Arama Sonuçları - slag composition

Strain-Hardening Cement-Based Composites SHCC4 /

İçindekiler: “…Timothy, Tagir Iskhakov, Yijian Zhan, Günther Meschke -- Modelling and experimental characterization of the tensile response of Ultra-High Performance Fibre-Reinforced Cementitious Composites, by Amin Abrishambaf, Mário Pimentel, Sandra Nunes -- Mechanical properties of ductile cementitious composites incorporating microencapsulated phase change materials, by Erik Schlangen, Branko Savija, Stefan Chaves Figuieredo, Fernando Franca de Mendoca Filho, Mladena Lukovic -- A Comparative Study on Deflection-hardening Behavior of Ductile Alkali-activated Composite, by Shizhe Zhang, Marija Nedeljković, Bahman Ghiassi, Guang Ye -- Effectiveness of Fabricating High Performance Fiber Reinforced Cementitious Composite (HPFRCC) Using High Volume Steel Slag Powder, by Xuanchun Wie, Xinhua Cai, Peng Wu, Jun Su, Zhen He, Shengwen Tang -- Influence of Coarse Aggregate on the Mechanical Behavior of Strain Hardening Cementitious Composites, by Naoshi Ueda, Atsushi Kawamoto -- Development of a cementitious composites with tensile strain capacity up to 10%, by K.L. …”
Full-text access
OPAC'ta görüntüle

Extractive metallurgy of copper /

İçindekiler: “…Industrial single furnace direct-to-copper smelting. Chemistry. Effect of slag composition on % Cu-in-slag. Industrial details. …”
Full-text access
OPAC'ta görüntüle

9th International Symposium on High-Temperature Metallurgical Processing

İçindekiler: “…Poster Session I -- Controlled Synthesis of TiC Nanoparticles Using Solid Oxide Membrane Technology in Molten CaCl2 -- Effect of Chemical Components of Mould Flux on Dissolution Rate of Al2O3 into Molten Flux for High Manganese High Aluminum Steel -- Effect of Temperature on Oxidation Behavior of Cr-Mo-V Steel with Different Cr Contents for High-speed Train Brake Discs -- Electrochemical Preparation of Ti5Si3/TiC Composite from Titanium-rich Slag in Molten CaCl2 -- Evolution of Al-Ti-Mg-O Inclusions during Refining and Casting Process of Interstitial Free Steel -- Experimental Study on Carburization of Higher Vanadium-bearing Hot Metal -- Hematite Precipitation from High Iron Solution in Hydrometallurgy Process -- Influence On The Crystallization Phase Of Mold Flux By Magnetic Fields -- Kinetics Study on Limestone Decomposition in Early Converter Slag -- Mathematical Modeling and Analysis of Converter Slagging and Steelmaking Process by Replacing Part of Lime With Limestone -- Research of Digital Platform and Process Guidance Model in EAF Steelmaking Process -- Research on Factors Affecting and Prediction Model of Silicon Content in Hot Metal of Corex -- Studied on the Cooling Effect of CO2 on the Temperature of Vanadium in Converter -- Study on Grain Size and Porosity of the Produced Lime from Limestone in Early Converter Slag -- Study on Reducing Al2O3 Inclusions by Optimizing Refining Slag -- Study on the Volatilization of Sb2S3 in Vacuum -- The Effects of ZrO2, Y2O3 and Sc2O3 on the Properties of Mould Fluxes for High Manganese High Aluminum Steels -- Thermogravimetric Analysis and Kinetic Study of the Calcification Roasting of Vanadium Slag -- Viscosity of Mould Flux under Electromagnetic Field -- Part 10. …”
Full-text access
OPAC'ta görüntüle

10th International Symposium on High-Temperature Metallurgical Processing

İçindekiler: “…Poster Session I -- Controlled Synthesis of TiC Nanoparticles Using Solid Oxide Membrane Technology in Molten CaCl2 -- Effect of Chemical Components of Mould Flux on Dissolution Rate of Al2O3 into Molten Flux for High Manganese High Aluminum Steel -- Effect of Temperature on Oxidation Behavior of Cr-Mo-V Steel with Different Cr Contents for High-speed Train Brake Discs -- Electrochemical Preparation of Ti5Si3/TiC Composite from Titanium-rich Slag in Molten CaCl2 -- Evolution of Al-Ti-Mg-O Inclusions during Refining and Casting Process of Interstitial Free Steel -- Experimental Study on Carburization of Higher Vanadium-bearing Hot Metal -- Hematite Precipitation from High Iron Solution in Hydrometallurgy Process -- Influence On The Crystallization Phase Of Mold Flux By Magnetic Fields -- Kinetics Study on Limestone Decomposition in Early Converter Slag -- Mathematical Modeling and Analysis of Converter Slagging and Steelmaking Process by Replacing Part of Lime With Limestone -- Research of Digital Platform and Process Guidance Model in EAF Steelmaking Process -- Research on Factors Affecting and Prediction Model of Silicon Content in Hot Metal of Corex -- Studied on the Cooling Effect of CO2 on the Temperature of Vanadium in Converter -- Study on Grain Size and Porosity of the Produced Lime from Limestone in Early Converter Slag -- Study on Reducing Al2O3 Inclusions by Optimizing Refining Slag -- Study on the Volatilization of Sb2S3 in Vacuum -- The Effects of ZrO2, Y2O3 and Sc2O3 on the Properties of Mould Fluxes for High Manganese High Aluminum Steels -- Thermogravimetric Analysis and Kinetic Study of the Calcification Roasting of Vanadium Slag -- Viscosity of Mould Flux under Electromagnetic Field -- Part 10. …”
Full-text access
OPAC'ta görüntüle

8th International Symposium on High-Temperature Metallurgical Processing

İçindekiler: “…Part 1: Energy Efficient Clean Metallurgical Technology -- Flash Ironmaking from Magnetite Concentrate in a Laboratory Reactor: Experimental and CFD Work -- Synthesis of Chromite for Subsequent Carburization by Methane-hydrogen Gas Mixture -- Effects of Hydrogen-enriched Reduction on Metallurgical Properties of Iron-Bearing Burdens under BF Operation with Cog Injection -- Microwave-intensified Reduction of Biochar-containing Briquettes -- Refractory Challenges in Lead Recycling Furnaces -- Synthesis of Carbide Ceramics via Reduction of Adsorbed Anions on an Activated Carbon Matrix -- Part 2: Simulation of High Temperature Process -- A CFD Based Algorithm for Kinetics Analysis of the Reduction of Hematite Concentrate by H2+CO Mixtures in a Drop Tube Reactor -- A Continuous Dynamic Process Model to Design a Carbon Profile toward Yield Improvement -- Alloy Yield Prediction Model Based on the Data Analysis in EAF Steelmaking Process -- Analysis of Jet Behavior and Surface Fluctuations in the Meniscusof Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling -- CFD Study of Gas-liquid Phase Interaction Inside a Submerged Lance Smelting Furnace for Copper Smelting -- Debottlenecking High Temperature Metallurgical Plants through Modeling and Simulation -- Assessment of Slag Entrainment in a RH Degasser through Physical Modelling Using Circulating Fluids of Different Densities/Oil Systems for Simulating Steel Melt/Slag -- Part 3: Fundamental Research of Metallurgical Process -- Investigate on the Phase Composition of Vanadium Slag with High CaO Content and Influence of P2O5 on Crystallization Kinetics of Spinels -- Thermal Analysis Kinetics of the Solid-State Reduction of Nickel Laterite Ores by Carbon -- Thermodynamic and Experimental Investigations of High Temperature Refractory Corrosion by Molten Slags -- Thermodynamic Calculation on the Reactivity between Slag and Ti-stabilized Stainless Steel -- Part 4: Alloys and Materials Preparation -- Development of a Novel, Low-cost Titanium Extraction Process for Bulk or Powder Applications -- Evolution of Non-metallic Inclusions in Solid Fe-Al-Ti-N Alloy during Heating -- Preparation of Low-carbon Ti2O3 by Carbon thermal Reduction of the Mixture of Titanium Dioxide and Activated Carbon under Vacuum Condition -- Pyrometallurgical Studies for Manganese Extraction Using Turkish Ore Reserves -- Trace Elements Behavior during the Oxidation of Liquid SiMn Alloy -- Effect of Microalloy Elements V And Mg on Organization at High Heat Input Welding Shipbuilding Structure Steel -- Part 5: Extraction and Recovery of Metals -- Effect of Carbon Reductant On The Formation of Copper Doped Titanium Oxycarbonitride by Carbothermal Reduction and Nitridation -- Cohering Behavior of Scrap Powder in Kiln by a Novel Natural Stacking Method -- Direct-to-blister Copper Smelting with the ISASMELT™ Process -- Improving Separation of Cu-Fe from Copper Slag by Mineral Phase Reconstruction -- Phase Transformation of High Calcium Type Tin, Iron-bearing Tailings during Magnetizing Roasting Process -- Sensitivity of Contactless Ultrasound Processing to Variations of the Free Surface of the Melt with Induction Heating -- Extraction of Zinc from Willemite by Sodium Salt Roasting and Ammonia-leaching Process -- Part 6: Ironmaking and Steelmaking -- Influence of Puhrstahl Heraeus Refining Process on Aluminum Consumption in Interstitial-Free Steel Smelting Process -- Formation Mechanisms of Inclusions in Spring Steels -- Investigation on Coal Combustion Behaviors under the Oxygen Blast Furnace -- Inclusion Control with Ca Treatment to Improve Castability of a Low Carbon Al Killed Steel -- High Temperature Mineralization Mechanism of Granules during Iron Ore Sintering Process -- Reduction Behaviors of Sinter Made from Magnetite Concentrates in Reducing Process Simulated COREX Shaft Furnace -- Part 7: Treatment and Recycling of Slag/Wastes -- Introduction of Matte Droplets in Copper Smelting Slag -- Dissolution Behavior of Fe from Glassy Oxide Phase in Steelmaking Slag -- Penetration Depth of Microwave in Tire Rubber -- Effect of TiO2 on Thermophysical Properties and Structure of P-bearing Steelmaking Slags -- Analysis for Optimum Conditions for Recovery of Valuable Metals from E-Waste through Black Copper Smelting -- Precipitation Behavior of MxTi3-xO5 in the Titanium-Bearing Electric Furnace Slag -- Part 8: Utilization of Complex Ores -- Evaluation of Molybdenum Concentrates -- Intensification of Gold Leaching from a Multi-refractory Gold Concentrate by the Two-stage Roasting-alkaline Sulfide Washing-cyanidation Process -- The Recovery of Cobalt from Copper Converter Slag by Reduction-sulfurization Smelting at High Temperature -- Roasting of Celestite in Laboratory Scale Rotary Furnace -- The Experimental Study of CaCO3 in the Vanadium Extraction Process -- The Extraction of Zinc from Zinc Ferrite by Calcified Roasting and Ammonia Leaching Process -- Part 8: Poster I -- A New Method to Detect the High Temperature Distribution in the Ironmaking and Steelmaking Industry -- A Study for Reconstructing the Three-dimensional Temperature Field of a Blast Furnace Raceway Based on Monte Carlo Method -- Behaviour of Silicon in Nickel Laterite by Carbothermic Reduction in Vacuum -- Effect of CaO Addition on the Behavior of Vanadium and Phosphorus during Oxidation and Leaching Process -- Effect of Inner Shape on Blast Furnace Performance for Iron Making -- Effect of Lance Configurations on Coal Flow and Combustion Characteristics -- Effect of Silicon on Removal of Phosphorus from High Phosphorus Si-Mn alloy by CaO-Based Slag -- Effect of Super Gravity on the Solidification Structure and C Segregation of High Carbon Steel -- High Temperature Distribution Measurement of the Blast Furnace Raceway through Imaging Techniques and Optimization Algorithms -- Kinetics and Reduction Behavior of Self-reducing Briquettes Containing Blast Furnace Dust -- Model Analysis of the Phenomena of Pulverized Coal Injection in Blast Furnace -- Sintering Performance of Blends Containing High Proportion of Limonite Iron Ore Fines -- Thermodynamics Study on Phosphorus Distribution between 2CaO•SiO2-3CaO•P2O5 Solid Solution and Liquid Slag -- Two-step Copper Smelting Process at Dongying Fangyuan -- Part 9: Poster II -- Comparison of the Ringing Characteristics between Acid and Alkaline Iron Ore Pellets Powder in Kiln -- Comprehensive Utilization of Ludwigite Iron Concentrate by Gas-based Direct Reduction -- Decarburization of Spent Petrochemical Catalysts via Microwave Oxidation Roasting -- Effect of FeO Content in Laterite Nickel Slag on the Corrosioin Behaviour of Refractory Materials -- Effects of Blowing Conditions on the Dispersion States of Materials Charged into Bottom Blown Oxygen Smelting Furnace -- Effects of Pre-oxidation and Additives on Carbothermic Reduction of Ilmenite Concentrate -- Influence of Converter Slag on Decomposition Behavior of Limestone during BOF Steelmaking Process -- Influence of Hot Charge on Blast Furnace Performance for Iron Making -- Investigation and Application of Evolution System of Stock Surface Gas Flow Distribution in Blast Furnace -- Investigation of the Carbothermic Reduction of Chromium-containing Vanadium Extraction Residue -- Molecular Dynamics Study of the Structural Properties with Varying -- One-step Extraction of Lead from Spent Lead-acid Battery Paste via Reductive Sulfur-fixing Smelting: Thermodynamic Analysis -- Removal of Cd(II) Ion from Aqueous Solution by Adsorption on Wasted Low Grade Phosphorus-containing Iron Ore -- Research on the Flow Behavior of Molten Slag through Pore -- Study on the Influence of Materials on Heat Transfer Characteristics of Blast Furnace Cooling Staves.…”
Full-text access
OPAC'ta görüntüle

Characterization of Minerals, Metals, and Materials 2019

İçindekiler: “…Characterization and Uses of Metallurgical Slags -- Preparation and Characterization of NaNO3/BFS Composite Phase Change Materials -- Characteristics of WISCO Steelmaking Slags -- Effects of Civil Construction Waste on Properties of Lining Mortars -- Pilot Trial of Direct Modification of Molten Blast Furnace Slag and Production of High Acidity Coefficient Slag Wool Fibers -- Reduction Behavior of Ternary Calcium Ferrites for CaO-Fe2O3-MgO System -- Propagation of Power Ultrasound in Calcium Ferrite Melt -- Part 6. …”
Full-text access
OPAC'ta görüntüle

Characterization of Minerals, Metals, and Materials 2018

İçindekiler: “…Characterization and Uses of Metallurgical Slags -- Preparation and Characterization of NaNO3/BFS Composite Phase Change Materials -- Characteristics of WISCO Steelmaking Slags -- Effects of Civil Construction Waste on Properties of Lining Mortars -- Pilot Trial of Direct Modification of Molten Blast Furnace Slag and Production of High Acidity Coefficient Slag Wool Fibers -- Reduction Behavior of Ternary Calcium Ferrites for CaO-Fe2O3-MgO System -- Propagation of Power Ultrasound in Calcium Ferrite Melt -- Part 6. …”
Full-text access
OPAC'ta görüntüle

7th International Symposium on High-Temperature Metallurgical Processing

İçindekiler: “…Flash Reduction of Magnetite and Hematite Concentrates with Hydrogen in a Lab-Scale Reactor for a Novel Ironmaking Process -- Investigation of Coal Tar Pitch Binder for the Production of Formed Coal Briquettes for COREX from High Volatile Coal Powder -- Upgrading of Iron-Rich Titanium Minerals Using a Molten Salt Process -- Direct Electrolytic Production of Mo-Si-Ti-C Composites from Their Oxides/Sulfide/Carbon Mixture Precursor in Molten Salt -- Reduction Kinetics of Magnetite Concentrate Particles with H2 + CO at 1200 to 1600 °C Relevant to a Novel Ironmaking Process -- Advanced Oxygen Lances for Safer Furnace Tapping Operations -- Utilization of Pine Nut Shell for Preparation of High Surface Area Activated Carbon by Microwave Heating and KOH Activation -- Research on High Temperature Mechanical Properties of 50Cr5MoV Roll Steel -- Separation of Rhenium and Molybdenum from Molybdenite Concentrate by Microwave-Assisted Roasting -- Active Oxidation and Fume Formation from Liquid SiMn -- Research on Enrichment of MFe and RO Phase from Converter Steel Slag by Super Gravity -- Volatilization of Rhenium from Molybdenite Concentrate by Oxidative Roasting -- Kinetic Investigation of the Electric Furnace Copper Slag Treatment -- The Extraction of Zinc from Willemite by Calcified-Roasting and Ammonia-Leaching Process Based on Phase Reconstruction -- An Investigation on Antimony Production by Using Niederschlag Process -- Oxygen-Rich Side Blow Bath Smelting Technology - New Developments in China -- Carbon Refractories in an Oxidizing Process? …”
Full-text access
OPAC'ta görüntüle

Proceedings of the 3rd Pan American Materials Congress

İçindekiler: “…Part 1: Pan American Materials Congress: Advanced Biomaterials -- Analysis of Biomimetic Surgical Clip Using Finite Element Modeling for Geometry Improvement and Biomaterials Selection -- Chemical composition effect of sol-gel derived bioactive glass over bioactivity behavior -- Effects of Dialium guineense based zinc nanoparticle material on the inhibition of microbes inducing microbiologically influenced corrosion -- Injectability evaluation of bone-graft substitutes based on carrageenan and hydroxyapatite nanorods -- Synthesis and characterization of Ni0.5Zn0.5Fe2O4@mSiO2 core shell nanocarrier for drug delivery applications -- Part 2: Pan American Materials Congress: Advanced Manufacturing -- Carbon Based Coatings Deposited On Nitrided Stainless Steel: Study Of Thermal Degradation -- Comparative Mechanical Analysis Between Epoxy Composite Reinforced With Random Short Cuarua Fibers And Aligned Long Curaua Fibers -- Effect of Tool Rotation on Tool Wear Phenomenon in Rotary Tool micro-USM -- Numerical Modeling of High-Velocity Impact Welding -- Selective Laser Sintering of Polyamide/Hydroxyapatite Scaffolds -- Part 3: Pan American Materials Congress: Materials for Green Energy -- A comparison between recycled spent zeolite and calcite limestone for manganese removal -- Effect of Mo6+ Substitution on Microstructure and Lithium Ionic Conductivity of Garnet-Type Li7La3Zr2O12 Solid Electrolytes by Field Assisted Sintering Technology -- Electromagnetic Levitation Refining Of Silicon-iron Alloys for Generation of Solar Grade Silicon -- Green Extract of Mate Tea as Corrosion Inhibitor of Copper and Aluminum -- Platinum Salts Synthesis as Precursors to Get Heterogeneous Catalysts for Biofuels Production -- Technical and Environmental Assessment of an Alternative Binder for Low Traffic Roads with LCA Methodology -- Part 4: Pan American Materials Congress: Materials for Infrastructure -- Anticorrosion and Adsorption Mechanism of Rhizophora mangle L Leaf-extract on Steel-reinforcement in 3.5% NaCl-immersed Concrete -- Cassia fistula leaf-extract Effect on Corrosion-inhibition of Stainless-steel in 0.5 M HCl -- Effect of C5H11NO2S on Reinforcing-steel Corrosion in Concrete Immersed in Industrial/Microbial Simulating-environment -- FIBER REINFORCED CONCRETE MANUFACTURED WITH ELECTRIC ARC FURNACE SLAG -- Jigs, hydro-cyclones and sensor-based sorting to value recycled aggregates -- Performance of hydraulic mixes manufactured with electric arc furnace slag aggregates -- POROUS ASPHALT MIXTURES WITH 100% SIDERURGIC AGGREGATES -- Part 5: Pan American Materials Congress: Materials for Oil and Gas Industry -- Blends of PVDF with its processing waste: Study of the mechanical properties of the blends thermally aged -- DYNAMIC TRANSFORMATION AND RETRANSFORMATION DURING THE SIMULATED PLATE ROLLING OF AN X70 PIPELINE STEEL -- Effect of Heat Input on the microstructure and toughness of welded API pipelines -- EVALUATION OF NON-DESTRUCTIVE TECHNIQUES (THERMOGRAPHY, ULTRASOUND AND EDDY CURRENT) FOR DETECTION OF FAILURES IN METALLIC SUBSTRATES WITH COMPOSITE ANTICORROSIVE COATINGS -- Structural Integrity of Pipelines -- Part 6: Pan American Materials Congress: Materials for Transportation and Lightweighting -- ADVANTAGES OF HOT COMPRESSION IN THE MANUFACTURE OF AlB4C COMPOSITES -- An Improved Silicon Carbide Monofilament for the Reinforcement of Metal Matrix Composites -- Analysis of coir fiber porosity -- BALLISTIC PERFORMANCE IN MULTILAYER ARMOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS -- Curaua non-woven fabric composite for ceramic multilayered armors: A lightweight, natural, and low cost alternative for KevlarTM -- Effect of Forging on Microstructure, Texture and Compression Behaviour of Extruded AZ31B -- EFFECTS OF HYPOEUTECTIC Sc ADDITIONS TO Al-4.5 wt% Cu UNDER DIFFERENT COOLING RATES -- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH FIQUE FABRIC -- IZOD IMPACT TESTS IN POLYESTER MATRIX COMPOSITES REINFORCED WITH JUTE FABRIC -- Microstructure and Hardness of Subzero Quenched and Heat Treated Ti-6Al-4V Alloy -- Nano-Additive Reinforcement of Thermoplastic Microballoon Epoxy Syntactic Foams -- Nanocomposites Mechanical and Tribological Properties using Graphene Coated Ceramic Nanoparticles for Light Weight Applications -- Synthesis of Energetic Composites in Ti-Al-B-C System by Adiabatic Explosive Compaction -- Tensile and impact properties of two fiber configurations for curaua reinforced composites -- Thermo\\8722;Mechanical behavior of nanostructure polyacrylic polymer based on Al2 O3 and bentonite nanoparticles -- Thermo\\8722;mechanical properties of waterborne acrylate hybrid nanocomposites -- Thermo-mechanical properties of copolymer/clay nanocomposites: A comparative study of production method by in-situ and solution mixture -- Part 7: Pan American Materials Congress: Minerals Extraction and Processing -- Biotechnological recycling of precious metals sourced from post-consumer products -- Biotechnologies for water recycling in the mineral industry -- Dissolution thermodynamics of smithsonite in alkaline iminodiacetate aqueous solution -- Effect of ethylenediamine on smithsonite flotation -- Extraction of Gold from sands and Slimes Tailings Dump from Mazowe Mine, Zimbabwe -- Gold Recovery from Waste Solutions of PCB Gold Plating Process using Hydro Cyclone Reactor for Demonstration Study -- Improving Quality of Coke Made from Chinese Xinjiang Gas Coal with High Strength Modifier -- INVESTIGATING THE DISSOLUTION CHARACTERISTICS OF STRONTIUM SULFIDE -- Kinetic study on the leaching of vanadium-bearing converter slag with dilute sulfuric acid -- Leaching of Spent Ni-Mo Hydrodesulphurization (HDS) Catalyst in Oxalic Acid Solutions -- Novel Adsorbent from Iron Ore Concentration Tailings for Toxic Cationic Dye Removal from Water -- Preliminary analysis of the application of sensor based sorting on a limestone mine in the region Caçapava do Sul, Brazil -- Preparation of high grade Industrial Copper Compound from a Nigerian Malachite mineral by Hydrometallurgical process -- PROCESS OF IMPROVING THE FLOTATION USING ULTRASONIC BOMBARDMENT -- Production of strontianite from celestite ore in carbonate media -- Reduction Kinetics and Characterization Study of Synthetic Magnetite Micro Fines -- Study on Leaching Valuable Elements from Bayan Obo Tailings -- Study on thermal decomposition and oxidation characteristics of iron ores -- The direct leaching of micro-disseminated gold concentrate by bromide process and the characterization of leaching products -- Working Experience with the new WOX Plant to treat zinc waelzoxide at ZGH Boleslaw SA, Poland -- Part 8: Pan American Materials Congress: Nanocrystalline and Ultra-fine Grain Materials and Bulk Metallic Glasses -- Continuous dynamic recovery in pure aluminum deformed to high strain by accumulative press bonding -- Effects of Natural Aging and Post-processed Heat Treatment on the Microstructure and Mechanical Properties of Friction Stir Processed Al-7B04 -- Evaluation of the hardening and softening effects in Zn-21Al-2Cu with as cast and homogenized microstructure processed by equal channel angular pressing -- Part 9: Pan American Materials Congress: Steels -- Effect of titanium sulfide precipitates on grain size in low carbon steel -- Evolution of Austenite Dislocation Density during Hot Deformation using a Physical Dynamic Recrystallization Model -- Influence of a Rapid Heating on the Microstructure and Properties of Press-Hardening Steel Sheets -- Jansto:New Generation Niobium Bearing Structural Steels for Future Infrastructure Demands -- Kinetic study of the austenite decomposition during continuous cooling in a welding steel -- Microstructural Evolution in Microalloyed Steels during Thermomechanical Rod Rolling -- MODELING OF METAL-SLAG MASS AND MOMENTUM EXCHANGES IN GAS-STIRRED LADLES -- Study on adjustment and optimization of LF refining slag of spring steel 55SiCrA -- Tempering Response of Bainitic and Martensitic Microstructures -- The research on the relationship between gas movement behaviors and circulating flow of the molten steel in RH.…”
Full-text access
OPAC'ta görüntüle

Extraction 2018 Proceedings of the First Global Conference on Extractive Metallurgy /

İçindekiler: “…Pyrometallurgy Keynotes -- Role of Research in Non-ferrous Metallurgy Development - Peter Hayes Contributions To Modern Pyrometallurgy -- The Role of Research in Pyrometallurgy Technology Development - From Fundamentals to Process Improvements - Future Opportunities -- Sulfide Smelting: Thirty-Five Years of Continuous Efforts to Find New Value Adding Solutions -- The Changing World of Metallurgy Education -- Part 2. 7th International Symposium on Advances in Sulfide Smelting -- Sulfide Smelting Development in Japan during the Past Half Century -- Review of Boliden Harjavalta Nickel Smelter -- Redesign and Rebuild of the Pan Pacific Copper Flash Smelting Furnace -- From Fundamentals to Furnace Control - Making the Most of Modern Technologies -- Pyrometallurgical Processing of Desulphurization Slags -- High Temperature Phase Formation at the Slag/Refractory Interphase at Ferronickel Production -- ISASMELT™ Technology for Sulfide Smelting -- Refractory Design and the Role of Numerical Simulations -- Wear Phenomena in Non-ferrous Metal Furnaces -- A Scientific Roadmap for Refractory Corrosion Testwork -- Investigation of Refractory Failure in a Nickel Smelting Furnace -- Mathematical Modeling of Waterless Matte Granulator for Debottlenecking of Conventional Sulfide Smelters -- Desulfurization of the Non-Ferrous Smelter Flue Gases Based on Scrubbing with a Carbonate Eutectic Melt and Natural Gas Regeneration -- Advanced Thermochemical Fundamental and Applied Research to Improve Integrity of the Steel Water Jacketed Furnace at Port Pirie -- Sustainable Development Considerations in Primary Copper Smelting -- Influence of Arsenic on the Chemical Wear of Magnesia-chromite Refractories in Copper Smelting Furnaces -- Improved Copper Smelter and Converter Productivity through the Use of a Novel High-grade Feed -- Semi-discrete Dynamics and Simulation of Peirce-Smith Converting -- Development of Continuous Radar Level Measurement for Improved Furnace Feed Control -- Research on Recovery of Valuable Metals in Waste Acid from Copper Smelting Flue Gas Acid-making and Reduction and Harmless Treatment of Solid Wastes -- Fundamental Process Equilibria of Base and Trace Elements in the DON Smelting of Various Nickel Concentrates -- Challenges and Opportunities of a Lead Smelting Process for Complex Feed Mixture -- Application of MPE model to Nickel Smelting -- Practice on Exploration of Oxygen-enriched Converting Industrial Production by Kaldo furnace -- Ust-Kamenogorsk Metallurgical Complex : A Silent Achiever -- Trace Metal Distributions in Nickel Slag Cleaning Furnace -- Case Study on the Application of Research to Operations - Calcium Ferrite Slags -- Kinetics of Oxidation of Pyrrhotite -- Formation Mechanism of Ferronickel Alloy due to the Reaction Between Iron and Nickeliferous Pyrrhotite at 850-900 °C -- Two-step Copper Smelting Process at Dongying Fangyuan -- ISASMELT™ - Flexibility in Furnace Design -- Investigation of Oxygen Bottom Blown Copper Smelting Process -- Top SubmergedLance Furnace Lining Cooling System Upgrade -- Application Study on the Technology of Reducing Cu in Discarded Slag -- Thermodynamic Consideration of Copper Matte Smelting Conditions with Respect to Minor Element Removal and Slag Valorization Options -- Optimizing Smelter Uptime through Digital Asset Management -- Reducing Refining Cycle Times to Extend Anode Furnace Campaign Life at Kennecott Copper -- Smelting Mechanism in the Reaction Shaft of a Commercial Copper Flash Furnace -- Progressing Towards Furnace Modernization by Utilizing Comparative Analysis of Acousto Ultrasonic-Echo (AU-E) Monitoring: Case Studies -- Kinetics of Roasting of a Sphalerite Concentrate -- Thermodynamic Modeling of Oxygen Bottom-Blowing Continuous Converting Process -- Thermodynamic Considerations of Copper Complex Resources Smelting Process -- Part 3 -- Peter Hayes Symposium on Pyrometallurgical Processing -- Peter Charles Hayes' Contributions to Metallurgical Research: Brief Biography and List of Publications -- Integrated Pyrorefining of Lead at Teck's Trail Operations -- Relating Reported Carbon Dioxide Emissions to Iron and Steelmaking Process Details -- Process Zones Observed in a 48 MVA Submerged Arc Furnace Producing Silicomanganese According to the Ore-based Process -- Heat Transfer to Copper Coolers in Freeze Lined Furnaces: The Role of Radiation and the Influence of Slag Liquidus -- Interfacial Reaction between Magnesia Refractory and EAF Slag -- Kinetics of Dephosphorisation of Iron Carbon Alloys; the Importance of Competing Reactions, Slag Properties and CO Bubbles -- A Study of Cementite Formation in the Reduction of Hematite by CO-CO2 Gas Mixture Using High Temperature XRD -- Condensation of SiO and CO in Silicon Production - A Literature Review -- Phase Transformations from Quartz to Cristobalite -- Forming Micro-bubbles in Liquid Steel -- Innovative Applications of Bubbles and Drops to Ferrous Process Technology -- Carbochlorination of Low-grade Titanium Slag to Titanium Tetrachloride inMolten Salt -- Calciothermic Reduction and Electrolysis of Sulfides in CaCl2 Melt -- Reaction Behavior of Phosphorus in Multi-phase CaO-FeOX-SiO2-P2O5 Flux System -- Microanalysis and Experimental Techniques for the Determination of Multicomponent Phase Equilibria for Non-ferrous Smelting and Recycling Systems -- Thermodynamic Study on the Equilibrium of Platinum Group Metals between Slag and Molten Metals -- High Temperature Recovery of Rare Earth Ortho-Ferrites from Permanent Magnets -- On the Evaporation of S from Liquid Fe-C-S Alloy -- Extraction of Pig Iron and Ferrosilicon from Low-grade Bauxite Ores -- Kinetics of Bauxite Residue Sintering -- Multicomponent Thermodynamic Databases for Complex Pyrometallurgical Processes -- Verification of Permeability and Forchheimer Drag Coefficients of Al2O3 Ceramic Foam Filters (CFF) at High and Low Flow Rates -- Computational Modeling of a Secondary Lead Reverberatory Furnace: Effect of Burden Geometry -- Development ofa Thermodynamic Database for the Multicomponent PbO-"Cu2O"-FeO-Fe2O3-ZnO-CaO-SiO2 System for Pyrometallurgical Smelting and Recycling -- Reduction in GHG Emissions of Steel Production by Direct Injection of Renewable Biocarbon -- Preparation of Ferronickel from Nickel Laterite Ore via Semi-molten Reduction Followed by Magnetic Separation -- Thermodynamic Modeling of the Solid State Carbothermic Reduction of Chromite Ore -- Production of Ferromanganese Alloys from Silicomanganese Sludge and an Iron Source -- New Paradigms for Iron Ore Pelletization -- The In Situ Micro Raman Study of the NO3- Electrochemical Behavior in Molten NaNO3-KNO3 Mixtures -- Influence of Manganese on Dissolution of Graphite in Manganese Iron Alloys -- Experimental Investigation of Pyrometallurgical Treatment of Zinc Residue -- Dynamic modelling of molten slag-matte interactions in an industrial flash smelting furnace settler -- High Temperature Characteristics of Slags Originating from the Production of Synthetic Tantalum Concentrate -- Recovery of Nickel and Vanadium from Heavy Oil Residues using DC Plasma Smelting -- Iron Segregation Roasting Processes -- Towards a Microwave Metal Extraction Process -- The Influence of Aluminum on Indium and Tin Behavior in Secondary Copper Smelting -- Behavior of Nickel as a Trace Element and Time-dependent Formation of Spinels in WEEE Smelting -- The Distribution of Sn between CaO-CuOx- FeOy-SiO2 Slag and Copper Metal at 1300 \\176 C -- Gaseous Reduction of Mn ores in CO-CO2 atmosphere -- Optimization of Slag Composition in View of Iron Recovery and Dephosphorization in EAF Process -- A New Pyrometallurgical Recycling Technique for Lead Battery Paste without SO2 Generation - A Thermodynamic and Experimental Investigation -- Understanding Viscosity-structure Relationship of Slags and its Influence on Metallurgical Processes -- Reduction of Manganese Ore Pellets in a Methane-containing Atmosphere -- Kinetics of Reduction-carburization of Synthetic (Fe,Mg)(Cr,Al2O4 Solid Solutions by Ar-CH4-H2 Gas Mixtures -- Chemical Reactivity and Thermal Stability of the Phosphate Binder used in Ceramic Foam Filters (CFFs) -- Part 4. …”
Full-text access
OPAC'ta görüntüle

Energy Technology 2017 Carbon Dioxide Management and Other Technologies /

İçindekiler: “…Part 1: Energy Technologies: Energy Technologies -- Continuous optimization of the energy input - The success story of AOS -- Part 2: Energy Technologies: CO2 Management and Sustainable Metallurgical Processes -- Transforming the way electricity is consumed during the aluminium smelting process -- The thermodynamics of slag forming inorganic phases in biomass combustion processes -- Leaching of Sb from TROF furnace Doré Slag -- Potential CO2 emission reduction and H2 production using industrial slag wastes originating from different industrial sectors -- Part 3: Energy Technologies: Novel Technologies -- Modeling Anthropogenic Heat Flux in Climate Models -- In-situ microscopic study of morphology changes in natural hematite and Cu-spinel particles during cyclic redox gas exposures for chemical looping applications -- Thermodynamic stability of condensed phases in the ternary system CaO-Cu-O by the EMF method -- Experimental Study on Electro-spraying of Ethanol Based on PDA Measurement -- Part 4: Energy Technologies: Heat Recovery -- Integrated utilization of sewage sludge and coal gangue in clinker manufacture -- Valuable metals and energy recovery from electronic waste streams -- Dry Granulation of Hot Metal and Heat Recovery from Off-Gas -- Energy Recovery of Livestock Waste in Taiwan -- Life cycle assessments of incineration treatment for sharp medical waste -- Part 5: Energy Technologies: Poster Session -- Effect of granularity on pretreatment of coke with microwave irradiation -- Effect of Microwave and ultrasonic coupling treatment on granularity and microstructure of Pulverized Coal -- Influence of Sodium on Coke Microstructure in Different Reaction Atmosphere -- Part 6: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste I -- Maximizing the values of steelmaking slags -- Recycling of zinc from the steelmaking dust in the sintering process -- Direct Preparation of Metal Doping Ni-Zn Ferrite from Zn-containing Electric Arc Furnace Dust by Calcination Method -- Part 7: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste II -- Synthesis and Characterization of Ferrochromium Slag Based Glass-ceramics -- Hydrometallurgical processing of copper smelter dust for copper recovery as nanoparticles: a review -- Part 8: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste III -- Chromium removal from iron-rich waste generated during processing lateritic nickel ores -- Removal of Magnesium from Liquor Produced by Nickel Mining by Crystallization -- Synthesis of Magnesium Oxide from Ferronickel Smelting Slag through Hydrochloric Acid Leaching-Precipitation and Calcination -- Thermodynamic analysis of the recycling of aircraft Al alloys -- Lithium-ion Battery Recycling Through Secondary Aluminum Production -- Part 9: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Poster Session -- Alternative method for materials separa-tion from crystalline silicon photovoltaic modules -- Bioleaching process for metal recovery from waste materials -- Chemical Analysis of Sludge Originating from Industrial Painting Performed in Brazil -- Preparing ferrosilicon alloy with copper slag -- Research on Optimization of Sintering Mixture with Low-grade Complex Ore -- Part 10: Solar Cell Silicon: Silicon Production, Crystallization, and Properties -- Study on Producing Solar Grade Silicon by Carbothermal Reduction of Andalusite Ore -- Phase Analysis of the Si-O2 System -- Characterization of Composition, Morphology, and Structure of Disi Raw Sandstones in Jordan -- Part 11: Solar Cell Silicon: Silicon Impurity Removal and Refining -- Effect of magnesium addition on removal of impurities from silicon by hydrometallurgical treatment -- Evaporation removal of boron in molten silicon using reactive fluxes -- Part 12: Solar Cell Silicon: Silicon Photovoltaics -- Electrodynamic Eddy Current Separation of End-of-Life PV Materials -- Investigation on Quartz Crucibles for Monocrystalline Silicon Ingots for Solar Cells -- Influence of Oxygen Content on the Wettability of Silicon on Graphite -- Particle Separation in Silicon Ingot Casting Using AC Magnetic Field -- Part 13: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Advances in Environmental Technologies: Characterization and Uncertainty -- Characteristics of Municipal Solid Waste Incineration Bottom Ash with Particulate Matters PM2.5 ~PM10 -- Part 14: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: New Areas of Value Recovery -- Accelerating life-cycle management protocols for new generation batteries -- Recovery of Metals and Nonmetals from Waste Printed Circuit Boards (PCBs) by Physical Recycling Techniques -- The use of rice husk ash as an aggregate for foundry sand mould production -- Part 15: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Poster Session -- Chemical reduction of Fe(III) in nickel lateritic wastewater to recover metals by ion exchange -- Chronopotentiometry applied to the determination of copper transport properties through a cation-exchange membrane -- Effect of flow rate on metals adsorption of synthetic solution using chelating resin Dowex XUS43605 in column experiments.…”
Full-text access
OPAC'ta görüntüle

Energy Technology 2019 Carbon Dioxide Management and Other Technologies /

İçindekiler: “…Energy Technologies and CO2 Management Symposium -- Gas Hydrate-based CO2 Separation Process: Quantitative Assessment of the Effectiveness of Various Chemical Additives Involved in the Process -- Tar Removal from Hot Coke Oven Gas for H2 Amplification with In Situ CO2 Capture -- An Evaluation Method for Material and Energy Conversion Effect with Steel Manufacturing Process Data -- Preparation and Characterization of Activated Carbon from Waste Ion-exchange Resin for CO2 Adsorption -- Evaluation of Variation in the Life Cycle Based Environmental Impacts for Copper Concentrate Production -- Direct Reduction of Copper Slag Composite Pellets within Lignite Using Biomass as Binder -- Thermodynamic Analysis of Incineration Treatment of Waste Disposable Syringes in an EAF Steel-making Process -- The Reduction Kinetic of the Combined Cu-based Oxygen Carrier Used for Chemical Looping Gasification Technology -- Synergistic Effect Between Fat Coal and Poplar During Co-pyrolysis with Thermal Behavior and ATR-FTIR Analysis -- Flow Characteristic of Two-phase Bubble Reactor for Slag Waste Heat Recovery -- Improving Energy Efficiency in Direct Method for Continuous Casting of Lead Sheets -- Research on High Efficiency Energy Conversion Technology for Modern Hot Blast Stove -- An Exergy Study of Cowper Stove Operations with an Iron Blast Furnace -- Waste Heat Recovery from Aluminum Production -- Leaching and Carbonation of Electric Arc Furnace(EAF) Slag under a Microwave Field for Mineral Carbonation -- A Novel Preparation of Bi2O3 and Their Potent Photocatalytic Activity under Visible-light Irradiation -- Energy Conservation in Sintering Ignition Process Based on Comprehensive Ignition Intensity -- Part 2. …”
Full-text access
OPAC'ta görüntüle

Applications of Process Engineering Principles in Materials Processing, Energy and Environmental Technologies An EPD Symposium in Honor of Professor Ramana G. Reddy /

Full-text access
OPAC'ta görüntüle

International Congress on Polymers in Concrete (ICPIC 2018) Polymers for Resilient and Sustainable Concrete Infrastructure /

İçindekiler: “…Suitability and Durability -- Latex-Modified Concrete Overlays Using Recycled Waste Paint -- Effect of Using Kaolin and Ground Granulated Blast-furnace Slag on Green Concrete Properties -- Lightweight Structural Recycled Mortars Fabricated with Polyurethane and Surfactants -- Hydration in Mortars Manufactured with Ladle Furnace Slag (LFS) and the Latest-Generation of Polymeric Emulsion Admixtures -- Chemical Resistance of Vinyl-ester Concrete with Waste Mineral Dust Remaining After Preparation of Aggregate for Asphalt Mixture -- Part VI Geopolymers -- Performance Studies on Self Compacting Geo Polymer Concrete at Ambient Curing Condition -- Effect of 3D Printing on Mechanical Properties of Fly Ash Based Inorganic Geopolymer -- Optimization of Fly Ash Based Geopolymer Using a Dynamic Approach of the Taguchi Method -- Microstructural and Strength Investigation of Geopolymer Concrete with Natural Pozzolan and Micro Silica -- Performance of Steel-Fiber-Reinforced High Performance One-Part Geopolymer Concrete -- Effect of Different Class C Fly Ashes Composition on the Properties of the Alkali Activated Concrete -- Effect of Curing Temperatures on Zero-Cement Alkali-Activated Mortars -- Properties of PVA Fiber Reinforced Geopolymer Mortar -- Thermal Performance of Fly Ash Geopolymeric Mortars Containing Phase Change Materials -- Development of Fiber-Reinforced Slag-Based Geopolymer Concrete Containing Lightweight Aggregates Produced by Granulation of Petrit-T -- Applications of Geopolymers in Concrete for Low-Level Radioactive Waste Containers -- Part VII Fiber Reinforced Polymers (FRP) -- Microstructure and Mechanical Property Behavior of FRP Reinforcement Autopsied from Bridge Structures Subjected to In-situ Exposure -- The Influences of Mechanical Load on FRP Composites Subjected to Environmental Corrosion -- Finite Element Analysis of RC Beams Strengthened in Shear with NSM FRP Rods -- Effect of Sustained Load Level on Long-term Deflections in GFRP and Steel-Reinforced Concrete Beams -- Flexural Behavior and Cracks in Concrete Beams Reinforced with GFRP Bars -- Flexural Rigidity Evaluation of Seismic Performance of Hollow-Core Composite Bridge Columns -- Three-Dimensional Numerical Analysis of Hollow-Core Composite Building Columns -- Pultruded GFRP Reinforcing Bars with Carbon Nanotubes -- On Mechanical Characteristics of HFRP Bars with Various Types of Hybridization -- Fatigue Behavior Characterization of Superelastic Shape Memory Alloy Fiber-reinforced Polymer Composites -- Strength Performance of Concrete Beams Reinforced with BFRP Bars -- Part VIII PC with Nanomaterial -- A Comparative Study on Colloidal Nano Silica Incorporation in Polymer Modified Cement Mortars -- Performance of UHPC and Nano-Modified Polymer Concrete (NMPC) Composite Wall Panels for protective Structures -- Mechanical Characterization of Polymer Nanocomposites Reinforced with Graphene Nanoplatelets -- Oilwell Cement Modified with Bacterial Nanocellulose -- Effect of Incorporating Nano…”
Full-text access
OPAC'ta görüntüle

Energy Technology 2018 Carbon Dioxide Management and Other Technologies /

İçindekiler: “…Energy Technologies and CO2 Management Symposium -- Gas Hydrate-based CO2 Separation Process: Quantitative Assessment of the Effectiveness of Various Chemical Additives Involved in the Process -- Tar Removal from Hot Coke Oven Gas for H2 Amplification with In Situ CO2 Capture -- An Evaluation Method for Material and Energy Conversion Effect with Steel Manufacturing Process Data -- Preparation and Characterization of Activated Carbon from Waste Ion-exchange Resin for CO2 Adsorption -- Evaluation of Variation in the Life Cycle Based Environmental Impacts for Copper Concentrate Production -- Direct Reduction of Copper Slag Composite Pellets within Lignite Using Biomass as Binder -- Thermodynamic Analysis of Incineration Treatment of Waste Disposable Syringes in an EAF Steel-making Process -- The Reduction Kinetic of the Combined Cu-based Oxygen Carrier Used for Chemical Looping Gasification Technology -- Synergistic Effect Between Fat Coal and Poplar During Co-pyrolysis with Thermal Behavior and ATR-FTIR Analysis -- Flow Characteristic of Two-phase Bubble Reactor for Slag Waste Heat Recovery -- Improving Energy Efficiency in Direct Method for Continuous Casting of Lead Sheets -- Research on High Efficiency Energy Conversion Technology for Modern Hot Blast Stove -- An Exergy Study of Cowper Stove Operations with an Iron Blast Furnace -- Waste Heat Recovery from Aluminum Production -- Leaching and Carbonation of Electric Arc Furnace(EAF) Slag under a Microwave Field for Mineral Carbonation -- A Novel Preparation of Bi2O3 and Their Potent Photocatalytic Activity under Visible-light Irradiation -- Energy Conservation in Sintering Ignition Process Based on Comprehensive Ignition Intensity -- Part 2. …”
Full-text access
OPAC'ta görüntüle

Advances in Manufacturing Technology Select Proceedings of ICAMT 2018 /

İçindekiler: “…Evaluation of Tensile Properties of Nano Clay Filled Madar Fiber Reinforced Polyester Hybrid Composites -- Characterization of Economical Aluminium Mmc Reinforced With Weld Slag Particles -- Optimization of Weld-Bead Parameters Of Plasma Arc Welding Using Ga and Iwo -- Experimental Studies on the Effect of Basalt Powder Inclusion On Mechanical Properties of Hybrid Epoxy And Polyester Composites Reinforced With Glass Fiber -- An Experimental Investigation on Tensile Properties of Hybrid Bio Polyurethane Composite: Modelling and Optimization -- Improvement of Machining Characteristics by Edm with Graphite Powder Mixed Dielectric Medium -- Measuring Industrial Symbiosis Index Using Multi Grade Fuzzy Approach -- Fabrication and Machining Characteristics of Al7075-Red Mud and Al7075-Tic Metal Matrix Composites -- Multi Criteria Optimization of Machining Parameters in Wedm of Titanium Alloy 6242 -- Water Absorption & Density Tests on the Water Hyacinth Based Partial Green Composite -- ExperimentalAnalysis on the Mechanical Properties of Dissimilar Material Joint During Pctig Welding -- Influence of Flux Coating During Dissimilar Welding of Copper With Brass Using Atig Welding Process -- Innovative Nitride Film Deposition on Copper Interconnects of Mems Devices Using Plasma Enhanced Chemical Vapour Deposition Techniques.…”
Full-text access
OPAC'ta görüntüle

Ground Improvement Techniques and Geosynthetics IGC 2016 Volume 2 /

İçindekiler: “…THEME 3 : GROUND IMPROVEMENT AND GEOSYNTHETICS -- Behaviourial Study on Geopolymer Column in Soil -- A Study of Parameters Influencing Efficiency of Micropile Groups -- Alteration of CBR Values in Soft Soils using Enzymatic Lime -- Factors which Influence PVD Performance in Soft Clay Consolidation -- Experimental Study of Heave Control Technique for Expansive Soil using Micropiles and Geotextile Layers -- Effect of Underground Void on the Internal Stress Distribution in Soil -- Influence of Properties of Infill Material on the Behaviour of Geocells -- Investigation of Glass Fiber Reinforcement Effect on the CBR Strength of Cohesive Soil -- Bearing Capacity of Strip Footing on Clay Soil Reinforced with Metal Strips and with Anchors -- Application of Microbial Induced Carbonate Precipitation for Soil Improvement Via Ureolysis -- Influence of Organic Content on Fly Ash Stabilisation of Clay -- Strength Behaviours of the Clayey-Silt Soil Mixed with Fly Ashand Sand -- Strength Behaviour Of Expansive Soil Treated With Quarry Dust And Ferric Chloride -- Lime Stabilization of Subgrade with Waste Sand as Partial Soil Replacement -- Assessment Of Vetiver Grass Root-Reinforcement In Strengthening The Soil -- Geotechnical Aspects of Constructions Along the Canal Embankment using Rice Husk Ash as Stabilizer -- Use of Jhama Columns as Replacement of Stone Columns -- Laboratory Study on the Performance of Geo-Synthetic Reinforced Sand Bed -- Repeated Load Response of Encapsulated Granular Trench Supported Footings on Embankments -- Re-Appraisal of Physico-Mechanical Stability of Lime Treated Soils -- Back analysis of PVD performance in Mumbai Port -- Discharge and Absorption Capacity Tests on Composite Prefabricated Vertical Drains -- Stabilization of Clay at Sunnam Cheruvu Area in Nadergul, Hyderabad using Organic Waste -- The Tensile Strength Behavior of Lime Stabilized Soft Soil with Inclusion of Plastic Fiber -- Pullout Behaviour of Geosynthetics - a Review of Laboratory Testing Techniques -- Model Study on Cyclic Loading Responses of Flexible Pavement System Laid on Expansive Subgrade -- Evaluating the Strength Characteristics of Lime and Metakaolin Stabilized Expansive Soil -- Ground Improvement using Sand Columns to Mitigate Liquefaction - a Case Study -- Stabilization of Expansive Soil with Red Mud and Lime -- California Bearing Ratio and Permeability Behaviour of Fly Ash Reinforced with Geotextiles -- Influence of Granulated Blast Furnace Slag Contents on California Bearing Ratio Value of Clay Gbfs Mixture -- Geocell Reinforced Dense Sand Bases Overlying Weak Sand Subgrades Under Repeated Loading -- Load-Settlement Behaviour of Granular Pile on Cochin Marine Clay using Recycled Aggregate -- Transmissivity of Coir Latex Composite -- Influence of Combined Vertical and Horizontal Reinforcement on Granular Piles in Soft Clays -- Effect of Ggbs and Lime on the Strength Characteristics ofBlack Cotton Soil -- Soil Improvement using Microbial: a Review -- Long Term Strength Studies on Natural Fibre Composite (N-F-C) Sheets for Use as Separator in Flexible Pavements in Terms of CBR Values -- Coefficient of Consolidation for Vertical and Radial Drainage -- Comparative Analysis of Strength Characteristics of Soil Reinforced with Coir and Polypropylene Fibers -- Geo-Engineering Properties of Sedimented Flyash Bed Stabilized by Chemical Columns -- A Short Review of Geosynthetic Granular Column Treatment of Soft Clay Soils -- Engineered Anti Erosion Works Along the Right Bank of Jiabharali River in Assam -- Static and Cyclic Properties of Eps Geofoam -- Swell Behavior of Expansive Soils with Stabilized Fly Ash Columns.…”
Full-text access
OPAC'ta görüntüle

Rare Metal Technology 2019

Full-text access
OPAC'ta görüntüle

Rare Metal Technology 2018

Full-text access
OPAC'ta görüntüle

Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017)

İçindekiler: “…An Attempt to Integrate Software Tools at Microscale and Above Towards an ICME Approach for Heat Treatment of a DP Steel Gear with Reduced Distortion -- Integrated Microstructure based Modelling of Process-Chain for Cold Rolled Dual Phase Steels -- Improving Manufacturing Quality using Integrated Computational Materials Engineering -- ICME Based Hierarchical Design Using Composite Materials for Automotive Structures -- Towards Bridging the Data Exchange Gap Between Atomistic Simulations and Larger Scale Models -- A Flowchart Scheme for Information Retrieval in ICME settings -- An Ontological Framework for Integrated Computational Materials Engineering -- European Materials Modelling Council -- Facilitating ICME through Platformization -- Bridging the Gap between Bulk Properties and Confined Behavior using Finite Element Analysis -- Ontology Dedicated to Knowledge-driven Optimization for ICME Approach -- Integration of Experiments and Simulations to Build Material Big-Data -- ICME-based Process and Alloy Design for Vacuum Carburized Steel Components with High Potential of Reduced Distortion -- Study of Transient Behavior of Slag Layer in Bottom Purged Ladle: A CFD Approach -- Developing Cemented Carbides through ICME -- CSUDDCC2: An Updated Diffusion Database for Cemented Carbides -- Multi-Scale Modeling of Quasi-Directional Solidification of a Cast Si-rich Eutectic Alloy -- Numerical Simulation of Macrosegregation in a 535 Tons Steel Ingot with a Multicomponent-Multiphase Model -- Validation of CAFE Model with Experimental Macroscopic Grain Structures in a 36-ton Steel Ingot -- Analysis of Localized Plastic Strain in Heterogeneous Cast Iron Microstructures using 3D Finite Element Simulations -- An Integrated Solidification and Heat Treatment Models for Predicting Mechanical Properties of Cast Aluminum Alloy Component -- Linked Heat Treatment and Bending Simulation of Aluminum Tailored Heat Treated Profiles -- Numerical Simulation of Meso-micro structure in Ni-based Superalloy during Liquid Metal Cooling Process -- Multiscale Simulation of \\945-Mg dendrite growth via 3D Phase Field Modeling and Ab-initio First Principle Calculations -- Macro- and Micro-simulation and Experiment Study on Microstructure and Mechanical Properties of Squeeze Casting Wheel of Magnesium Alloy -- Solidification Simulation of Fe-Cr-Ni-Mo-C Duplex Stainless Steel using CALPHAD-coupled Multi-phase-field Model with Finite Interface Dissipation -- Phase-field Modeling of θ' Precipitation Kinetics in W319 Alloys -- Hybrid Hierarchical Model for Damage and Fracture Analysis in Heterogeneous Material -- Fatigue Performance Prediction of Structural Materials by Multi-Scale Modeling and Machine Learning -- Nano Simulation Study of Mechanical Property Parameter for Microstructure-based Multiscale Simulation -- Multiscale, Coupled Chemo-mechanical Modeling of Bainitic Transformation during Press Hardening -- Development of Microstructure-based Multiscale Simulation Process for Hot Rolling of Duplex Stainless Steel -- A Decision-Based Design Method to Explore the Solution Space for Microstructure after Cooling Stage to Realize the End Mechanical Properties of the Rolled Product -- Influence of Computational Grid and Deposit Volume on Residual Stress and Distortion Prediction Accuracy for Additive Manufacturing Modeling.…”
Full-text access
OPAC'ta görüntüle