Search Results - Inside Soap~

The Sound inside the Silence Travels in the Sonic Imagination / by Street, Seán

Full-text access
View in OPAC

Road Tunnels An Analytical Model for Risk Analysis / by Borghetti, Fabio, Cerean, Paolo, Derudi, Marco, Frassoldati, Alessio

Table of Contents: “…Road tunnels risk analysis -- Background of modelling approaches and tools -- Model structure -- Tunnel infrastructure measures, equipment and management procedures -- Queue formation model -- Distribution model of potentially exposed users inside the tunnel -- Consequence analysis of the accidental scenarios -- Egress model for tunnel users -- Calculation of the F-N curve and the expected damage value -- Model calibration and validation.…”
Full-text access
View in OPAC

Persuasion in Self-improvement Books by Koay, Jeremy

Full-text access
View in OPAC

SDG3 good health and wellbeing : re-calibrating the SDG Agenda : concise guides to the United Nations Sustainable Development Goals /

Full-text access
View in OPAC

Fault-Tolerant Digital Microfluidic Biochips Compilation and Synthesis / by Pop, Paul, Alistar, Mirela, Stuart, Elena, Madsen, Jan

Full-text access
View in OPAC

Integration of Nature and Technology for Smart Cities by Ahuja, Anil

Full-text access
View in OPAC

Advances in Fluid and Thermal Engineering Select Proceedings of FLAME 2018 /

Table of Contents: “…-Design and Numerical Analysis to Visualize the Fluid Flow Pattern Inside Cryogenic Radial Turbine -- Performance Evaluation of Thermoelectric Refrigerator Based on Natural and Forced Mode of Cooling Processes -- Optimization of Electrical Power of Solar Cell of Photovoltaic Module for a Given Peak Power and Photovoltaic Module Area -- Steady state modelling and validation of a thermal power plant -- To Reduce Pollution Due to Burning Of Coal in Thermal Power Plant -- An Analysis of a Duct with Different Vortex Generators for Performance Enhancement of a Solar Air Heater: Computational Fluid Dynamics (CFD) -- Experimental Analysis of Thermal Conductive Properties on Aerogel filled Composite Structure.…”
Full-text access
View in OPAC

Intelligent Systems Design and Applications 17th International Conference on Intelligent Systems Design and Applications (ISDA 2017) held in Delhi, India, December 14-16, 2017 /

Table of Contents: “…Enhancing Job Opportunities in Rural India Through Constrained Cognitive Learning Process: Reforming Basic Education -- UML2ADA for Early Verification of Concurrency Inside the UML2.0 Atomic Components -- A New Approach for the Diagnosis of Parkinson's Disease Using a Similarity Feature Extractor -- A Novel Restart Strategy for Solving Complex Multi-Modal Optimization Problems using Real-Coded Genetic Algorithm -- Evaluating SPL Quality with Metrics -- Using Sentence Similarity Measure for Plagiarism Detection of Arabic Documents -- Computer Aided Recognition and Classification of Coats of Arms -- Mining Gene Expression Data: Patterns Extraction for Gene Regulatory Networks.…”
Full-text access
View in OPAC

Interfacial Phenomena on Biological Membranes by Arakha, Manoranjan, Jha, Suman

Full-text access
View in OPAC

New Developments in Tissue Engineering and Regeneration

Table of Contents: “…Fernandes, Uwe Gbureck -- A biomechanical approach for bone regeneration inside scaffolds embedded with BMP-2, by Carolina Gorriz, Frederico Ribeiro, José Miranda Guedes, João Folgado, Paulo R. …”
Full-text access
View in OPAC

Food Hygiene and Applied Food Microbiology in an Anthropological Cross Cultural Perspective by Zaccheo, Aleardo, Palmaccio, Eleonora, Venable, Morgan, Locarnini-Sciaroni, Isabella, Parisi, Salvatore

Full-text access
View in OPAC

Bridging the gap between theory, research, and practice the role of child development laboratory programs in early childhood education /

Table of Contents: “…Fu -- Reconceptualizing the child development laboratory school / Carol Bersani, Pamela Hutchins -- Bridging the gap through community collaboration: an evolving role for child development laboratory programs / Diane M. …”
Full-text access
View in OPAC

Access to care and factors that impact access, patients as partners in care and changing roles of health providers

Table of Contents: “…Utz, Richard Nelson, Peter Dien -- Medicare knowledge and health service utilization among older adults / Noah J. Webster.…”
Full-text access
View in OPAC

Electrical Atomic Force Microscopy for Nanoelectronics

Full-text access
View in OPAC

Integrating gender in agricultural development : learnings from South Pacific contexts /

Full-text access
View in OPAC

Applied Mechanics, Behavior of Materials, and Engineering Systems Selected contributions to the 5th Algerian Congress of Mechanics, CAM2015, El-Oued, Algeria, October 25 - 29 /

Table of Contents: “…-Determination of Elastic-Plastic Parameters of Inconel Arc Sprayed Coating.-Study of Noise Inside a Mechanical Shovel Cabin Using a Sound Perception Approach -- Perceptual Study of Simple and Combined Gear Defects -- Natural Frequencies of Composite Cylindrical Helical Springs -- Improvement of the Sensitivity of the Scalar Indicators Using a Denoising Method by Wavelet Transform -- Fault Diagnosis Through the Application of Cyclostationarity to Signals Measured -- Experimental Study of Real Gear Transmission Defects Using Sound Perception -- Taguchi Design of Experiments for Optimization and Modeling of Surface Roughness when Dry Turning X210Cr12 Steel -- Study Contribution of Surface Quality Parts Machined by Turning Using Hard Materials -- Prediction of Cutting Tool's Optimal Lifespan Based on the Scalar Indicators and the Wavelet Multi-Resolution Analysis -- Diffusion Modelling of Composite With Permeable Fiber.…”
Full-text access
View in OPAC

Frontiers in Materials Processing, Applications, Research and Technology Select Proceedings of FiMPART 2015 /

Table of Contents: “…Elements Diffusion in Brazing Seam of High Volume Fraction Sicp/6063Al Matrix Composites -- 10. …”
Full-text access
View in OPAC

8th International Symposium on High-Temperature Metallurgical Processing

Table of Contents: “…Part 1: Energy Efficient Clean Metallurgical Technology -- Flash Ironmaking from Magnetite Concentrate in a Laboratory Reactor: Experimental and CFD Work -- Synthesis of Chromite for Subsequent Carburization by Methane-hydrogen Gas Mixture -- Effects of Hydrogen-enriched Reduction on Metallurgical Properties of Iron-Bearing Burdens under BF Operation with Cog Injection -- Microwave-intensified Reduction of Biochar-containing Briquettes -- Refractory Challenges in Lead Recycling Furnaces -- Synthesis of Carbide Ceramics via Reduction of Adsorbed Anions on an Activated Carbon Matrix -- Part 2: Simulation of High Temperature Process -- A CFD Based Algorithm for Kinetics Analysis of the Reduction of Hematite Concentrate by H2+CO Mixtures in a Drop Tube Reactor -- A Continuous Dynamic Process Model to Design a Carbon Profile toward Yield Improvement -- Alloy Yield Prediction Model Based on the Data Analysis in EAF Steelmaking Process -- Analysis of Jet Behavior and Surface Fluctuations in the Meniscusof Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling -- CFD Study of Gas-liquid Phase Interaction Inside a Submerged Lance Smelting Furnace for Copper Smelting -- Debottlenecking High Temperature Metallurgical Plants through Modeling and Simulation -- Assessment of Slag Entrainment in a RH Degasser through Physical Modelling Using Circulating Fluids of Different Densities/Oil Systems for Simulating Steel Melt/Slag -- Part 3: Fundamental Research of Metallurgical Process -- Investigate on the Phase Composition of Vanadium Slag with High CaO Content and Influence of P2O5 on Crystallization Kinetics of Spinels -- Thermal Analysis Kinetics of the Solid-State Reduction of Nickel Laterite Ores by Carbon -- Thermodynamic and Experimental Investigations of High Temperature Refractory Corrosion by Molten Slags -- Thermodynamic Calculation on the Reactivity between Slag and Ti-stabilized Stainless Steel -- Part 4: Alloys and Materials Preparation -- Development of a Novel, Low-cost Titanium Extraction Process for Bulk or Powder Applications -- Evolution of Non-metallic Inclusions in Solid Fe-Al-Ti-N Alloy during Heating -- Preparation of Low-carbon Ti2O3 by Carbon thermal Reduction of the Mixture of Titanium Dioxide and Activated Carbon under Vacuum Condition -- Pyrometallurgical Studies for Manganese Extraction Using Turkish Ore Reserves -- Trace Elements Behavior during the Oxidation of Liquid SiMn Alloy -- Effect of Microalloy Elements V And Mg on Organization at High Heat Input Welding Shipbuilding Structure Steel -- Part 5: Extraction and Recovery of Metals -- Effect of Carbon Reductant On The Formation of Copper Doped Titanium Oxycarbonitride by Carbothermal Reduction and Nitridation -- Cohering Behavior of Scrap Powder in Kiln by a Novel Natural Stacking Method -- Direct-to-blister Copper Smelting with the ISASMELT™ Process -- Improving Separation of Cu-Fe from Copper Slag by Mineral Phase Reconstruction -- Phase Transformation of High Calcium Type Tin, Iron-bearing Tailings during Magnetizing Roasting Process -- Sensitivity of Contactless Ultrasound Processing to Variations of the Free Surface of the Melt with Induction Heating -- Extraction of Zinc from Willemite by Sodium Salt Roasting and Ammonia-leaching Process -- Part 6: Ironmaking and Steelmaking -- Influence of Puhrstahl Heraeus Refining Process on Aluminum Consumption in Interstitial-Free Steel Smelting Process -- Formation Mechanisms of Inclusions in Spring Steels -- Investigation on Coal Combustion Behaviors under the Oxygen Blast Furnace -- Inclusion Control with Ca Treatment to Improve Castability of a Low Carbon Al Killed Steel -- High Temperature Mineralization Mechanism of Granules during Iron Ore Sintering Process -- Reduction Behaviors of Sinter Made from Magnetite Concentrates in Reducing Process Simulated COREX Shaft Furnace -- Part 7: Treatment and Recycling of Slag/Wastes -- Introduction of Matte Droplets in Copper Smelting Slag -- Dissolution Behavior of Fe from Glassy Oxide Phase in Steelmaking Slag -- Penetration Depth of Microwave in Tire Rubber -- Effect of TiO2 on Thermophysical Properties and Structure of P-bearing Steelmaking Slags -- Analysis for Optimum Conditions for Recovery of Valuable Metals from E-Waste through Black Copper Smelting -- Precipitation Behavior of MxTi3-xO5 in the Titanium-Bearing Electric Furnace Slag -- Part 8: Utilization of Complex Ores -- Evaluation of Molybdenum Concentrates -- Intensification of Gold Leaching from a Multi-refractory Gold Concentrate by the Two-stage Roasting-alkaline Sulfide Washing-cyanidation Process -- The Recovery of Cobalt from Copper Converter Slag by Reduction-sulfurization Smelting at High Temperature -- Roasting of Celestite in Laboratory Scale Rotary Furnace -- The Experimental Study of CaCO3 in the Vanadium Extraction Process -- The Extraction of Zinc from Zinc Ferrite by Calcified Roasting and Ammonia Leaching Process -- Part 8: Poster I -- A New Method to Detect the High Temperature Distribution in the Ironmaking and Steelmaking Industry -- A Study for Reconstructing the Three-dimensional Temperature Field of a Blast Furnace Raceway Based on Monte Carlo Method -- Behaviour of Silicon in Nickel Laterite by Carbothermic Reduction in Vacuum -- Effect of CaO Addition on the Behavior of Vanadium and Phosphorus during Oxidation and Leaching Process -- Effect of Inner Shape on Blast Furnace Performance for Iron Making -- Effect of Lance Configurations on Coal Flow and Combustion Characteristics -- Effect of Silicon on Removal of Phosphorus from High Phosphorus Si-Mn alloy by CaO-Based Slag -- Effect of Super Gravity on the Solidification Structure and C Segregation of High Carbon Steel -- High Temperature Distribution Measurement of the Blast Furnace Raceway through Imaging Techniques and Optimization Algorithms -- Kinetics and Reduction Behavior of Self-reducing Briquettes Containing Blast Furnace Dust -- Model Analysis of the Phenomena of Pulverized Coal Injection in Blast Furnace -- Sintering Performance of Blends Containing High Proportion of Limonite Iron Ore Fines -- Thermodynamics Study on Phosphorus Distribution between 2CaO•SiO2-3CaO•P2O5 Solid Solution and Liquid Slag -- Two-step Copper Smelting Process at Dongying Fangyuan -- Part 9: Poster II -- Comparison of the Ringing Characteristics between Acid and Alkaline Iron Ore Pellets Powder in Kiln -- Comprehensive Utilization of Ludwigite Iron Concentrate by Gas-based Direct Reduction -- Decarburization of Spent Petrochemical Catalysts via Microwave Oxidation Roasting -- Effect of FeO Content in Laterite Nickel Slag on the Corrosioin Behaviour of Refractory Materials -- Effects of Blowing Conditions on the Dispersion States of Materials Charged into Bottom Blown Oxygen Smelting Furnace -- Effects of Pre-oxidation and Additives on Carbothermic Reduction of Ilmenite Concentrate -- Influence of Converter Slag on Decomposition Behavior of Limestone during BOF Steelmaking Process -- Influence of Hot Charge on Blast Furnace Performance for Iron Making -- Investigation and Application of Evolution System of Stock Surface Gas Flow Distribution in Blast Furnace -- Investigation of the Carbothermic Reduction of Chromium-containing Vanadium Extraction Residue -- Molecular Dynamics Study of the Structural Properties with Varying -- One-step Extraction of Lead from Spent Lead-acid Battery Paste via Reductive Sulfur-fixing Smelting: Thermodynamic Analysis -- Removal of Cd(II) Ion from Aqueous Solution by Adsorption on Wasted Low Grade Phosphorus-containing Iron Ore -- Research on the Flow Behavior of Molten Slag through Pore -- Study on the Influence of Materials on Heat Transfer Characteristics of Blast Furnace Cooling Staves.…”
Full-text access
View in OPAC

Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018) Volume 2 /

Table of Contents: “…Modeling and Optimization of SIS Process Using Evolutionary Computational Approach -- Computational Characterization of a C-D Nozzle with Variable Geometry Translating Throat -- Synthesis and Characterization of Al2O3-Cr2O3 Based Ceramic Composites for Artificial Hip Joint -- Experimental Investigation On Tensile and Fracture Behaviour of Glass Fibre Reinforced Nanoclay/Mg-Al LDH Based Fiber Metal Laminates -- Experimental Study on Micro-Deburring Of Microgrooves by Micro-EDM -- Influences of Tool Pin Profiles on Mechanical Properties of Friction Stir Welding Process of Aa8011 Aluminium Alloy -- Numerical Investigation of the Behavior of Thin Walled Metal Tubes Under Axial Impact -- Improving Process Performance with World Class Manufacturing Technique: A Case in Tea Packaging Industry -- Tensile Testing and Evaluation of 3D Printed PLA Specimens as Per ASTM D638 Type-IV Standard -- Design Optimization and Testing Of Structure of a Single Door Refrigerator -- Use of Low Fidelity Codes for Teaching Aircraft Design -- Drag Reduction for Flow Past A Square Cylinder Using Rotating Control Cylinders - A Numerical Simulation -- Study the Effect of Mill Scale Filler on Mechanical Properties of Bidirectional Carbon Fibre Reinforced Polymer Composite -- Study On Carbon, Glass and Flax Hybrid Composites Using Experimental and Computational Techniques -- Design Evaluation of A Mono-Tube Magnetorheological (MR) Damper Valve -- Characterization of Soot Microstructure for Diesel and Biodiesel Using Diesel Particulate Filter -- Performance of Diesel Particulate Filter Using Metal Foam Combined With Ceramic Honeycomb Substrate -- Dry Machining of Nimonic 263 Alloy Using PVD and CVD Inserts -- Investigation of Parameters for Machining a Dif-Ficult-To-Machine Superalloy: Inconel X-750 and Waspaloy -- Aerodynamic Characteristics of Semi-Spiroid Winglets at Subsonic Speed -- Vibrational Analysis of Self-Aligning Rolling Contact Bearing Defects -- Fabrication and Characterization of Cu2-Xzn1.3sns4 Kesterite Thin Films Synthesized By Solvent Based Process Method for Photovoltaic Solar Energy Applications -- Formula SAE Power Increment -- Temperature Behavior-Based Monitoring Of Worm Gears Under Different Working Conditions -- Production and Comparison of Fuel Properties for Various Bio-Diesels -- Experimental Determination of Fluid Flow Parameters to Study Permeation Process Inside A Porous Channel -- Diesel Engine Cylinder Head Port Design for Armoured Fighting Vehicles: Compromise and Design Features -- Design Optimization of Advanced Multi-Rotor Unmanned Aircraft System Using FSI -- Studies on Carbon Materials Based Antenna for Space Applications -- Progress and Issues Related To Designing and 3D Printing Of Endodontic Guide -- Physical and Tribological Behaviour of Dual Particles Reinforced Metal Matrix Composites -- Parametric Optimization of Friction Welding Parameter of Ferritic Stainless Steel and Copper Material Using Taguchi Approach -- Experimental Investigation onthe Thermal Performance of the Light Emitting Diode (LED) Heat Sinks -- Numerical Modeling of Spiral Cyclone Flow Field and the Impact Analysis of a Vortex Finder -- Lattice Boltzmann Simulation of Double-Sided Deep Cavities at Low Reynolds Number -- A Study of Thermo-Structural Behavior of Annular Fin -- A New Design to Achieve Variable Compression Ratio in a Spark Ignition Engine -- Experimental Investigation on Energy Saving Due To Bubble Disturbance in Boiling Process -- Highway Traffic Scenario Based Lane Change Strategy for Autonomous Vehicle -- Friction and Wear Analysis of PTFE Composite Materials -- Flow Analysis of Catalytic Converter - LCV BS III Applications for Optimising Pressure Drop -- Step Towards Computer Aided Integration Of Sheet Metal Applications -- Thermodynamic Analysis of Diesel Engine Fueled With Aqueous Nanofluid Blends -- Investigation of Twin Cylinder Direct Injection CI Engine Characteristics Using Calophyllum Inophyllum Biodiesel Blends -- A Novel Beetle Inspired Fuel Injection System for Improved Combustion Efficiency -- Effect of Friction Stir Processing On the Dry Sliding Wear Behaviour of AA6082-5tib2 Composite -- Optimization of Sliding Wear Performance of Ti Metal Powder Reinforced Al 7075 Alloy Composite Using Taguchi Method -- A Comparative Study on Mechanical and Dry Sliding Wear Behaviour of Al 7075-T6 Welded Joints Fabricated By FSW, TIG and MIG -- Overview of Cryogens Production and Automation in Cryo-Distribution at TIFR, Mumbai -- Analysis of Recast Layer, Wear Rate and Taper Angle in Micro-Electrical Discharge Machining Over Ti-6Al-4V -- Evaluation of Critical Speed for Aluminum - Boron Carbide Metal Matrix Composite Shaft -- Smart System for Feature Recognition of Sheet Metal Parts: A Review. .…”
Full-text access
View in OPAC

Disciplinary Convergence in Systems Engineering Research

Table of Contents: “…Architecting Cyber-Secure, Resilient System-of-Systems -- Chapter13 -- Inference Enterprise Multi-Modeling for Insider Threat Detection Systems -- Chapter14. SoS Explorer: a tool for system-of-systems architecting -- Chapter15. …”
Full-text access
View in OPAC