melting: Input Energy/Porosity Morphology/Balling Effect Relation -- Part 4: Advanced Characterization Techniques for Quantifying and Modeling Deformation Mechanisms -- Strain Localization Structures in Textured Magnesium AZ31 under Reversed Loading via Multi-scale Digital Image Correlation -- Deformation and Strengthening Mechanisms in AISI 321 Austenitic Stainless Steel under both Dynamic and Quasi-static Loading Conditions -- Analysis of Dislocation Structures in Ferritic and Dual Phase Steels Regarding Continuous and Discontinuous Loading Paths -- Microstructural Characterization of Inconel 600 Tubes after Tensile Tests at Various Temperatures and Strain Rates -- Part 5: Advanced High-Strength Steels -- Influences of Thermomechanical Treatments on the Microstructure Evolution and Mechanical Properties of Nano-precipitates Strengthened Steels -- Effects of Solid Solution Treatment on the Microstructure and Mechanical Properties in the Ultra-high Strength Steel Strengthened by Nanoscale Particles -- Effects of Microstructure on the Strain Rate Sensitivity of Advanced Steels -- Part 6: Advanced Materials in Dental and Orthopedic Applications -- Characterization of Chitin Synthesized from Snail Shell -- Titanium-magnesium Composite for Dental Implants (BIACOM) -- Part 7: Alloys and Compounds for Thermoelectric and Solar Cell Applications V -- Thermoelectric Behaviour of Polyvinyl Acetate /CNT Composites -- Part 8: Applications of Solidification Fundamentals -- Microstructure Characteristics of A356 Nanocomposites Manufactured Via Ultrasonic Cavitation Processing under Controlled Solidification Conditions -- Part 9: Biological Materials Science -- Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants -- Osteoporosis and fatigue fracture prevention by analysis of bone microdamage -- Bone Remodeling under Tooth Loading -- Investigating Biochemical Constituents of Cymbopogon citratus Leaf: Prospects on Total Corrosion of Concrete Steel-rebar in Acidic-Sulphate Medium -- Two-step sintering effects on the microstructure and mechanical properties of forsterite scaffolds -- Part 10: Bulk Metallic Glasses XIV -- Material Behavior in Micro Milling of Zirconium based Bulk Metallic Glass -- Part 11: Computational Thermodynamics and Kinetics -- Comparison of the Phase-field Models to Predict the Recrystallization Kinetics -- Surface Reaction and Transport in Oxides Formed on FeCrAl Alloys in High Temperature Nitridation Environments -- Atomic Scale Modeling of Fe-Al-Mn-C Alloy using Pair Models and Monte-Carlo Calculations -- Control Technique Study of Non-metallic Inclusions in Low Carbon Steel by Rare Earth Final Deoxidization -- Effect of Cooling Rate on Phase Transformation and Microstructure Evolution in a Large Size Forged Ingot of Medium Carbon Low Alloy Steel -- Formation and Control of CaS Inclusion in Gear Steel 20MnCr5 -- Investigations on the Mechanical Deformation of Amorphous Alloy Nanowires Using Phase-field Modeling and Thermodynamics Avalanche Models -- Thermodynamic Modeling of Al-Fe-Cr Ternary System -- Part 12: Defects and Properties of Cast Metals -- AModeling and Experimental Investigation on the Formation of Acicular Silicon and Sludge in High Pressure Die Casting of a Modified A383 Alloy -- Hot-tearing of Multicomponent Al-Cu Alloys Based on Casting Load Measurements in a Constrained Permanent Mold -- Effect of Molybdenum Content, Pouring Temperature and Cooling Rate on the Casting Defects of High Chromium White Cast Iron -- Effect of Various Aluminum Content on the Formation of Inclusion -- Effect of Segregated Alloying Elements on the High Strength Steel Properties: Application to the Large Size Ingot Casting Simulation -- Thermal-Mechanical Model of Depression Formation in Steel Continuous Casting -- Study for the Initiation Locations of Longitudinal Surface Cracks on Beam Blank in the Mold of Continuous Casting -- The Influence of SEN and Upper Nozzle Design on the Flow Character for the Slab Quality -- Effect of the Addition of Ce and Si on the Hot Cracking Behavior of SiMn Alloy during the Solidification Process -- Modeling and Predication of Shrinkage Porosity Formation in Steel Ingot -- Numerical Analysis of Coupled Turbulent Flow and Macroscopic Solidification in a Billet Continuous Casting Mold with Electromagnetic Stirring -- Part 13: Environmentally Assisted Cracking: Theory and Practice -- Hydrogen embrittlement and hydrogen-enhanced strain-induced vacancies in a-iron -- Factors causing hydrogen embrittlement of cold-drawn pearlitic steel fractured under elastic/plastic region -- Corrosion of Nickel-Titanium, C110, and Al6061 in Gallium-based Liquid Metal Alloys -- Part 14: General Poster Session -- Synthesis and characterization of Al-B4C powders by mechanical alloying -- Direct Conversion of Celestite to SrCO3 by Wet Milling -- Part 15: High Temperature Electrochemistry III -- Electrochemistry in Molten LiF-BeF2 Salt for Fluoride Salt-Cooled High Temperature Reactor Applications -- Impurity Removal from Titanium Oxycarbide -- Next-Generation Molten Oxide Energy Materials R&D -- Effects of Oxide Precursor Preparation Parameters on the Electrochemical Reduction of Tantalum Pentoxide in Calcium Chloride Melt -- The Effect of Temperature on Electrochemical Codeposition of Mg-Ni Hydrogen Storage Alloys from Molten Salt System -- Part 16: Materials and Fuels for the Current and Advanced Nuclear Reactors VI -- Diffusion Studies in the Development of an FCCI Barrier for High-Burnup Metallic Nuclear Fuel -- Part 17: Materials Engineering of Soft Magnets for Power and Energy Applications -- Development of Mold Inductor for Power Conversion System -- Effect of Annealing Time on the Texture of a 2.8% Si Non-Oriented Electrical Steel after Inclined and Skew Rolling -- Multi-parameter Magnetic Material Characterization for High Power Medium Frequency Converters -- Part 18: Phase Transformations and Microstructural Evolution -- An Experimental Assessment of the a +a' Miscibility Gap in Fe-Cr -- Phase Transformation, Microstructural Evolution and Property Modification in Rapidly Solidified Grey Cast Iron -- Morphologyof Order-disorder Structures in Rapidly Solidified L12intermetallics -- Part 19: Recent Developments in Biological, Structural and Functional Thin Films and Coatings -- Development of Enamel Coatings in Accordance with Recent Regulations of Food Contact Materials -- Transmission Probability of Diffusing Particles - A Case Study -- Preparation of Porous Titanium Oxide Film by Sol-Gel Method -- Part 20:…”
Full-text access
OPAC'ta görüntüle

Introduction to Refractories for Iron- and Steelmaking. Yazar: Biswas, Subir

İçindekiler: “…3.4.1.5 Thermal Expansion of the Lining and Shell -- 3.4.2 Quality Upgradation -- 3.4.2.1 Upgradation of Carbon Refractory in Hearth Lining -- 3.4.2.2 Micropore and Super Micropore Carbon -- 3.4.3 Monitoring of Refractory Condition -- 3.4.3.1 Use of Duel Thermocouple -- 3.4.3.2 Acoustoultrasonicecho Technique -- 3.4.3.3 Anomalies in Defining Refractory Lining Thickness -- 3.4.3.4 Design of Ceramic cup -- 3.4.3.5 Advantages of Using Ceramic Cup -- Cracking Mechanism -- 3.4.4 Thermal Solution -- 3.4.4.1 Formation of ``Freezing Layer -- 3.4.5 Bottom Pad Cooling Layer -- 3.4.6 Blast Furnace Repair Processes -- 3.4.6.1 Relining Process -- 3.4.6.2 Expansion of Blast Furnace Inner Volume -- 3.4.6.3 Relining Activity -- 3.4.6.4 Dismantling of Old Refractory -- 3.4.6.5 Lining of New Refractory -- 3.4.6.6 Brick Lining in Stack -- 3.4.7 Change of Stack Refractory -- 3.4.7.1 Gas-Free Atmosphere -- 3.4.7.2 Refractory Concrete for Capping -- 3.5 Cast House Refractory -- 3.5.1 Tap Hole Design -- 3.5.2 Tap Hole Clay and its Performances -- 3.5.2.1 Wear Mechanism of Tap Hole Clay -- 3.5.2.2 Moisture and Volatile Matter -- 3.5.2.3 Checking the Properties of Tap Hole Clay to Ensure Performance -- 3.5.3 Hot Metal Trough and its Design -- 3.5.3.1 Pooling Trough -- 3.5.3.2 Semi-Pooling Trough -- 3.5.3.3 Non-pooling Trough -- 3.5.4 Refractory for Hot Metal Trough and Iron Runners -- 3.5.5 Wear Mechanism -- 3.5.6 Modern Refractory Practices -- 3.5.6.1 Use of Antioxidants -- 3.5.6.2 Effect of Spinel Content on Refractory Castables -- 3.5.6.3 Effect of Silicon Carbide -- 3.5.6.4 Use of SiO2-Sol as a Binder -- 3.5.6.5 High Performance Backup Lining -- References -- Chapter 4: Hot Stove and Hot Air Carrying System -- 4.1 Introduction -- 4.2 Design of Hot Blast Stove -- 4.3 Refractory Lining Design -- 4.3.1 High Alumina Refractory in Hot Blast Stove.…”
Full-text access
OPAC'ta görüntüle

Speech Coding with Code-Excited Linear Prediction / Yazar: Bäckström, Tom

Full-text access
OPAC'ta görüntüle

Active Protective Coatings New-Generation Coatings for Metals /

Full-text access
OPAC'ta görüntüle

Ultra-High Temperature Materials II Refractory Carbides I (Ta, Hf, Nb and Zr Carbides) / Yazar: Shabalin, Igor L.

Full-text access
OPAC'ta görüntüle