Arama Sonuçları - the (creeping OR sweeping) garden~

Fundamentals of Radiation Materials Science Metals and Alloys / Yazar: WAS, GARY S.

İçindekiler: “…Part I Radiation Damage -- 1 The Radiation Damage Event -- 2 The Displacement of Atoms -- 3 The Damage Cascade -- 4 Point Defect Formation and Diffusion -- 5 Radiation-Enhanced and Diffusion Defect Reaction Rate Theory -- Part II Physical Effects of Radiation Damage -- 6 Radiation-Induced Segregation -- 7 Dislocation Microstructure -- 8 Irradiation-Induced Voids and Bubbles -- 9 Phase Stability Under Irradiation -- 10 Unique Effects of Ion Irradiation -- 11 Simulation of Neutron Irradiation Effects with Ions -- Part III Mechanical Effects of Radiation Damage -- 12 Irradiation Hardening and Deformation -- 13 Irradiation Creep and Growth -- 14 Fracture and Embrittlement -- 15 Corrosion and Stress Corrosion Cracking Fundamentals -- 16 Effects of Irradiation on Corrosion and Environmentally Assisted Cracking -- Index. .…”
Full-text access
OPAC'ta görüntüle

Challenges in Mechanics of Time-Dependent Materials, Volume 2 Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /

İçindekiler: “…Chapter 1.Modified Hyper-viscoelastic Constitutive Model for Elastomeric Materials -- Chapter 2.Temperature Dependence of Statistical Static Strengths for Unidirectional CFRP with Various Carbon Fibers -- Chapter 3.Time-Temperature Mechanical Response of a PVA Dual Cross-Link Self-Healing Hydrogel -- Chapter 4.Dissipative Damage Theory for Strongly Time-Dependent Composite Materials -- Chapter 5.Understanding Creep-Fatigue Interaction in Fe-25Ni-20Cr (wt.%) Austenitic Stainless Steel -- Chapter 6.The Development of Time Dependent Constitutive Laws of Jujube Flesh -- Chapter 7.Time-Temperature Dependent Creep and Recovery behavior of MWCNTs-Polypropylene Nanocomposites -- Chapter 8.Comparison of Porcine Brain Tissue with Surrogate Materials in Quasi-Static Compression and Dynamic Mechanical Analysis -- Chapter 9.Modeling of Cavitation Erosion Resistance in Polymeric Materials Based on Strain Accumulation -- Chapter 10.Experimental Investigation of Dynamic Strain Aging in 304L Stainless Steel -- Chapter 11.A Case Study to Evaluate Live Load Distributions for Pre-stressed RC Bridge -- Chapter 12.Experimental Investigation of Segmental Post-tensioned Girders -- Chapter 13.Experimental and Numerical Evaluations of Live Load Distributions of Steel-Concrete Composite Bridge -- Chapter 14.Strain Rate Dependent FEM of Laser Shock Induced Residual Stress.…”
Full-text access
OPAC'ta görüntüle

Advances in Peridynamics. Yazar: Madenci, Erdogan

İçindekiler: “…6.2.2 Viscoelastic Response -- 6.2.3 Elastic-Viscoelastic Material Interface -- 6.3 Tangent Moduli -- 6.4 Numerical Results -- 6.4.1 Relaxation and Creep Responses of a Viscoelastic Prism -- 6.5 Relaxation Response -- 6.6 Creep and Recovery Responses -- 6.6.1 Creep Response of a Nonhomogeneous Prism -- References -- Chapter 7: Direct Imposition of Boundary Conditions without a Fictitious Layer -- 7.1 Introduction -- 7.2 PD Equilibrium Equations under Homogeneous Deformation -- 7.3 Unification of PD Equations -- 7.4 Numerical Implementation -- 7.5 Numerical Results -- 7.5.1 Ordinary Boundary Conditions -- 7.5.2 Mixed Boundary Conditions -- References -- Chapter 8: Peridynamic Modeling of Thermoelastic Deformation -- 8.1 Introduction -- 8.2 Thermoelastic Deformation -- 8.3 Numerical Implementation -- 8.4 Numerical Results -- References -- Chapter 9: Peridynamic Modeling of Elastoplastic Deformation -- 9.1 Introduction -- 9.2 Plane Strain J2 Plasticity Formulation with Isotropic Hardening -- 9.3 Numerical Implementation -- 9.3.1 Return Mapping Algorithm -- 9.3.2 Elastoplastic Tangent Modulus -- 9.3.3 Algorithmic Details -- 9.4 Numerical Results -- References -- Chapter 10: Peridynamic Modeling of Creep -- 10.1 Introduction -- 10.2 Liu and Murakami Creep Damage Model -- 10.3 Incremental Strain and Stress States -- 10.4 NOSB PD Force Density Vector -- 10.5 Numerical Implementation -- 10.6 Numerical Results -- 10.6.1 Uniaxial Creep -- 10.6.2 Creep Deformation of a Rectangular Plate -- References -- Chapter 11: Axisymmetric Peridynamic Analysis -- 11.1 Introduction -- 11.2 Axisymmetric Assumptions -- 11.3 PD Form of Mechanical Power Balance -- 11.4 PD Form of Thermal Power Balance -- 11.5 PD Form of Rate of Internal Energy Density -- 11.6 Axisymmetric PD Equations of Motion -- 11.7 Determination of Force Density Vector -- 11.8 Evolution of Cauchy Stress.…”
Full-text access
OPAC'ta görüntüle

Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications

İçindekiler: “…Superalloy 718 & Derivatives: Keynotes -- Age Hardenable Nickel-based Alloy Developments and Research for New High Temperature Power Cycles -- Superalloy 718; Evolution of the Alloy from High to Low Temperature Application -- Part 2. …”
Full-text access
OPAC'ta görüntüle

Proceedings of the International Conference on Martensitic Transformations: Chicago

İçindekiler: “…Interactions of Phase Transformations and Plasticity -- TRIP Effect in a Constant Load Creep Test at Room Temperature -- Modeling of Strain-Induced Phase Transformations under High Pressure and Shear -- Modeling The Microstructure Evolutions of NiTi Thin Film During Tension -- Residual Stress and Texture Evolution on Surface of 304L TRIP Steel Sheet Subjected to FLC Test -- An investigation on the microstructure and mechanical properties of hot rolled medium manganese TRIP steel -- Correlation between Deformation Texture and Martensitic Transformation in TWIP/TRIP Steels on multiscale -- Phase Transition and Its Interactions with Dislocations -- Thermal Cycling Induced Instability of Martensitic Transformation and the Micro8722mechanism in Solution8722treated Ni51Ti49Alloy -- Influence of grain size on work hardening behavior of Fe-24Ni-0.3C metastable austenitic steel -- The Influence of a' (bcc) Martensite on the Dynamic and Magnetic Response of Powder Metallurgy FeMnSiCrNi Shape Memory Alloys -- Critical Analyses on the Instrumented Ultramicrohardness Results on Aging NiTi Alloy in Distinct Phase Fields -- Effect of Thermomechanical Treatment on Mechanical Properties of Ferromagnetic Fe-Ni-Co-Ti Alloy -- Part 4. …”
Full-text access
OPAC'ta görüntüle

Energy Materials 2017

İçindekiler: “…Part 1: Energy and Environmental Issues in Materials Manufacturing and Processing: Opportunities in the Steel Industry -- Waste Energy Recovery Technology of Iron and Steel Industry in China -- Green Manufacturing Process of Shougang Jingtang Steel Plant -- The Introduction and Process Optimization Research of Oxygen Blast Furnace Ironmaking Technology -- Prediction and optimal scheduling of byproduct gases in steel mill: Trends and challenges -- Processing Non-Oriented Electrical Steels Using Inclined/Skew Rolling Schemes -- A Possible Way for Efficient Utilization of Coal Energy: The Combined Process of Ironmaking with Gasoline Synthesis and Electricity Generation -- The influence of water vapour on the fuming rate in a ferromanganese system -- Part 2: Energy and Environmental Issues in Materials Manufacturing and Processing: Opportunities in Aluminum Production, Waste Heat and Water Recovery -- Approach for pyrolysis gas release modelling and its potential for enhanced energy efficiency of aluminium remelting furnaces -- Numerical approach for the implementation of the interaction of pyrolysis gases and combustion products in an aluminium melting furnace -- Fluoropolymer Coated Condensing Heat Exchangers for Low-grade Waste Heat Recovery -- Nitrate and other anion removal from waste water using the Hydroflex technology -- Mechanical Analysis of Raceway Formation in Bulk Bed of Blast Furnace -- Part 3: Materials for Coal-Based Power: Materials For Coal-Based Power: Session I -- Ni-Fe based alloy GH984G used for 700 coal-fired power plant -- Part 4: Materials for Coal-Based Power: Materials For Coal-Based Power: Session II -- Creep strength and oxidation resistance of industrially made G115 Steel pipe -- Accelerated creep test for new steels and welds -- Part 5: Materials for Coal-Based Power: Materials For Coal-Based Power: Session IV -- The Reliability Analysis of 12Cr1MoVG and T23 Used for USC Boilers Water Wall -- Part 6: Materials for Coal-Based Power: Poster Session -- Effect of high-frequency induction hardening on stress corrosion of a 12% Cr martensitic stainless steel -- Fireside corrosion behaviors of Inconel 740 H superalloy in various SO2 contents -- High Cycle Fatigue Behavior of HAYNES282 Superalloy -- Recent Development in the Characteristics of Alloy 625 for A-USC Steam Turbine Castings -- Part 7: Materials for Gas Turbines: Coatings -- EVOLUTION OF THE THERMAL CONDUCTIVITY OF Sm2Zr2O7 UNDER CMAS ATTACK -- Part 8: Materials for Gas Turbines: Hot Corrosion and New Materials -- Development of a new high strength and hot corrosion resistant directionally solidified superalloy DZ409 -- Part 9: Materials for Gas Turbines: Microstructure and Processing -- Modeling the Diffusion of Minor Elements in Different MCrAlY - Superalloy Substrates at High Temperature -- ON HEALING MECHANISM OF CAST POROSITIES IN CAST NI-BASED SUPERALLOY BY HOT ISOSTATIC PRESSING -- The Influence of Dendritic Segregation Degree to the Recrystallization Nucleation in U4720LI -- Part 10: Materials for Gas Turbines: Poster Session -- Stress Rupture Properties of Alloy 783 -- Study on the Undercoolability and Single Crystal Castability of Nickel-Based Superalloys -- Part 11: Materials for Nuclear Energy: Materials for Nuclear Applications I -- Enhancing the High-Cycle Fatigue Property of 316 Austenitic Stainless Steels through Introduction of Mechanical Twins by Cold-Drawing -- Part 12: Materials for Nuclear Energy: Materials for Nuclear Applications II -- Microstructure Evolution of a Reactor Pressure Vessel Steel during High-temperature Tempering -- Part 13: Materials for Nuclear Energy: Environmental Effects -- Effect of Steam Pressure on the Oxidation Behaviour of Alloy 625 -- Friction Stir Processing of Degraded Austenitic Stainless Steel Nuclear Fuel Dry Cask Storage System Canisters -- Part 14: Materials for Nuclear Energy: Accident Tolerant Fuels & Irradiation Effects -- The Mechanical Response of Advanced Claddings during Proposed Reactivity Initiated Accident Conditions -- First principles investigations of alternative nuclear fuels -- Comparative study of thermal conductivity of SiC and BeO from ab initio calculations -- Part 15: Materials for Oil and Gas and AMREE Oil & Gas III -- Anisotropic behaviors for X100 high grade pipeline steel under stress constraints -- Co-relation of microstructural features with tensile and toughness characteristics of X70 grade steel -- Development and applications of new generation Ni-containing cryogenic steels in China -- Microstructure analysis and weldability investigation of stainless steel clad plate -- Microstructure and Properties of High Performance Pipeline Steels -- Sensitivity variation of nanomaterials at different operating temperature conditions.…”
Full-text access
OPAC'ta görüntüle

International Congress on Polymers in Concrete (ICPIC 2018) Polymers for Resilient and Sustainable Concrete Infrastructure /

İçindekiler: “…-- A Perspective on 40 Years of Polymers in Concrete History -- Development Length of Steel Reinforcement in Polymer Concrete for Bridge Deck Closure -- Developmentof Ultra Rapid-Hardening Epoxy Mortar for Railway Sleepers -- Contribution of C-PC to Resilience of Concrete Structures in Seismic Country Japan -- Precast Polymer Concrete Panels for Use on Bridges and Tunnels -- Part IV Polymer Fiber Concrete -- The Effect of Combinations of Treated Polypropylene Fibers on the Energy Absorption of Fiber Reinforced Shotcrete -- Bond Performance of Steel Reinforced Polymer (SRP) Subjected to Environmental Conditioning and Sustained Stress -- High-Strength Strain-Hardening Cement-Based Composites (HS-SHCC) Made with Different High-Performance Polymer Fibers -- Uniaxial Tensile Creep Behavior of Two Types of Polypropylene Fiber Reinforced Concrete -- Dynamic Behavior of Textile Reinforced Polymer Concrete Using Split Hopkinson Pressure Bar -- Steel-Fiber Self-Consolidating Rubberized Concrete Subjected to Impact Loading -- Effect of Fiber Combinations on the Engineering Properties of High Performance Fiber Reinforced Cement Composites -- Application of Fibre Reinforced Polymer Reinforced Concrete for Low Level Radioactive Waste Disposal -- Efficiency of Polymer Fibers in Lightweight Plaster -- Part V Polymer Concrete with Recycled Waste -- Properties of Ceramic Waste Powder Based Geopolymer Concrete -- Use of Recycled Polymers in Asphalt Concrete for Infrastructural Applications -- Influence of Method of Preparation of PC Mortar with Waste Perlite Powder on Its Rheological Properties -- Design and Manufacture of a Sustainable Lightweight Prefabricated Material Based on Gypsum Mortar with Semi-Rigid Polyurethane Foam Waste -- Cement Mortars Lightened with Rigid Polyurethane Foam Waste Applied on Site. …”
Full-text access
OPAC'ta görüntüle

8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials

İçindekiler: “…Picado-Santos -- Compaction of Open-Graded HMAs evaluated by a fuzzy clustering technique, by A. …”
Full-text access
OPAC'ta görüntüle

TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings

İçindekiler: “…Additive Manufacturing of Metals: Fatigue and Fracture -- Evaluation of The Mechanical Properties of 15Cr-5Ni Stainless Steel Produced by Direct Metal Laser Sintering -- Creep and Thermomechanical Fatigue of Functionally Graded Inconel 718 Produced  by Additive Manufacturing -- Part 4. …”
Full-text access
OPAC'ta görüntüle

Magnesium Technology 2017

İçindekiler: “…Part 1: Magnesium Technology 2017: Keynote Session I -- Multi-scale Investigation on Yield "Symmetry" and Reduced Strength Differential in an Mg-Y Alloy -- Targeting High Impact R&D for Automotive Magnesium Alloys -- Magnesium Development as a Lightweight Material - In Competition with Other Structural Materials -- The Continued Quest for Low-Temperature Formability in Mg Alloys: Historical Developments and Future Opportunities -- Part 2: Magnesium Technology 2017: Alloy Development -- Using the Crystal Plasticity Approach to Parse the Effects of Alloying and Aging on the Mechanical Behavior of Wrought Mg Alloys -- Development of high-strength high-speed-extrudable Mg-Al-Ca-Mn alloy -- Development of ultra-high strength and ductile Mg-Gd-Y-Zn-Zr alloys by extrusion with forced-air cooling -- Effect of Extrusion Ratio on Microstructure and Resulting Mechanical Properties of Mg Alloys with LPSO Phase -- Mechanically Alloyed Magnesium Based Nanostructured Alloy Powders for Stent Applications -- Combined Effects of Grain Size Refinement and Dynamic Precipitation on Mechanical Properties of a New Magnesium -- Alloy -- Machinability Investigation in Micro-milling of Mg based MMCs with Nano-sized Particles -- Part 3: Magnesium Technology 2017: Solidification and Processing I -- Microsegregation in High Pressure Die Cast Mg Alloys -- Numerical simulations of TRC equipped with a core -- Growth of Al8Mn5 intermetallic in AZ91 -- Influence of CaO grain refiner addition on the microstructure and mechanical properties of as-cast Mg alloys -- Grain refinement of Mg and its alloy by inoculation of in-situ MgO particles -- Numerical study of magnesium production by Pidgeon process and pre-prepared pellets silicothermic process: comparison of heat transfer -- On the age hardening response of aluminum containing magnesium sheets with zinc or manganese (AZ- and AM series alloys) -- Performance evaluation of high-pressure die-cast magnesium alloys -- Simulation Study on Direct Desulfurization ofMolten Iron by Magnesium Vapor -- Part 4: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue I -- Twinning super dislocations to help understand strength -- Basal Dislocation Transmutation through {1012} Twin Boundaries -- Ductility Enhancement in Mg alloys by Anisotropy Engineering -- Modeling the effect of alloying elements in magnesium on deformation twin characteristics -- Simulating Discrete Twin Evolution in Magnesium using a Novel Crystal Plasticity Finite Element Model -- The effect of {10-12} twin boundary on the evolution of defect substructure -- Part 5: Magnesium Technology 2017: Solidification and Processing II -- Processing of Mg-sheet via Twin Roll Casting -- Effects of Mn and Zn Solutes on Grain Refinement of Commercial Pure Magnesium -- Experimental investigation of continuous magnesium production by carbothermal reduction -- Precipitation behavior of Mg-Al-Sn-Zn(-Na) alloys -- Study on the Direct Oxidation Thermal Decomposition of MagnesiumChloride byproduct in the Sponge Titanium -- Thermal decomposition kinetics of pre-prepared pellets for the novel silicothermic process -- Thermal Stability of Cryomilled Mg Alloy Powder -- Thermomechanical Processing of Thixomolded Alloys -- Part 6: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue II -- Dynamic behavior of an AZ31 alloy under varying strain rates and stress triaxialities -- Enhancing the tensile response of magnesium through simultaneous addition of aluminium and alumina nanoparticulates -- Effect of solutes additions on the microstructure and mechanical properties of cast Mg-Al based alloys -- Enhanced mechanical properties of extruded Mg-9mass%Al-1mass%Zn-2mass%Ca alloy -- Influence of strain path change on the microstructure and mechanical properties of duplex Mg-Li alloy -- Mechanical Properties and Deformation Mechanism of Mg-Y Alloy with Various Grain Sizes -- Microstructure and Mechanical Properties of High Pressure Die Cast Mg-Al-Sn-Si Alloys -- Microstructure and mechanical properties of an extruded Mg-1.58Zn-0.52Gd alloy -- Modelling Magnesium Alloys for Improved Isotropic and Symmetric Yield Behaviour -- Part 7: Magnesium Technology 2017: Solidification and Processing III and Magnesium-Rare Earth Alloys I -- Scaled-Up Fabrication of Thin-Walled ZK60 Tubing using Shear Assisted Processing and Extrusion (ShAPE) -- Biocompatible Magnesium Alloy ZNdK100 - Adaptation of Extrusion Parameters to Tailor the Mechanical Properties to Different Implant Applications -- Characterization of Semi-closed Die-Forged ZK60 Mg Alloy Extrusion -- Optimization of Nitrogen bubbling conditions for extruded Mg alloy with balanced mechanical properties -- Effects of Gadolinium and Neodymium Addition on Young's Modulus of Magnesium-based Binary Alloys -- Aging behavior of Mg alloys containing Nd and Y -- Variation of Rare Earth Elements in the Magnesium Alloy ME21 for the Sheet Production -- Phase stability and formation in Mg-Gd-Zn alloys - key data for ICME of Mg alloys -- Part 8: Magnesium Technology 2017: Corrosion -- An Electrochemical Investigation of Mg-Ni Hydrogen Storage Alloys by Mechanical Alloying -- Corrosion and creep resistance of thixomolded® magnesium alloys -- Corrosion Properties of Mg-6Al-0.3Mn-aSn-bZn Alloys -- Corrosion of magnesium-aluminum (Mg-Al) alloys - An interplay between Al content and CO2 -- Excimer Laser Processing of Al containing Mg Alloys for Improved Corrosion Resistance -- Effect of Al and Sn on discharge behavior of Mg alloy as anode for Mg-Air battery -- Utilization of a Partially Non-aqueous Electrolyte for the Spatial Mapping of Mg Corrosion using a model Mg-Al Electrode -- Voltammetric Studies of Extruded Pure Magnesium in Different Electrolytes and Its Corrosion Morphology -- Part 9: Magnesium Technology 2017: Magnesium-Rare Earth Alloys II -- Microstructure and mechanical properties of Mg-Zn-Gd alloys after rolling or extrusion processes -- A comparative study on the microstructure, mechanicalproperties, and hot deformation of magnesium alloys containing zinc, calcium and yttrium -- Addition of Holmium & Erbium and Hot-rolling effects on the Microstructure and Mechanical Properties of Mg-Li based Alloys -- Bonding environments in a creep-resistant Mg-RE-Zn alloy -- Microstructural and Numerical Investigation on the Shear Response of a Rare-Earth Magnesium Alloy Sheet -- Solute effect on strength and formability of Mg: A first-principle study -- Understanding on the role of rare earth elements in activation of slip in magnesium: An atomistic approach -- Stabilisation of disordered BCC phases in magnesium-rare earth alloys -- The Effects of Ca Addition on Microstructures and Mechanical Properties of Gravity Cast Mg-Zn-Y Alloy -- Part 10: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue III -- Microstructure and Texture Evolution during Hot Deformation of Cast-Homogenized ZK60 Magnesium Alloy -- Development of Texture during Tensile Test at Room Temperature -- Effect of Ca on the microstructure, texture and mechanical properties in Mg-Zn-Mn based alloy -- Evaluation of in vitro fatigue properties of biodegradable Mg-0.3at.…”
Full-text access
OPAC'ta görüntüle

TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings

İçindekiler: “…Additive Manufacturing of Metals: Fatigue and Fracture -- Evaluation ofThe Mechanical Properties of 15Cr-5Ni Stainless Steel Produced by Direct Metal Laser Sintering -- Creep and Thermomechanical Fatigue of Functionally Graded Inconel 718 Produced by Additive Manufacturing -- Part 4. …”
Full-text access
OPAC'ta görüntüle

SAE International's Dictionary for Automotive Engineers. Yazar: Kershaw, John F.

İçindekiler: “…Capacitor Capsule MAP Sensor -- Carbon -- Carbon-Core Wire -- Carbon Dioxide (CO 2) -- Carbon Monoxide (CO) -- Carbon Residue -- Carburetor -- Carburizing -- Carcass -- Carcass Plies -- Case-Hardening -- Case/Model-Based Diagnostic Reasoning -- Caster -- Caster Sweep -- Catalyst -- Catalytic Converter -- Catalytic Substrate -- Cat-Back Exhaust System -- Catch Tank -- Cathode -- Cathode Ray Tube (CRT) -- Cavitation Erosion -- CCA (Cold Cranking Amps) -- CCC (C3) -- CCM (Comprehensive Component Monitor) -- CDI (Capacitor Discharge Ignition) System -- CDR (Crankcase Depression Regulator) -- CEEMAT (Converter Enhanced Electronically Managed Automated Transmission) -- Cell -- CEMF (Counterelectromotive Force) -- Center Bearing -- Center Bolt -- Center of Gravity -- Centerline Steering -- Centerlink (Relay Rod or Draglink) -- Central Processing Unit (CPU) -- Centrifugal Force -- Centrifugal (Mechanical) Advance -- Centrifugal Oil Filter -- Centrifugal Supercharger -- Centripetal Force -- Cetane -- Cetane Improvers -- CFR (Cooperative Fuel Research) Engine -- Chain and Sprocket Drive -- Chain Tensioner -- Chamfered Edge -- Chapman Strut -- Charles's Law -- Chassis -- Chassis Ground -- Check Engine Light -- Check Valve -- Chlorofluorocarbon (Freon Refrigerant) -- Choke -- CHT (Cylinder Head Temperature) Sensor -- Circuit -- Circuit Breaker -- Circuit Number -- Circuit Resistance Tests -- Circuit Sensing -- Circular Mil -- Circumference -- CKP (Crankshaft Position) Sensor -- Class 2 Serial Communications -- Class B Data Communications Network Interface -- Clearance Volume -- C-Lock Axle -- Clock Generator -- Clock Spring -- Closed Loop -- Closing Ramp -- Cloud Point -- Clutch -- Clutch Brake -- Clutch Disc -- CNG (Compressed Natural Gas) -- CO (Carbon Monoxide) -- Cocktail Shaker Piston -- COE (Cab-Over-Engine) -- Coefficient of Friction -- Cogged Belt.…”
Full-text access
OPAC'ta görüntüle

Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors

İçindekiler: “…PWR Nickel SCC - Aging Effects -- A Kinetic Study of Order-disorder Transition in Ni-Cr Based Alloys -- The Role of Stoichiometry on Ordering Phase Transformations in Ni-Cr Alloys for Nuclear Applications -- The Effect of Hardening via Long Range Order on the SCC and LTCP Susceptibility of a Nickel-30Chromium Binary Alloy -- PWSCC Initiation of Alloy 600: Effect of Long-term Thermal Aging and Triaxial Stress -- Stress Corrosion Cracking Behavior of Alloy 718 Subjected to Various Thermal Mechanical Treatments in Primary Water -- Time- and Fluence-to-fracture Studies of Alloy 718 in Reactor -- Developmentof Short-range Order and Intergranular Ccarbide Precipitation in Alloy 690 TT upon Thermal Ageing -- Part. 4. …”
Full-text access
OPAC'ta görüntüle

Modeling High Temperature Materials Behavior for Structural Analysis Part I: Continuum Mechanics Foundations and Constitutive Models / Yazar: Naumenko, Konstantin, Altenbach, Holm

Full-text access
OPAC'ta görüntüle