Arama Sonuçları - B. F. Skinner~

Concise encyclopedia of advanced ceramic materials /

İçindekiler: “…Front Cover; Concise Encyclopedia of Advanced Ceramic Materials; Copyright Page; Table of Contents; Honorary Editorial Advisory Board; Foreword; Executive Editor's Preface; Editor's Preface; Guide to Use of the Encyclopedia; Alphabetical List of Articles; Chapter A; Advanced Ceramic Materials: An Overview; Aluminum Nitride; Aluminum Oxide; Aluminum Oxide: Biomedical Applications; Aluminum Oxide Ceramics; Aluminum Titanate; Armor; Automotive Materials; Chapter B; Beryllium Oxide; Beta-Alumina; Borides; Boron Carbide; Brittle Fracture: Micromechanics; Chapter C; Calcination; Calendering.…”
Full-text access

Ecologically Unequal Exchange Environmental Injustice in Comparative and Historical Perspective /

İçindekiler: “…Scott Frey, Paul K. Gellert, and Harry F. Dahms -- Part I: Theoretical Foundations of Ecologically Unequal Exchange -- 1. …”
Full-text access

7th International Symposium on High-Temperature Metallurgical Processing

İçindekiler: “…Copper Smelting in an Outotec® Ausmelt TSL Furnace with a UCAR® ChillKote™ Refractory System -- Enrichment of Gold in Low Grade Copper Matte from Arsenical Refractory Gold Concentrate via Matte Smelting Method -- Zinc and Refractories - A Nasty Relation -- Preliminary Study on Preparation of Al-Sc Master Alloy in Na3AlF6-K3AlF6-AlF3 Melt -- Effect of the Reductants on the Production of Iron Based Alloys from Mill Scale by Metallothermic Process -- Experimental Study on Iron-Based Alloy as Cladding Layer-Improving High Temperature Oxidation Resistance of Furnace Alloy -- Production of FeMn Alloys with Heat Treated Mn-Nodules -- Thermodynamic Analysis and Experiments on Vacuum Separation of Sn-Sb Alloy -- Simulation of Solidification Microstructure of 30Cr2Ni4MoV Steel Ingot under Different Intensities of Mechanical Oscillation -- Production of ZrB2-B4C Composite Materials via SHS Process -- Research on Microwave Roasting of ZnO and Application in Photocatalysis -- Reduction Kinetics of Hematite Concentrate Particles by CO+H2 Mixture Relevant to a Novel Flash Ironmaking Process -- SO3 Formation in Copper Smelting Process: Thermodynamic Consideration -- Effect of Oxidation on Wetting Behaviorbetween Silicon and Silicon Carbide -- Effect of CaO/SiO2 and P2O5 on the Viscosity of FeO-SiO2-V2O3-CaO-P2O5 Slags -- Heat Losses to Furnace Coolers as a Function of Process Intensity -- Viscosity of Partially Crystallized BOF Slag -- Origin and Evolution of Non-Metallic Inclusions for Al-Killed Steel during EAF-LF-VD-CC Process -- The Dynamic Dissolution of Coke with Slag in Melting and Dropping Zone -- Research on Oxidation Kinetics of SPHC Steel at 500~900°C -- Experiment Research on Direct Reduction of Celestine by Rotary Hearth Furnace Process -- Influence of Slag Basicity on theSilicon Within the Stainless Steel Master Alloy Prepared by Smelting Reduction of Fe-Ni-Cr Sinters -- Reduction Behavior of Chromic Oxide in Ti-Bearing BF Slag -- Effects of Mineral Oxides on the Precipitation Micro-Morphology of Metallic Iron in the Reduction of Iron Oxides Under CO Atmosphere -- Influence of Operation Parameters on Mass Fraction of Sulfur in the Hot Metal in COREX Process -- Influence of Operation Parameters on Sticking Behavior of Pellets in COREX Shaft Furnace -- Relationship between Coking Properties of Lump Coal and its Pulverization in COREX Process -- Thermogravimetric Analysis of Coal Used in Rotary Kiln of Iron Ore Oxide Pellet -- Enhancing the Removal of Sodium and Potassium of Sinter by CO-Containing Flue Gas Circulation Sintering Process.…”
Full-text access

High performance polymers and their nanocomposites /

İçindekiler: “…<P>Preface xv</p> <p><b>1 High-Performance Polymer Nanocomposites and Their Applications: State of Art and New Challenges 1<br /></b><i>PM Visakh</i></p> <p>1.1 Liquid Crystal Polymers 1</p> <p>1.2 Polyamide 4, 6, (PA4,6) 3</p> <p>1.3 Polyacrylamide 4</p> <p>1.4 Effect of Nanostructured Polyhedral Oligomeric Silsesquioxone on High Performance Poly(urethane-Imide) 5</p> <p>1.5 Thermoplastic Polyimide 5</p> <p>1.6 Performance Properties and Applications of Polytetrafluoroethylene (PTFE) 7</p> <p>1.7 Advances in High-Performance Polymers Bearing Phthalazinone Moieties 9</p> <p>1.8 Poly(ethylene Terephthalate)-PET and Poly(ethylene Naphthalate)-PEN 11</p> <p>1.9 High-Performance Oil Resistant Blends of Ethylene Propylene Diene Monomer (EPDM) and Epoxydized Natural Rubber (ENR) 14</p> <p>1.10 High Performance Unsaturated Polyester/f-MWCNTs Nanocomposites Induced by F- Graphene Nanoplatelets 15</p> <p><b>2 Liquid Crystal Polymers 27<br /></b><i>Andreea Irina Barzic, Raluca Marinica Albu and Luminita Ioana Buruiana </i></p> <p>2.1 Introduction and History 27</p> <p>2.2 Polymerization 29</p> <p>2.2.1 Synthesis of Lyotropic LC Polymers 30</p> <p>2.2.2 Synthesis of Thermotropic LC Polymers 31</p> <p>2.3 Properties 32</p> <p>2.3.1 Rheology 32</p> <p>2.3.2 Dielectric Behavior 35</p> <p>2.3.3 Magnetic Properties 36</p> <p>2.3.4 Mechanical Properties 36</p> <p>2.3.5 Phases and Morphology 39</p> <p>2.4 Processing 41</p> <p>2.4.1 Injection Molding 41</p> <p>2.4.2 Extrusion 42</p> <p>2.4.3 Free Surface Flow 43</p> <p>2.4.4 LC Polymer Fiber Spinning 44</p> <p>2.5 Blends Based on Liquid Crystal Ppolymers 44</p> <p>2.6 Composites of Liquid Crystal Polymers 46</p> <p>2.7 Applications 49</p> <p>2.7.1 LC Polymers as Optoelectronic Materials 49</p> <p>2.7.2 Liquid Crystalline Polymers in Displays 50</p> <p>2.7.3 Sensors and Actuators 51</p> <p>2.8 Environmental Impact and Recycling 52</p> <p>2.9 Concluding Remarks and Future Trends 54</p> <p>Acknowledgment 54</p> <p><b>3 Polyamide 4,6, (PA4,6) 59<br /></b><i>Emel Kuram and Zeynep Munteha Sahin</i></p> <p>3.1 Introduction and History 59</p> <p>3.2 Polymerization and Fabrication 60</p> <p>3.3 Properties 69</p> <p>3.4 Chemical Stability 72</p> <p>3.5 Compounding and Special Additives 72</p> <p>3.6 Processing 73</p> <p>3.7 Applications 83</p> <p>3.8 Blends of Polyamide 4,6, (PA4,6) 84</p> <p>3.9 Composites of Polyamide 4,6, (PA4,6) 89</p> <p>3.10 Nanocomposites of Polyamide 4,6, (PA4,6) 90</p> <p>3.11 Environmental Impact and Recycling 94</p> <p>3.12 Conclusions 98</p> <p><b>4 Polyacrylamide (PAM) 105<br /></b><i>Małgorzata Wiśniewska</i></p> <p>4.1 Introduction and History 105</p> <p>4.2 Polymerization and Fabrication 107</p> <p>4.3 Properties 110</p> <p>4.4 Chemical Stability 111</p> <p>4.5 Compounding and Special Additives  112</p> <p>4.6 Processing  113</p> <p>4.7 Applications  114</p> <p>4.8 Blends of Polyacrylamide  116</p> <p>4.9 Composites of Polyacrylamide  118</p> <p>4.10 Nanocomposites of Polyacrylamide  119</p> <p>4.11 Environmental Impact and Recycling  121</p> <p>4.12 Conclusions  122</p> <p><b>5 Effect of Nanostructured Polyhedral Oligomeric Silsesquioxone on High Performance Poly(urethane-imide) 133<br /></b><i>Dhorali Gnanasekaran</i></p> <p>5.1 Introduction 134</p> <p>5.2 Experimental 136</p> <p>5.3 Results and Discussion 138</p> <p>5.4 Conclusions 145</p> <p><b>6 Thermoplastic Polyimide (TPI) 149<br /></b><i>Xiantao Feng and Jialei Liu</i></p> <p>6.1 Introduction and History 149</p> <p>6.2 Polymerization and Fabrication 150</p> <p>6.2.1 Thermoplastic Polyimides Based on BEPA 150</p> <p>6.2.2 Thermoplastic Polyimides based on PMDA 153</p> <p>6.2.3 Thermoplastic Polyimides Based on BTDA 154</p> <p>6.2.4 Thermoplastic Polyimides Based on ODPA 157</p> <p>6.2.5 Thermoplastic Polyimides Based on BPDA 157</p> <p>6.2.6 Thermoplastic Copolyimides 158</p> <p>6.3 Properties 160</p> <p>6.3.1 TPI Based on BEPA 160</p> <p>6.3.2 Thermoplastic Polyimides based on PMDA 163</p> <p>6.3.3 TPI Based on ODPA 163</p> <p>6.3.4 Thermoplastic Polyimides Based on BPDA 168</p> <p>6.3.5 Thermoplastic Copolyimides 170</p> <p>6.4 Chemical Stability 170</p> <p>6.4.1 Hydrolytic Stability 170</p> <p>6.4.2 Oxidative Stability 174</p> <p>6.5 Compounding 175</p> <p>6.5.1 Chloromethylation 175</p> <p>6.5.2 Sulfonation 178</p> <p>6.5.3 Phosphorylation 178</p> <p>6.5.4 Bromination 178</p> <p>6.5.5 Arylation 181</p> <p>6.6 Processing 181</p> <p>6.6.1 Injection Molding 181</p> <p>6.6.2 Compression Molding 182</p> <p>6.6.3 Extrusion Molding 184</p> <p>6.6.4 Coating 184</p> <p>6.6.5 Spinning [40] 186</p> <p>6.7 Applications 186</p> <p>6.7.1 Membranes 186</p> <p>6.7.2 Adhesives 188</p> <p>6.7.3 Composites 189</p> <p>6.7.3.1 Skybond 190</p> <p>6.7.4 Engineering Plastics 190</p> <p>6.7.4.1 VESPEL Plastics 190</p> <p>6.7.4.2 ULTEM Plastics [48, 49] 191</p> <p>6.7.4.3 AURUM Plastics [50] 192</p> <p>6.7.4.3 Ratem Plastics [51] 192</p> <p>6.8 Blends of Thermoplastic Polyimide (TPI) 193</p> <p>6.8.1 TPI Blends with TPI 193</p> <p>6.8.2 Polyamic Acid Blending 195</p> <p>6.9 Composites of Thermoplastic Polyimide (TPI) 196</p> <p>6.9.1 LaRC Composites 197</p> <p>6.9.2 Skybond 202</p> <p>6.9.3 PAI Polyamide-Imide Composites 205</p> <p>6.10 Nanocomposites of Thermoplastic Polyimide (TPI) 208</p> <p>6.10.1 TPI/silver Nanocomposite 208</p> <p>6.10.2 TPI/Fe-FeO Nanocomposite 210</p> <p>6.10.3 TPI/Carbon Nanocomposites 211</p> <p>6.10.4 TPI/CF/TiO2 Nanocomposite 214</p> <p>6.11 Environmental Impact and Recycling 214</p> <p>6.12 Conclusions 215</p> <p><b>7 Performance Properties and Applications of Polytetrafluoroethylene (PTFE) -- A Review 221<br /></b><i>E. …”
Full-text access

Light Metals 2017

İçindekiler: “…Part 1: Alumina & Bauxite: Digestion and Calcination -- CFB Alumina Calciners - New and Future Generation Opportunities for Green Field Refineries -- Evolutional Development of Alkaline Aluminosilicates Processing Technology -- Characterization and Ore Dressing of Bauxite from Brazil -- Process Optimization for Diaspore Digestion Equilibrium using Response Surface Methodology -- Thermodynamic analysis and formation law of Q phase of calcium aluminate clinker -- Leaching Behavior of Alumina from Smelting Reduction Calcium Aluminate Slag with Sodium Carbonate Solution -- Part 2: Alumina & Bauxite: Bauxite Residues Technology -- Security Disposal and Comprehensive Utilization of Bauxite Residues -- Bauxite Residue Amendment Through the Addition of Ca and OR Mg Followed By Carbonation -- Application of Tricalcium Aluminate Instead of Lime for the recovery of aluminum in Middle-low Grade Bauxite in Calcification-Carbonization Process -- Low Temperature Reduction of Hematite in Red-Mud to Magnetite -- Recovery of Iron-, Titanium-bearing Constituents from Bauxite Ore Residue via Magnetic Separation Followed by Sulfuric Acid Leaching -- Processing diasporic red mud by the calcification-carbonation method -- Research of Flocculants and Dewatering Additives for Filtration of Red Mud -- Characterization of activated alumina production via spray pyrolysis -- Part 3: Alumina & Bauxite: Non-traditional Resources -- New process research on aluminium production from non-traditional aluminum resource by microwave chlorination -- Opportunities of pseudoboehmite processing from aluminum content raw material at sintering method -- Chemical Alumina Preparation by Using High Alumina Content Fly Ash -- A Novel Process of Alumina Production from Low-grade Bauxite Containing Sulfur -- Iron separation from bauxite through smelting-reduction process -- Thermodynamic behavior of lime desulfurization in sodium aluminate solution -- Part 4: Alumina & Bauxite: Poster Session -- A study on optimization ofprocessing parameters for synthesis of calcium hydroaluminosulfate using response surface methodology -- Part 5: Aluminum Alloys, Processing and Characterization: Alloy Development and Applications -- Design of New 6xxx Series Al Alloy Using the CALPHAD Thermodynamic Database -- Study of an Al-Ca Alloy with Low Young's Modulus -- Production Of 3004 Aluminum Alloy Sheet For Structural Applications From Twin Roll Casting -- Aluminum alloys with tailored TiB2 particles for composite applications -- Development of low expansion and high strength aluminium hybrid composite -- Part 6: Aluminum Alloys, Processing and Characterization: Solidification and Casting -- A model for a-Al(Mn,Fe)Si crystals -- Casting Characteristics of High Cerium Content Aluminum Alloys -- In-situ observation of fragmentation of primary crystals by ultrasonic cavitation in water -- The enhancement of mechanical properties of A356 alloy solidified at lower cooling rate via effectively grain refinement -- Secondary Aluminum Alloys Processed by Semisolid Process for Automotive Application -- Integrated casting-extrusion of an AA6082 aluminum alloy -- On Porosity Formation in Al-Si-Cu Cast Alloys -- Part 7: Aluminum Alloys, Processing and Characterization: Characterization -- Algorithm for Finding the Correlation between the Properties of Wrought Aluminum Alloys, the Chemical Composition and the Processing Parameters -- Analysis of an aluminium alloy containing trace elements -- Determination of aluminum oxide thickness on the annealed surface of 8000 series aluminum Foil by Fourier Transform Infrared Spectroscopy -- Test Uncertainty in Chemical Composition Analysis -- Real Time 3D Imaging and Laser Marking System for Industrial Traceability -- Production and Certification of Arconic Certified Reference Materials -- Characterization of Large Strain Extrusion Machining (LSEM) of AA7050 -- Interaction between fatigue micro-cracks and inclusion/matrix interface in high-strength Al alloy -- Influence of trace element additionson Fe bearing intermetallic solidification of a 6063 Al alloy -- Part 8: Aluminum Alloys, Processing and Characterization: Heat Treatment -- THE OPTIMIZATION OF THE HOMOGENIZATION TREATMENT OF AA7075 -- Precipitation modeling and validation of Al-5%Cu-0.4%Mn alloy using quench factor analysis -- Young's modulus of Al-Si-Mg-Cu based alloys under different heat treatment processes -- Intergranular Corrosion Investigation on EN-AW 6082 Redraw Rod -- The influence of process parameters and thermomechanical history on streaking defects in AA6060 extrusions -- Effect of Heat-treatment on Microstructure and Mechanical Properties of Sonicated Multicomponent AlMgSiCuZn Alloy -- Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys -- Part 9: Aluminum Alloys, Processing and Characterization: Plasticity and Mechanical Behavior -- New Yield Criterion for Description of Plastic Deformation of Face-Centered Cubic Single Crystals -- Quantifying As-cast and Homogenized AA7050 Mechanical Properties through Compression Testing -- Determining a Stable Texture Condition Under Complex Strain Path Deformations in Face Centered Cubic Metals -- Microstructural transition and elevated temperature tensile properties of modified Al-Si-Cu-Mg alloys -- Effects of alloying elements on anneal-hardening behavior of aluminum alloy foils -- Increasing strength and corrosion resistance of AlMgSi alloys by tailor-made thermomechanical processing -- Microstructural optimization of a High Mechanical Properties (HMP) aluminum alloy by using CobaPress™ process -- Cyclic Stress-strain Behavior and Low Cycle Fatigue Life of AA6061 Aluminum Alloy -- Part 10: Aluminum Alloys, Processing and Characterization: Poster Session -- Corrosion of Al-Mg Alloys in Ethanol -- Warm pressing of Al powders: an alternative consolidation approach -- Part 11: Aluminum Reduction Technology: Dry Scrubbing, Alumina Transport and Dissolution -- Spreading of Alumina and Raft Formation on the Surface of Molten Cryolite -- Fluoride Capture Capacity of SGA: The Interplay between Particle and Pore Size Distribution -- Predictive Formulae for the Competitive Adsorption of HF and SO2 on Smeltergrade Alumina Used in Dry Scrubbing Applications -- Pot Gas Treatment at High Gas Temperatures -- Influence of Handling Parameter on Powder Properties -- Part 12: Aluminum Reduction Technology: Anode Effect and PFC Emissions -- Preventive Treatment of Anode Effects Using On-Line Individual Anode Current Monitoring -- Reduction in EGA Jebel Ali Potroom GHG Emissions -- Partial Anode Effect in a Two-Compartment Laboratory Alumina Reduction Cell -- Co-evolution of Carbon Oxides and Fluorides during the Electrowinning of Aluminium with Molten NaF-AlF3-CaF2-Al2O3 Electrolytes -- Part 13: Aluminum Reduction Technology: Cell Lining Materials -- Chemical stability of thermal insulating materials in sodium vapour environment -- AGING OF INSULATING LININGS IN ALUMINIUM ELECTROLYSIS CELLS -- Cathode Wear Based on Autopsy of a Shut down Aluminium Electrolysis Cell -- SPL Recycling and Re-Processing -- Alternative applications of SPL: Testing ideas through experiments and mathematical modeling -- Part 14: Aluminum Reduction Technology: Cell Voltage and Pot Control -- Clustering Aluminium Reduction Cells -- Application of Multivariate Statistical Process Control with STARprobeTM Measurements in Aluminium Electrolysis Cells -- Study Of Impact Of The Anode Slots On The Voltage Fluctuations Of Aluminium Electrolysis Cell Using Bubble Layer Simulator -- Detecting, Identifying and Managing Systematic Potline Issues with Generation 3 Process Control -- Predicting Instability and Current Efficiency of Industrial Cells -- Part 14: Aluminum Reduction Technology: Electrolyte and Fundamentals -- Sodium in Aluminium as a Cell Performance Indicator: A Quantitative Framework -- Bauxite processing via chloride route to produce chloride products and subsequent electrolysis of aluminium chloride to produce aluminium metal -- Stability of Chlorides in Cryolitic Electrolyte -- Role of Heat Transfer in the Formation of Carbon Oxides in Smelting Cells -- Part 15: Aluminum Reduction Technology: Modelling and Cell Design -- Improving The Understanding Of BUSBAR Design And Cell MHD Performance -- LES turbulence modeling approach for molten aluminium and electrolyte flow in aluminum electrolysis cell -- MHD of Large Scale Liquid Metal Batteries -- Low energy consumption cell designs involving…”
Full-text access

TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings

İçindekiler: “…Part 1: 2017 Symposium on Functional Nanomaterials: Emerging Nanomaterials and Nanotechnology -- High-performance Supercapacitors Based on Hierarchical VOx Microspheres Forming from Hyperbranched Nanoribbons -- Potential of Magnetotactic Bacteria for the Fabrication of Iron Nanoparticles -- Facile Green Synthesis and Characterization of Water-soluble Superparamagnetic Iron Oxide Nanoparticles-gold Porphyrin Conjugate for Improved Photodynamic Therapy -- Synthesis of AgNP's from Industrial Wastes -- Synthesis of Mn2O3 Nanopowders with Urea and Citric Acid by Solution Combustion Route -- Part 2: Additive Manufacturing of Metals: Establishing Location-Specific Processing-Microstructure-Property Relationships -- Evolution of Aluminum Alloys Structure at Production Phases of 3D Products by Methods of Additive Technologies -- Characterization of Multiperforated Plates Manufactured by SLM and EBM for Aeroengine Applications -- Direct Laser Metal Deposition of Eutectic Al-Si Alloy for Automotive Applications -- Additive Manufacturing to Produce Standard and Custom Alloy Titanium -- Aiming for Modeling-assisted Tailored Designs for Additive Manufacturing -- Part 3: Additive Manufacturing: Building the Pathway towards Process and Material Qualification -- The Use of Laser Ultrasound to Detect Defects in Laser Melted Parts -- SLM Process Variables and Part Geometry Optimization Based on Numerical Prediction of Process Induced Distortions -- Optimizing, Fabricating and Characterizing Additively Manufactured Process Tubing -- Scaling Relationships for Direct Ink Writing with Acoustic Focusing -- The Influence of Gas Cooling in Context of Wire Arc Additive Manufacturing: A Novel Strategy of Affecting Grain Structure and Size -- Microstructure and Mechanical Properties of Laser Deposited Ni/WC Metal Matrix Composite Coatings -- Composite Powder Consolidation Using Selective Laser Melting: Input Energy/Porosity Morphology/Balling Effect Relation -- Part 4: Advanced Characterization Techniques for Quantifying and Modeling Deformation Mechanisms -- Strain Localization Structures in Textured Magnesium AZ31 under Reversed Loading via Multi-scale Digital Image Correlation -- Deformation and Strengthening Mechanisms in AISI 321 Austenitic Stainless Steel under both Dynamic and Quasi-static Loading Conditions -- Analysis of Dislocation Structures in Ferritic and Dual Phase Steels Regarding Continuous and Discontinuous Loading Paths -- Microstructural Characterization of Inconel 600 Tubes after Tensile Tests at Various Temperatures and Strain Rates -- Part 5: Advanced High-Strength Steels -- Influences of Thermomechanical Treatments on the Microstructure Evolution and Mechanical Properties of Nano-precipitates Strengthened Steels -- Effects of Solid Solution Treatment on the Microstructure and Mechanical Properties in the Ultra-high Strength Steel Strengthened by Nanoscale Particles -- Effects of Microstructure on the Strain Rate Sensitivity of Advanced Steels -- Part 6: Advanced Materials in Dental and Orthopedic Applications -- Characterization of Chitin Synthesized from Snail Shell -- Titanium-magnesium Composite for Dental Implants (BIACOM) -- Part 7: Alloys and Compounds for Thermoelectric and Solar Cell Applications V -- Thermoelectric Behaviour of Polyvinyl Acetate /CNT Composites -- Part 8: Applications of Solidification Fundamentals -- Microstructure Characteristics of A356 Nanocomposites Manufactured Via Ultrasonic Cavitation Processing under Controlled Solidification Conditions -- Part 9: Biological Materials Science -- Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants -- Osteoporosis and fatigue fracture prevention by analysis of bone microdamage -- Bone Remodeling under Tooth Loading -- Investigating Biochemical Constituents of Cymbopogon citratus Leaf: Prospects on Total Corrosion of Concrete Steel-rebar in Acidic-Sulphate Medium -- Two-step sintering effects on the microstructure and mechanical properties of forsterite scaffolds -- Part 10: Bulk Metallic Glasses XIV -- Material Behavior in Micro Milling of Zirconium based Bulk Metallic Glass -- Part 11: Computational Thermodynamics and Kinetics -- Comparison of the Phase-field Models to Predict the Recrystallization Kinetics -- Surface Reaction and Transport in Oxides Formed on FeCrAl Alloys in High Temperature Nitridation Environments -- Atomic Scale Modeling of Fe-Al-Mn-C Alloy using Pair Models and Monte-Carlo Calculations -- Control Technique Study of Non-metallic Inclusions in Low Carbon Steel by Rare Earth Final Deoxidization -- Effect of Cooling Rate on Phase Transformation and Microstructure Evolution in a Large Size Forged Ingot of Medium Carbon Low Alloy Steel -- Formation and Control of CaS Inclusion in Gear Steel 20MnCr5 -- Investigations on the Mechanical Deformation of Amorphous Alloy Nanowires Using Phase-field Modeling and Thermodynamics Avalanche Models -- Thermodynamic Modeling of Al-Fe-Cr Ternary System -- Part 12: Defects and Properties of Cast Metals -- AModeling and Experimental Investigation on the Formation of Acicular Silicon and Sludge in High Pressure Die Casting of a Modified A383 Alloy -- Hot-tearing of Multicomponent Al-Cu Alloys Based on Casting Load Measurements in a Constrained Permanent Mold -- Effect of Molybdenum Content, Pouring Temperature and Cooling Rate on the Casting Defects of High Chromium White Cast Iron -- Effect of Various Aluminum Content on the Formation of Inclusion -- Effect of Segregated Alloying Elements on the High Strength Steel Properties: Application to the Large Size Ingot Casting Simulation -- Thermal-Mechanical Model of Depression Formation in Steel Continuous Casting -- Study for the Initiation Locations of Longitudinal Surface Cracks on Beam Blank in the Mold of Continuous Casting -- The Influence of SEN and Upper Nozzle Design on the Flow Character for the Slab Quality -- Effect of the Addition of Ce and Si on the Hot Cracking Behavior of SiMn Alloy during the Solidification Process -- Modeling and Predication of Shrinkage Porosity Formation in Steel Ingot -- Numerical Analysis of Coupled Turbulent Flow and Macroscopic Solidification in a Billet Continuous Casting Mold with Electromagnetic Stirring -- Part 13: Environmentally Assisted Cracking: Theory and Practice -- Hydrogen embrittlement and hydrogen-enhanced strain-induced vacancies in a-iron -- Factors causing hydrogen embrittlement of cold-drawn pearlitic steel fractured under elastic/plastic region -- Corrosion of Nickel-Titanium, C110, and Al6061 in Gallium-based Liquid Metal Alloys -- Part 14: General Poster Session -- Synthesis and characterization of Al-B4C powders by mechanical alloying -- Direct Conversion of Celestite to SrCO3 by Wet Milling -- Part 15: High Temperature Electrochemistry III -- Electrochemistry in Molten LiF-BeF2 Salt for Fluoride Salt-Cooled High Temperature Reactor Applications -- Impurity Removal from Titanium Oxycarbide -- Next-Generation Molten Oxide Energy Materials R&D -- Effects of Oxide Precursor Preparation Parameters on the Electrochemical Reduction of Tantalum Pentoxide in Calcium Chloride Melt -- The Effect of Temperature on Electrochemical Codeposition of Mg-Ni Hydrogen Storage Alloys from Molten Salt System -- Part 16: Materials and Fuels for the Current and Advanced Nuclear Reactors VI -- Diffusion Studies in the Development of an FCCI Barrier for High-Burnup Metallic Nuclear Fuel -- Part 17: Materials Engineering of Soft Magnets for Power and Energy Applications -- Development of Mold Inductor for Power Conversion System -- Effect of Annealing Time on the Texture of a 2.8% Si Non-Oriented Electrical Steel after Inclined and Skew Rolling -- Multi-parameter Magnetic Material Characterization for High Power Medium Frequency Converters -- Part 18: Phase Transformations and Microstructural Evolution -- An Experimental Assessment of the a +a' Miscibility Gap in Fe-Cr -- Phase Transformation, Microstructural Evolution and Property Modification in Rapidly Solidified Grey Cast Iron -- Morphologyof Order-disorder Structures in Rapidly Solidified L12intermetallics -- Part 19: Recent Developments in Biological, Structural and Functional Thin Films and Coatings -- Development of Enamel Coatings in Accordance with Recent Regulations of Food Contact Materials -- Transmission Probability of Diffusing Particles - A Case Study -- Preparation of Porous Titanium Oxide Film by Sol-Gel Method -- Part 20:…”
Full-text access