Arama Sonuçları - solid start press,~

High-solid and Multi-phase Bioprocess Engineering Theory and Practice / Yazar: Chen, Hongzhang

Full-text access
OPAC'ta görüntüle

Nanostructured Materials for Next-Generation Energy Storage and Conversion Fuel Cells /

İçindekiler: “…Fuel Cell Technology - Policy, Features, and Applications: A Mini-Review -- Concept of Hydrogen Redox Electric Power and Hydrogen Energy Generators -- Evaluation of Cell Performance and Durability for Cathode Catalysts (Platinum Supported on Carbon Blacks or Conducting Ceramic Nanoparticles) During Simulated Fuel Cell Vehicle Operation: Start-up / Shutdown Cycles and Load Cycles -- Metal Carbonyl Cluster Complexes as Electrocatalysts for PEM Fuel Cells -- Non-Carbon Support Materials Used in Low-Temperature Fuel Cells -- Noble Metal Electrocatalysts for Anode and Cathode in Polymer Electrolyte Fuel Cells -- Nano Materials in Proton Exchange Membrane Fuel Cells -- Nanostructured Electrodes for High-Performing Solid Oxide Fuel Cells -- Modelling Analysis for Species, Pressure, and Temperature Regulation in Proton Exchange Membrane Fuel Cells -- The Application of Computational Thermodynamics to the Cathode-Electrolyte in Solid Oxide Fuel Cells -- Application of DFT Methods to Investigate Activity and Stability of Oxygen Reduction Reaction Electrocatalysts -- Hydrogen Fuel Cell as Range Extender in Electric Vehicle Powertrains: Fuel Optimization Strategies -- Totalized Hydrogen Energy Utilization System -- Influence of Air Impurities on the Performance of Nanostructured PEMFC Catalysts -- Solid-State Materials for Hydrogen Storage -- Stress Distribution in PEM Fuel Cells. …”
Full-text access
OPAC'ta görüntüle

Light Metals 2019

İçindekiler: “…Aluminum Alloys, Processing and Characterization -- Grain Boundary Precipitation and Fracture Behavior of Al-Cu-Li Alloys -- Comparison of Texture and Surface Finish Evolution during Single Point Incremental Forming and Formability Testing of AA 7075 -- Understanding the Co-precipitation Mechanisms of Al3(Sc, Zr) with Strengthening Phases in Extruded Al-Cu-Li Model Alloys -- Determining a Retrogression Heat Treatment to Apply during Warm Forming of a High Strength AA7075 Sheet Material -- Development of High-strength and High-electrical-conductivity Aluminum Alloys for Power Transmission Conductors -- The Combined Effects of Sr Additions and Heat Treatment on the Microstructure and Mechanical Properties of High Pressure Die Cast A383 Alloy -- Influence of Additional Elements (Si Ti and B) on the Castability, Corrosion and Mechanical Properties of A201 Alloys -- Effect of Ni Addition on the Solidification Process and Microstructure of Al-12%Si-4%Cu-1.2%Mn-x%Ni Heat-resistant Alloys -- Phase Formation of Monotectic Al-In and Al-Ga-In Alloys and Implications Thereof -- Investigations on Pb-free 6000 Series Aluminum Alloy for Machining Applications -- Optimization in Novel Partial-solid High Pressure Aluminum Die Casting by Taguchi Method -- Application of the Hot Stamping Process to Aluminum Alloy Structural Components -- Failure of 5000 and 6000 Series Aluminum Alloys in Modular Wastewater Treatment Aeration Tanks -- Grain Refinement of Al-Si-Mg Cast Alloys by Al3Ti3B Master Alloy -- Improving Bendability of Al-Mg-Si Alloy Sheet by Minor Alloying Element Addition -- Deep Drawing and Anodizing Quality Improvement in AA3003-O Alloy by Optimization of Homogenization, Rolling and Annealing -- Understanding Large-strain Softening of Aluminum in Shear at Elevated Temperature -- Assessments of Sc-containing Ternary Systems Al-Sc-Ti and Al-Sc-Zr within the Thermodynamic Database for Aluminium Alloys, TCAL5 -- Multiscale Model for Al-Li Material Processing Simulation under Forging Conditions -- Investigation of Effect of Aging Treatment on Deformation Behavior of Al-Mg-Si Alloy Using Quasi-2D Polycrystalline Sample -- Development of Innovative Aluminum Alloys with High Mechanical Properties -- A General Formulation of Eutectic Silicon Morphology and Processing History -- Evaluation of Hot Tearing Susceptibility of 6000 Series Aluminum Alloys Using Constrained Solidification Test -- In-situ Fitness-for-Service Assessment of Aluminum Alloys Developed for Automotive Powertrain Lightweighting -- Research on the Effect of the Processing Parameters on Susceptibility of Liquation Cracking of Al Alloys during Refilled Friction Stir Spot Welding -- Factors Influencing the Cast Duration of Horizontal Continuous Ingot Casters -- On Si Redistribution during Friction Stir Processing of Cast Al-7%Si-0.4%Mg Alloys -- Equal Channel Angular Pressing of a Newly Developed Precipitation Hardenable Scandium Containing Aluminum Alloy -- Stiffness Improvement Through Alloying Elements in Al Alloys -- Formation Mechanism of Surface Segregation in Heated Mold Continuous Casting Al-Cu Alloy -- Effects of Extrusion and Heat Treatment Conditions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu-Er Alloy -- Effects of Rare Earth Er Additions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy -- Part 3. …”
Full-text access
OPAC'ta görüntüle

Light Metals 2018

İçindekiler: “…Aluminum Alloys, Processing and Characterization -- Grain Boundary Precipitation and Fracture Behavior of Al-Cu-Li Alloys -- Comparison of Texture and Surface Finish Evolution during Single Point Incremental Forming and Formability Testing of AA 7075 -- Understanding the Co-precipitation Mechanisms of Al3(Sc, Zr) with Strengthening Phases in Extruded Al-Cu-Li Model Alloys -- Determining a Retrogression Heat Treatment to Apply during Warm Forming of a High Strength AA7075 Sheet Material -- Development of High-strength and High-electrical-conductivity Aluminum Alloys for Power Transmission Conductors -- The Combined Effects of Sr Additions and Heat Treatment on the Microstructure and Mechanical Properties of High Pressure Die Cast A383 Alloy -- Influence of Additional Elements (Si Ti and B) on the Castability, Corrosion and Mechanical Properties of A201 Alloys -- Effect of Ni Addition on the Solidification Process and Microstructure of Al-12%Si-4%Cu-1.2%Mn-x%Ni Heat-resistant Alloys -- Phase Formation of Monotectic Al-In and Al-Ga-In Alloys and Implications Thereof -- Investigations on Pb-free 6000 Series Aluminum Alloy for Machining Applications -- Optimization in Novel Partial-solid High Pressure Aluminum Die Casting by Taguchi Method -- Application of the Hot Stamping Process to Aluminum Alloy Structural Components -- Failure of 5000 and 6000 Series Aluminum Alloys in Modular Wastewater Treatment Aeration Tanks -- Grain Refinement of Al-Si-Mg Cast Alloys by Al3Ti3B Master Alloy -- Improving Bendability of Al-Mg-Si Alloy Sheet by Minor Alloying Element Addition -- Deep Drawing and Anodizing Quality Improvement in AA3003-O Alloy by Optimization of Homogenization, Rolling and Annealing -- Understanding Large-strain Softening of Aluminum in Shear at Elevated Temperature -- Assessments of Sc-containing Ternary Systems Al-Sc-Ti and Al-Sc-Zr within the Thermodynamic Database for Aluminium Alloys, TCAL5 -- Multiscale Model for Al-Li Material Processing Simulation under Forging Conditions -- Investigation of Effect of Aging Treatment on Deformation Behavior of Al-Mg-Si Alloy Using Quasi-2D Polycrystalline Sample -- Development of Innovative Aluminum Alloys with High Mechanical Properties -- A General Formulation of Eutectic Silicon Morphology and Processing History -- Evaluation of Hot Tearing Susceptibility of 6000 Series Aluminum Alloys Using Constrained Solidification Test -- In-situ Fitness-for-Service Assessment of Aluminum Alloys Developed for Automotive Powertrain Lightweighting -- Research on the Effect of the Processing Parameters on Susceptibility of Liquation Cracking of Al Alloys during Refilled Friction Stir Spot Welding -- Factors Influencing the Cast Duration of Horizontal Continuous Ingot Casters -- On Si Redistribution during Friction Stir Processing of Cast Al-7%Si-0.4%Mg Alloys -- Equal Channel Angular Pressing of a Newly Developed Precipitation Hardenable Scandium Containing Aluminum Alloy -- Stiffness Improvement Through Alloying Elements in Al Alloys -- Formation Mechanism of Surface Segregation in Heated Mold Continuous Casting Al-Cu Alloy -- Effects of Extrusion and Heat Treatment Conditions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu-Er Alloy -- Effects of Rare Earth Er Additions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy -- Part 3. …”
Full-text access
OPAC'ta görüntüle

31st International Symposium on Shock Waves 2 Applications /

İçindekiler: “…Chapter1.Strength and Frequency of Underwater Shock Waves Related to Sterilization Effects on a Marine Bacterium -- Chapter2.Effects of Liquid Impurity on Laser-Induced Gas Breakdown in Quiescent Gas: Experimental and Numerical Investigations -- Chapter3.Air Blast from a Structural Reactive Material Solid -- Chapter5.Experimental study on Configuration Effects of Supersonic Projectiles in Transitional Ballistic Regimes -- Chapter6.Non-Ideal Blast Waves from Particle-Laden Explosives -- Chapter7.Attenuation of Blast Wave in a Duct with Expansion Region (Effects of configuration, porous panel, and acoustic material) -- Chapter8.Enhancement of Deflagration-to-Detonation Transition Process with Energetic Solid Particle -- Chapter9.Large Scale Computation of Direct Initiation of Cylindrical Detonations -- Chapter10.Numerical Study on a Cycle of Liquid Pulse Detonation Engines -- Chapter11.Experimental investigate on the flame-shock wave interaction and pressure oscillation in a confined combustion chamber -- Chapter12.The Influence of Spatial Heterogeneity in Energetic Material on Non-ideal Detonation Propagation -- Chapter13.Detonation Experiment Research of Gaseous Mixtures with Suspended Metal Particles -- Chapter14.Large Eddy Simulation of Mixing Characteristic in the Cold Rotating-Detonation Chamber -- Chapter15.Research on the Continuous Rotating Detonation Wave in a Hollow Chamber with Laval Nozzle -- Chapter16.Experimental Study on a Long Duration Operation of a Rotating Detonation Engine -- Chapter17.Decaying modes of propagation of spinning detonation and flame front in narrow channel -- Chapter18.Measurement of gaseous fuel concentration in rotating detonation engines -- Chapter19.Investigation of High-Frequency Pulse Detonation Cycle with Fuel Phase Transition -- Chapter20.Simulations of Hydrogen Detonation in Vibrational Non-equilibrium -- Chapter21.Aerodynamic Force Measurement in a Large-Scale Shock Tunnel -- Chapter22.Trial Implementation of TiN Surface Coating for a Main Piston Towards Reducing the Opening Time for a Diaphragmless Driver Section -- Chapter23.Aerodynamic Force Measurement Techniques in JF12 Shock Tunnel -- Chapter24.Optimising the X3R Reflected Shock Tunnel Free-Piston Driver for Long Duration Test Times -- Chapter25.Development and Analysis of an Apollo Earth Re-entry Condition with Representative Post-shock Reynolds Number in the X2 Expansion Tunnel -- Chapter26.Liquid-Coupled Dual Piston Driver for Small-Scale Shock Tubes -- Chapter27.Initial testing of a 2m Mach-10 free piston Shock tunnel at CAAA -- Chapter28.CFD Evaluation and Experiment test of the Running time of the Hypersonic Ludwieg Tube Quiet Wind Tunnel -- Chapter29.Development and Performance Study of Shock Tube with Extended Test-times for Materials Research -- Chapter30.Measurement of Temperature Field around Spiked Bodies at Hypersonic Mach Numbers -- Chapter31.Three-dimensional Laser Interferometric CT density measurement of unsteady flow field around a cylinder induced by discharged shock wave from a cylindrical nozzle -- Chapter32.Curved shock wave propagation in environmental stratosphere by laser ablation -- Chapter33.Hypervelocity tests with a detonation driven expansion tube -- Chapter34.Experiments in HEG related to sonic line and shock stand-off distance on capsule shapes -- Chapter35.Catalytic Recombination Characteristics of Atomic Oxygen on Material Surfaces by Optical Emission Spectroscopy -- Chapter36.Influence of Dual Ignition on Test Conditions of a High Enthalpy Shock Tunnel -- Chapter37.Ablation Measurements in A Low Density Heat Shield Using Ablation Sensor Unit -- Chapter38.The Development of High Enthalpy Reentry Conditions in the X3 Expansion Tube -- Chapter39.Prediction of Intensity Profiles behind a Shock Wave Travelling in Air at Speeds Exceeding 12 km/s -- Chapter40.Revisiting temperature measurements at the focus of spherically converging shocks in argon -- Chapter41.Influence of Matrix Resin on Impact Resistance of CFRP by a SmallSphere -- Chapter42.Improvement of Impact Resistance of Ceramics by using Resin-based Materials -- Chapter43.Measurement of Plasma Formed by High-speed Impact to Estimate Temperature at Impact Point -- Chapter44.Application of Riemann Solver for Compressible and Non-Expanding Fluid to Impact on Regolith -- Chapter45.Mathematical modeling of the impact of high-speed metallic plates -- Chapter46.Study of Shock Impact Pressure Amplification and Attenuation of Acoustic Waves in E-Glass Material -- Chapter47.Reconstruction of Recoilless Weapon Blast Environments Using High-fidelity Simulations -- Chapter48.Contribution of Cavitation Generation to Shock Wave Sterilization Effects in a Narrow Water Chamber -- Chapter49.Shockwaves confer immunity against infections in mice -- Chapter50.On the relation between the shock wave thickness in bio-materials and the threshold for blast induced neuro-trauma -- Chapter51.Development of a miniaturized focused shock wave generator for medical application -- Chapter52.Intracellular Ca2+ Increase Evoked by Single Acoustic Pulses -- Chapter53.A new device for crossing chronic total occlusions -- Chapter54.Medical application of shock waves: Developing the treatment application and understanding of injury -- Chapter55.Towards non-invasive insulin injection via control of the electrical breakdown in liquid -- Chapter56.Current Trend in Cell Membrane Manipulation by Ultrasound and Underwater Shock Wave -- Chapter57.Analysis of Deformation Process of a Bubble in an Elastic Capsule by Shock Waves and Their Medical and Biological Applications -- Chapter58.Shockwaves can cure biofilm infections in-vivo in combination with antibiotics -- Chapter60.Simulation of shock-bubbles interaction using a four-equation homogeneous model -- Chapter61.A Study of Dispersion, Vaporization, and Combustion of Burnable Liquids Surrounding Charges -- Chapter62.Multi-scale simulation of the interaction of a shock wave and a cloud of particles -- Chapter63.Surface Jetting Induced by Explosion in Liquid below an Immersed Bubble -- Chapter64.Generation Frequency of Rebound Shock Waves from Bubble Collapses in Cavitation Jet -- Chapter65.Experimental Study on the Influence of Underwater Explosion Depth on the Disintegration of Thin Resin Plate Attached Microbubbles -- Chapter66.Numerical Study of the Flow Separation in a Rocket Nozzle -- Chapter67.Hybrid RANS/LES simulation of shock-induced separated flow in truncated ideal contour nozzle -- Chapter68.Experimental Study of TICTOP Nozzles -- Chapter69.Three-Dimensional Instability of Shock-Wave/Boundary- Layer Interaction for Rocket Engine Nozzle Applications -- Chapter70.Shock interactions in Thrust Optimized Parabolic (TOP) Nozzles during Start-Up and Shut Down -- Chapter71.Shock System Deformation in High Mach Number Rocket Nozzles -- Chapter72.Interaction of Droplets with Incident Shock Waves -- Chapter73.A compact finite volume method for computing shock waves on hybrid grids -- Chapter74.Numerical Modelling of the Effects ofSurface Roughness on Blunt Body Heat Transfer.…”
Full-text access
OPAC'ta görüntüle

Shock and Materials Yazar: Batsanov, Stepan S.

Full-text access
OPAC'ta görüntüle

Small-Angle Scattering from Confined and Interfacial Fluids Applications to Energy Storage and Environmental Science / Yazar: Melnichenko, Yuri B.

Full-text access
OPAC'ta görüntüle