Arama Sonuçları - strength and conditioning coach~

IIW Recommendations for the HFMI Treatment For Improving the Fatigue Strength of Welded Joints / Yazar: Marquis, Gary B., Barsoum, Zuheir

Full-text access

Social constructivist teaching affordances and constraints /

Full-text access

Fracture Mechanics of Piezoelectric Solids with Interface Cracks Yazar: Govorukha, Volodymyr, Kamlah, Marc, Loboda, Volodymyr, Lapusta, Yuri

Full-text access

8th RILEM International Conference on Mechanisms of Cracking and Debonding in Pavements

İçindekiler: “…Mensching et al. -- Effect of Heavy Traffic Loading on Predicted Pavement Fatigue Life, by Dinegdae Yared et al. -- Effect of temperature and traffic speed on the asphalt moduli for fatigue cracking and pavement structural design considerations, by Didier Bodin et al. -- Flexural Properties of Cemented Granular Materials for Pavement Design, by Sounthararajah Arooran et al. -- Mechanistic Evaluation of the Long Term Performance Characteristics of Warm Mix Additives in Modified Asphalt Mixtures, by Chamoun Zahi et al. -- Performance assessment of JPCP and CRCP rigid pavements implementing M-E analysis, by Agostinacchio Michele et al. -- Weak Interlayers found in Flexible and Semi-Flexible Road Pavements, by De Beer Morris -- EME2 Fatigue Properties and Pavement Design in a Sub-Tropical Climate, by Petho Laszlo et al. -- Comparative Assessment of Pavement Fatigue Life Prediction Approaches for Use in Performance-Related Specification, by Oshone Mirkat et al. -- Coupling a multi-linear fatigue model and a viscoelastic pavement model to estimate truck aggressiveness, by Homsi Farah et al -- Prediction of Thermally-induced Reflective Cracking using Full-scale Test Data, by Yin Hao -- Part II - Interface debonding behavior -- Bond Characterization -- Influence of specimen dimension and test speed on the shear strength of bituminous interfaces, by Abuaddous Musab et al. -- Investigation Of The Impact Of Conditions Of Application Of Tack Coats On The Interlayer Bond Strength, by Destrée Alexandra et al. -- Damage modeling of asphaltic pavement rough interfaces under tensile and shear loading, by Ktari Rahma et al. -- Effect of reinforced asphalt pavements on reflective crack propagation and interlayer bonding performance, by Raab Christiane et al. -- Role of Concrete-Asphalt Interface in Bonded Concrete Overlays of Asphalt Pavements, by Mateos Angel et al.…”
Full-text access

Advances in Direct Methods for Materials and Structures

Full-text access

Fib model code for concrete structures 2010 /

Full-text access

Fractal Approach to Tribology of Elastomers Yazar: Janahmadov, Ahad Kh, Javadov, Maksim

Full-text access

Advances in Manufacturing Technology Select Proceedings of ICAMT 2018 /

İçindekiler: “…-Investigations on Corrosion Behaviour of Aa 8011 -Zrb2 In-Situ Metal Matrix Composites -- Introducing Various Image Processing Techniques to Improve Topology Optimization Process to Develop Compliant Mechanism Based Micro Gripper -- Study on Tensile Strength of Glass Fiber Reinforced Nanocomposites by Vartm -- Investigations on Wire Spark Erosion Machining Of Aluminium Based Metal Matrix Composites -- Optimization of Coefficient Of Friction for Direct Metal Laser Sintered Inconel 718 -- Experimental and Numerical Investigation on Incremental Forming of Is513cr3 -- Modelling Of Support Vector Mechanism For Green Manufacturability Quantification of Production -- Experimental Study on Surface Roughness and Optimization of Process Parameters Using Ann-Ga in Milling of Super Duplex Stainless Steel Under Dry and Wet Conditions -- Experimental Study On Tool Wear And Optimization of Process Parameters Using Ann-Ga In Turning Of Super Duplex Stainless Steel Under Dry And Wet Conditions -- Multi Response Optimization Using Grey Relation Analysis in Mechanical Micro Drilling (Mmd) Of Titanium - Grade 2 (Cp-Ti G2) -- A Glance Through History Of Automobile Industry & Current Market Study Of Some Of The Legendry Models In India -- Effect of Twist Angle and Rpm on the Natural Vibration of Composite Beams Made Up Of Hybrid Laminates.…”
Full-text access

Geotechnical Characterisation and Geoenvironmental Engineering IGC 2016 Volume 1 /

İçindekiler: “…THEME 1 : CHARACTERIZATION OF SOILS, ROCKS AND SYNTHESIZED MATERIALS -- Static Compaction Test and Determination of Equivalent Static Pressure -- Effect of Confining Pressure on Post Peak Behaviour of Igneous Rock -- Utility of Lime and Red Mud in Clay Soil Stabilization -- Geotechnical Characterization of Construction and Demolished (C&D) Waste -- Light Weight Deflectometer as a Compaction Quality Control Device -- A Study on Compressibility, Swelling and Permeability Behaviour of Bentonite- Sand Mixture -- Effect of Fines on Shear Strength of Sands -- Effect of Constant Energy Source on Coherence Function in Spectral Analysis of Surface Waves (SASW) Testing -- Comparison of Properties of Cohesive Soils Along East Coast of India -- Effect of Pore Size Distribution on Unconfined Compressive Strength -- Synthesis of Fly Ash-GGBS Blended Geopolymer Composites -- Local Strain Measurements in Triaxial Tests using On-Sample Transducers -- Geotechnical Characterization of Hill Slope Soils of Guwahati Region -- Effect of Box Size on Dilative Behaviour of Sand in Direct Shear Test -- THEME 4: GEOENVIRONMENTAL ENGINEERING AND BEHAVIOUR OF UNSATURATED SOILS -- Influence of Initial Conditions on Undrained Response of Soft Clays -- A Methedology to Determine Water Vapour Diffusion Characteristics of Geomaterials -- Atterberg Limits of Sand-Bentonite Mixes and the Influnce of Sand Composition -- Effect of Sample Thickness on Laboratory Determination of Gas Permeability of Buffer Material -- Biominerlisation as a Remediation Technique: a Critical Review -- Biopolymer Modified Soil: Prospects of a Promising Green Technology -- Factors Influencing Zeta Potential of Clayey Soils -- Experimental Analysis of Salt Diffusion in Compacted Clays by Through Diffusion and Half-Cell Technique -- A Study on Influence of pH and Organic Chemical on Adsorption Capacity of Red Earth -- Effect of Induced Osmotic Suction on Swell and Hydraulic Conductivity of an Expansive Soil -- Attenuation Characteristics of Laterite - Fly Ash - Bentonite Mix as Liner -- An Experimental Investigation on the Geoengineering Properties of Pond Ash-Bentonite Mixes -- Influence of Engineering Behaviour of Coal Ash on Design of Ash Dykes -- Virus Transport Through Heterogeneous Unsaturated Zone in Guwahati City in Assam Under Transient State Condition -- Behaviour Thresholds of Quarry-Dust Bentonite Mixes -- Index and Shear Strength Properties of Clay Soil Contaminated by Tannery Effluent -- Effect of pH on the Geotechnical Properties of Kaolinitic and Montmorillonitic Clay -- Influence of Geomembrane Stiffness on the Integrity of Landfill Covers: Centrifuge Modeling -- Studies on Desiccation Cracking Behaviour of Geofiber Reinforced Clay -- Shear Strength Parameters of Granite Rock-Mass: a Case Study -- Effects of Gypsum on Strength Behaviour of Lime Modified Pond Ash as an underground Stowing Material -- Stress-Dilatancy Relation of Sea Deposits Off Mumbai Coast -- Evaluation of Soil Parameters by using Light Cone Penetrometer.…”
Full-text access

Fatigue and Fracture of Fibre Metal Laminates Yazar: Alderliesten, René

Full-text access

Sustainable Construction and Building Materials Select Proceedings of ICSCBM 2018 /

İçindekiler: “…Experimental Study on Self Compacting Concrete with Replacement Material's -- Performance of Nano-Sio2 and Nano-Zno2 on Compressive Strength and Microstructure Characteristics of Cement Mortar -- Fly Ash Utilization In Lightweight Aggregates For Sustainable Construction -- Strength Behaviour of Masonry Blocks Produced Using Green Concrete -- Interference of Two Shallow Square Footings on Geogrid Reinforced Crusher Dust -- Use of Foundry Sand As Partial Replacement of Natural Fine Aggregate For The Production of Concrete -- Construction Blocks From C&D Debris Using The Innovative Co2 Sequestration Technique -- Durability Studies on Alkali Activated Fly Ash and Ggbs Based Geopolymer Mortars -- A Comparative Study on Rcc Structures (Frame, Infill, Bracings, Wire Frame and Shear Wall) -- Comparative Study on Influence of Lead Rubber Bearing on Rc Structures with Flat Slab and Conventional Slab System Under Seismic Loading -- Corrosion Inhibitors Behaviour on reinforced concrete - A Review -- A Reviewof The Mechanical Behavior of Substitution Materials In Self-Healing Concrete -- Effect of Silica Fume on The Properties of Fly Ash Geopolymer Concrete -- Synthesis of Geo-Polymer Coarse Aggregates Using Class-F Fly Ash and Studies on Its Physical Properties -- Optimization of Resources by Real Time Correlation Study For Maximizing The Productivity -- Study on Mechanical Properties of Cement Concrete For Partial Replacement of Coarse Aggregate by Shredded Plastic and Cement by Fly Ash and Meta-Kaolin -- High Performance Concrete (Hpc) - An Innovative Cement Concrete Mix Design To Increase The Life Span of Structures -- Study on Mechanical Properties and Leaching of Heavy Metals In The Artificial Produced Fly Ash Aggregates -- Feasibility of Producing Class F Fly Ash Geopolymer Mortar with Alkaline Water Containing Sodium Carbonate (Na2co3) -- Analytical Study on Disintegration of Concrete -- An Effect of Naoh Molarity on Flyash - Metakaolin Based Self Compacting Geopolymer Concrete -- A Reviewon Performance of Geopolymer In Concrete -- An Experimental Study on Workability and Strength Characteristics of M40 Grade Concrete by Partial Replacement of Cement with Nano Tio2 -- Studies on Fresh and Hardened Properties of Sugarcane Bagasse Ash Blended Self Compacting Concrete Mixes -- Experimental Study on Improvement of Bearing Capacity Using Geosynthetic Stone Column -- Analysis and Modeling of Labor Productivity Using System Dynamics Approach In Construction Projects -- Implication of Concrete with Chemical Admixture Cured In Low Temperature on Strength, Chloride Permeability and Microstructure -- Experimental Investigation on The Properties of Pervious Concrete Over Fibre Reinforced Pervious Concrete -- Role of Silica Fume In Producing High Strength Self-Compacting Concrete -- Problem Analysis and Geotechnical Study At Sengulam Augmentation Scheme -- Graphene In The Domain of Construction: A Review of Applications and Prospects -- Experimental Analysis on Partial Replacement of Fine Aggregate by Granite Dust In Concrete -- Experimental Investigation of High Strength Self-Compacting Fibre Reinforced Concrete -- Effect of Curing Conditions on Mechanical Properties of Reactive Powder Concrete with Different Dosage of Quartz Powder -- The Effects of Ggbfs on Strength Properties of Geopolymer Concrete Cured At Ambient Temperature -- Experimental and Finite Element Analysis of 80mpa Two-Span High-Performance Concrete Beam Under Flexure -- Techniques For Preparation and Dispersion of Nano- Sio2 In Cementitious System - A Review -- Life Cycle Costing For The Analysis of Cost-Effectiveness of Alternative Concretes and Masonry Blocks -- Study on Development of Strength Properties of Bio- Concrete -- Rice Husk Ash (Rha) - The Future of Concrete -- Effect of Nano-Silica and Ggbs on The Strength Properties of Fly Ash-Based Geopolymers -- Compressive Strength Prediction of High Strength Concrete Using Regression and Ann Models -- Prediction of Compressive Strength of High Volume Fly Ash Concrete Using Artificial Neural Network -- Experimental Investigation on Compressive Strength of Ld Slag Aggregate Concrete -- Cost Reduction Techniques on Mep Projects -- Mineralogical Study of Concretes Prepared Using Carbonated Fly Ash As Part Replacement of Cement -- Effect of Supplementary Cementitious Materials on Mechanical Properties and Thermal Conductivity of Concretes and Masonry Blocks -- Mechanical Properties of Pavement Quality Concrete Produced with Reclaimed Asphalt Pavement Aggregates -- Effect of Partial Replacement of Coarse Aggregates with E-Waste on Strength Properties of Concrete -- Experimental Investigation on Utilization of Waste Shredded Rubber Tire As A Replacement To Fine Aggregate In Concrete -- Strength Characteristics of Laterized Mortars Using Processed Laterite -- Sustainable Building Management by Using Alternative Materials and Techniques -- Effect of Silica Fume on Fly-Ash Based Geopolymer Mortar with Recycled Aggregates -- Mechanical Properties of Fibre Reinforced Concrete with Bottle Crown Caps As Fibres -- Performance of Deep Excavation For An Underground Metro Station Constructed by Top-Down Method - A Case Study -- Experimental Investigation on The Strength of Concrete by Partial Replacement of Fine Aggregates by Low Density Shredded Polyethylene -- Experimental Study on Performance of M30 Grade Concrete by Partial Replacement with Fly-Ash and Granite Powder -- Combined Effect of Marine Environment and Ph on The Impedance of Reinforced Concrete Studied by Electrochemical Impedance Spectroscopy -- Study on Effect of Sodium Hydroxide Concentration on Geopolymer Mortar -- Early Cost Estimation of Highway Projects In India Using Artificial Neural Network -- Review Paper on Utilization Potential of Rice Husk Ash As Supplementary Cementitious Material -- Replacement of Fine Aggregates by Recycled Construction and Demolition Waste In Pavement Quality Concrete -- Fresh and Hardened Properties of Self-Consolidating Concrete Incorporating Alumina Silicates.…”
Full-text access

Fracture, Fatigue, Failure and Damage Evolution, Volume 7 Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /

İçindekiler: “…Chapter 1.Interface Mechanical Strength and Elastic Constants Calculations via Nano Impact and Nanomechanical Raman Spectroscopy -- Chapter 2.Effect of Strain Rate and Interface Chemistry on Failure in Energetic Material -- Chapter 3.Characterization of Crack Tip Plasticity in IN-617 Using Indentation and Nano-mechanical Raman Spectroscopy -- Chapter 4.The Two-Way Relationship between Residual Stress and Fatigue/Fracture -- Chapter 5.Designing Brittle Fracture Specimens to Investigate Environmentally Assisted Crack Growth -- Chapter 6.Flexible Energy Harvesting/Storage Structures for Flapping Wing Air Vehicles -- Chapter 7.The Influence of Formulation Variation and Thermal Boundary Conditions on the Near-Resonant Thermomechanics of Mock Explosives -- Chapter 8.Detecting Fatigue Crack Closure and Crack Growth Delays after an Overload Using DIC Measurements -- Chapter 9.In-situ Observation of Damage Evolution in Quasi-Isotropic CFRP Laminates -- Chapter 10.Contamination-induced Degradation/Enhancement of Interfacial Toughness and Strength in Polymer Matrix Composite Interfaces -- chapter 11.Simultaneous Extraction of Mixed-Mode Traction-Separation Relations -- Chapter 12.Damage Evolution in 304L Stainless Steel Partial Penetration Laser Welds -- Chapter 13.Cross-axis Coupling and Phase Angle Effects due to Multiaxial Vibration -- Chapter 14.Behavior of Steel-Concrete Composite Beams under Fatigue Loads -- Chapter 15.Studying the Fracture of Tropical Wood Species with the Grid Method -- Chapter 16.Generalization of Integral Parameters to Fatigue Loading in Room Temperature -- Chapter 17.Fracture Behavior of Unidirectional Composites Analyzed by Acoustic Emissions Technique.…”
Full-text access

In-Service Fatigue Reliability of Structures Yazar: Petinov, Sergei V.

Full-text access

Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors

İçindekiler: “…PWR Nickel SCC - SCC -- Scoring Process for Evaluating Laboratory PWSCC Crack Growth Rate Data of Thick-wall Alloy 690 Wrought Material and Alloy 52, 152, and Variant Weld Material -- Applicability of Alloy 690/52/152 Crack Growth Testing Conditions to Plant Components -- SCC of Alloy 152/52 Welds Defects, Repairs and Dilution Zones in PWR Water -- NRC Perspectives on Primary Water Stress Corrosion Cracking of High-chromium, Nickel-based Alloys -- Stress Corrosion Cracking of 52/152 Weldments near Dissimilar Metal Weld Interfaces -- Composite Material Stress Corrosion Crack Arrest Testing in Hydrogen Deaerated Water -- Investigation of Hydrogen Behavior in Relation to the PWSCC Mechanism in Alloy TT690 -- Part 2. …”
Full-text access

Dynamic Behavior of Materials, Volume 1 Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /

İçindekiler: “…Dynamic Tensile Behavior of a Quenched and Partitioned High Strength Steel Using a Kolsky Bar -- 24.Dynamic Flow Response of a Rigid Polymer Foam Subjected to Direct Impact -- 25.Differences in the Hydrostatic Implosion of Metallic andComposite Tubes Studied Using Digital Image Correlation -- 26.Novel Protection Mechanism of Blast and Impact Waves by Using Nanoporous Materials -- 27.Response of Materials Under Blast Loading -- 28.Using Richtmyer-Meshkov Instabilities to Estimate Metal Strength at Very High Rates -- 29.Study of Energy Contributions in Granular Materials during Impact -- 30.Ballistic Perforation of Double Reinforced Concrete as a Function of Energy -- 31.Identification Of The Dynamic Tensile Behavior Of Geomaterials Based on the Virtual Fields Method and a new Generation-Ultra-High-Speed Camera -- 32.Particle Size Reduction in Granular Materials During Rapid Penetration -- 33.Experimental Techniques to Characterize the Mechanical Behaviour of Ultra-high-strength-concrete Under Extreme Loading Conditions -- 34.Highly Stretchable Miniature Strain Sensor for Large Strain Measurement -- 35.Clamping-force Application for Kolsky bar Tension Grips -- 36.An Improved Technique for Reducing the Load Ringing Phenomenon in Tensile Tests at High Strain Rates -- 37.Experimental and Numerical Analysis of Pressure Waves Propagation in a Viscoelastic Hopkinson Bar -- 38.An Innovative Instrumented Projectile for Dynamic Testing  and Material Characterization.…”
Full-text access

International Congress on Polymers in Concrete (ICPIC 2018) Polymers for Resilient and Sustainable Concrete Infrastructure /

İçindekiler: “…-- Mechanical Properties of Polymer Cement - Fiber Reinforced Concrete (PC-FRC) - Comparison Based on Experimental Studies -- Environmental Temperature and Humidity Adaptability of Polymer Modified Cement Mortar -- Innovative Polymer-Modified Pervious Concrete -- Combined Methods to Investigate the Crack-Bridging Ability of Waterproofing Membranes -- Polymer Concrete for A Modular Construction System - Investigation of Mechanical Properties and Bond Behaviour by Means of X-Ray CT -- Bending and Crack Characteristics of Polymer Lattice-Reinforced Mortar -- The Influence of Specimen Shape and Size on The PCC Compressive Strength Values -- Long-term Investigation on the Compressive Strength of Polymer Concrete with Fly Ash -- Overlays: A Great Use for Polymer Concrete -- PC with Superior Ductility using Mixture of Pristine and Functionalized Carbon Nanotubes -- Contribution of Concrete-Polymer Composites and Ancient Mortar Technology to Sustainable Construction -- Smart Monitoring of Movement and Internal Temperature Changes Within Polymer Modified Concrete Repair Patches -- PIC: Does It Have Potential? …”
Full-text access

Energy Materials 2017

İçindekiler: “…Part 1: Energy and Environmental Issues in Materials Manufacturing and Processing: Opportunities in the Steel Industry -- Waste Energy Recovery Technology of Iron and Steel Industry in China -- Green Manufacturing Process of Shougang Jingtang Steel Plant -- The Introduction and Process Optimization Research of Oxygen Blast Furnace Ironmaking Technology -- Prediction and optimal scheduling of byproduct gases in steel mill: Trends and challenges -- Processing Non-Oriented Electrical Steels Using Inclined/Skew Rolling Schemes -- A Possible Way for Efficient Utilization of Coal Energy: The Combined Process of Ironmaking with Gasoline Synthesis and Electricity Generation -- The influence of water vapour on the fuming rate in a ferromanganese system -- Part 2: Energy and Environmental Issues in Materials Manufacturing and Processing: Opportunities in Aluminum Production, Waste Heat and Water Recovery -- Approach for pyrolysis gas release modelling and its potential for enhanced energy efficiency of aluminium remelting furnaces -- Numerical approach for the implementation of the interaction of pyrolysis gases and combustion products in an aluminium melting furnace -- Fluoropolymer Coated Condensing Heat Exchangers for Low-grade Waste Heat Recovery -- Nitrate and other anion removal from waste water using the Hydroflex technology -- Mechanical Analysis of Raceway Formation in Bulk Bed of Blast Furnace -- Part 3: Materials for Coal-Based Power: Materials For Coal-Based Power: Session I -- Ni-Fe based alloy GH984G used for 700 coal-fired power plant -- Part 4: Materials for Coal-Based Power: Materials For Coal-Based Power: Session II -- Creep strength and oxidation resistance of industrially made G115 Steel pipe -- Accelerated creep test for new steels and welds -- Part 5: Materials for Coal-Based Power: Materials For Coal-Based Power: Session IV -- The Reliability Analysis of 12Cr1MoVG and T23 Used for USC Boilers Water Wall -- Part 6: Materials for Coal-Based Power: Poster Session -- Effect of high-frequency induction hardening on stress corrosion of a 12% Cr martensitic stainless steel -- Fireside corrosion behaviors of Inconel 740 H superalloy in various SO2 contents -- High Cycle Fatigue Behavior of HAYNES282 Superalloy -- Recent Development in the Characteristics of Alloy 625 for A-USC Steam Turbine Castings -- Part 7: Materials for Gas Turbines: Coatings -- EVOLUTION OF THE THERMAL CONDUCTIVITY OF Sm2Zr2O7 UNDER CMAS ATTACK -- Part 8: Materials for Gas Turbines: Hot Corrosion and New Materials -- Development of a new high strength and hot corrosion resistant directionally solidified superalloy DZ409 -- Part 9: Materials for Gas Turbines: Microstructure and Processing -- Modeling the Diffusion of Minor Elements in Different MCrAlY - Superalloy Substrates at High Temperature -- ON HEALING MECHANISM OF CAST POROSITIES IN CAST NI-BASED SUPERALLOY BY HOT ISOSTATIC PRESSING -- The Influence of Dendritic Segregation Degree to the Recrystallization Nucleation in U4720LI -- Part 10: Materials for Gas Turbines: Poster Session -- Stress Rupture Properties of Alloy 783 -- Study on the Undercoolability and Single Crystal Castability of Nickel-Based Superalloys -- Part 11: Materials for Nuclear Energy: Materials for Nuclear Applications I -- Enhancing the High-Cycle Fatigue Property of 316 Austenitic Stainless Steels through Introduction of Mechanical Twins by Cold-Drawing -- Part 12: Materials for Nuclear Energy: Materials for Nuclear Applications II -- Microstructure Evolution of a Reactor Pressure Vessel Steel during High-temperature Tempering -- Part 13: Materials for Nuclear Energy: Environmental Effects -- Effect of Steam Pressure on the Oxidation Behaviour of Alloy 625 -- Friction Stir Processing of Degraded Austenitic Stainless Steel Nuclear Fuel Dry Cask Storage System Canisters -- Part 14: Materials for Nuclear Energy: Accident Tolerant Fuels & Irradiation Effects -- The Mechanical Response of Advanced Claddings during Proposed Reactivity Initiated Accident Conditions -- First principles investigations of alternative nuclear fuels -- Comparative study of thermal conductivity of SiC and BeO from ab initio calculations -- Part 15: Materials for Oil and Gas and AMREE Oil & Gas III -- Anisotropic behaviors for X100 high grade pipeline steel under stress constraints -- Co-relation of microstructural features with tensile and toughness characteristics of X70 grade steel -- Development and applications of new generation Ni-containing cryogenic steels in China -- Microstructure analysis and weldability investigation of stainless steel clad plate -- Microstructure and Properties of High Performance Pipeline Steels -- Sensitivity variation of nanomaterials at different operating temperature conditions.…”
Full-text access

Applied Mechanics, Behavior of Materials, and Engineering Systems Selected contributions to the 5th Algerian Congress of Mechanics, CAM2015, El-Oued, Algeria, October 25 - 29 /

İçindekiler: “…-History of Microstructure Evolution and its Effect on the Mechanical Behavior During Friction Welding for AISI 316 -- A Study of Selective Laser Melting Technology on the Ultra-High Strength Tool Steel Use - Quality, Mechanical Properties and Fatigue -- Transferability of Fracture Toughness With Constraint -- Crack Path Stabilisation and T-Stress Estimation in Connection With the Global Approach for Inclined Notches -- Measuring of Strain and Displacements in Welded Joints Subjected to TensileLoad Using Stereometric Methods -- Experimental and Numerical Investigations of Friction Stir Welding of Aluminum to Copper -- Heat-Affected Zone as Critical Location in Pressure Equipment.…”
Full-text access

TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings

İçindekiler: “…Dynamic Behavior of Materials VIII -- Mechanical Properties and Shear Localization of High Entropy Alloy CoCrFeMnNi Prepared by Powder Metallurgy -- Effect of Phase Transformation on High Temperature Dynamic Flow Stresses of CP-Ti -- Shock-induced Mechanical Response and Substructural Evolution of Ti-6Al-4V Alloy -- The Use of Circumferentially Notched Tension Specimen for Fracture Toughness Assessment of High Strength Steels -- A Low-Cost, Laboratory-Scale Method to Identify Regions of Microstructural Changes in Response to Dynamic Loading Conditions -- Part 20. …”
Full-text access

TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings

İçindekiler: “…Dynamic Behavior of Materials VIII -- Mechanical Properties and Shear Localization of High Entropy Alloy CoCrFeMnNi Prepared by Powder Metallurgy -- Effect of Phase Transformation on High Temperature Dynamic Flow Stresses of CP-Ti -- Shock-induced Mechanical Response and Substructural Evolution of Ti-6Al-4V Alloy -- The Use of Circumferentially Notched Tension Specimen for Fracture Toughness Assessment of High Strength Steels -- A Low-Cost, Laboratory-Scale Method to Identify Regions of Microstructural Changes in Response to Dynamic Loading Conditions -- Part 20. …”
Full-text access