Arama Sonuçları - Inner Six~

Essays on teaching education and the inner drama of teaching : where troubles meet issues / Yazar: Bullough Jr, Robert V.

Full-text access
OPAC'ta görüntüle

Female Genital Cosmetic Surgery Deviance, Desire and the Pursuit of Perfection / Yazar: Nurka, Camille

Full-text access
OPAC'ta görüntüle

Neighbourhoods for the city in Pacific Asia / Yazar: Ho, Kong-Chong, 1955-

İçindekiler: “…The Political Economy of Cities in Pacific Asia --…”
Full-text access
OPAC'ta görüntüle

Kendini aş! eleştirel iç sesinizi yenmek ve sevdiğiniz bir hayat yaratmak için 7 strateji / Yazar: Lombardo, Elizabeth

OPAC'ta görüntüle

Numerical Modelling and Experimental Testing of Heat Exchangers Yazar: Taler, Dawid

İçindekiler: “…Introduction -- Mass, momentum and energy conservation equations -- Laminar flow of fluids in ducts -- Turbulent fluid flow -- Analogies between the heat and the momentum transfer -- Developed turbulent fluid flow in ducts with a circular cross-section -- Basics of the heat exchanger modelling -- Engineering methods for thermal calculations of heat exchangers -- Mathematical models of heat exchangers -- Mathematical modelling of tube cross-flow heat exchangers operating in steady-state conditions -- Assessment of the indirect measurement uncertainty -- Experimental testing of heat exchangers -- Determination of the local and the mean heat transfer coefficient on the inner surface of a single tube and finding experimental correlations -- Determination of mean heat transfer coefficients using the Wilson method -- Determination of correlations for the heat transfer coefficient on the air side assuming a known heat transfer coefficient on the tube inner surface -- Parallel determination of correlations for heat transfer coefficients on the air and water sides -- Determination of correlations for the heat transfer coefficient on the air side by means of CFD simulations -- Automatic control of the liquid temperature at the car radiator outlet -- Final comments.…”
Full-text access
OPAC'ta görüntüle

Regulation Fixtures in Hydronic Heating Installations Types, Structures, Characteristics and Applications / Yazar: Muniak, Damian Piotr

İçindekiler: “…Aim of the process of a hydronic heating installation control and regulation -- Role, types and structure of the heating installation regulation valves -- Pressure losses in the heating installation pipework and hydraulic resistance -- Regulation valve co-operation with the pipework -- Experimental verification of the proposed methods of determination of the valve inner authority, pre-setting and the closing plug geometry -- Computational examples.…”
Full-text access
OPAC'ta görüntüle

Ship Construction and Welding Yazar: Mandal, Nisith R.

Full-text access
OPAC'ta görüntüle

Crime and punishment perspectives from the humanities /

Full-text access
OPAC'ta görüntüle

Mathematical Physical Chemistry Practical and Intuitive Methodology / Yazar: Hotta, Shu

İçindekiler: “…Schrödinger Equation and Its Application -- 2. Quantum-Mechanical Harmonic Oscillator -- 3. …”
Full-text access
OPAC'ta görüntüle

Introduction to Refractories for Iron- and Steelmaking. Yazar: Biswas, Subir

İçindekiler: “…3.4.1.5 Thermal Expansion of the Lining and Shell -- 3.4.2 Quality Upgradation -- 3.4.2.1 Upgradation of Carbon Refractory in Hearth Lining -- 3.4.2.2 Micropore and Super Micropore Carbon -- 3.4.3 Monitoring of Refractory Condition -- 3.4.3.1 Use of Duel Thermocouple -- 3.4.3.2 Acoustoultrasonicecho Technique -- 3.4.3.3 Anomalies in Defining Refractory Lining Thickness -- 3.4.3.4 Design of Ceramic cup -- 3.4.3.5 Advantages of Using Ceramic Cup -- Cracking Mechanism -- 3.4.4 Thermal Solution -- 3.4.4.1 Formation of ``Freezing Layer -- 3.4.5 Bottom Pad Cooling Layer -- 3.4.6 Blast Furnace Repair Processes -- 3.4.6.1 Relining Process -- 3.4.6.2 Expansion of Blast Furnace Inner Volume -- 3.4.6.3 Relining Activity -- 3.4.6.4 Dismantling of Old Refractory -- 3.4.6.5 Lining of New Refractory -- 3.4.6.6 Brick Lining in Stack -- 3.4.7 Change of Stack Refractory -- 3.4.7.1 Gas-Free Atmosphere -- 3.4.7.2 Refractory Concrete for Capping -- 3.5 Cast House Refractory -- 3.5.1 Tap Hole Design -- 3.5.2 Tap Hole Clay and its Performances -- 3.5.2.1 Wear Mechanism of Tap Hole Clay -- 3.5.2.2 Moisture and Volatile Matter -- 3.5.2.3 Checking the Properties of Tap Hole Clay to Ensure Performance -- 3.5.3 Hot Metal Trough and its Design -- 3.5.3.1 Pooling Trough -- 3.5.3.2 Semi-Pooling Trough -- 3.5.3.3 Non-pooling Trough -- 3.5.4 Refractory for Hot Metal Trough and Iron Runners -- 3.5.5 Wear Mechanism -- 3.5.6 Modern Refractory Practices -- 3.5.6.1 Use of Antioxidants -- 3.5.6.2 Effect of Spinel Content on Refractory Castables -- 3.5.6.3 Effect of Silicon Carbide -- 3.5.6.4 Use of SiO2-Sol as a Binder -- 3.5.6.5 High Performance Backup Lining -- References -- Chapter 4: Hot Stove and Hot Air Carrying System -- 4.1 Introduction -- 4.2 Design of Hot Blast Stove -- 4.3 Refractory Lining Design -- 4.3.1 High Alumina Refractory in Hot Blast Stove.…”
Full-text access
OPAC'ta görüntüle

Creative Hubs in Question Place, Space and Work in the Creative Economy /

İçindekiler: “…; Marisol Sandoval and Jo Littler -- PART 2: LOOKING OUTSIDE THE CLUSTER -- Chapter 9: Istanbul's Sounds and its 'Creative' Hubs: Creative Actors Articulating the City into Transnational Networks through Music; Ceren Mert -- Chapter 10: Nairobi's iHub: Technology for Society; Øyvind Økland -- Chapter 11: Producing Values: Impact Hub Birmingham as Co-Working and Social Innovation Space; Paul Long and Annette Naudin -- Chapter 12: Punk Rock Entrepreneurship: All-Ages DIY Music Venues and the Urban Economic Landscape; Michael Seman -- Chapter 13: Thinking through the Creative Hub in Peripheral Places: A Long-View of the Dartington Hall Experiment in Rural Reconstruction through Creativity; Nicola J. …”
Full-text access
OPAC'ta görüntüle

8th International Symposium on High-Temperature Metallurgical Processing

İçindekiler: “…Part 1: Energy Efficient Clean Metallurgical Technology -- Flash Ironmaking from Magnetite Concentrate in a Laboratory Reactor: Experimental and CFD Work -- Synthesis of Chromite for Subsequent Carburization by Methane-hydrogen Gas Mixture -- Effects of Hydrogen-enriched Reduction on Metallurgical Properties of Iron-Bearing Burdens under BF Operation with Cog Injection -- Microwave-intensified Reduction of Biochar-containing Briquettes -- Refractory Challenges in Lead Recycling Furnaces -- Synthesis of Carbide Ceramics via Reduction of Adsorbed Anions on an Activated Carbon Matrix -- Part 2: Simulation of High Temperature Process -- A CFD Based Algorithm for Kinetics Analysis of the Reduction of Hematite Concentrate by H2+CO Mixtures in a Drop Tube Reactor -- A Continuous Dynamic Process Model to Design a Carbon Profile toward Yield Improvement -- Alloy Yield Prediction Model Based on the Data Analysis in EAF Steelmaking Process -- Analysis of Jet Behavior and Surface Fluctuations in the Meniscusof Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling -- CFD Study of Gas-liquid Phase Interaction Inside a Submerged Lance Smelting Furnace for Copper Smelting -- Debottlenecking High Temperature Metallurgical Plants through Modeling and Simulation -- Assessment of Slag Entrainment in a RH Degasser through Physical Modelling Using Circulating Fluids of Different Densities/Oil Systems for Simulating Steel Melt/Slag -- Part 3: Fundamental Research of Metallurgical Process -- Investigate on the Phase Composition of Vanadium Slag with High CaO Content and Influence of P2O5 on Crystallization Kinetics of Spinels -- Thermal Analysis Kinetics of the Solid-State Reduction of Nickel Laterite Ores by Carbon -- Thermodynamic and Experimental Investigations of High Temperature Refractory Corrosion by Molten Slags -- Thermodynamic Calculation on the Reactivity between Slag and Ti-stabilized Stainless Steel -- Part 4: Alloys and Materials Preparation -- Development of a Novel, Low-cost Titanium Extraction Process for Bulk or Powder Applications -- Evolution of Non-metallic Inclusions in Solid Fe-Al-Ti-N Alloy during Heating -- Preparation of Low-carbon Ti2O3 by Carbon thermal Reduction of the Mixture of Titanium Dioxide and Activated Carbon under Vacuum Condition -- Pyrometallurgical Studies for Manganese Extraction Using Turkish Ore Reserves -- Trace Elements Behavior during the Oxidation of Liquid SiMn Alloy -- Effect of Microalloy Elements V And Mg on Organization at High Heat Input Welding Shipbuilding Structure Steel -- Part 5: Extraction and Recovery of Metals -- Effect of Carbon Reductant On The Formation of Copper Doped Titanium Oxycarbonitride by Carbothermal Reduction and Nitridation -- Cohering Behavior of Scrap Powder in Kiln by a Novel Natural Stacking Method -- Direct-to-blister Copper Smelting with the ISASMELT™ Process -- Improving Separation of Cu-Fe from Copper Slag by Mineral Phase Reconstruction -- Phase Transformation of High Calcium Type Tin, Iron-bearing Tailings during Magnetizing Roasting Process -- Sensitivity of Contactless Ultrasound Processing to Variations of the Free Surface of the Melt with Induction Heating -- Extraction of Zinc from Willemite by Sodium Salt Roasting and Ammonia-leaching Process -- Part 6: Ironmaking and Steelmaking -- Influence of Puhrstahl Heraeus Refining Process on Aluminum Consumption in Interstitial-Free Steel Smelting Process -- Formation Mechanisms of Inclusions in Spring Steels -- Investigation on Coal Combustion Behaviors under the Oxygen Blast Furnace -- Inclusion Control with Ca Treatment to Improve Castability of a Low Carbon Al Killed Steel -- High Temperature Mineralization Mechanism of Granules during Iron Ore Sintering Process -- Reduction Behaviors of Sinter Made from Magnetite Concentrates in Reducing Process Simulated COREX Shaft Furnace -- Part 7: Treatment and Recycling of Slag/Wastes -- Introduction of Matte Droplets in Copper Smelting Slag -- Dissolution Behavior of Fe from Glassy Oxide Phase in Steelmaking Slag -- Penetration Depth of Microwave in Tire Rubber -- Effect of TiO2 on Thermophysical Properties and Structure of P-bearing Steelmaking Slags -- Analysis for Optimum Conditions for Recovery of Valuable Metals from E-Waste through Black Copper Smelting -- Precipitation Behavior of MxTi3-xO5 in the Titanium-Bearing Electric Furnace Slag -- Part 8: Utilization of Complex Ores -- Evaluation of Molybdenum Concentrates -- Intensification of Gold Leaching from a Multi-refractory Gold Concentrate by the Two-stage Roasting-alkaline Sulfide Washing-cyanidation Process -- The Recovery of Cobalt from Copper Converter Slag by Reduction-sulfurization Smelting at High Temperature -- Roasting of Celestite in Laboratory Scale Rotary Furnace -- The Experimental Study of CaCO3 in the Vanadium Extraction Process -- The Extraction of Zinc from Zinc Ferrite by Calcified Roasting and Ammonia Leaching Process -- Part 8: Poster I -- A New Method to Detect the High Temperature Distribution in the Ironmaking and Steelmaking Industry -- A Study for Reconstructing the Three-dimensional Temperature Field of a Blast Furnace Raceway Based on Monte Carlo Method -- Behaviour of Silicon in Nickel Laterite by Carbothermic Reduction in Vacuum -- Effect of CaO Addition on the Behavior of Vanadium and Phosphorus during Oxidation and Leaching Process -- Effect of Inner Shape on Blast Furnace Performance for Iron Making -- Effect of Lance Configurations on Coal Flow and Combustion Characteristics -- Effect of Silicon on Removal of Phosphorus from High Phosphorus Si-Mn alloy by CaO-Based Slag -- Effect of Super Gravity on the Solidification Structure and C Segregation of High Carbon Steel -- High Temperature Distribution Measurement of the Blast Furnace Raceway through Imaging Techniques and Optimization Algorithms -- Kinetics and Reduction Behavior of Self-reducing Briquettes Containing Blast Furnace Dust -- Model Analysis of the Phenomena of Pulverized Coal Injection in Blast Furnace -- Sintering Performance of Blends Containing High Proportion of Limonite Iron Ore Fines -- Thermodynamics Study on Phosphorus Distribution between 2CaO•SiO2-3CaO•P2O5 Solid Solution and Liquid Slag -- Two-step Copper Smelting Process at Dongying Fangyuan -- Part 9: Poster II -- Comparison of the Ringing Characteristics between Acid and Alkaline Iron Ore Pellets Powder in Kiln -- Comprehensive Utilization of Ludwigite Iron Concentrate by Gas-based Direct Reduction -- Decarburization of Spent Petrochemical Catalysts via Microwave Oxidation Roasting -- Effect of FeO Content in Laterite Nickel Slag on the Corrosioin Behaviour of Refractory Materials -- Effects of Blowing Conditions on the Dispersion States of Materials Charged into Bottom Blown Oxygen Smelting Furnace -- Effects of Pre-oxidation and Additives on Carbothermic Reduction of Ilmenite Concentrate -- Influence of Converter Slag on Decomposition Behavior of Limestone during BOF Steelmaking Process -- Influence of Hot Charge on Blast Furnace Performance for Iron Making -- Investigation and Application of Evolution System of Stock Surface Gas Flow Distribution in Blast Furnace -- Investigation of the Carbothermic Reduction of Chromium-containing Vanadium Extraction Residue -- Molecular Dynamics Study of the Structural Properties with Varying -- One-step Extraction of Lead from Spent Lead-acid Battery Paste via Reductive Sulfur-fixing Smelting: Thermodynamic Analysis -- Removal of Cd(II) Ion from Aqueous Solution by Adsorption on Wasted Low Grade Phosphorus-containing Iron Ore -- Research on the Flow Behavior of Molten Slag through Pore -- Study on the Influence of Materials on Heat Transfer Characteristics of Blast Furnace Cooling Staves.…”
Full-text access
OPAC'ta görüntüle