Arama Sonuçları - composition law

The Quality of European Societies A Compilation of Composite Indicators /

Full-text access

Strain-Hardening Cement-Based Composites SHCC4 /

İçindekiler: “…-Micromechanics-based design of strain hardening cementitious composites (SHCC), by  Junxia Li, Jishen Qiu, Shan He, En-Hua Yang -- Derivation of Crack Bridging Stresses in Fiber Reinforced Cementitious Composites under Combined Opening and Shear Displacements, by Chang Wu, Christopher K.Y Leung -- Bridging Stress of Inclined Fiber in Cementitious Composites Based on Large Deflection Beam Theory, by  Jie Yao, Christopher K. …”
Full-text access

Further Advances in Pragmatics and Philosophy: Part 2 Theories and Applications

Full-text access

Novel Foods in the European Union Yazar: Pisanello, Daniele, Caruso, Giorgia

Full-text access

Italian Studies on Quality of Life

Full-text access

Continuous Media with Microstructure 2

İçindekiler: “…Virtual Power and Pseudobalance Equations for Generalized Continua -- Hypocontinua -- A Refined Theory of the Layered Medium with the Slip at the Interface -- Thermoelastic Waves in Microstructured Solids -- From Second Law Violations to Continuum Mechanics -- Distribution of Temperature in Multicomponent Multilayered Composites -- A Mixture Theory of Porous Media and some Problems of Poroelasticity -- Orthotropic Parameters of PU Foam used in Sandwich Panels -- The Dynamic Modelling of Thin Skeletonal Annular Plates.…”
Full-text access

Challenges in Mechanics of Time-Dependent Materials, Volume 2 Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /

İçindekiler: “…Chapter 1.Modified Hyper-viscoelastic Constitutive Model for Elastomeric Materials -- Chapter 2.Temperature Dependence of Statistical Static Strengths for Unidirectional CFRP with Various Carbon Fibers -- Chapter 3.Time-Temperature Mechanical Response of a PVA Dual Cross-Link Self-Healing Hydrogel -- Chapter 4.Dissipative Damage Theory for Strongly Time-Dependent Composite Materials -- Chapter 5.Understanding Creep-Fatigue Interaction in Fe-25Ni-20Cr (wt.%) Austenitic Stainless Steel -- Chapter 6.The Development of Time Dependent Constitutive Laws of Jujube Flesh -- Chapter 7.Time-Temperature Dependent Creep and Recovery behavior of MWCNTs-Polypropylene Nanocomposites -- Chapter 8.Comparison of Porcine Brain Tissue with Surrogate Materials in Quasi-Static Compression and Dynamic Mechanical Analysis -- Chapter 9.Modeling of Cavitation Erosion Resistance in Polymeric Materials Based on Strain Accumulation -- Chapter 10.Experimental Investigation of Dynamic Strain Aging in 304L Stainless Steel -- Chapter 11.A Case Study to Evaluate Live Load Distributions for Pre-stressed RC Bridge -- Chapter 12.Experimental Investigation of Segmental Post-tensioned Girders -- Chapter 13.Experimental and Numerical Evaluations of Live Load Distributions of Steel-Concrete Composite Bridge -- Chapter 14.Strain Rate Dependent FEM of Laser Shock Induced Residual Stress.…”
Full-text access

Petroleum Science and Technology Yazar: Hsu, Chang Samuel, Robinson, Paul R.

Full-text access

Biomechanics of Anthropomorphic Systems

Full-text access

Graphene Functionalization Strategies From Synthesis to Applications /

Full-text access

Soft Methods for Data Science

İçindekiler: “…Mean Value and Variance of Fuzzy Numbers with Non-continuous Membership Functions -- On the Construction of Radially Symmetric Trivariate Copulas -- Simulation of the Night Shift Solid Waste Collection System of Phuket Municipality -- Updating Context in the Equation: An Experimental Argument with Eye Tracking -- Black-Litterman Model with Multiple Experts' Linguistic Views -- Representing Lightweight Ontologies in a Product-Based Possibility Theory Framework -- Asymptotics of Predictive Distributions -- Independent K-Sample Equality Distribution Test Based on the Fuzzy Representation -- Agglomerative Fuzzy Clustering -- Bayesian Inference with Linkage Uncertainty: Applications in Official Statistics -- The Extension of Imprecise Probabilities Based on Generalized Credal Sets -- A Generalized SMART Fuzzy Disjunction of Volatility Indicators Applied to Option Pricing in a Binomial Model -- The Representation of Conglomerative Functionals -- The Likelihood Interpretation of Fuzzy Data -- Combining the Information of Multiple Ranker in Ranked Set Sampling with Fuzzy Set Approach -- A Savage-like Representation Theorem for Preferences on Multi-acts -- On Some Functional Characterizations of (fuzzy) Set-Valued Random Elements -- Maximum Likelihood Under Incomplete Information: Toward a Comparison of Criteria -- The Use of Uncertainty to Choose Matching Variables in Statistical Matching -- Beyond Fuzzy, Possibilistic and Rough: An Investigation of Belief Functions in Clustering -- Small Area Estimation in Presence of Linkage Errors -- A Test for Truncation Invariant Dependence -- Finite Mixture Of Linear Regression Models: An Adaptive Constrained Approach to Maximum Likelihood Estimation -- Detecting Dependence in Tourists' Spending Behavior -- Robust Fuzzy Clustering via Trimming and Constraints -- One-factor Levy-frailty Copulas with Inhomogeneous Trigger Rates -- A Perceptron Classifier and Corresponding Probabilities -- Fuzzy -Signals Fed to Gaussian Channels -- Fuzzy Clustering Through Robust Factor Analyzers -- Consensus-based Clustering in Numerical Decision-Making -- Spatial Outlier Detection Using GAMs and Geographical Information Systems -- Centering and Compound Conditionals Under Coherence -- Approximate Bayesian Methods for Multivariate and Conditonal Copulae -- The Sign Test for the Interval-Valued Data -- Probability Distributions Related to Fuzzy P-Values -- Probabilistic Semantics and Pragmatics for the Language of Uncertainty -- Dynamic Analysis of the Development of Scientific Communities in the Field of Soft Computing -- Talk to your Neighbour: a Belief Propagation Approach to Data Fusion -- The Qualitative Characteristics of Combining Evidence with Discounting -- Measuring the Dissimilarity Between the Distributions of Two Random Fuzzy Numbers -- An Empirical Analysis of the Coherence Between Fuzzy Rating Scale- and Likert Scale-Based Responses to Questionnaires -- Asymptotic Results for Sums of Independent RandomVariables with Alternating Laws -- Dispersion Measures and Multidistances on Rk -- Full Conglomerability, Continuity and Marginal Extension -- On Extreme Points of P-Boxes and Belief Functions -- Modelling the Dependence in Multivariate Longitudinal Data by Pair Copula Decomposition -- Predictability in Probabilistic Discrete Event Systems -- A Sandwich Theorem for Natural Extensions -- Envelopes of Joint Probabilities with Given Marginals Under Absolute Continuity or Equivalence Constraints -- Square of Opposition Under Coherence -- Testing of Coarsening Mechanisms: Coarsening at Random Versus Subgroup Independence -- Two-sample Similarity Test for the Expected Value of Random Intervals -- Handling Uncertainty in Structural Equation Modeling -- Detecting Inconsistencies in Revision Problems -- Tukeys Biweight Loss Function for Fuzzy Set-Valued M-Estimators of Location -- Technical Gestures Recognition by Set-Valued Hidden Markov Models with Prior Knowledge -- Time Series ModelingBased on Fuzzy Transform -- Back to \Reasoning" -- Lexicographic Choice Functions Without Archimedeanicity -- Composition Operator for Credal Sets Reconsidered -- A Nonparametric Linearity Test for a Sort of Multivariate Regression Model with Fuzzy Data -- Treat a Fuzzy Dependence Among Causes and Lives in Insurance with Some Copulas Based Approaches -- A Portfolio Diversication Strategy via Tail Dependence Clustering -- An Upper Bound Estimation About the Sample Average of Interval-valued Random Sets -- On Asymptotic Properties of the Multiple Fuzzy Least Squares Estimator.…”
Full-text access

Recent Developments in Data Science and Intelligent Analysis of Information Proceedings of the XVIII International Conference on Data Science and Intelligent Analysis of Informatio...

Full-text access

Handbook of Peridynamic Modeling. Yazar: Bobaru, Florin

İçindekiler: “…-- 10.8 The importance of nonlocal modeling in crack branching -- 10.9 Conclusions -- References -- 11 Relations between Peridynamic and Classical Cohesive Models -- 11.1 Introduction -- 11.2 Analytical PD-based normal cohesive law -- 11.2.1 Case 1- No bonds have reached critical stretch -- 11.2.2 Case 2- Bonds have exceeded the critical stretch -- 11.2.3 Numerical approximation of PD-based cohesive law -- 11.3 PD-based tangential cohesive law -- 11.3.1 Case 1- No bonds have reached critical stretch -- 11.3.2 Case 2- Bonds have exceeded the critical stretch -- 11.4 PD-based mixed-mode cohesive law -- 11.5 Conclusions -- References -- 12 Peridynamic Modeling of Fiber-reinforced Composites -- 12.1 Introduction -- 12.2 Peridynamic analysis of a lamina -- 12.3 Peridynamic analysis of a laminate -- 12.4 Numerical results -- 12.5 Conclusions.…”
Full-text access

Light Metals 2017

İçindekiler: “…Part 1: Alumina & Bauxite: Digestion and Calcination -- CFB Alumina Calciners - New and Future Generation Opportunities for Green Field Refineries -- Evolutional Development of Alkaline Aluminosilicates Processing Technology -- Characterization and Ore Dressing of Bauxite from Brazil -- Process Optimization for Diaspore Digestion Equilibrium using Response Surface Methodology -- Thermodynamic analysis and formation law of Q phase of calcium aluminate clinker -- Leaching Behavior of Alumina from Smelting Reduction Calcium Aluminate Slag with Sodium Carbonate Solution -- Part 2: Alumina & Bauxite: Bauxite Residues Technology -- Security Disposal and Comprehensive Utilization of Bauxite Residues -- Bauxite Residue Amendment Through the Addition of Ca and OR Mg Followed By Carbonation -- Application of Tricalcium Aluminate Instead of Lime for the recovery of aluminum in Middle-low Grade Bauxite in Calcification-Carbonization Process -- Low Temperature Reduction of Hematite in Red-Mud to Magnetite -- Recovery of Iron-, Titanium-bearing Constituents from Bauxite Ore Residue via Magnetic Separation Followed by Sulfuric Acid Leaching -- Processing diasporic red mud by the calcification-carbonation method -- Research of Flocculants and Dewatering Additives for Filtration of Red Mud -- Characterization of activated alumina production via spray pyrolysis -- Part 3: Alumina & Bauxite: Non-traditional Resources -- New process research on aluminium production from non-traditional aluminum resource by microwave chlorination -- Opportunities of pseudoboehmite processing from aluminum content raw material at sintering method -- Chemical Alumina Preparation by Using High Alumina Content Fly Ash -- A Novel Process of Alumina Production from Low-grade Bauxite Containing Sulfur -- Iron separation from bauxite through smelting-reduction process -- Thermodynamic behavior of lime desulfurization in sodium aluminate solution -- Part 4: Alumina & Bauxite: Poster Session -- A study on optimization ofprocessing parameters for synthesis of calcium hydroaluminosulfate using response surface methodology -- Part 5: Aluminum Alloys, Processing and Characterization: Alloy Development and Applications -- Design of New 6xxx Series Al Alloy Using the CALPHAD Thermodynamic Database -- Study of an Al-Ca Alloy with Low Young's Modulus -- Production Of 3004 Aluminum Alloy Sheet For Structural Applications From Twin Roll Casting -- Aluminum alloys with tailored TiB2 particles for composite applications -- Development of low expansion and high strength aluminium hybrid composite -- Part 6: Aluminum Alloys, Processing and Characterization: Solidification and Casting -- A model for a-Al(Mn,Fe)Si crystals -- Casting Characteristics of High Cerium Content Aluminum Alloys -- In-situ observation of fragmentation of primary crystals by ultrasonic cavitation in water -- The enhancement of mechanical properties of A356 alloy solidified at lower cooling rate via effectively grain refinement -- Secondary Aluminum Alloys Processed by Semisolid Process for Automotive Application -- Integrated casting-extrusion of an AA6082 aluminum alloy -- On Porosity Formation in Al-Si-Cu Cast Alloys -- Part 7: Aluminum Alloys, Processing and Characterization: Characterization -- Algorithm for Finding the Correlation between the Properties of Wrought Aluminum Alloys, the Chemical Composition and the Processing Parameters -- Analysis of an aluminium alloy containing trace elements -- Determination of aluminum oxide thickness on the annealed surface of 8000 series aluminum Foil by Fourier Transform Infrared Spectroscopy -- Test Uncertainty in Chemical Composition Analysis -- Real Time 3D Imaging and Laser Marking System for Industrial Traceability -- Production and Certification of Arconic Certified Reference Materials -- Characterization of Large Strain Extrusion Machining (LSEM) of AA7050 -- Interaction between fatigue micro-cracks and inclusion/matrix interface in high-strength Al alloy -- Influence of trace element additionson Fe bearing intermetallic solidification of a 6063 Al alloy -- Part 8: Aluminum Alloys, Processing and Characterization: Heat Treatment -- THE OPTIMIZATION OF THE HOMOGENIZATION TREATMENT OF AA7075 -- Precipitation modeling and validation of Al-5%Cu-0.4%Mn alloy using quench factor analysis -- Young's modulus of Al-Si-Mg-Cu based alloys under different heat treatment processes -- Intergranular Corrosion Investigation on EN-AW 6082 Redraw Rod -- The influence of process parameters and thermomechanical history on streaking defects in AA6060 extrusions -- Effect of Heat-treatment on Microstructure and Mechanical Properties of Sonicated Multicomponent AlMgSiCuZn Alloy -- Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys -- Part 9: Aluminum Alloys, Processing and Characterization: Plasticity and Mechanical Behavior -- New Yield Criterion for Description of Plastic Deformation of Face-Centered Cubic Single Crystals -- Quantifying As-cast and Homogenized AA7050 Mechanical Properties through Compression Testing -- Determining a Stable Texture Condition Under Complex Strain Path Deformations in Face Centered Cubic Metals -- Microstructural transition and elevated temperature tensile properties of modified Al-Si-Cu-Mg alloys -- Effects of alloying elements on anneal-hardening behavior of aluminum alloy foils -- Increasing strength and corrosion resistance of AlMgSi alloys by tailor-made thermomechanical processing -- Microstructural optimization of a High Mechanical Properties (HMP) aluminum alloy by using CobaPress™ process -- Cyclic Stress-strain Behavior and Low Cycle Fatigue Life of AA6061 Aluminum Alloy -- Part 10: Aluminum Alloys, Processing and Characterization: Poster Session -- Corrosion of Al-Mg Alloys in Ethanol -- Warm pressing of Al powders: an alternative consolidation approach -- Part 11: Aluminum Reduction Technology: Dry Scrubbing, Alumina Transport and Dissolution -- Spreading of Alumina and Raft Formation on the Surface of Molten Cryolite -- Fluoride Capture Capacity of SGA: The Interplay between Particle and Pore Size Distribution -- Predictive Formulae for the Competitive Adsorption of HF and SO2 on Smeltergrade Alumina Used in Dry Scrubbing Applications -- Pot Gas Treatment at High Gas Temperatures -- Influence of Handling Parameter on Powder Properties -- Part 12: Aluminum Reduction Technology: Anode Effect and PFC Emissions -- Preventive Treatment of Anode Effects Using On-Line Individual Anode Current Monitoring -- Reduction in EGA Jebel Ali Potroom GHG Emissions -- Partial Anode Effect in a Two-Compartment Laboratory Alumina Reduction Cell -- Co-evolution of Carbon Oxides and Fluorides during the Electrowinning of Aluminium with Molten NaF-AlF3-CaF2-Al2O3 Electrolytes -- Part 13: Aluminum Reduction Technology: Cell Lining Materials -- Chemical stability of thermal insulating materials in sodium vapour environment -- AGING OF INSULATING LININGS IN ALUMINIUM ELECTROLYSIS CELLS -- Cathode Wear Based on Autopsy of a Shut down Aluminium Electrolysis Cell -- SPL Recycling and Re-Processing -- Alternative applications of SPL: Testing ideas through experiments and mathematical modeling -- Part 14: Aluminum Reduction Technology: Cell Voltage and Pot Control -- Clustering Aluminium Reduction Cells -- Application of Multivariate Statistical Process Control with STARprobeTM Measurements in Aluminium Electrolysis Cells -- Study Of Impact Of The Anode Slots On The Voltage Fluctuations Of Aluminium Electrolysis Cell Using Bubble Layer Simulator -- Detecting, Identifying and Managing Systematic Potline Issues with Generation 3 Process Control -- Predicting Instability and Current Efficiency of Industrial Cells -- Part 14: Aluminum Reduction Technology: Electrolyte and Fundamentals -- Sodium in Aluminium as a Cell Performance Indicator: A Quantitative Framework -- Bauxite processing via chloride route to produce chloride products and subsequent electrolysis of aluminium chloride to produce aluminium metal -- Stability of Chlorides in Cryolitic Electrolyte -- Role of Heat Transfer in the Formation of Carbon Oxides in Smelting Cells -- Part 15: Aluminum Reduction Technology: Modelling and Cell Design -- Improving The Understanding Of BUSBAR Design And Cell MHD Performance -- LES turbulence modeling approach for molten aluminium and electrolyte flow in aluminum electrolysis cell -- MHD of Large Scale Liquid Metal Batteries -- Low energy consumption cell designs involving…”
Full-text access

Design Computing and Cognition '18

İçindekiler: “…, by Abhijna Neramballi, Tomohiko Sakao and John Gero -- Visual behaviour during perception of architectural drawings: differences between architects and non-architects, by Luis Vasconcelos, ChihChun Canan Colaco andCengiz Acarturk -- DESIGN GRAMMARS: On John Portman's Atria: Two Exercises in Hotel Composition, by Heather Ligler and Athanassios Economou -- Monitoring China's City Expansion in the UrbanRural Fringe: A Generative Grammar for Binjiang District in Hangzhou, by Ruichen Ni and Jose Duarte -- Composite Shape Rules, by Rudi Stouffs and Dan Hou -- Shape Grammars as a Probabilistic Model for Building Type Definition and Computation of Possible Instances: The Case Study of Ancient Greek and Roman Libraries, by Myrsini Mamoli -- Grammars for Making Revisited, by Djordje Krstic -- DESIGN PROCESSES: Rule-based systems in adaptation processes: a methodological framework for the adaptation of office buildings into housing, by Camilla Guerritore and Jose Duarte -- Using Argumentative, Semantic Grammar for Capture of Design Rationale, by Raymond McCall -- Identifying Design Rationale Using Ant Colony Optimization, by Miriam Lester and Janet Burge -- Biased Decision Making in Realistic ExtraProcedural Nuclear Control Room Scenarios, by Emil Andersen, Igor Kozine and Anja Maier -- DESIGN MODELLING: Modelling Collaboration in Parameter Design using Multiagent Learning, by Daniel Hulse, Kagan Tumer, Christopher Hoyle and Irem Tumer -- Exploring the Effect of Experience on Team Behaviour: A Computational Approach, by Marija Majda Perisic, Mario Storga and John Gero -- An Exploration of the Effects of Managerial Intervention on Engineering Design Team Performance, by Joshua Gyory, Jonathan Cagan and Kenneth Kotovsky -- A Study in Function Modeling Preferences and its Variation with Designer Expertise and Product Types, by Xiaoyang Mao and Chiradeep Sen -- DESIGN AND VISUALIZATION: Information Visualisation for Project Management: Case Study of Bath Formula Student Project, by Nataliya Mogles, Lia Emanuel, Chris Snider, James Gopsill, Sian JoelEdgar, Kevin Robinson, Ben Hicks, David Jones and Linda Newnes -- A Visualisation Tool to Investigate the Interplay of External and Internal Processes, by MiaArdiati Tedjosaputro and Yi Teng Shih -- Visual Interactivity to Make Sense of Heterogeneous Streams of Design Activity Data, by Yasuhiro Yamamoto and Kumiyo Nakakoji -- Style-Oriented Evolutionary Design of Architectural Forms Directed by Aesthetic Measure, by Agnieszka Mars, Ewa Grabska, Grażyna Ślusarczyk and Barbara Strug -- Creative Sketching Apprentice: Supporting Conceptual Shifts in Sketch Ideation, by Pegah Karimi, Kazjon Grace, Nicholas Davis and Mary Lou Maher -- First Author Email Index -- Author Index.…”
Full-text access

Industrial chemistry of oxides for emerging applications / Yazar: Pawłowski, Lech, Blanchart, Philippe

İçindekiler: “…1.2.7 CaO1.2.8 P2O5; References; Chapter 2 Fundamentals of Oxide Manufacturing; 2.1 Introduction; 2.1.1 Principal Manufacturing Processes; 2.1.2 Oxide Powders; 2.1.3 Major Phenomena in Manufacturing; 2.2 Fundamentals of Selected Processes Related to Oxide Manufacturing; 2.2.1 Introduction; 2.2.2 Fundamentals of Reactions in Gaseous Phase; 2.2.2.1 Types of Reaction; 2.2.2.2 Thermodynamic Calculations; 2.2.2.3 Gas in Motion; 2.2.2.4 Thermodynamics of Condensation; 2.2.3 Fundamental Phenomena in Solutions; 2.2.3.1 Introduction; 2.2.3.2 Diffusion; 2.2.3.3 Brownian Motion and Stokes' Law.…”
Full-text access

Advanced Tire Mechanics. Yazar: Nakajima, Yukio

İçindekiler: “…Intro -- Preface -- References -- Contents -- 1 Unidirectional Fiber-Reinforced Rubber -- 1.1 Composite Materials Used for Tires -- 1.2 Stress/Strain Relationship -- 1.3 Mechanics of a Composite -- 1.3.1 Plane Stress -- 1.3.2 Transformation of Strain Between Two Coordinate Systems -- 1.3.3 Constitutive Equation (Hook's Law) -- 1.3.4 Representation of the Stiffness Matrix Using Invariants -- 1.3.5 Properties of a Composite in an Arbitrary Direction -- 1.4 Micromechanics -- 1.4.1 Parallel and Series Models -- 1.4.2 Modified Micromechanics -- 1.4.3 Upper and Lower Bounds of the Modulus of Composites -- 1.4.4 Halpin-Tsai Model -- 1.5 Micromechanics of Unidirectionally Cord-Reinforced Rubber (UDCRR) -- 1.5.1 Models for UDCRR -- 1.5.2 Comparison of the Micromechanics Model for Fiber-Reinforced Rubber -- 1.6 Mechanics of UDCRR Under an FRR Approximation -- 1.6.1 Approximate Equations for UDCRR -- 1.6.2 Properties of UDCRR in an Arbitrary Direction -- 1.6.3 Particular Angle for UDCRR -- 1.6.4 Comparison of Micromechanics and Experimental Results -- 1.7 Viscoelastic Properties of a UDCRR Plate -- 1.7.1 Studies on the Viscoelastic Properties of a UDCRR Plate -- 1.7.2 Analytical Damping Model -- 1.7.3 Finite Element Model for Viscoelastic Properties -- 1.8 Mechanics of Short-Fiber-Reinforced Rubber (SFRR) -- 1.8.1 Micromechanics of SFRR -- 1.8.2 Modulus of SFRR in an Arbitrary Direction -- 1.8.3 Viscoelastic Properties of SFRR -- Appendix: Viscoelasticity -- Notes -- References -- 2 Lamination Theory -- 2.1 CLT -- 2.1.1 Coordinate System for Laminates and Representation of the Laminate Configuration -- 2.1.2 CLT -- 2.2 Properties of a Symmetric Laminate -- 2.2.1 Constitutive Equation of a Symmetric Laminate -- 2.2.2 In-Plane Stiffness of a Symmetric Laminate -- 2.2.3 Bending Properties of a Symmetric Laminate -- 2.3 Properties of a Bias Laminate.…”
Full-text access

Proceedings of the 3rd International Conference on Intelligent Technologies and Engineering Systems (ICITES2014)

İçindekiler: “…Active Closed-Loop Gap Control for Aerostatic Bearing -- Firefly Algorithm for Power Economic Emission Dispatch -- Application of the Taguchi Method to the War page for Light Guide Plate -- Diagnosis of Muscle Properties in Low-Back-Pain with Electrical Bio impedance Methodology -- Low Cost Wearable Control Valves with No Mechanical Sliding Parts in Valves -- Estimation of Residual Traveling Distance for Power Wheelchair Using Neural Network -- Residual Whitening Method for Identification of Induction Motor System -- Analysis and Simulation of Small-sized Quasi-servo Valve Using Tiny On/off Control Valve -- Analysis of Flexible Thin Actuator Using Gas-Liquid Phase-Change of Low Boiling Point Liquid -- Development of Flexible Pneumatic Cylinder with String Type Displacement Sensor for Flexible Spherical Actuator -- Evaluation of Computing Reliability in Internet Computing -- An Effective Method for Classification of White Rice Grains Using Various Image Processing Techniques -- Applying Zig Bee Wireless Sensors and Photovoltaic System to Plant Factory -- Applying Particle Filter Technology to Object Tracking -- Measurement of Thickness and Refractive Index of Optical Samples in FD-OCT with Two Orthogonal Polarized Lights -- Fabrication of Peristaltic Micro pump with UV Curable Adhesive -- Detecting Object Edges by Xtion Pro and Open Sources -- Temperature Control of a Baking System for an Ultra-high-vacuum Insertion Device -- Microarray Data Analysis with Support Vector Machine -- Feature Selection Algorithm for Motor Quality Types using Weighted Principal Component Analysis -- Feasibility Test of Range of Motion Exercise for Ankle Joints Rehabilitation using Pneumatic Soft Actuators -- 3D Motion Editing Through B-Spline Fitting with Constraints -- An ARAR-Tree-Based Diagnosis Mechanism for Rule Anomalies among Internet Firewalls -- Development of Active Orthosis for Lumbago Relief -- Controller Design by Time-domain Objective Functions Using Cuckoo Search -- Behavior Network-basedRisk Recognition Method -- Reinforcement Learning with Multiple Actions -- Wind Turbine Blade Load Alleviation Performance Employing Individual Pitch Control -- Planet Editing Method using Leap Motions -- Development of Flexible Haptic Robot Arm Using Flexible Pneumatic Cylinders with Backdrivability for Bilateral Control -- Integration Method of Proxy and Producer-Consumer Patterns -- Bayesian Probability and User Experience-based Smart UI Design Method -- Bayesian Probability-based Hand Property Control Method -- Implementation of a Delta-Sigma Analog-to-Digital Converter -- An Experimental Investigation of Effect on Engine Performance by Controlling the Temperature of the Fuel -- Modeling of an AIGaAs-based VCSEL with Bragg Mirrors -- Risk Decision Method based on Sensory Values of Smart Devices -- A Flywheel Energy Storage System Suspended by Active Magnetic Bearings Using a Fuzzy Control with Radial Basis Function Neural Network -- A Matrix Robot for Block-Stacking -- A Study of Regular Transmission Delay in Bluetooth Communications -- IEEE 802.16J-Based Multihop Relays for Future Performance Enhancement of Aeronautical Mobile Airport Communications Systems (AeroMACS) -- Explore the Influential Factors on Maritime Accidents by Regression Approach -- Analytical Model of Pipe Inspection Robot Using Flexible Pneumatic Cylinder -- Thermal Resistance Characterization of SIGe Based HBTs on Thick-Film and Thin-Film SOI -- Improved Item Relational Structure Theory Based on Liu's Item Ordering Consistence Property -- Enhancement of Digitized Old Film Using Inpainting Based Method -- Study of Nickel Catalysts Deposited by using the Electroless Plating Method and Growth the Multiwall Carbon Nanotubes -- Photovoltaic Power Generation System Modeling Using and Artificial Neural Network -- Thermal Stress Analysis of Layer-Wise Functionally Graded Material Beam Considering Neutral Plane -- A Smart Home Automation System -- Material Structure Selection of Solution Blue OLEDs Using a Design of Experiment -- Development of Software Inspection Tools for Defect Examination in Machine Vision Applications -- A Design of a Light Guide for Highly Uniform Illumination -- A Study on the Performance Characteristics of a Synchronous Elastic FIR Filter -- A Design of Cavity Filters based on Photonic Crystal Slab Waveguide with Liquid Crystal -- A Self-Focus High Precision Scheme Applied to HCPV Solar Center Tracker -- Controlling Flock through Normalized Radial Basis Function Interpolation -- Novel AF Relay Design for Optimizing a MIMO Relay Network under Backward Non-Flat Fading Channels -- Development of Wearable Power Assist Wear Using Pneumatic Actuators -- Cost Model of Physical Activity Monitoring Systems -- The BCI Control Applied to the Interactive Autonomous Robot with the Function of Meal Assistance -- Design of a Transparent Pipeline-Based Multiplier -- An IP-Based Design to Achieve Power Reduction -- Crystalline Indium-doped Zinc Oxide Thin Films Prepared by RF Magnetron Reactive Sputtering -- The Construction and Efficiency Validation of an Educational Module of Pneumatics Robotics Arm Controlled by Programmable Logic Controller (PLC) -- GPU Computations on Hadoop Clusters for Massive Data Processing -- A HHT Based Music Synthesizer -- Decentralized Robust Estimation of Interconnected Systems with State-Dependent Impulse Disturbances -- A Lean Analysis to Automate the Draw Operations at a Tube Manufacturing Company -- Classification of the ECG Signal using Artificial Neural Network -- Integration Method of Composite Pattern for Solving Structure Problems of Visitor Pattern -- A Circuit Design of Dimming T8 LED Tube for High Power Factor Correction -- Anti-ESD Improvement b the Bulk-Fox Structure in HV nLDMOS Devices -- N+ Extended-Distribution Influences on Anti-ESD Ability in the 60-V pLDMOS-SCR (NPN arranged-type) -- Wrist Eye: An Elderly Computer Learning Assistant with Wrist-Wearable Devices -- A Study of Ultrafast Laser-Based X-Ray Sources for In-Line Phase-Contrast Biomedical Imaging -- PC-USB-Based Real-Time Control Systems Using Quadratic Optimal Control Method -- A Bibliometric Analysis on Data Minding Using Bradford's Law.…”
Full-text access

Advances in Mechanism Design II Proceedings of the XII International Conference on the Theory of Machines and Mechanisms /

İçindekiler: “…Kühhorn -- Part V Optimization of Mechanisms and Machines, Mechanisms of Textile Machines -- Composite Production and Industrial Robot Trajectory Calculation, by T. …”
Full-text access

Proceedings of International Conference on ICT for Sustainable Development ICT4SD 2015 Volume 2 /

İçindekiler: “…Critical Study and Analysis of Cyber Law Awareness amongst the Netizens -- Chapter 33. …”
Full-text access