Arama Sonuçları - The Air Seller~

IUTAM Symposium on Recent Advances in Moving Boundary Problems in Mechanics Proceedings of the IUTAM Symposium on Moving Boundary Problems, Christchurch, New Zealand, February 12-1...

İçindekiler: “…Manickavasagam, S. Gutschmidt, M. Sellier.…”
Full-text access
OPAC'ta görüntüle

SAE International's Dictionary for Automotive Engineers. Yazar: Kershaw, John F.

İçindekiler: “…Front Cover -- Title Page -- Copyright Page -- Contents -- Preface -- Acknowledgments -- List of Acronyms -- A -- 3-4-5 Accident Measuring Triangle -- 4-Stroke Cycle (Spark Ignition) -- 4-Stroke Cycle Diesel (Compression Ignition) -- 2WD (Two-Wheel Drive) -- 4WD (Four-Wheel Drive) -- 4WD/AWD Shift Motor -- ABS (Anti-lock Brake System) -- ABS Truck Hydraulic Control Unit -- ABS Truck Malfunction System -- Absolute or Dynamic Viscosity -- Absorption -- AC (Alternating Current) -- AC Coupling -- AC Induction Motor -- Accelerate -- Acceleration -- Acceleration Test -- Accelerator Pump -- Accelerometer -- Accident Reconstruction (Automotive and Motorcycle) -- Accumulator -- Ackermann Principle -- Ackermann Steering System -- Acrylic Paint -- Active Restraint System -- Active Sensor -- Actuator -- AD Converter -- AD (Analog-to-Digital) Converter Circuit -- Adaptive Controller (Radar Cruise Control) -- Adaptive Learning -- Adaptive Memory -- Adaptive Testing -- ADEMS (Advanced Diesel Engine Management System) -- Additive -- Address -- Adhesion -- Adhesive -- Adiabatic -- Adjustable Brake and Accelerator Pedals -- ADS (Automated Driving Systems) -- Aerobic Sealant -- Aerodynamic Drag -- Aerodynamics -- AFR (Air-to-Fuel Ratio) -- A-Frame Control Arm -- Afterburner -- Aftercooler (Turbocharger) -- AGM (Absorbed Glass Mat) Battery -- Air ABS (Anti-Lock Brake System) -- Air ABS Blink Codes -- Air ABS Brake Modulator -- Air ABS Electronic Control Unit (ECU) -- AIR (Air Injection Reactor) -- Air Bag -- Air Brake Compressor -- Air Brake Double Check Valve -- Air Brake Dual Air Pressure Gauge -- Air Brake Pressure Protection Valve -- Air Brake Reservoir (Air Tank) Drain Valves -- Air Brake Reservoir Safety Valves -- Air Brakes (Truck and Bus) -- Air Cleaner -- Air Conditioning -- Air-Cooled Engine -- Air Core Gauge -- Air Dam -- Air Density.…”
Full-text access
OPAC'ta görüntüle

Advances in Industrial and Production Engineering Select Proceedings of FLAME 2018 /

İçindekiler: “…Enhanced Fluorescence Based Detection of Vibrio Cells Over Nanoporous Silica Substrate -- Wear Analysis of Al-5083 Alloy Reinforced With Chromium Oxide Filler on Air Jet Erosion Test Rig -- Statistical Analysis of Surface Roughness Using Rsm In Hard Turning of Aisi 4340 Steel With Ceramic Tool -- Parametric Investigation Into Alumina Nano Powder Mixed Edm of Inconel 825 Alloy Using Rsm -- Eco Design Approaches For Developing Eco-Friendly Products: A Review -- Plumbene: A New 2d-Material Resembling Grapheme -- Study the Wear Behaviour Of Al5083-7% B4c Composite Fabricated By Stir Cast Technique -- Study of Machining Performance in Edm Through Response Surface Methodology -- Friction Stir Welding of Thermoplastic Composites -- Numerical Simulation of Temperature Distribution Welding of Aisi 316 -- A Framework for Flexible Job Shop Scheduling Problem Using Simulation-Based Cuckoo Search Optimization -- An Experimental Study to Evaluate the Warpage and Cracking Issues in Fused Deposition Modeling -- Optimization of Electrical Discharge Boron Carbide as Reinforcements.…”
Full-text access
OPAC'ta görüntüle

The politics of policing between force and legitimacy /

İçindekiler: “…Sun -- Watching the watchers : theorizing cops, cameras, and police legitimacy in the 21st century / Kirk Miller -- The politics of private policing : no force and no legitimacy? …”
Full-text access
OPAC'ta görüntüle

The Non-halogenated flame retardant handbook /

İçindekiler: “…2.7 Thermoplastic Elastomers (TPE) and Thermoplastic Polyurethanes (TPU)2.8 Epoxy Resins; 2.9 Unsaturated Polyesters; 2.10 PU Foams; 2.11 Textiles; 2.12 Conclusions and Further Trends; References; 3 Mineral Filler Flame Retardants; 3.1 Introduction; 3.2 Industrial Importance of Mineral Flame Retardants; 3.2.1 Market Share of Mineral FRs; 3.2.2 Synthetic Mineral FRs Within the Industrial Chemical Process Chain; 3.2.3 Natural Mineral FRs; 3.3 Overview of Mineral Filler FRs; 3.3.1 Mineral Filler Flame Retardants by Chemistry; 3.3.2 Classification by Production Process.…”
Full-text access
OPAC'ta görüntüle

The smart city in a digital world / Yazar: Mosco, Vincent

Full-text access
OPAC'ta görüntüle

8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials

İçindekiler: “…Tabatabaee -- Estimation of appropriate filler quantity in asphalt mix from microscopic studies, by A. …”
Full-text access
OPAC'ta görüntüle

Magnesium Technology 2017

İçindekiler: “…Part 1: Magnesium Technology 2017: Keynote Session I -- Multi-scale Investigation on Yield "Symmetry" and Reduced Strength Differential in an Mg-Y Alloy -- Targeting High Impact R&D for Automotive Magnesium Alloys -- Magnesium Development as a Lightweight Material - In Competition with Other Structural Materials -- The Continued Quest for Low-Temperature Formability in Mg Alloys: Historical Developments and Future Opportunities -- Part 2: Magnesium Technology 2017: Alloy Development -- Using the Crystal Plasticity Approach to Parse the Effects of Alloying and Aging on the Mechanical Behavior of Wrought Mg Alloys -- Development of high-strength high-speed-extrudable Mg-Al-Ca-Mn alloy -- Development of ultra-high strength and ductile Mg-Gd-Y-Zn-Zr alloys by extrusion with forced-air cooling -- Effect of Extrusion Ratio on Microstructure and Resulting Mechanical Properties of Mg Alloys with LPSO Phase -- Mechanically Alloyed Magnesium Based Nanostructured Alloy Powders for Stent Applications -- Combined Effects of Grain Size Refinement and Dynamic Precipitation on Mechanical Properties of a New Magnesium -- Alloy -- Machinability Investigation in Micro-milling of Mg based MMCs with Nano-sized Particles -- Part 3: Magnesium Technology 2017: Solidification and Processing I -- Microsegregation in High Pressure Die Cast Mg Alloys -- Numerical simulations of TRC equipped with a core -- Growth of Al8Mn5 intermetallic in AZ91 -- Influence of CaO grain refiner addition on the microstructure and mechanical properties of as-cast Mg alloys -- Grain refinement of Mg and its alloy by inoculation of in-situ MgO particles -- Numerical study of magnesium production by Pidgeon process and pre-prepared pellets silicothermic process: comparison of heat transfer -- On the age hardening response of aluminum containing magnesium sheets with zinc or manganese (AZ- and AM series alloys) -- Performance evaluation of high-pressure die-cast magnesium alloys -- Simulation Study on Direct Desulfurization ofMolten Iron by Magnesium Vapor -- Part 4: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue I -- Twinning super dislocations to help understand strength -- Basal Dislocation Transmutation through {1012} Twin Boundaries -- Ductility Enhancement in Mg alloys by Anisotropy Engineering -- Modeling the effect of alloying elements in magnesium on deformation twin characteristics -- Simulating Discrete Twin Evolution in Magnesium using a Novel Crystal Plasticity Finite Element Model -- The effect of {10-12} twin boundary on the evolution of defect substructure -- Part 5: Magnesium Technology 2017: Solidification and Processing II -- Processing of Mg-sheet via Twin Roll Casting -- Effects of Mn and Zn Solutes on Grain Refinement of Commercial Pure Magnesium -- Experimental investigation of continuous magnesium production by carbothermal reduction -- Precipitation behavior of Mg-Al-Sn-Zn(-Na) alloys -- Study on the Direct Oxidation Thermal Decomposition of MagnesiumChloride byproduct in the Sponge Titanium -- Thermal decomposition kinetics of pre-prepared pellets for the novel silicothermic process -- Thermal Stability of Cryomilled Mg Alloy Powder -- Thermomechanical Processing of Thixomolded Alloys -- Part 6: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue II -- Dynamic behavior of an AZ31 alloy under varying strain rates and stress triaxialities -- Enhancing the tensile response of magnesium through simultaneous addition of aluminium and alumina nanoparticulates -- Effect of solutes additions on the microstructure and mechanical properties of cast Mg-Al based alloys -- Enhanced mechanical properties of extruded Mg-9mass%Al-1mass%Zn-2mass%Ca alloy -- Influence of strain path change on the microstructure and mechanical properties of duplex Mg-Li alloy -- Mechanical Properties and Deformation Mechanism of Mg-Y Alloy with Various Grain Sizes -- Microstructure and Mechanical Properties of High Pressure Die Cast Mg-Al-Sn-Si Alloys -- Microstructure and mechanical properties of an extruded Mg-1.58Zn-0.52Gd alloy -- Modelling Magnesium Alloys for Improved Isotropic and Symmetric Yield Behaviour -- Part 7: Magnesium Technology 2017: Solidification and Processing III and Magnesium-Rare Earth Alloys I -- Scaled-Up Fabrication of Thin-Walled ZK60 Tubing using Shear Assisted Processing and Extrusion (ShAPE) -- Biocompatible Magnesium Alloy ZNdK100 - Adaptation of Extrusion Parameters to Tailor the Mechanical Properties to Different Implant Applications -- Characterization of Semi-closed Die-Forged ZK60 Mg Alloy Extrusion -- Optimization of Nitrogen bubbling conditions for extruded Mg alloy with balanced mechanical properties -- Effects of Gadolinium and Neodymium Addition on Young's Modulus of Magnesium-based Binary Alloys -- Aging behavior of Mg alloys containing Nd and Y -- Variation of Rare Earth Elements in the Magnesium Alloy ME21 for the Sheet Production -- Phase stability and formation in Mg-Gd-Zn alloys - key data for ICME of Mg alloys -- Part 8: Magnesium Technology 2017: Corrosion -- An Electrochemical Investigation of Mg-Ni Hydrogen Storage Alloys by Mechanical Alloying -- Corrosion and creep resistance of thixomolded® magnesium alloys -- Corrosion Properties of Mg-6Al-0.3Mn-aSn-bZn Alloys -- Corrosion of magnesium-aluminum (Mg-Al) alloys - An interplay between Al content and CO2 -- Excimer Laser Processing of Al containing Mg Alloys for Improved Corrosion Resistance -- Effect of Al and Sn on discharge behavior of Mg alloy as anode for Mg-Air battery -- Utilization of a Partially Non-aqueous Electrolyte for the Spatial Mapping of Mg Corrosion using a model Mg-Al Electrode -- Voltammetric Studies of Extruded Pure Magnesium in Different Electrolytes and Its Corrosion Morphology -- Part 9: Magnesium Technology 2017: Magnesium-Rare Earth Alloys II -- Microstructure and mechanical properties of Mg-Zn-Gd alloys after rolling or extrusion processes -- A comparative study on the microstructure, mechanicalproperties, and hot deformation of magnesium alloys containing zinc, calcium and yttrium -- Addition of Holmium & Erbium and Hot-rolling effects on the Microstructure and Mechanical Properties of Mg-Li based Alloys -- Bonding environments in a creep-resistant Mg-RE-Zn alloy -- Microstructural and Numerical Investigation on the Shear Response of a Rare-Earth Magnesium Alloy Sheet -- Solute effect on strength and formability of Mg: A first-principle study -- Understanding on the role of rare earth elements in activation of slip in magnesium: An atomistic approach -- Stabilisation of disordered BCC phases in magnesium-rare earth alloys -- The Effects of Ca Addition on Microstructures and Mechanical Properties of Gravity Cast Mg-Zn-Y Alloy -- Part 10: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue III -- Microstructure and Texture Evolution during Hot Deformation of Cast-Homogenized ZK60 Magnesium Alloy -- Development of Texture during Tensile Test at Room Temperature -- Effect of Ca on the microstructure, texture and mechanical properties in Mg-Zn-Mn based alloy -- Evaluation of in vitro fatigue properties of biodegradable Mg-0.3at.…”
Full-text access
OPAC'ta görüntüle

Advances in Evolutionary and Deterministic Methods for Design, Optimization and Control in Engineering and Sciences

İçindekiler: “…Adjoint Methods for Steady and Unsteady Optimization -- Checkpointing with time gaps for unsteady adjoint CFD, by Jan Christian Hueckelheim and Jens-Dominik Mueller -- Shape Optimization ofWind Turbine Blades using the Continuous Adjoint Method and Volumetric NURBS on a GPU Cluster, by Konstantinos T. …”
Full-text access
OPAC'ta görüntüle

Proceedings of the International Conference on Data Engineering and Communication Technology ICDECT 2016, Volume 1 /

İçindekiler: “…Design & Simulation of Two Stage Operational Amplifier with Miller Compensation in Nano Regime -- Chapter 19. …”
Full-text access
OPAC'ta görüntüle