Search Results - slag (novel)

8th International Symposium on High-Temperature Metallurgical Processing

Table of Contents: “…Part 1: Energy Efficient Clean Metallurgical Technology -- Flash Ironmaking from Magnetite Concentrate in a Laboratory Reactor: Experimental and CFD Work -- Synthesis of Chromite for Subsequent Carburization by Methane-hydrogen Gas Mixture -- Effects of Hydrogen-enriched Reduction on Metallurgical Properties of Iron-Bearing Burdens under BF Operation with Cog Injection -- Microwave-intensified Reduction of Biochar-containing Briquettes -- Refractory Challenges in Lead Recycling Furnaces -- Synthesis of Carbide Ceramics via Reduction of Adsorbed Anions on an Activated Carbon Matrix -- Part 2: Simulation of High Temperature Process -- A CFD Based Algorithm for Kinetics Analysis of the Reduction of Hematite Concentrate by H2+CO Mixtures in a Drop Tube Reactor -- A Continuous Dynamic Process Model to Design a Carbon Profile toward Yield Improvement -- Alloy Yield Prediction Model Based on the Data Analysis in EAF Steelmaking Process -- Analysis of Jet Behavior and Surface Fluctuations in the Meniscusof Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling -- CFD Study of Gas-liquid Phase Interaction Inside a Submerged Lance Smelting Furnace for Copper Smelting -- Debottlenecking High Temperature Metallurgical Plants through Modeling and Simulation -- Assessment of Slag Entrainment in a RH Degasser through Physical Modelling Using Circulating Fluids of Different Densities/Oil Systems for Simulating Steel Melt/Slag -- Part 3: Fundamental Research of Metallurgical Process -- Investigate on the Phase Composition of Vanadium Slag with High CaO Content and Influence of P2O5 on Crystallization Kinetics of Spinels -- Thermal Analysis Kinetics of the Solid-State Reduction of Nickel Laterite Ores by Carbon -- Thermodynamic and Experimental Investigations of High Temperature Refractory Corrosion by Molten Slags -- Thermodynamic Calculation on the Reactivity between Slag and Ti-stabilized Stainless Steel -- Part 4: Alloys and Materials Preparation -- Development of a Novel, Low-cost Titanium Extraction Process for Bulk or Powder Applications -- Evolution of Non-metallic Inclusions in Solid Fe-Al-Ti-N Alloy during Heating -- Preparation of Low-carbon Ti2O3 by Carbon thermal Reduction of the Mixture of Titanium Dioxide and Activated Carbon under Vacuum Condition -- Pyrometallurgical Studies for Manganese Extraction Using Turkish Ore Reserves -- Trace Elements Behavior during the Oxidation of Liquid SiMn Alloy -- Effect of Microalloy Elements V And Mg on Organization at High Heat Input Welding Shipbuilding Structure Steel -- Part 5: Extraction and Recovery of Metals -- Effect of Carbon Reductant On The Formation of Copper Doped Titanium Oxycarbonitride by Carbothermal Reduction and Nitridation -- Cohering Behavior of Scrap Powder in Kiln by a Novel Natural Stacking Method -- Direct-to-blister Copper Smelting with the ISASMELT™ Process -- Improving Separation of Cu-Fe from Copper Slag by Mineral Phase Reconstruction -- Phase Transformation of High Calcium Type Tin, Iron-bearing Tailings during Magnetizing Roasting Process -- Sensitivity of Contactless Ultrasound Processing to Variations of the Free Surface of the Melt with Induction Heating -- Extraction of Zinc from Willemite by Sodium Salt Roasting and Ammonia-leaching Process -- Part 6: Ironmaking and Steelmaking -- Influence of Puhrstahl Heraeus Refining Process on Aluminum Consumption in Interstitial-Free Steel Smelting Process -- Formation Mechanisms of Inclusions in Spring Steels -- Investigation on Coal Combustion Behaviors under the Oxygen Blast Furnace -- Inclusion Control with Ca Treatment to Improve Castability of a Low Carbon Al Killed Steel -- High Temperature Mineralization Mechanism of Granules during Iron Ore Sintering Process -- Reduction Behaviors of Sinter Made from Magnetite Concentrates in Reducing Process Simulated COREX Shaft Furnace -- Part 7: Treatment and Recycling of Slag/Wastes -- Introduction of Matte Droplets in Copper Smelting Slag -- Dissolution Behavior of Fe from Glassy Oxide Phase in Steelmaking Slag -- Penetration Depth of Microwave in Tire Rubber -- Effect of TiO2 on Thermophysical Properties and Structure of P-bearing Steelmaking Slags -- Analysis for Optimum Conditions for Recovery of Valuable Metals from E-Waste through Black Copper Smelting -- Precipitation Behavior of MxTi3-xO5 in the Titanium-Bearing Electric Furnace Slag -- Part 8: Utilization of Complex Ores -- Evaluation of Molybdenum Concentrates -- Intensification of Gold Leaching from a Multi-refractory Gold Concentrate by the Two-stage Roasting-alkaline Sulfide Washing-cyanidation Process -- The Recovery of Cobalt from Copper Converter Slag by Reduction-sulfurization Smelting at High Temperature -- Roasting of Celestite in Laboratory Scale Rotary Furnace -- The Experimental Study of CaCO3 in the Vanadium Extraction Process -- The Extraction of Zinc from Zinc Ferrite by Calcified Roasting and Ammonia Leaching Process -- Part 8: Poster I -- A New Method to Detect the High Temperature Distribution in the Ironmaking and Steelmaking Industry -- A Study for Reconstructing the Three-dimensional Temperature Field of a Blast Furnace Raceway Based on Monte Carlo Method -- Behaviour of Silicon in Nickel Laterite by Carbothermic Reduction in Vacuum -- Effect of CaO Addition on the Behavior of Vanadium and Phosphorus during Oxidation and Leaching Process -- Effect of Inner Shape on Blast Furnace Performance for Iron Making -- Effect of Lance Configurations on Coal Flow and Combustion Characteristics -- Effect of Silicon on Removal of Phosphorus from High Phosphorus Si-Mn alloy by CaO-Based Slag -- Effect of Super Gravity on the Solidification Structure and C Segregation of High Carbon Steel -- High Temperature Distribution Measurement of the Blast Furnace Raceway through Imaging Techniques and Optimization Algorithms -- Kinetics and Reduction Behavior of Self-reducing Briquettes Containing Blast Furnace Dust -- Model Analysis of the Phenomena of Pulverized Coal Injection in Blast Furnace -- Sintering Performance of Blends Containing High Proportion of Limonite Iron Ore Fines -- Thermodynamics Study on Phosphorus Distribution between 2CaO•SiO2-3CaO•P2O5 Solid Solution and Liquid Slag -- Two-step Copper Smelting Process at Dongying Fangyuan -- Part 9: Poster II -- Comparison of the Ringing Characteristics between Acid and Alkaline Iron Ore Pellets Powder in Kiln -- Comprehensive Utilization of Ludwigite Iron Concentrate by Gas-based Direct Reduction -- Decarburization of Spent Petrochemical Catalysts via Microwave Oxidation Roasting -- Effect of FeO Content in Laterite Nickel Slag on the Corrosioin Behaviour of Refractory Materials -- Effects of Blowing Conditions on the Dispersion States of Materials Charged into Bottom Blown Oxygen Smelting Furnace -- Effects of Pre-oxidation and Additives on Carbothermic Reduction of Ilmenite Concentrate -- Influence of Converter Slag on Decomposition Behavior of Limestone during BOF Steelmaking Process -- Influence of Hot Charge on Blast Furnace Performance for Iron Making -- Investigation and Application of Evolution System of Stock Surface Gas Flow Distribution in Blast Furnace -- Investigation of the Carbothermic Reduction of Chromium-containing Vanadium Extraction Residue -- Molecular Dynamics Study of the Structural Properties with Varying -- One-step Extraction of Lead from Spent Lead-acid Battery Paste via Reductive Sulfur-fixing Smelting: Thermodynamic Analysis -- Removal of Cd(II) Ion from Aqueous Solution by Adsorption on Wasted Low Grade Phosphorus-containing Iron Ore -- Research on the Flow Behavior of Molten Slag through Pore -- Study on the Influence of Materials on Heat Transfer Characteristics of Blast Furnace Cooling Staves.…”
Full-text access

9th International Symposium on High-Temperature Metallurgical Processing

Table of Contents: “…Ironmaking, Steelmaking and Casting -- Optimization of Exothermic Riser Sleeve Design Parameters -- Assessment of Gas-Slag-Metal Interaction during a Converter Steelmaking Process -- On the Role of Nb on the Texture and Mechanical Properties of a Novel As-rolled Medium Carbon Wear Resistant Slurry Pipeline Steel -- A Statistical Analysis of Process Abnormalities in Slab Casting -- Effect of Density Difference on Particle Segregation Behaviors at Bell-less Top Blast Furnace with Parallel-type Hopper -- The Effect of Austenitizing Temperature on Hardenability, Precipitation and Mechanical Properties of Boron Bearing Cr-Mo Alloy Steel -- Part 8. …”
Full-text access

10th International Symposium on High-Temperature Metallurgical Processing

Table of Contents: “…Ironmaking, Steelmaking and Casting -- Optimization of Exothermic Riser Sleeve Design Parameters -- Assessment of Gas-Slag-Metal Interaction during a Converter Steelmaking Process -- On the Role of Nb on the Texture and Mechanical Properties of a Novel As-rolled Medium Carbon Wear Resistant Slurry Pipeline Steel -- A Statistical Analysis of Process Abnormalities in Slab Casting -- Effect of Density Difference on Particle Segregation Behaviors at Bell-less Top Blast Furnace with Parallel-type Hopper -- The Effect of Austenitizing Temperature on Hardenability, Precipitation and Mechanical Properties of Boron Bearing Cr-Mo Alloy Steel -- Part 8. …”
Full-text access

7th International Symposium on High-Temperature Metallurgical Processing

Table of Contents: “…Flash Reduction of Magnetite and Hematite Concentrates with Hydrogen in a Lab-Scale Reactor for a Novel Ironmaking Process -- Investigation of Coal Tar Pitch Binder for the Production of Formed Coal Briquettes for COREX from High Volatile Coal Powder -- Upgrading of Iron-Rich Titanium Minerals Using a Molten Salt Process -- Direct Electrolytic Production of Mo-Si-Ti-C Composites from Their Oxides/Sulfide/Carbon Mixture Precursor in Molten Salt -- Reduction Kinetics of Magnetite Concentrate Particles with H2 + CO at 1200 to 1600 °C Relevant to a Novel Ironmaking Process -- Advanced Oxygen Lances for Safer Furnace Tapping Operations -- Utilization of Pine Nut Shell for Preparation of High Surface Area Activated Carbon by Microwave Heating and KOH Activation -- Research on High Temperature Mechanical Properties of 50Cr5MoV Roll Steel -- Separation of Rhenium and Molybdenum from Molybdenite Concentrate by Microwave-Assisted Roasting -- Active Oxidation and Fume Formation from Liquid SiMn -- Research on Enrichment of MFe and RO Phase from Converter Steel Slag by Super Gravity -- Volatilization of Rhenium from Molybdenite Concentrate by Oxidative Roasting -- Kinetic Investigation of the Electric Furnace Copper Slag Treatment -- The Extraction of Zinc from Willemite by Calcified-Roasting and Ammonia-Leaching Process Based on Phase Reconstruction -- An Investigation on Antimony Production by Using Niederschlag Process -- Oxygen-Rich Side Blow Bath Smelting Technology - New Developments in China -- Carbon Refractories in an Oxidizing Process? …”
Full-text access

Extraction 2018 Proceedings of the First Global Conference on Extractive Metallurgy /

Table of Contents: “…Pyrometallurgy Keynotes -- Role of Research in Non-ferrous Metallurgy Development - Peter Hayes Contributions To Modern Pyrometallurgy -- The Role of Research in Pyrometallurgy Technology Development - From Fundamentals to Process Improvements - Future Opportunities -- Sulfide Smelting: Thirty-Five Years of Continuous Efforts to Find New Value Adding Solutions -- The Changing World of Metallurgy Education -- Part 2. 7th International Symposium on Advances in Sulfide Smelting -- Sulfide Smelting Development in Japan during the Past Half Century -- Review of Boliden Harjavalta Nickel Smelter -- Redesign and Rebuild of the Pan Pacific Copper Flash Smelting Furnace -- From Fundamentals to Furnace Control - Making the Most of Modern Technologies -- Pyrometallurgical Processing of Desulphurization Slags -- High Temperature Phase Formation at the Slag/Refractory Interphase at Ferronickel Production -- ISASMELT™ Technology for Sulfide Smelting -- Refractory Design and the Role of Numerical Simulations -- Wear Phenomena in Non-ferrous Metal Furnaces -- A Scientific Roadmap for Refractory Corrosion Testwork -- Investigation of Refractory Failure in a Nickel Smelting Furnace -- Mathematical Modeling of Waterless Matte Granulator for Debottlenecking of Conventional Sulfide Smelters -- Desulfurization of the Non-Ferrous Smelter Flue Gases Based on Scrubbing with a Carbonate Eutectic Melt and Natural Gas Regeneration -- Advanced Thermochemical Fundamental and Applied Research to Improve Integrity of the Steel Water Jacketed Furnace at Port Pirie -- Sustainable Development Considerations in Primary Copper Smelting -- Influence of Arsenic on the Chemical Wear of Magnesia-chromite Refractories in Copper Smelting Furnaces -- Improved Copper Smelter and Converter Productivity through the Use of a Novel High-grade Feed -- Semi-discrete Dynamics and Simulation of Peirce-Smith Converting -- Development of Continuous Radar Level Measurement for Improved Furnace Feed Control -- Research on Recovery of Valuable Metals in Waste Acid from Copper Smelting Flue Gas Acid-making and Reduction and Harmless Treatment of Solid Wastes -- Fundamental Process Equilibria of Base and Trace Elements in the DON Smelting of Various Nickel Concentrates -- Challenges and Opportunities of a Lead Smelting Process for Complex Feed Mixture -- Application of MPE model to Nickel Smelting -- Practice on Exploration of Oxygen-enriched Converting Industrial Production by Kaldo furnace -- Ust-Kamenogorsk Metallurgical Complex : A Silent Achiever -- Trace Metal Distributions in Nickel Slag Cleaning Furnace -- Case Study on the Application of Research to Operations - Calcium Ferrite Slags -- Kinetics of Oxidation of Pyrrhotite -- Formation Mechanism of Ferronickel Alloy due to the Reaction Between Iron and Nickeliferous Pyrrhotite at 850-900 °C -- Two-step Copper Smelting Process at Dongying Fangyuan -- ISASMELT™ - Flexibility in Furnace Design -- Investigation of Oxygen Bottom Blown Copper Smelting Process -- Top SubmergedLance Furnace Lining Cooling System Upgrade -- Application Study on the Technology of Reducing Cu in Discarded Slag -- Thermodynamic Consideration of Copper Matte Smelting Conditions with Respect to Minor Element Removal and Slag Valorization Options -- Optimizing Smelter Uptime through Digital Asset Management -- Reducing Refining Cycle Times to Extend Anode Furnace Campaign Life at Kennecott Copper -- Smelting Mechanism in the Reaction Shaft of a Commercial Copper Flash Furnace -- Progressing Towards Furnace Modernization by Utilizing Comparative Analysis of Acousto Ultrasonic-Echo (AU-E) Monitoring: Case Studies -- Kinetics of Roasting of a Sphalerite Concentrate -- Thermodynamic Modeling of Oxygen Bottom-Blowing Continuous Converting Process -- Thermodynamic Considerations of Copper Complex Resources Smelting Process -- Part 3 -- Peter Hayes Symposium on Pyrometallurgical Processing -- Peter Charles Hayes' Contributions to Metallurgical Research: Brief Biography and List of Publications -- Integrated Pyrorefining of Lead at Teck's Trail Operations -- Relating Reported Carbon Dioxide Emissions to Iron and Steelmaking Process Details -- Process Zones Observed in a 48 MVA Submerged Arc Furnace Producing Silicomanganese According to the Ore-based Process -- Heat Transfer to Copper Coolers in Freeze Lined Furnaces: The Role of Radiation and the Influence of Slag Liquidus -- Interfacial Reaction between Magnesia Refractory and EAF Slag -- Kinetics of Dephosphorisation of Iron Carbon Alloys; the Importance of Competing Reactions, Slag Properties and CO Bubbles -- A Study of Cementite Formation in the Reduction of Hematite by CO-CO2 Gas Mixture Using High Temperature XRD -- Condensation of SiO and CO in Silicon Production - A Literature Review -- Phase Transformations from Quartz to Cristobalite -- Forming Micro-bubbles in Liquid Steel -- Innovative Applications of Bubbles and Drops to Ferrous Process Technology -- Carbochlorination of Low-grade Titanium Slag to Titanium Tetrachloride inMolten Salt -- Calciothermic Reduction and Electrolysis of Sulfides in CaCl2 Melt -- Reaction Behavior of Phosphorus in Multi-phase CaO-FeOX-SiO2-P2O5 Flux System -- Microanalysis and Experimental Techniques for the Determination of Multicomponent Phase Equilibria for Non-ferrous Smelting and Recycling Systems -- Thermodynamic Study on the Equilibrium of Platinum Group Metals between Slag and Molten Metals -- High Temperature Recovery of Rare Earth Ortho-Ferrites from Permanent Magnets -- On the Evaporation of S from Liquid Fe-C-S Alloy -- Extraction of Pig Iron and Ferrosilicon from Low-grade Bauxite Ores -- Kinetics of Bauxite Residue Sintering -- Multicomponent Thermodynamic Databases for Complex Pyrometallurgical Processes -- Verification of Permeability and Forchheimer Drag Coefficients of Al2O3 Ceramic Foam Filters (CFF) at High and Low Flow Rates -- Computational Modeling of a Secondary Lead Reverberatory Furnace: Effect of Burden Geometry -- Development ofa Thermodynamic Database for the Multicomponent PbO-"Cu2O"-FeO-Fe2O3-ZnO-CaO-SiO2 System for Pyrometallurgical Smelting and Recycling -- Reduction in GHG Emissions of Steel Production by Direct Injection of Renewable Biocarbon -- Preparation of Ferronickel from Nickel Laterite Ore via Semi-molten Reduction Followed by Magnetic Separation -- Thermodynamic Modeling of the Solid State Carbothermic Reduction of Chromite Ore -- Production of Ferromanganese Alloys from Silicomanganese Sludge and an Iron Source -- New Paradigms for Iron Ore Pelletization -- The In Situ Micro Raman Study of the NO3- Electrochemical Behavior in Molten NaNO3-KNO3 Mixtures -- Influence of Manganese on Dissolution of Graphite in Manganese Iron Alloys -- Experimental Investigation of Pyrometallurgical Treatment of Zinc Residue -- Dynamic modelling of molten slag-matte interactions in an industrial flash smelting furnace settler -- High Temperature Characteristics of Slags Originating from the Production of Synthetic Tantalum Concentrate -- Recovery of Nickel and Vanadium from Heavy Oil Residues using DC Plasma Smelting -- Iron Segregation Roasting Processes -- Towards a Microwave Metal Extraction Process -- The Influence of Aluminum on Indium and Tin Behavior in Secondary Copper Smelting -- Behavior of Nickel as a Trace Element and Time-dependent Formation of Spinels in WEEE Smelting -- The Distribution of Sn between CaO-CuOx- FeOy-SiO2 Slag and Copper Metal at 1300 \\176 C -- Gaseous Reduction of Mn ores in CO-CO2 atmosphere -- Optimization of Slag Composition in View of Iron Recovery and Dephosphorization in EAF Process -- A New Pyrometallurgical Recycling Technique for Lead Battery Paste without SO2 Generation - A Thermodynamic and Experimental Investigation -- Understanding Viscosity-structure Relationship of Slags and its Influence on Metallurgical Processes -- Reduction of Manganese Ore Pellets in a Methane-containing Atmosphere -- Kinetics of Reduction-carburization of Synthetic (Fe,Mg)(Cr,Al2O4 Solid Solutions by Ar-CH4-H2 Gas Mixtures -- Chemical Reactivity and Thermal Stability of the Phosphate Binder used in Ceramic Foam Filters (CFFs) -- Part 4. …”
Full-text access

Applications of Process Engineering Principles in Materials Processing, Energy and Environmental Technologies An EPD Symposium in Honor of Professor Ramana G. Reddy /

Table of Contents: “…Part 1: Plenary Session -- Applications of Process Engineering Principles in Materials Processing, Energy and Environmental Technologies-Contributions of Professor Ramana Reddy -- Status of the Development of a Novel Flash Ironmaking Technology -- Innovations and Insights in Fluid Flow and Slime Adhesion for Improved Copper Electrorefining -- Molten Flux Design for Solid Oxide Membrane-Based Electrolysis of Aluminum from Alumina -- Effect of Slag Phase on Mixing and Mass Transfer in a Model Creusot Loire Uddeholm (CLU) Converter -- Part 2: Electrometallurgy -- Modeling of Aluminum Electrowinning in Ionic Liquid Electrolytes -- Electrochemical Processing of Rare Earth Alloys -- Effect of Cobalt Concentration on the Potential for Oxygen Evolution from Pb-Ca-Sn Anodes in Synthetic Copper Electrowinning Electrolytes -- Cobalt electrodeposition from cobalt chloride using urea and choline chloride ionic liquid: Effect of temperature, applied Voltage, and cobalt chloride concentration on current efficiency and energy consumption -- METTOP-BRX Technology - Eliminating Concerns and Highlighting Potentials of the Concept of Tankhouse Optimization -- Mathematical Modeling of Molten Salt Electrolytic Cells for Sodium and Lithium Production -- Part 3: Hydrometallurgy -- P-CAC, A Unique Separation Technology for PGM Recovery -- The Physical Characteristics of Electrorefined Copper Starter Sheet Material -- Extraction of Copper from Sulfate-Chloride Solutions by Using Hydroxyoxime Extractants -- Hydrometallurgical Processes for the Recovery of Rare Earths, Nickel and Cobalt in Chloride Medium -- A Cr6+-Free Extraction of Chromium Oxide from Chromite Ores using Carbothermic Reduction in the Presence of Alkali -- Part 4: Pyrometallurgy I -- Market Dynamics, Recycling and Recovery of Magnesium and Its Alloy from Scrap -- Alternative ways of Using Nonferrous Slags as Feed Material in the Ferrous Production Industry -- Insulating or Conductive Refractory Lining Designs for Electric Furnace Smelting? …”
Full-text access

Energy Technology 2019 Carbon Dioxide Management and Other Technologies /

Table of Contents: “…Energy Technologies and CO2 Management Symposium -- Gas Hydrate-based CO2 Separation Process: Quantitative Assessment of the Effectiveness of Various Chemical Additives Involved in the Process -- Tar Removal from Hot Coke Oven Gas for H2 Amplification with In Situ CO2 Capture -- An Evaluation Method for Material and Energy Conversion Effect with Steel Manufacturing Process Data -- Preparation and Characterization of Activated Carbon from Waste Ion-exchange Resin for CO2 Adsorption -- Evaluation of Variation in the Life Cycle Based Environmental Impacts for Copper Concentrate Production -- Direct Reduction of Copper Slag Composite Pellets within Lignite Using Biomass as Binder -- Thermodynamic Analysis of Incineration Treatment of Waste Disposable Syringes in an EAF Steel-making Process -- The Reduction Kinetic of the Combined Cu-based Oxygen Carrier Used for Chemical Looping Gasification Technology -- Synergistic Effect Between Fat Coal and Poplar During Co-pyrolysis with Thermal Behavior and ATR-FTIR Analysis -- Flow Characteristic of Two-phase Bubble Reactor for Slag Waste Heat Recovery -- Improving Energy Efficiency in Direct Method for Continuous Casting of Lead Sheets -- Research on High Efficiency Energy Conversion Technology for Modern Hot Blast Stove -- An Exergy Study of Cowper Stove Operations with an Iron Blast Furnace -- Waste Heat Recovery from Aluminum Production -- Leaching and Carbonation of Electric Arc Furnace(EAF) Slag under a Microwave Field for Mineral Carbonation -- A Novel Preparation of Bi2O3 and Their Potent Photocatalytic Activity under Visible-light Irradiation -- Energy Conservation in Sintering Ignition Process Based on Comprehensive Ignition Intensity -- Part 2. …”
Full-text access

Energy Technology 2017 Carbon Dioxide Management and Other Technologies /

Table of Contents: “…Part 1: Energy Technologies: Energy Technologies -- Continuous optimization of the energy input - The success story of AOS -- Part 2: Energy Technologies: CO2 Management and Sustainable Metallurgical Processes -- Transforming the way electricity is consumed during the aluminium smelting process -- The thermodynamics of slag forming inorganic phases in biomass combustion processes -- Leaching of Sb from TROF furnace Doré Slag -- Potential CO2 emission reduction and H2 production using industrial slag wastes originating from different industrial sectors -- Part 3: Energy Technologies: Novel Technologies -- Modeling Anthropogenic Heat Flux in Climate Models -- In-situ microscopic study of morphology changes in natural hematite and Cu-spinel particles during cyclic redox gas exposures for chemical looping applications -- Thermodynamic stability of condensed phases in the ternary system CaO-Cu-O by the EMF method -- Experimental Study on Electro-spraying of Ethanol Based on PDA Measurement -- Part 4: Energy Technologies: Heat Recovery -- Integrated utilization of sewage sludge and coal gangue in clinker manufacture -- Valuable metals and energy recovery from electronic waste streams -- Dry Granulation of Hot Metal and Heat Recovery from Off-Gas -- Energy Recovery of Livestock Waste in Taiwan -- Life cycle assessments of incineration treatment for sharp medical waste -- Part 5: Energy Technologies: Poster Session -- Effect of granularity on pretreatment of coke with microwave irradiation -- Effect of Microwave and ultrasonic coupling treatment on granularity and microstructure of Pulverized Coal -- Influence of Sodium on Coke Microstructure in Different Reaction Atmosphere -- Part 6: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste I -- Maximizing the values of steelmaking slags -- Recycling of zinc from the steelmaking dust in the sintering process -- Direct Preparation of Metal Doping Ni-Zn Ferrite from Zn-containing Electric Arc Furnace Dust by Calcination Method -- Part 7: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste II -- Synthesis and Characterization of Ferrochromium Slag Based Glass-ceramics -- Hydrometallurgical processing of copper smelter dust for copper recovery as nanoparticles: a review -- Part 8: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste III -- Chromium removal from iron-rich waste generated during processing lateritic nickel ores -- Removal of Magnesium from Liquor Produced by Nickel Mining by Crystallization -- Synthesis of Magnesium Oxide from Ferronickel Smelting Slag through Hydrochloric Acid Leaching-Precipitation and Calcination -- Thermodynamic analysis of the recycling of aircraft Al alloys -- Lithium-ion Battery Recycling Through Secondary Aluminum Production -- Part 9: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Poster Session -- Alternative method for materials separa-tion from crystalline silicon photovoltaic modules -- Bioleaching process for metal recovery from waste materials -- Chemical Analysis of Sludge Originating from Industrial Painting Performed in Brazil -- Preparing ferrosilicon alloy with copper slag -- Research on Optimization of Sintering Mixture with Low-grade Complex Ore -- Part 10: Solar Cell Silicon: Silicon Production, Crystallization, and Properties -- Study on Producing Solar Grade Silicon by Carbothermal Reduction of Andalusite Ore -- Phase Analysis of the Si-O2 System -- Characterization of Composition, Morphology, and Structure of Disi Raw Sandstones in Jordan -- Part 11: Solar Cell Silicon: Silicon Impurity Removal and Refining -- Effect of magnesium addition on removal of impurities from silicon by hydrometallurgical treatment -- Evaporation removal of boron in molten silicon using reactive fluxes -- Part 12: Solar Cell Silicon: Silicon Photovoltaics -- Electrodynamic Eddy Current Separation of End-of-Life PV Materials -- Investigation on Quartz Crucibles for Monocrystalline Silicon Ingots for Solar Cells -- Influence of Oxygen Content on the Wettability of Silicon on Graphite -- Particle Separation in Silicon Ingot Casting Using AC Magnetic Field -- Part 13: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Advances in Environmental Technologies: Characterization and Uncertainty -- Characteristics of Municipal Solid Waste Incineration Bottom Ash with Particulate Matters PM2.5 ~PM10 -- Part 14: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: New Areas of Value Recovery -- Accelerating life-cycle management protocols for new generation batteries -- Recovery of Metals and Nonmetals from Waste Printed Circuit Boards (PCBs) by Physical Recycling Techniques -- The use of rice husk ash as an aggregate for foundry sand mould production -- Part 15: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Poster Session -- Chemical reduction of Fe(III) in nickel lateritic wastewater to recover metals by ion exchange -- Chronopotentiometry applied to the determination of copper transport properties through a cation-exchange membrane -- Effect of flow rate on metals adsorption of synthetic solution using chelating resin Dowex XUS43605 in column experiments.…”
Full-text access

Energy Technology 2018 Carbon Dioxide Management and Other Technologies /

Table of Contents: “…Energy Technologies and CO2 Management Symposium -- Gas Hydrate-based CO2 Separation Process: Quantitative Assessment of the Effectiveness of Various Chemical Additives Involved in the Process -- Tar Removal from Hot Coke Oven Gas for H2 Amplification with In Situ CO2 Capture -- An Evaluation Method for Material and Energy Conversion Effect with Steel Manufacturing Process Data -- Preparation and Characterization of Activated Carbon from Waste Ion-exchange Resin for CO2 Adsorption -- Evaluation of Variation in the Life Cycle Based Environmental Impacts for Copper Concentrate Production -- Direct Reduction of Copper Slag Composite Pellets within Lignite Using Biomass as Binder -- Thermodynamic Analysis of Incineration Treatment of Waste Disposable Syringes in an EAF Steel-making Process -- The Reduction Kinetic of the Combined Cu-based Oxygen Carrier Used for Chemical Looping Gasification Technology -- Synergistic Effect Between Fat Coal and Poplar During Co-pyrolysis with Thermal Behavior and ATR-FTIR Analysis -- Flow Characteristic of Two-phase Bubble Reactor for Slag Waste Heat Recovery -- Improving Energy Efficiency in Direct Method for Continuous Casting of Lead Sheets -- Research on High Efficiency Energy Conversion Technology for Modern Hot Blast Stove -- An Exergy Study of Cowper Stove Operations with an Iron Blast Furnace -- Waste Heat Recovery from Aluminum Production -- Leaching and Carbonation of Electric Arc Furnace(EAF) Slag under a Microwave Field for Mineral Carbonation -- A Novel Preparation of Bi2O3 and Their Potent Photocatalytic Activity under Visible-light Irradiation -- Energy Conservation in Sintering Ignition Process Based on Comprehensive Ignition Intensity -- Part 2. …”
Full-text access

Concrete Durability Cementitious Materials and Reinforced Concrete Properties, Behavior and Corrosion Resistance /

Full-text access

Rare Metal Technology 2017

Table of Contents: “…Part 1: Rare Earth Elements I -- The Economics of the Search Minerals Direct Extraction Process for Rare Earth Recovery -- Recovery of Critical Rare Earth Elements for Green Energy Technologies -- Selective Reduction and Separation of Europium from Mixed Rare-Earth Oxides from Waste Fluorescent Lamp Phosphors -- Application of Rare Earths for Higher Efficiencies in Energy Conversion -- Microwave Treatment for Extraction of Rare Earth Elements from Phosphogypsum -- Selective Separation of Rare Earth Elements Utilizing Vapor Phase Extraction -- Observation of Oxidation of Nd-Magnet In High Temperature Recycling/Recovery Process -- Part 2: Rare Earth Elements II and Platinum Group Metals -- Electrochemical Behavior of Neodymium in Molten Chloride Salts -- Novel Reactive Anode for Electrochemical Extraction of Rare Earth Metals from Rare Earth Oxides -- Electrochemical Formation of Nd Alloys Using Liquid Metal Electrodes in Molten LiCl-KCl Systems -- Challenges in the Electrolytic Refining of Silver -Influencing the Co-Deposition through Parameter Control -- Vapor Treatment for Alloying and Magnetizing Platinum Group Metals -- Biotechnological Recovery of Platinum Group Metals from Leachates of Spent Automotive Catalysts -- Recovering Palladium from Chloridizing Leaching Solution of Spent Pd/Al2O3Catalyst by Sulfide Precipitation -- Mechanism of Intensifying Cyanide Leaching of Gold from a Calcine by the Pretreatment of Acid or Alkali Washing -- Part 3: Base and Rare Metals -- Disclosure of the Kinetic Relations of Semidirect Cemented Carbide Leaching in Acid Media -- A New Two-Stage Process for Preparation of Ti/Ti-Al Alloys -- Study on Pre-Reduction Mechanisms of Chromium Ore Pellets in SRC Process -- Recovery of Valuable Metals from High-Content Arsenic Containing Copper Smelting Dust -- Sulfuric Acid Leaching of Mechanically Activated Vanadium-Bearing Converter Slag -- Present Status and Development of Comprehensive Utilization of Vanadium-Titanium Magnetite -- Review of TiO2-Rich Materials Preparation for the Chlorination Process -- Part 4: Poster Session -- Adsorbents for Selective Recovery of Heavy Rare Earth Elements -- Behavior of Sec-Octylphenoxy Acetic Acid (CA-12) in Yttrium Recovery from High Concentrated Heavy Rare Earths Mixture -- Preparation of Molybdenum Powder from Molybdenite Concentrate Through Vacuum Decomposition-Acid Leaching Combination Process -- Pressure Leaching Behavior of Molybdenum-Nickel Sulfide from Black Shale -- Selective Recovery of Scandium from Sulfating Roasting Red Mud by Water Leaching -- Study for Preparation of Industrial Ammonium Molybdate from Low Grade Molybdenum Concentrate -- Study of a Synergistic Solvent Extracting System to Separate Yttrium and Heavy Rare Earths: A Deep Investigations on System Behavior -- The Recovery of Bismuth from Bismuthinite Concentrate Through Membrane Electrolysis.…”
Full-text access

Proceedings of the 3rd Pan American Materials Congress

Table of Contents: “…Part 1: Pan American Materials Congress: Advanced Biomaterials -- Analysis of Biomimetic Surgical Clip Using Finite Element Modeling for Geometry Improvement and Biomaterials Selection -- Chemical composition effect of sol-gel derived bioactive glass over bioactivity behavior -- Effects of Dialium guineense based zinc nanoparticle material on the inhibition of microbes inducing microbiologically influenced corrosion -- Injectability evaluation of bone-graft substitutes based on carrageenan and hydroxyapatite nanorods -- Synthesis and characterization of Ni0.5Zn0.5Fe2O4@mSiO2 core shell nanocarrier for drug delivery applications -- Part 2: Pan American Materials Congress: Advanced Manufacturing -- Carbon Based Coatings Deposited On Nitrided Stainless Steel: Study Of Thermal Degradation -- Comparative Mechanical Analysis Between Epoxy Composite Reinforced With Random Short Cuarua Fibers And Aligned Long Curaua Fibers -- Effect of Tool Rotation on Tool Wear Phenomenon in Rotary Tool micro-USM -- Numerical Modeling of High-Velocity Impact Welding -- Selective Laser Sintering of Polyamide/Hydroxyapatite Scaffolds -- Part 3: Pan American Materials Congress: Materials for Green Energy -- A comparison between recycled spent zeolite and calcite limestone for manganese removal -- Effect of Mo6+ Substitution on Microstructure and Lithium Ionic Conductivity of Garnet-Type Li7La3Zr2O12 Solid Electrolytes by Field Assisted Sintering Technology -- Electromagnetic Levitation Refining Of Silicon-iron Alloys for Generation of Solar Grade Silicon -- Green Extract of Mate Tea as Corrosion Inhibitor of Copper and Aluminum -- Platinum Salts Synthesis as Precursors to Get Heterogeneous Catalysts for Biofuels Production -- Technical and Environmental Assessment of an Alternative Binder for Low Traffic Roads with LCA Methodology -- Part 4: Pan American Materials Congress: Materials for Infrastructure -- Anticorrosion and Adsorption Mechanism of Rhizophora mangle L Leaf-extract on Steel-reinforcement in 3.5% NaCl-immersed Concrete -- Cassia fistula leaf-extract Effect on Corrosion-inhibition of Stainless-steel in 0.5 M HCl -- Effect of C5H11NO2S on Reinforcing-steel Corrosion in Concrete Immersed in Industrial/Microbial Simulating-environment -- FIBER REINFORCED CONCRETE MANUFACTURED WITH ELECTRIC ARC FURNACE SLAG -- Jigs, hydro-cyclones and sensor-based sorting to value recycled aggregates -- Performance of hydraulic mixes manufactured with electric arc furnace slag aggregates -- POROUS ASPHALT MIXTURES WITH 100% SIDERURGIC AGGREGATES -- Part 5: Pan American Materials Congress: Materials for Oil and Gas Industry -- Blends of PVDF with its processing waste: Study of the mechanical properties of the blends thermally aged -- DYNAMIC TRANSFORMATION AND RETRANSFORMATION DURING THE SIMULATED PLATE ROLLING OF AN X70 PIPELINE STEEL -- Effect of Heat Input on the microstructure and toughness of welded API pipelines -- EVALUATION OF NON-DESTRUCTIVE TECHNIQUES (THERMOGRAPHY, ULTRASOUND AND EDDY CURRENT) FOR DETECTION OF FAILURES IN METALLIC SUBSTRATES WITH COMPOSITE ANTICORROSIVE COATINGS -- Structural Integrity of Pipelines -- Part 6: Pan American Materials Congress: Materials for Transportation and Lightweighting -- ADVANTAGES OF HOT COMPRESSION IN THE MANUFACTURE OF AlB4C COMPOSITES -- An Improved Silicon Carbide Monofilament for the Reinforcement of Metal Matrix Composites -- Analysis of coir fiber porosity -- BALLISTIC PERFORMANCE IN MULTILAYER ARMOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS -- Curaua non-woven fabric composite for ceramic multilayered armors: A lightweight, natural, and low cost alternative for KevlarTM -- Effect of Forging on Microstructure, Texture and Compression Behaviour of Extruded AZ31B -- EFFECTS OF HYPOEUTECTIC Sc ADDITIONS TO Al-4.5 wt% Cu UNDER DIFFERENT COOLING RATES -- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH FIQUE FABRIC -- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH JUTE FABRIC -- Microstructure and Hardness of Subzero Quenched and Heat Treated Ti-6Al-4V Alloy -- Nano-Additive Reinforcement of Thermoplastic Microballoon Epoxy Syntactic Foams -- Nanocomposites Mechanical and Tribological Properties using Graphene Coated Ceramic Nanoparticles for Light Weight Applications -- Synthesis of Energetic Composites in Ti-Al-B-C System by Adiabatic Explosive Compaction -- Tensile and impact properties of two fiber configurations for curaua reinforced composites -- Thermo\\8722;Mechanical behavior of nanostructure polyacrylic polymer based on Al2 O3 and bentonite nanoparticles -- Thermo\\8722;mechanical properties of waterborne acrylate hybrid nanocomposites -- Thermo-mechanical properties of copolymer/clay nanocomposites: A comparative study of production method by in-situ and solution mixture -- Part 7: Pan American Materials Congress: Minerals Extraction and Processing -- Biotechnological recycling of precious metals sourced from post-consumer products -- Biotechnologies for water recycling in the mineral industry -- Dissolution thermodynamics of smithsonite in alkaline iminodiacetate aqueous solution -- Effect of ethylenediamine on smithsonite flotation -- Extraction of Gold from sands and Slimes Tailings Dump from Mazowe Mine, Zimbabwe -- Gold Recovery from Waste Solutions of PCB Gold Plating Process using Hydro Cyclone Reactor for Demonstration Study -- Improving Quality of Coke Made from Chinese Xinjiang Gas Coal with High Strength Modifier -- INVESTIGATING THE DISSOLUTION CHARACTERISTICS OF STRONTIUM SULFIDE -- Kinetic study on the leaching of vanadium-bearing converter slag with dilute sulfuric acid -- Leaching of Spent Ni-Mo Hydrodesulphurization (HDS) Catalyst in Oxalic Acid Solutions -- Novel Adsorbent from Iron Ore Concentration Tailings for Toxic Cationic Dye Removal from Water -- Preliminary analysis of the application of sensor based sorting on a limestone mine in the region Caçapava do Sul, Brazil -- Preparation of high grade Industrial Copper Compound from a Nigerian Malachite mineral by Hydrometallurgical process -- PROCESS OF IMPROVING THE FLOTATION USING ULTRASONIC BOMBARDMENT -- Production of strontianite from celestite ore in carbonate media -- Reduction Kinetics and Characterization Study of Synthetic Magnetite Micro Fines -- Study on Leaching Valuable Elements from Bayan Obo Tailings -- Study on thermal decomposition and oxidation characteristics of iron ores -- The direct leaching of micro-disseminated gold concentrate by bromide process and the characterization of leaching products -- Working Experience with the new WOX Plant to treat zinc waelzoxide at ZGH Boleslaw SA, Poland -- Part 8: Pan American Materials Congress: Nanocrystalline and Ultra-fine Grain Materials and Bulk Metallic Glasses -- Continuous dynamic recovery in pure aluminum deformed to high strain by accumulative press bonding -- Effects of Natural Aging and Post-processed Heat Treatment on the Microstructure and Mechanical Properties of Friction Stir Processed Al-7B04 -- Evaluation of the hardening and softening effects in Zn-21Al-2Cu with as cast and homogenized microstructure processed by equal channel angular pressing -- Part 9: Pan American Materials Congress: Steels -- Effect of titanium sulfide precipitates on grain size in low carbon steel -- Evolution of Austenite Dislocation Density during Hot Deformation using a Physical Dynamic Recrystallization Model -- Influence of a Rapid Heating on the Microstructure and Properties of Press-Hardening Steel Sheets -- Jansto:New Generation Niobium Bearing Structural Steels for Future Infrastructure Demands -- Kinetic study of the austenite decomposition during continuous cooling in a welding steel -- Microstructural Evolution in Microalloyed Steels during Thermomechanical Rod Rolling -- MODELING OF METAL-SLAG MASS AND MOMENTUM EXCHANGES IN GAS-STIRRED LADLES -- Study on adjustment and optimization of LF refining slag of spring steel 55SiCrA -- Tempering Response of Bainitic and Martensitic Microstructures -- The research on the relationship between gas movement behaviors and circulating flow of the molten steel in RH.…”
Full-text access

Light Metals 2017

Table of Contents: “…Part 1: Alumina & Bauxite: Digestion and Calcination -- CFB Alumina Calciners - New and Future Generation Opportunities for Green Field Refineries -- Evolutional Development of Alkaline Aluminosilicates Processing Technology -- Characterization and Ore Dressing of Bauxite from Brazil -- Process Optimization for Diaspore Digestion Equilibrium using Response Surface Methodology -- Thermodynamic analysis and formation law of Q phase of calcium aluminate clinker -- Leaching Behavior of Alumina from Smelting Reduction Calcium Aluminate Slag with Sodium Carbonate Solution -- Part 2: Alumina & Bauxite: Bauxite Residues Technology -- Security Disposal and Comprehensive Utilization of Bauxite Residues -- Bauxite Residue Amendment Through the Addition of Ca and OR Mg Followed By Carbonation -- Application of Tricalcium Aluminate Instead of Lime for the recovery of aluminum in Middle-low Grade Bauxite in Calcification-Carbonization Process -- Low Temperature Reduction of Hematite in Red-Mud to Magnetite -- Recovery of Iron-, Titanium-bearing Constituents from Bauxite Ore Residue via Magnetic Separation Followed by Sulfuric Acid Leaching -- Processing diasporic red mud by the calcification-carbonation method -- Research of Flocculants and Dewatering Additives for Filtration of Red Mud -- Characterization of activated alumina production via spray pyrolysis -- Part 3: Alumina & Bauxite: Non-traditional Resources -- New process research on aluminium production from non-traditional aluminum resource by microwave chlorination -- Opportunities of pseudoboehmite processing from aluminum content raw material at sintering method -- Chemical Alumina Preparation by Using High Alumina Content Fly Ash -- A Novel Process of Alumina Production from Low-grade Bauxite Containing Sulfur -- Iron separation from bauxite through smelting-reduction process -- Thermodynamic behavior of lime desulfurization in sodium aluminate solution -- Part 4: Alumina & Bauxite: Poster Session -- A study on optimization ofprocessing parameters for synthesis of calcium hydroaluminosulfate using response surface methodology -- Part 5: Aluminum Alloys, Processing and Characterization: Alloy Development and Applications -- Design of New 6xxx Series Al Alloy Using the CALPHAD Thermodynamic Database -- Study of an Al-Ca Alloy with Low Young's Modulus -- Production Of 3004 Aluminum Alloy Sheet For Structural Applications From Twin Roll Casting -- Aluminum alloys with tailored TiB2 particles for composite applications -- Development of low expansion and high strength aluminium hybrid composite -- Part 6: Aluminum Alloys, Processing and Characterization: Solidification and Casting -- A model for a-Al(Mn,Fe)Si crystals -- Casting Characteristics of High Cerium Content Aluminum Alloys -- In-situ observation of fragmentation of primary crystals by ultrasonic cavitation in water -- The enhancement of mechanical properties of A356 alloy solidified at lower cooling rate via effectively grain refinement -- Secondary Aluminum Alloys Processed by Semisolid Process for Automotive Application -- Integrated casting-extrusion of an AA6082 aluminum alloy -- On Porosity Formation in Al-Si-Cu Cast Alloys -- Part 7: Aluminum Alloys, Processing and Characterization: Characterization -- Algorithm for Finding the Correlation between the Properties of Wrought Aluminum Alloys, the Chemical Composition and the Processing Parameters -- Analysis of an aluminium alloy containing trace elements -- Determination of aluminum oxide thickness on the annealed surface of 8000 series aluminum Foil by Fourier Transform Infrared Spectroscopy -- Test Uncertainty in Chemical Composition Analysis -- Real Time 3D Imaging and Laser Marking System for Industrial Traceability -- Production and Certification of Arconic Certified Reference Materials -- Characterization of Large Strain Extrusion Machining (LSEM) of AA7050 -- Interaction between fatigue micro-cracks and inclusion/matrix interface in high-strength Al alloy -- Influence of trace element additionson Fe bearing intermetallic solidification of a 6063 Al alloy -- Part 8: Aluminum Alloys, Processing and Characterization: Heat Treatment -- THE OPTIMIZATION OF THE HOMOGENIZATION TREATMENT OF AA7075 -- Precipitation modeling and validation of Al-5%Cu-0.4%Mn alloy using quench factor analysis -- Young's modulus of Al-Si-Mg-Cu based alloys under different heat treatment processes -- Intergranular Corrosion Investigation on EN-AW 6082 Redraw Rod -- The influence of process parameters and thermomechanical history on streaking defects in AA6060 extrusions -- Effect of Heat-treatment on Microstructure and Mechanical Properties of Sonicated Multicomponent AlMgSiCuZn Alloy -- Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys -- Part 9: Aluminum Alloys, Processing and Characterization: Plasticity and Mechanical Behavior -- New Yield Criterion for Description of Plastic Deformation of Face-Centered Cubic Single Crystals -- Quantifying As-cast and Homogenized AA7050 Mechanical Properties through Compression Testing -- Determining a Stable Texture Condition Under Complex Strain Path Deformations in Face Centered Cubic Metals -- Microstructural transition and elevated temperature tensile properties of modified Al-Si-Cu-Mg alloys -- Effects of alloying elements on anneal-hardening behavior of aluminum alloy foils -- Increasing strength and corrosion resistance of AlMgSi alloys by tailor-made thermomechanical processing -- Microstructural optimization of a High Mechanical Properties (HMP) aluminum alloy by using CobaPress™ process -- Cyclic Stress-strain Behavior and Low Cycle Fatigue Life of AA6061 Aluminum Alloy -- Part 10: Aluminum Alloys, Processing and Characterization: Poster Session -- Corrosion of Al-Mg Alloys in Ethanol -- Warm pressing of Al powders: an alternative consolidation approach -- Part 11: Aluminum Reduction Technology: Dry Scrubbing, Alumina Transport and Dissolution -- Spreading of Alumina and Raft Formation on the Surface of Molten Cryolite -- Fluoride Capture Capacity of SGA: The Interplay between Particle and Pore Size Distribution -- Predictive Formulae for the Competitive Adsorption of HF and SO2 on Smeltergrade Alumina Used in Dry Scrubbing Applications -- Pot Gas Treatment at High Gas Temperatures -- Influence of Handling Parameter on Powder Properties -- Part 12: Aluminum Reduction Technology: Anode Effect and PFC Emissions -- Preventive Treatment of Anode Effects Using On-Line Individual Anode Current Monitoring -- Reduction in EGA Jebel Ali Potroom GHG Emissions -- Partial Anode Effect in a Two-Compartment Laboratory Alumina Reduction Cell -- Co-evolution of Carbon Oxides and Fluorides during the Electrowinning of Aluminium with Molten NaF-AlF3-CaF2-Al2O3 Electrolytes -- Part 13: Aluminum Reduction Technology: Cell Lining Materials -- Chemical stability of thermal insulating materials in sodium vapour environment -- AGING OF INSULATING LININGS IN ALUMINIUM ELECTROLYSIS CELLS -- Cathode Wear Based on Autopsy of a Shut down Aluminium Electrolysis Cell -- SPL Recycling and Re-Processing -- Alternative applications of SPL: Testing ideas through experiments and mathematical modeling -- Part 14: Aluminum Reduction Technology: Cell Voltage and Pot Control -- Clustering Aluminium Reduction Cells -- Application of Multivariate Statistical Process Control with STARprobeTM Measurements in Aluminium Electrolysis Cells -- Study Of Impact Of The Anode Slots On The Voltage Fluctuations Of Aluminium Electrolysis Cell Using Bubble Layer Simulator -- Detecting, Identifying and Managing Systematic Potline Issues with Generation 3 Process Control -- Predicting Instability and Current Efficiency of Industrial Cells -- Part 14: Aluminum Reduction Technology: Electrolyte and Fundamentals -- Sodium in Aluminium as a Cell Performance Indicator: A Quantitative Framework -- Bauxite processing via chloride route to produce chloride products and subsequent electrolysis of aluminium chloride to produce aluminium metal -- Stability of Chlorides in Cryolitic Electrolyte -- Role of Heat Transfer in the Formation of Carbon Oxides in Smelting Cells -- Part 15: Aluminum Reduction Technology: Modelling and Cell Design -- Improving The Understanding Of BUSBAR Design And Cell MHD Performance -- LES turbulence modeling approach for molten aluminium and electrolyte flow in aluminum electrolysis cell -- MHD of Large Scale Liquid Metal Batteries -- Low energy consumption cell designs involving…”
Full-text access

Strain-Hardening Cement-Based Composites SHCC4 /

Table of Contents: “…Leung, Jinlong Pan -- Novel Experimental Method to Determine Crack-Bridging Constitutive Relationship of SHCC Using Digital Image Processing, by Jing Yu, Christopher K. …”
Full-text access