Arama Sonuçları - Cao Pi*

Elderly Care, Intergenerational Relationships and Social Change in Rural China Yazar: Cao, Fang

Full-text access
OPAC'ta görüntüle

Proceedings of ELM-2017

Full-text access
OPAC'ta görüntüle

Proceedings of ELM-2016

Full-text access
OPAC'ta görüntüle

8th International Symposium on High-Temperature Metallurgical Processing

Full-text access
OPAC'ta görüntüle

7th International Symposium on High-Temperature Metallurgical Processing

İçindekiler: “…Flash Reduction of Magnetite and Hematite Concentrates with Hydrogen in a Lab-Scale Reactor for a Novel Ironmaking Process -- Investigation of Coal Tar Pitch Binder for the Production of Formed Coal Briquettes for COREX from High Volatile Coal Powder -- Upgrading of Iron-Rich Titanium Minerals Using a Molten Salt Process -- Direct Electrolytic Production of Mo-Si-Ti-C Composites from Their Oxides/Sulfide/Carbon Mixture Precursor in Molten Salt -- Reduction Kinetics of Magnetite Concentrate Particles with H2 + CO at 1200 to 1600 °C Relevant to a Novel Ironmaking Process -- Advanced Oxygen Lances for Safer Furnace Tapping Operations -- Utilization of Pine Nut Shell for Preparation of High Surface Area Activated Carbon by Microwave Heating and KOH Activation -- Research on High Temperature Mechanical Properties of 50Cr5MoV Roll Steel -- Separation of Rhenium and Molybdenum from Molybdenite Concentrate by Microwave-Assisted Roasting -- Active Oxidation and Fume Formation from Liquid SiMn -- Research on Enrichment of MFe and RO Phase from Converter Steel Slag by Super Gravity -- Volatilization of Rhenium from Molybdenite Concentrate by Oxidative Roasting -- Kinetic Investigation of the Electric Furnace Copper Slag Treatment -- The Extraction of Zinc from Willemite by Calcified-Roasting and Ammonia-Leaching Process Based on Phase Reconstruction -- An Investigation on Antimony Production by Using Niederschlag Process -- Oxygen-Rich Side Blow Bath Smelting Technology - New Developments in China -- Carbon Refractories in an Oxidizing Process? …”
Full-text access
OPAC'ta görüntüle

The Emerald handbook of crime, justice and sustainable development /

İçindekiler: “…Pino. -- Chapter 3: Responding to Organized Crime through Sustainable Development: Tensions and Prospects; Sasha Jesperson. -- Chapter 4: A Marxist Perspective on the 2030 Agenda for Sustainable Development; Valeria Vegh Weis and Rob White. …”
Full-text access
OPAC'ta görüntüle

Conjugated polyelectrolytes : fundamentals and applications /

Full-text access
OPAC'ta görüntüle

10th International Symposium on High-Temperature Metallurgical Processing

İçindekiler: “…Ironmaking, Steelmaking and Casting -- Optimization of Exothermic Riser Sleeve Design Parameters -- Assessment of Gas-Slag-Metal Interaction during a Converter Steelmaking Process -- On the Role of Nb on the Texture and Mechanical Properties of a Novel As-rolled Medium Carbon Wear Resistant Slurry Pipeline Steel -- A Statistical Analysis of Process Abnormalities in Slab Casting -- Effect of Density Difference on Particle Segregation Behaviors at Bell-less Top Blast Furnace with Parallel-type Hopper -- The Effect of Austenitizing Temperature on Hardenability, Precipitation and Mechanical Properties of Boron Bearing Cr-Mo Alloy Steel -- Part 8. …”
Full-text access
OPAC'ta görüntüle

9th International Symposium on High-Temperature Metallurgical Processing

İçindekiler: “…Ironmaking, Steelmaking and Casting -- Optimization of Exothermic Riser Sleeve Design Parameters -- Assessment of Gas-Slag-Metal Interaction during a Converter Steelmaking Process -- On the Role of Nb on the Texture and Mechanical Properties of a Novel As-rolled Medium Carbon Wear Resistant Slurry Pipeline Steel -- A Statistical Analysis of Process Abnormalities in Slab Casting -- Effect of Density Difference on Particle Segregation Behaviors at Bell-less Top Blast Furnace with Parallel-type Hopper -- The Effect of Austenitizing Temperature on Hardenability, Precipitation and Mechanical Properties of Boron Bearing Cr-Mo Alloy Steel -- Part 8. …”
Full-text access
OPAC'ta görüntüle

Rare Metal Technology 2019

İçindekiler: “…Rare Earth Element I -- The Demonstration Pilot Plant Results for the Search Minerals Direction Extraction Process for Rare Earth Recovery -- Selective Oxidation of Cerium in Rare Earth Solutions, a Comparison of Four Oxidants -- A study on the effect of crystal habit modifiers on the co-precipitation of REE with gypsum -- Beneficiation and Leaching Study of Norra Karr Eudialyte Mineral -- Review on the Processes for the Recovery of Rare Earth Metals (REMs) from Secondary Resources -- Selective Reduction and Separation of Europium from Mixed Rare-earth Oxides Recovered from Waste Fluorescent Lamp Phosphors -- Study of the Mechanochemical Calcification for Mixed Rare Earth Concentrate -- Part 2. …”
Full-text access
OPAC'ta görüntüle

Rare Metal Technology 2018

İçindekiler: “…Rare Earth Element I -- The Demonstration Pilot Plant Results for the Search Minerals Direction Extraction Process for Rare Earth Recovery -- Selective Oxidation of Cerium in Rare Earth Solutions, a Comparison of Four Oxidants -- A study on the effect of crystal habit modifiers on the co-precipitation of REE with gypsum -- Beneficiation and Leaching Study of Norra Karr Eudialyte Mineral -- Review on the Processes for the Recovery of Rare Earth Metals (REMs) from Secondary Resources -- Selective Reduction and Separation of Europium from Mixed Rare-earth Oxides Recovered from Waste Fluorescent Lamp Phosphors -- Study of the Mechanochemical Calcification for Mixed Rare Earth Concentrate -- Part 2. …”
Full-text access
OPAC'ta görüntüle

Extraction 2018 Proceedings of the First Global Conference on Extractive Metallurgy /

İçindekiler: “…Hydrometallurgy 2018 -- Hydrometallurgical Extraction of Lead in Brine Solution from a TSL Processed Zinc Plant Residue -- Alkaline Metals Removal from Radioactive Wastewater by Combined CO2 Capture and Adsorption into Bone Char -- Synthesis and Properties Characterization of Crystalline Polyferric Sulfate Adsorbent Used for Treating High As()-content Contaminated Water -- Custom Fiberglass Reinforced Plastic Piping (FRP) Applications in Mineral Processing -- Electrochemical Behavior of Chalcopyrite in Presence of Sodium Peroxodisulfate -- Alternative Lixiviant for Copper Leaching fromChalcopyrite Concentrate -- Hydrometallurgical Processing of Copper-Arsenic Concentrates -- Sustainable Development Considerations in Copper Hydrometallurgy -- Improved Process for Leaching Refractory Copper Sulfides with Hydrogen Peroxide in Aqueous Ethylene Glycol Solutions -- Copper Recovery from the Mine Tailings by Combination of Flotation with Highpressure Oxidative Leaching and Solvent Extraction -- Douglas Centenary Commemoration - 1918-2018 Engineering the Science: James Douglas, Early Hydrometallurgy and Chile -- Making the Right Selection: A Comparative Analysis for the Treatment of Refractory Gold Concentrates -- Evolution of Metallurgical Parameters at Mantoverde Heap Leaching Operation -- The Effect of Aeration on Chalococite Heap Leaching -- Study of the Diffusion of Cu(II) as an Oxidant Through Simulated Particle Pores in a Novel Model Apparatus -- Filtration Properties of Ferric Hydroxide Precipitate in Nickel Production -- The Effects of Experimental Variable.…”
Full-text access
OPAC'ta görüntüle

Industrial chemistry of oxides for emerging applications / Yazar: Pawłowski, Lech, Blanchart, Philippe

Full-text access
OPAC'ta görüntüle

RILEM 252-CMB Symposium Chemo-Mechanical Characterization of Bituminous Materials /

İçindekiler: “…, by Tomas Koudelka, Pavel Coufalik, Michal Varaus, and Iva Coufalikova -- Study on the Mechanical Properties of Waste Cooking Oil Modified Asphalt Binder, by Xin Qu, Dawei Wang, Quan Liu, Markus Oeser, Chao Wang -- The Effect of the Nature of Rejuvenators on the Rheological Properties of Aged Asphalt Binders, by Raúl Tauste, Fernando Moreno-Navarro, Miguel Sol-Sánchez, Mª Carmen Rubio-Gámez -- Part VI Chemo-Mechanical Characterization of Bituminous Materials: Multiphase Analysis of Binders -- Effect of Recycled Materials on Intermediate Temperature Cracking Performance of Asphalt Mixtures, by Wei Cao, Louay Mohammad, Peyman Barghabany -- Investigation of the Calculation Modeling of Asphalt Binder Surface Energy based on the Atomic Force Microscope (AFM), by Rong Chang, Erhu Yan, Jian Xu, GaoChao Wang -- Qualitative Detection of the Presence of Gilsonite in the Bituminous Blends based on thin Layer Chromatography, by Michalina Makowska, Terhi Pellinen -- Resistance to Moisture-Induced Damage of Asphalt Mixtures and Aggregate-Binder Interfaces, by Jorge Lucas Júnior, Lucas Babadopulos, Jorge Soares -- Study on Effects of Aging on SBS Modified Asphalt Based on GPC and Rheological Methods, by Daisong Luo, Meng Guo, Yiqiu Tan, Yafei Li -- Part VII Chemo-Mechanical Characterization of Bituminous Materials: Other Approaches -- How to Evaluate with Relevance the Compactability of Warm Mixes Using the Gyratory Compactor (GC), by Abdeldjalil Daoudi, Anne Dony, Layella Ziyani, Nicolas Picard, Julien Buisson -- Hybrid Approach to Characterize Reflective Cracking in Airport Pavements, by Tirupan Mandal, Mesbah Ahmed, and Hao Yin, Richard Ji -- Kinetic Analysis of the Thermal Behavior of the Sap of the Petroleum Plant for Producing Bio-Binders, by Gondim Lilian Medeiros, Soares Sandra de Aguiar, Barroso Suelly Helena de Araújo -- Machine Learning Technique for Interpretation of Infrared Spectra Measured on Polymer Modified Binders, by Adam Zofka, Krzysztof Błażejowski -- Meso- to Macroscale Homogenisation of Hot Mix Asphalt Considering Viscoelasticity and the Critical Role of Mortar, by Johannes Neumann -- Novel Application of the Falling Weight Deflectometer Test: Detection of Surface and Subsurface Distresses, by A. …”
Full-text access
OPAC'ta görüntüle

Characterization of Minerals, Metals, and Materials 2019

İçindekiler: “…Characterization and Uses of Metallurgical Slags -- Preparation and Characterization of NaNO3/BFS Composite Phase Change Materials -- Characteristics of WISCO Steelmaking Slags -- Effects of Civil Construction Waste on Properties of Lining Mortars -- Pilot Trial of Direct Modification of Molten Blast Furnace Slag and Production of High Acidity Coefficient Slag Wool Fibers -- Reduction Behavior of Ternary Calcium Ferrites for CaO-Fe2O3-MgO System -- Propagation of Power Ultrasound in Calcium Ferrite Melt -- Part 6. …”
Full-text access
OPAC'ta görüntüle

Characterization of Minerals, Metals, and Materials 2018

İçindekiler: “…Characterization and Uses of Metallurgical Slags -- Preparation and Characterization of NaNO3/BFS Composite Phase Change Materials -- Characteristics of WISCO Steelmaking Slags -- Effects of Civil Construction Waste on Properties of Lining Mortars -- Pilot Trial of Direct Modification of Molten Blast Furnace Slag and Production of High Acidity Coefficient Slag Wool Fibers -- Reduction Behavior of Ternary Calcium Ferrites for CaO-Fe2O3-MgO System -- Propagation of Power Ultrasound in Calcium Ferrite Melt -- Part 6. …”
Full-text access
OPAC'ta görüntüle

Magnesium Technology 2017

İçindekiler: “…Part 1: Magnesium Technology 2017: Keynote Session I -- Multi-scale Investigation on Yield "Symmetry" and Reduced Strength Differential in an Mg-Y Alloy -- Targeting High Impact R&D for Automotive Magnesium Alloys -- Magnesium Development as a Lightweight Material - In Competition with Other Structural Materials -- The Continued Quest for Low-Temperature Formability in Mg Alloys: Historical Developments and Future Opportunities -- Part 2: Magnesium Technology 2017: Alloy Development -- Using the Crystal Plasticity Approach to Parse the Effects of Alloying and Aging on the Mechanical Behavior of Wrought Mg Alloys -- Development of high-strength high-speed-extrudable Mg-Al-Ca-Mn alloy -- Development of ultra-high strength and ductile Mg-Gd-Y-Zn-Zr alloys by extrusion with forced-air cooling -- Effect of Extrusion Ratio on Microstructure and Resulting Mechanical Properties of Mg Alloys with LPSO Phase -- Mechanically Alloyed Magnesium Based Nanostructured Alloy Powders for Stent Applications -- Combined Effects of Grain Size Refinement and Dynamic Precipitation on Mechanical Properties of a New Magnesium -- Alloy -- Machinability Investigation in Micro-milling of Mg based MMCs with Nano-sized Particles -- Part 3: Magnesium Technology 2017: Solidification and Processing I -- Microsegregation in High Pressure Die Cast Mg Alloys -- Numerical simulations of TRC equipped with a core -- Growth of Al8Mn5 intermetallic in AZ91 -- Influence of CaO grain refiner addition on the microstructure and mechanical properties of as-cast Mg alloys -- Grain refinement of Mg and its alloy by inoculation of in-situ MgO particles -- Numerical study of magnesium production by Pidgeon process and pre-prepared pellets silicothermic process: comparison of heat transfer -- On the age hardening response of aluminum containing magnesium sheets with zinc or manganese (AZ- and AM series alloys) -- Performance evaluation of high-pressure die-cast magnesium alloys -- Simulation Study on Direct Desulfurization ofMolten Iron by Magnesium Vapor -- Part 4: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue I -- Twinning super dislocations to help understand strength -- Basal Dislocation Transmutation through {1012} Twin Boundaries -- Ductility Enhancement in Mg alloys by Anisotropy Engineering -- Modeling the effect of alloying elements in magnesium on deformation twin characteristics -- Simulating Discrete Twin Evolution in Magnesium using a Novel Crystal Plasticity Finite Element Model -- The effect of {10-12} twin boundary on the evolution of defect substructure -- Part 5: Magnesium Technology 2017: Solidification and Processing II -- Processing of Mg-sheet via Twin Roll Casting -- Effects of Mn and Zn Solutes on Grain Refinement of Commercial Pure Magnesium -- Experimental investigation of continuous magnesium production by carbothermal reduction -- Precipitation behavior of Mg-Al-Sn-Zn(-Na) alloys -- Study on the Direct Oxidation Thermal Decomposition of MagnesiumChloride byproduct in the Sponge Titanium -- Thermal decomposition kinetics of pre-prepared pellets for the novel silicothermic process -- Thermal Stability of Cryomilled Mg Alloy Powder -- Thermomechanical Processing of Thixomolded Alloys -- Part 6: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue II -- Dynamic behavior of an AZ31 alloy under varying strain rates and stress triaxialities -- Enhancing the tensile response of magnesium through simultaneous addition of aluminium and alumina nanoparticulates -- Effect of solutes additions on the microstructure and mechanical properties of cast Mg-Al based alloys -- Enhanced mechanical properties of extruded Mg-9mass%Al-1mass%Zn-2mass%Ca alloy -- Influence of strain path change on the microstructure and mechanical properties of duplex Mg-Li alloy -- Mechanical Properties and Deformation Mechanism of Mg-Y Alloy with Various Grain Sizes -- Microstructure and Mechanical Properties of High Pressure Die Cast Mg-Al-Sn-Si Alloys -- Microstructure and mechanical properties of an extruded Mg-1.58Zn-0.52Gd alloy -- Modelling Magnesium Alloys for Improved Isotropic and Symmetric Yield Behaviour -- Part 7: Magnesium Technology 2017: Solidification and Processing III and Magnesium-Rare Earth Alloys I -- Scaled-Up Fabrication of Thin-Walled ZK60 Tubing using Shear Assisted Processing and Extrusion (ShAPE) -- Biocompatible Magnesium Alloy ZNdK100 - Adaptation of Extrusion Parameters to Tailor the Mechanical Properties to Different Implant Applications -- Characterization of Semi-closed Die-Forged ZK60 Mg Alloy Extrusion -- Optimization of Nitrogen bubbling conditions for extruded Mg alloy with balanced mechanical properties -- Effects of Gadolinium and Neodymium Addition on Young's Modulus of Magnesium-based Binary Alloys -- Aging behavior of Mg alloys containing Nd and Y -- Variation of Rare Earth Elements in the Magnesium Alloy ME21 for the Sheet Production -- Phase stability and formation in Mg-Gd-Zn alloys - key data for ICME of Mg alloys -- Part 8: Magnesium Technology 2017: Corrosion -- An Electrochemical Investigation of Mg-Ni Hydrogen Storage Alloys by Mechanical Alloying -- Corrosion and creep resistance of thixomolded® magnesium alloys -- Corrosion Properties of Mg-6Al-0.3Mn-aSn-bZn Alloys -- Corrosion of magnesium-aluminum (Mg-Al) alloys - An interplay between Al content and CO2 -- Excimer Laser Processing of Al containing Mg Alloys for Improved Corrosion Resistance -- Effect of Al and Sn on discharge behavior of Mg alloy as anode for Mg-Air battery -- Utilization of a Partially Non-aqueous Electrolyte for the Spatial Mapping of Mg Corrosion using a model Mg-Al Electrode -- Voltammetric Studies of Extruded Pure Magnesium in Different Electrolytes and Its Corrosion Morphology -- Part 9: Magnesium Technology 2017: Magnesium-Rare Earth Alloys II -- Microstructure and mechanical properties of Mg-Zn-Gd alloys after rolling or extrusion processes -- A comparative study on the microstructure, mechanicalproperties, and hot deformation of magnesium alloys containing zinc, calcium and yttrium -- Addition of Holmium & Erbium and Hot-rolling effects on the Microstructure and Mechanical Properties of Mg-Li based Alloys -- Bonding environments in a creep-resistant Mg-RE-Zn alloy -- Microstructural and Numerical Investigation on the Shear Response of a Rare-Earth Magnesium Alloy Sheet -- Solute effect on strength and formability of Mg: A first-principle study -- Understanding on the role of rare earth elements in activation of slip in magnesium: An atomistic approach -- Stabilisation of disordered BCC phases in magnesium-rare earth alloys -- The Effects of Ca Addition on Microstructures and Mechanical Properties of Gravity Cast Mg-Zn-Y Alloy -- Part 10: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue III -- Microstructure and Texture Evolution during Hot Deformation of Cast-Homogenized ZK60 Magnesium Alloy -- Development of Texture during Tensile Test at Room Temperature -- Effect of Ca on the microstructure, texture and mechanical properties in Mg-Zn-Mn based alloy -- Evaluation of in vitro fatigue properties of biodegradable Mg-0.3at.…”
Full-text access
OPAC'ta görüntüle

Characterization of Minerals, Metals, and Materials 2017

İçindekiler: “…Part 1: Soft Materials -- Charpy Toughness Behavior of Fique Fabric Reinforced Polyester Matrix Composites -- Comparative Analysis of Curaua Fiber Density Using the Geometric Characterization and Pycnometry Technique -- Izod impact tests in polyester matrix composites reinforced with blanket of the malva and jute fibers -- Tensile Behavior of Epoxy Matrix Composites Reinforced With Eucalyptus Fibers -- The dimensional characterization of jute fabric strips for reinforcement in composite polymeric -- Izod Toughness Behavior of Continuous PALF Fibers Reinforced Polyester Matrix Composites -- Mechanical, thermal, morphology and barrier properties of flexible film based on polyethylene-ethylene vinyl alcohol blend reinforced with graphene oxide -- Radiation Effects on Crosslinking of Butyl Rubber Compounds -- Part 2: Clays and Ceramics -- Effect of Skin-Core Hierarchical Structure on Dielectric Constant of Injection Molded and Cast Film Extruded Liquid Crystalline Polymer -- Aging behaviour in Ni0.5CoxMn2.5-xO4 (x=0.5, 0.8 and 1.1) thermistors -- Adsorption of lead from aqueous solutions to bentonite and composite -- Part 3: Electronic, Magnetic, Environmental, and Advanced Materials -- Characterization Of Low-Zinc Electric Arc Furnace Dust -- GAMMA-RADIATION EFFECT ON BIODEGRADABILITY OF SYNTHETIC PLA STRUCTURAL FOAMS PP/HMSPP BASED -- STUDY OF FLEXIBLE FILMS PREPARED FROM PLA/PBAT BLEND AND PLA e-BEAM IRRADIATED AS COMPATIBILIZING AGENT -- Synthesis of ZnO Micro Prisms on Glass Substrates by the Spray Pyrolysis Method -- Part 4: Nano Materials -- Electrical and microstructural investigation of Ni0.5Co0.5Cu0.3Zn0.3Mn1.4O4 temperature sensors -- Enhanced physical properties of thin film nanocomposites -- A study on the size and type of inclusions in Si-Mn combined deoxidated low carbon steel strip -- Effect of Argon Gas Purging of Spark Plasma Sintered ZrB2+SiC Nano-powder Composites -- Part 5: Alloys -- Investigating the Anisotropic Behaviour of Lean Duplex Stainless Steel 2101 -- MICROSTRUCTUAL INVESTIGATION AND IMPACT TESTING OF ADDITIVE MANUFACTURED TI-6AL-4V -- Part 6: Powders and Foams -- SYNTHESIS OF TiN NANO-COMPOSITE POWDER BY HIGH-ENERGY BALL MILLING OF TiH2 UNDER NITROGEN ATMOSPHERE -- Application of AFM in Morphology Determination of Powder Material -- Effects of Thermal Processing on Closed-Cell Aluminium Foams -- Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams under Drop Weight Impact -- Deformation Mechanisms of Closed Cell-Aluminium Foams during Drop Weight Impact -- Part 7: Minerals -- INDUSTRIAL USE OF BRAZILIAN BENTONITE MODIFIED BY MILD ACID ATTACK -- Mullitization Characteristics and Sinterability of Kyanite in Ceramic Preparation -- Ore Dressing and Technological characterization of Palygorskite from Piauí/Brazil for applications as adsorbent of heavy metals -- TECHNOLOGICAL CHARACTERIZATION OF WASTE FROM GOLD MINING DAM -- Synthesis and Characterization of Sodalite and Cancrinita from Kaolin -- Part 8: Ferrous Metals -- Effects of Alumina and Magnesia on Microstructure and Mineralogy of Iron Ore Sinter -- Isothermal Reduction Kinetics of CaO·2Fe2O3 by Thermogravimetric Analysis -- Phase Transformation of MnO2 and Fe2O3 Briquettes Roasted Under CO-CO2 Atmospheres -- Contact Angle of Iron Ore Particles with Water: Measurements and Influencing Factors -- Important Factors to Consider in FIB Milling of Crystalline Materials -- Part 9: Material Processing and Corrosion -- Corrosion Behavior of Super-Ferritic Stainless Steels in NaCl media -- Effect of bromide ions on the pitting corrosion of hafnium in anhydrous t-butanol and acetonitrile -- Compression Behavior of Semi-Closed Die Forged AZ80 Extrusion -- Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique -- Part 10: Method Development -- Development of A New Recycling Process of PGM from Metal-supported Catalyst Using Complex Oxide -- Part 11: Composites -- High thermal conducting composites using percolation theory -- SORPTION CHARACTERISTICS OF LOW DENSITY POLYETHYLENE/KOLA NUT COMPOSITE -- Residual Stress Analysis within Steel Encapsulated Metal Matrix Composites Via Neutron Diffraction -- Tensile Behavior of Epoxy Matrix Composites Reinforced With Pure Ramie Fabric -- Hemp Fiber Density Using the Pycnometer Technique -- Preparation and Characterization of Clay Exfoliation and Vegetal fibre on Properties of Recycled Low Density Polyethylene (rLDPE) -- Part 12: Ferrous Metals -- Estimation of Dislocation Density in Metals from Microhardness Test -- Part 13: Welding and Solidification -- Interfacial strength characterization in a high-modulus low-density steel-based Fe-TiB2 composite -- Part 14: Materials Extractions -- Leaching of Copper-Cobalt Tailings from the Democratic Republic of Congo -- OPTIMUM OPERATING CONDITIONS FOR EXTRACTION OF LIGNIN PRECURSORS FROM PALM FRUIT BUNCH -- SELECTION ON THE PROCESS FOR ENRICHING GOLD FROM REFRACTORY GOLD ORES BY SMELTING -- SELECTION ON THE PROCESS FOR REMOVING AND RECOVERING ANTIMONY FROM ANTIMONIAL REFRACTORY GOLD ORES -- Upgrading of Copper and Cobalt from the Democratic Republic of Congo Tailings -- CHARACTERIZATION OF SPENT PRINTED CIRCUIT BOARDS FROM COMPUTERS -- Study of the Effect of the Initial Nucleation Mechanism of Lead Anode Oxidation Film on Internal Stress in Chromic Acid Electrolyte -- Part 15: Poster Session -- Addition of Cellulose Nanofibers in Reactive Powder Concrete -- ADVANCED ION COLUMN SOLUTION FOR LOW ION DAMAGE CHARACTERIZATION AND ULTRA-FINE PROCESS -- Application of Membrane Separation Technology in Wastewater Treatment of Iron and Steel Enterprise -- Brillouin Scattering Study on Elastic Properties of Bulk hcp ZnO Single Crystal -- Characteristics of stamp charging coke and top charging coke -- Characterization and leaching proposal of Ag ( I) from a Zn concentrate -- Characterization and Mechanical Properties of Additively Manufactured Stainless Steel 316L -- CHARACTERIZATION OF MERCURY JAROSITE -- Characterization of steel production dust and their use in structural ceramics -- CHARPY TOUGHNESS BEHAVIOR OF JUTE FABRIC REINFORCED POLYESTER MATRIX COMPOSITES -- Chemical and Mineralogical Characterization of a Mixed Sulphide Ore at Zimapan, Hidalgo -- Contribution to the ß relaxation study of the HDPE, LDPE and LLDPE -- Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES -- Effects of wet grinding on the structure and granularity of biological origin aragonite and its polymorphic transformation into calcite -- EVALUATION OF BALLISTIC ARMOR BEHAVIOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS -- EVALUATION OF THE POZZOLANIC ACTIVITY OF RESIDUE FROM THE PAPER INDUSTRY -- EVALUATION OF THE PROPERTIES OF THE ADHESIVE MORTAR IN THE FRESH STATE WITH ADDITION OF GLASS WASTE -- Experimental Evaluation of the Influence of Mortar's Mechanical Properties on The Behavior of Clay Masonry -- Influence of Operation Conditions on Normal Stress and Flow Pattern of Burden Materials in Blast Furnace Based on Discrete Element Method -- Polymer Blend based on recycled polyethylene and ethylene vinyl acetate copolymers reinforced with natural fibers from agricultural wastes -- Preliminary study of the effect of stirring rate, temperature and oxygen pressure on the leach rate of copper powder, generated by grinding of printed circuit boards of computer -- Preparation and Characterization of Polyethylene Nanocomposites with Clay and Silver Nanoparticles -- Production of concrete interlocking blocks with partial replacement of sand in bulk by waste glass machined -- Reactive Powder Concrete Production with the Addition of Granite Processing Waste -- Research on the reason of the different type of chloride forming in the process of blast furnace ironmaking -- Stress and Deformation Analysis of Hot Blast Stove Piping System -- Stress and Deformation Analysis of Top Combustion Hot Blast Stove Shell -- STUDY OF CALCINED MIXTURES FROM INDUSTRIAL RESIDUES FOR PRODUCTION OF AGGLOMERATES.…”
Full-text access
OPAC'ta görüntüle